Used Blown Film Extrusion for sale (1,677)

Year of construction: 1994, Condition: good (used), Max reel diameter 1600mm Die gap 1.25-2.26 Die diameter 350mm Thickness 25-130 micron Speed 250kg/hr Itslhccqep Du A Toteg

Condition: ready for operation (used), Year of construction: 2001, A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Kiefel Worms 80.25D outer layer extruder, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Reinhold SRK 200/9.6 film calibrating device. The entire line is controlled by a Plast Control system. Further components: integrated width measurement, C-scan for profile measurement, web center control, corona pre-treatment, film pre-draw. Including a replacement FSBK 5-layer blow head with IBC, replacement rollers, annular gap blower with filter, suction units, crane and external system terminal. Documentation available. On-site inspection is possible. Iolhccsv T An Sjqtstg

Year of construction: 2011, Condition: good (used), The extrusion line No. 1 was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Itjlepah U Tjhccqteg Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system INFRA STRUCTURE (ADDITIONAL UNITS): Dryer 1 – 4 with 4500-liter volume; heating capacity 48kw
 Dryer 5 with 2500-liter volume; heating capacity 20kw
 Dryer 6 with 1500-liter volume; heating capacity 15kw
 Each extruder has a gravimetrical batch-dosing unit with 3 stations. Each extruder has a melting pump and a 2-piston filter change system. MAIN LINE COMPONENTS MANUFACTURERS: SML: extruder; Chair, rollers, winding device GWK: cooling extruder KREYENBORG: screen changer Cloeren: feed block, slot die PIOVAN: dryer, dosing device SERVE: Edge band cutting device MATHO: suction RAPID: Edge strip shredder KONGSHILDE: Recyling edge strips, start rollers INFSTAUB: filling station SMK: chillers SIEMENS: control OCS: camera system SEMET: labeling system AFS: Corona Sation BETA CONTROLL: Radiometric thickness measurement SML: autom. FYLING SPLICE winding unit, BECKOFF control SIMCO: antistatic ALTEK: automatic roll manipulator (transfer carriage)

Condition: as good as new (ex-display), Year of construction: 2012, 3-channel slot-die head EDS FSK-600 with flex-lip (Reifenhauser) Output rate: 40 – 50 kg/h Die lip adjustment via screws and retention bar in the main layer Film width: max. 600 mm Film thickness: 0.1 – 3.0 mm 3 computer calculated hanger manifolds for optimized melt distribution Split: A 10-15%, B 70-80%, C 10-15% Die lip prepared for liquid temperature control 9 x heating zones Total electrical power for slot-die: 18 kW (0.5 kW x 36) Completely wired for 240 V /single phase Dimensions for die (l x b x h): 450 x 650 x 400 mm, weight: 760 kg Co-extrusion feedblock for one middle and two outer layers Remark: Ieljfqllzjhccqtstg tool-stell 1.2311 - top quality All flow areas are chrome-plated (25-30 m) Condition: unused, as good as new

Year of construction: 2014, Condition: excellent (used), Functionality: fully functional, FILMEX Film Extrusion Lines - Cast Film Type: FILMEX 5 1500 / 2100 Manufacturer: W & H Year / MR: / 2014 Price: Contact us for price. Parameter: Number of layers:5 Film structure: A-B-C-D-E Description: EN: The machine is in very good technical condition, under power, possible to test it. The price of a new machine was 2,500,000 EUR Extruder 1 Layer ref: : A Screw diam 1:120 Extruder 2 Layer ref: : B Screw diam 2:50 Extruder 3 Layer ref: : C Iolhccqev Azk Dotetg Screw diam 3:70 Extruder 4 Layer ref: :D Screw diam 4:50 Extruder 5 Layer ref: : E Screw diam 5:70 Main description: Automatic with external wooden deck 1800mm The extrusion unit is movable in 2 directions for better maintenance. The extrusion units have safety handrails and ladders for better access and production control. 1.Extruder Automatic material feeding system 5 sets Alarm before stock runs out - 5 sets Thread diameter: 3 sets, set ceramic heated Heating Ceramic unit with digital temperature adjustment 2.Casting Cooling main cooling cylinder aluminum surface - 1 set control motor: speed control Additional cooling cylinder motor control, speed control Drive cylinder 3.Film thickness control 4.Ionization unit - corona 5.Winding system traction rollers resistant to corrosion traction motor automatic cutting system automatic winding system - friction system winding motor

Year of construction: 1981, Condition: refurbished (used), Functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Itolheu Ttf Noccqteg Take-off device and impact shears

Year of construction: 2007, Condition: good (used), TECHNICAL DATA Extruder "A" 135/33 L/D • Output max. LLDPE 950 kg/h Extruder "B" 60/28 L/D • Output max. VLDPE 200 kg/h Extruder "C" 60/28 L/D • Output max. LLDPE 200 kg/h Raw materials: LLDPE MFI 2 - 5 g/10min VLDPE MFI 2 - 5 g/10min Coex Structure 3 layer Film thickness range for stretch wrap film 11 - 45 μm Final film width 4 x 500 mm // 8 x 250 mm // 2 x 750mm + 1 x 500mm // 2 x 750 mm + 2 x 250mm • Flat die lip width 2.550 mm • Roller width 2.700 mm • Chill roll C1 Ø 1.000 mm Itolsqk T Dishccqtjg • Chill roll C2 Ø 400 mm • Mechanical speed max. 600 m/min • Installed electrical power for one line approx. 1.022 kW • Utilisation factor approx. 40 - 50 % of total value • Necessary cooling capacity approx. 492 kW approx. 422.882 kcal/h • Compressed air consumption approx. 60 Nm³/h

Year of construction: 2014, Condition: used, Functionality: fully functional, Glatt GCSmart 500 drum coater drum coater in EX version. The machine is in very good condition and fully operational. Ijlhcer Hn Ebjcqtetg

Condition: used, overall weight: 11,000 kg, empty load weight: 5,720 kg, maximum load weight: 5,280 kg, axle configuration: 2 axles, first registration: 04/2021, suspension: air, tire size: 235/75 R 17,5, color: black, Year of construction: 2021, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * From 1 owner * Condition, see photos * Special low bed lowloader trailer from the premium brand GLORIA, type SO42 * New price in 2021 at € 174,000 net * Transport for lowered vehicles possible due to low loading height * Individual design and manufacture of Phantom Rider * Loading and unloading of the vehicle in less than 10 minutes * Vehicle doors can always be opened * Low bed length approx. 5,500mm x width 2,080mm * Distance between platform and roadway variable from 0 to 25 centimeters while driving up to 20 km/h * Normal driving height from 6 to 10 centimeters * Extremely smooth driving behavior thanks to air suspension and high deadweight of 6,000kg * Turntable for the front wheels of the vehicle makes steering movement possible during play * Rear axle can be hydraulically extended to the side * No excess width, unrestricted participation in road traffic * Steering can be controlled via master and slave hydraulics and can be adjusted for real effects * Steering can be locked * Compressed air connection * Tubular frame for 12x8 or 8x8 covering above the platform, height adjustable, can be quickly dismantled * Tubular frame for 8x8 covering in front of the platform, can be quickly dismantled * 24V battery for self-sufficient operation, thus also data bus release simulation * Total weight 11,000kg * Empty weight 5,720kg * Payload 5,280kg * * German vehicle * original ONLY 330,248 km * Body/structure: tractor unit * Engine 10.7 ltr. - 315 kW R6 diesel (OM 470) * EURO 6 standard * Trailer coupling * Total train weight 40,000kg * Axle load measuring device * Mercedes-Benz PowerShift gearshift * Gearbox 12-speed - Type: G 211-12 * Air conditioning * Driver assistance system: Attention Assist (fatigue detection sensor) * Driver assistance system: Lane departure warning * Driver assistance system: Stability control assistant * Residual heat utilization * Cruise control system (cruise control) * Electric windows If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV.  You can find more trucks on our homepage at Itelhjv Dvuyeccqtsg We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false ideas about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: as good as new (ex-display), Year of construction: 2025, SEAL/62 Base Construction Year: NEW The Seal 62 Base is a user friendly, 61" top heat roller laminator capable of cold laminating and mounting. Its features and ease of use make it ideal for small to midsized users. The SEAL 62 Base is ideal for mounting and laminating pressure-sensitive GMR S-LTD-266 The SEAL 62 Base is ideal for mounting and laminating pressure-sensitive graphics up to 61". It represents a flexible package at an affordable price without compromising its functionality. Equipped with adjustable pressure and speed settings for maximum versatility and a 2" nip opening to cover a wide range of substrates. The SEAL 62 Base is easy-to-use and will deliver genuine flexibility and high performance levels for the small to medium sized user. Designed with sturdy uni-frame construction, this laminator includes comprehensive safety system with self-checking eyes and emergency stops. TUV SUD Certified. Heat assisted top roller for superb lamination performance 61" working width to handle a wide range of media Adjustable pressure and speed settings with maximum operating speed of 16.4'/minute 2" nip with manual adjustment suitable for working with a sled for road signs Auto-grip shafts for user-friendly webbing Swing-up feed table to facilitate easy set up Foot switch for hands-free operation Self-checking safety eyes for increased operator safety Itolsvzkziohccqtog Easy to use ergonomic control panel

Condition: good (used), Extrusion Line with Extruder & Co-Extruder. Sheet configuration B/A/B used for PP. Direct cooling unit (SMK) and SBI measuring unit newly installed in 2015. * Max. output: 1350 kg/h * Main screw output: 950 kg/h * Main screw: 180mm / 33D * Co-extrusion output: 400kg/h * Co-extruder scew: 120mm / 33D * Die width: 650mm Ieljn Utt Hshccqtetg * Roll stack: 3 * Winding unit for Jumbo rolls up to 1500kg This Extrusion Line is already disassembled and secured for transport (Location: Waalwijk, Netherlands).

Condition: ready for operation (used), screw diameter: 120 mm, clamping force: 800 kN, Blow molding machine - extrusion blow molding machine BEKUM BA 200 8 l accumulation head 1 head and 1 station Processed material: PE Production capacity: 500 kg / h Extruder type: Accumulator Number of extruders: 1 Screw diameter: 120 mm L / D ratio: 24 Thickness control: yes material feed Opening stroke: 710 mm Itelhcsv Hpnrjcqtsg Clamping force: 800 KN

Condition: refurbished (used), Functionality: fully functional, Extrusion Screen Changers - Continuous Screen Changers Ielhccqsh Itl Sjtetg Double Piston Filter - - Immediately available, on request also with control, hydraulic unit. When making your request, please let us know your desired capacity and the material so that we can offer you the right filter.

Year of construction: 2009, Condition: good (used), - Fully automatic - Package height max. (mm): 650 Itslhcjpu Anmscqtsg - Package height min. (mm) :15 - Package width max. (mm): 1250 - Package length min. (mm): 300 - infeed conveyor (mm): approx. 2.000 x 1.300 x 900 - Outfeed conveyor (mm): approx. 2.000 x 1.300 x 900 - Outfeed table - Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 - Total connected load (kW): approx. 5

Year of construction: 2021, Condition: ready for operation (used), Functionality: fully functional, Machine no longer required. Ideal dual sided protective film applicator. Itslsv U Spbohccqtjg

Condition: used, Year of construction: 2016, IAG Heinlein Film Bag Machine with Joker Eco Friction Feeder VPM 400 - Film Packaging Machine Extra Wide – Extra Compact Bag Separation by Knife Bag Chain and Double Bag Function Pre-selection Counter for the Desired Bag Quantity Safety Device for Cross-Sealing Film End Indicator Width: 1000mm Depth: 1000mm Height: 1000mm Weight: Approx. 100kg Power Supply: 400V / 50Hz Islhccqjwi E Ncotstg Power Consumption: Approx. 800 VA Film Thickness: 50-130 microns Bag Width: 100-470mm Additional Modules: Bag Printing Inserting Operating Instructions

Condition: good (used), Year of construction: 2013, Film Shrink Tunnel Manufacturer: Beck Type: HV 601 Year of Construction: 2013 Maximum tunnel width: 600 mm Maximum tunnel height: 280 mm Ijlerntfyshccqtotg Heated tunnel hood length: 1,000 mm Transport length: 2,100 mm Heating output: 4 - 12 kW, adjustable Connected load: 13 kW ä200525

Condition: good (used), Year of construction: 1996, age 1997 film wrapping machine L sealer Ijlouqn Ibohccqtotg hand feeding shrinking tunnel mobile sub-frame

Condition: used, Only for export! Itolhcowhuqyscqteg G&J ML550 Film Processor with daylight Cassette, incl. Developper and Fixer

Condition: good (used), Year of construction: 2017, The Milacron UMS16D twin-station extrusion blow molding machine was upgraded by the manufacturer to a standard 20-ton capacity. The machine features an additional cooling system from Eisbär to prevent moisture in the mold area. Manufacturer: Milacron Year of manufacture: 2017 Type: UMS 16.D Screw diameter: 100 mm Itelhccjv Ehbueqtsg Length-to-diameter ratio: 24 Max. screw speed when using high-pressure polyethylene: 72 rpm Max. plasticizing capacity with HDPE: 290 kg/h Tank hydraulic system capacity: 540 l Mold closing pressure: 200 kN Max. mold height: 485 - 535 mm Max. mold width: 510 mm Machine dimensions: 6300 x 8000 x 4700 mm Machine hours: 6000 h The overall picture shows the complete system with peripheral equipment: -The Milacron UMS16D blow molding machine (front right) -A leakage test/tightness test -The Spot Watcher IntraVis camera inspection (rear left) -The entire conveyor belt -and the Delta Engineering DCP200 flexible packaging machine from 2018, in the front left of the photo. The system also includes: -5 12,500 L silos and 2 25,000 L silos for plastic granules. -a blower with a mixing unit for plastic granules. The entire system can be purchased as a whole or individually. We would be happy to provide further information.

Year of construction: 2000, Condition: refurbished (used), • Manufacturer: SICA Iolhcceix I I Ieqtetg • Type : C800 • Year : 2000 • 6 caterpillar • Up to 800mm • Motor power : 8,5kW • Great condition

Condition: excellent (used), Functionality: fully functional, Different MAAG Melt Pumps available Itelhccqsdq Ak Ustjg - For example Extrex 110 , 90 , 70 , 56 , 36 - Possible to order complete on a frame with , motor , gear , cardan and a controll cabinett.

Condition: used, with 175mm Erwepa single screw extruder, gear pump, 2400mm die, 2400mm x 500mm rolls haul off in line knives. * 175mm primary extruder Erwepa Davis Standard 40 D vented with 350kw dc motor and drive. Temperature panel. Hydraulic lantern slide screen changer, Large 90/90 gear pump with gearbox and drive. Gravimetric Maguire 4 zone blender with hopper loaders. Iteljv Twnmshccqteg * 2400mm wide Reifenhauser 3 roll polishing stack with thermoregulation, haul off. 2400mmx500mm individual drives. Variable speed haul off. In line knives. Large pneumatic roll closing. * Upgraded pump group - 3 zone

Condition: good (used), Year of construction: 2010, width 40 cm age 2010 altitude up to approx. 20 cm film wrapping machine Ijlhccsu A Rmxsqtjtg side sealer computer control with touch screen fully automatic infeed belt shrink tunnel ager shrink tunnel age 2019 Delivery time: immediately

Condition: good (used), Strech film machine Islhop T Tz Aeccqtjtg Brand:Nissen Type:2400 Serie no:1469 Year:1999 Techn info: Rotating plate 2400mm in diameter Max hight wrapping approx. 2000mm Total hight column 2450mm Stock no:2001830BXM