Used Corrugated Nailers for sale (336)

Condition: new, empty load weight: 250 kg, maximum load weight: 1,250 kg, overall weight: 1,500 kg, loading space length: 3,010 mm, loading space width: 1,260 mm, loading space height: 300 mm, tire size: 145/80R13, Braked low-loader tandem from the manufacturer ANSSEMS model GTT1500 301x126. The standard equipment of the Anssems box trailer with brake includes aluminum drop sides, internal locks, external lashing eyes, profile channels for attaching accessories or load securing, support wheel and a V-drawbar. Hedpfx Ageq Slqto Uofb We also offer accessories for Anssems car trailers such as tarpaulin and frame, flat tarpaulin, net hooks, corrugated grid attachment, side wall attachment, support set, tool box, lashing straps and anti-theft device at a reasonable price.

Condition: new, machine/vehicle number: ebf3f771e96394cd89e56bbb7, overall weight: 11,800 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle trailer Welded fine-grained steel construction 6 pairs of lashing eyes bolted to the outside of the floor/outer frame, 5 tons each 2 pairs of lashing eyes additionally bolted to the floor, 5 tons each in the corners Gear support foot at the front Folding rear support 2 wheel chocks with holder Steel underride guard Rear spray flaps across the entire width Quarter-shell mudguards 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Towing device central axle trailer Towing bar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension Drum brake axles, manufacturer's choice Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Floor Steel/ checker plate floor for high point load capacity Note: Slight floor corrugation possible due to welding distortion! Platform length approx. 5,200 mm Rear sloping to approx. 900 mm Front wall / front corner stanchions 25 mm aluminum hollow profile, 400 mm high, Hodpfx Agei Rixrs Ujfb Drop sides 25 mm aluminum hollow profile, 400 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions attached to the frame and with bracket for locking the drive-on ramps, drive-in width approx. 2,430 mm Drive-on ramps 2 steel ramps 2,300 mm long, 510 mm wide, can be moved sidewayswith grab handle on the ramps covered with 3 toothed steel rails With gas pressure jack for one-man operation Country of registration/plates Country of registration: Germany 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Front wall aluminum Side wall anodized aluminium Drive-on ramps Hot-dip galvanized Attention! These are archive pictures.

Year of construction: 1988, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1624, For sale: Two identical WUPA PS 6.2 punching machines On request, we offer two identical punching machines of the type WUPA PS 6.2 for sale. One of the machines was completely overhauled in 2020. All essential components were renewed – including gripper punches, gripper chains, the platen, as well as all ball bearings. The machine has been in excellent condition ever since. The electronics have not been rebuilt or changed. Everything is original. Documentation is complete. Both digital and analog, we have circuit diagrams and exploded drawings. Technical data: Model: WUPA PS 6.2 Year of manufacture: 1979 Max. sheet size: 1,450 x 1,050 mm Min. sheet size: 600 x 400 mm Hfedpfx Agswnfgro Ujb Max. capacity: 4,000 sheets/h Max. cutting force: 350 t Material thicknesses: – Paper from 80 g/m² – Cardboard up to 2,000 g/m² – Corrugated board up to EB flute Equipment: – Non-stop feeder – Non-stop delivery Note: All information provided without guarantee. Subject to errors and prior sale. If you are interested or have any questions, we will be happy to assist you. Best regards

Condition: new, Year of construction: 2022, - Delivery 500 mm - Climbing belt 1300 mm - Feed 600 mm - useful width 450 mm / total width 505 mm - delivery height : min: 700mm max : 1000mm - cleats 30 mm high (from a useful width of 350 mm the cleats are divided in the middle) - cleat spacing 500 mm Possible on request: - Special size - cycle control - frequency converter (485 €) - Corrugated edge (492 €) Hfsdsg Arxvjpfx Ag Usb

Condition: good (used), Year of construction: 2004, Fasson gluing machine - infeed width 2100mm - with press belt - Meler hot melt gluing machine with 4 heads year 2021 Hedpferwi N Hox Ag Uefb

Condition: good (used), Year of construction: 2002, functionality: fully functional, Unskilled operators can be trained in a day Automated Die-Cut work is fully stripped, stacked and counted for ease of operation Change from Micro Flute to Double Wall quickly and easily Hfedpfxjvrv Nmo Ag Ujb Cut to print +/- 1mm No need for separate stripping tools Waste board is automatically removed without employing additional labour Die-Form change takes less than 5 minutes Run Micro Flute up to Double Wall corrugated • Multiple outs FULLY stripped with NO tagging • Operator safe and friendly machine • Large sheet size 1.7m x 1.4m • Now faster, up to 1800 sheets per hour cycle speed with one operator. • Ideal for complicated parts fully stripped, no tags • Highest quality die-cutting and creasing • Cuts up to 9mm double wall corrugated • Runs warped board with ease • Job change and set up in minutes • Low tooling cost • One operator only • Precise cut to print registration • Compact design for space saving • User-friendly controls • Low maintenance • No make-ready necessary Cycles/hour 1800 Sheet size (max) 1700 x 1400mm Board max thickness, micro-flute up to 9mm D/W

Condition: new, empty load weight: 350 kg, maximum load weight: 950 kg, overall weight: 1,300 kg, tire size: 165R13C, Braked car trailer with leaf grate attachment and 100 km/h from trailer manufacturer STEMA type SyStema ST O2 13-30-15.1. A box trailer with attachment, ideal for private transportation or commercial use. Garden waste, firewood or bulky waste can be easily transported thanks to the corrugated grid attachment. Up to 3 motorcycles can also be transported thanks to the removable side walls. Hjdeq A Uk Dspfx Ag Usfb The standard equipment of the steel trailer includes a 100 km/h approval, galvanized lattice extension, front and rear flap, jockey wheel, eight lashing eyes, high-quality locks, removable galvalum galvanized drop sides and a V-drawbar. This trailer is also available in different versions, for example as a tarpaulin trailer or open. We also offer car trailer accessories such as side wall attachments, high tarpaulin, flat tarpaulin, drawbar box and rear supports, nets, ramp rail, stand rail, motorcycle rocker, motorcycle lashing straps, lashing straps.

Condition: new, machine/vehicle number: a3b1347da4aa7f31dceb875db, empty load weight: 2 kg, maximum load weight: 9 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle trailer Welded fine-grained steel construction 6 pairs of lashing eyes bolted to the outside of the floor/outer frame, 5 tons each Front gear support leg Folding rear support 2 wheel chocks with holder Steel underride guard Rear spray flaps across the entire width Quarter-shell mudguards Towing device central axle trailer Towbar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension BPW drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Floor Steel/ checker plate floor for high point load capacity Note: Slight floor corrugation possible due to welding distortion! Hodsi Ri Ilopfx Ag Uofb Platform length approx. 5,200 mm Rear sloping to approx. 900 mm Front wall / front corner stanchions 25 mm aluminum hollow profile, 320 mm high, Drop sides 25 mm aluminum hollow profile, 320 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions attached to the frame and with bracket for locking the drive-on ramps, drive-in width approx. 2,430 mm Drive-on ramps 2 steel ramps 2 300 mm long, 510 mm wide, can be moved sidewayswith grab handle on the ramps covered with wood With gas pressure jack for one-man operation Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray10-year warranty against rusting through Front wall aluminum Side wall anodized aluminium Drive-on ramps Hot-dip galvanized Attention: Archive pictures!

Condition: excellent (used), Model: EM6-50MT Year of manufacture: 2008 Hjdpfxsxqm Nkj Ag Uefb Serial number: 58060 Dimensions: 600 x 300 x 550 Corrugated cardboard cutting machine with cutting and winding tools, unwinder, work table, control cabinet, and operator terminal.

Year of construction: 2022, condition: new, Additional cost with corrugated edge : 374 € *Wavy edge is considered as optional equipment!* - mobile on steerable stop rollers - angle adjustable - incl. 3 collecting trays - task length : 600mm - ascending belt length : 1800 mm Hodpfx Aef U Evgeg Uofb - belt speed : 3m/min - cleat height : 30 mm - spring assisted height adjustment

Condition: used, Year of construction: 1979, functionality: fully functional, Floor-standing arm stapling machine for 2 to 3-ply corrugated cardboard. Bahmüller quality!! Unfortunately, machines like this are no longer available for purchase today... Hfsdpfx Ajxlix Rsg Usb

Year of construction: 1999, condition: used, Tank-& Umweltschutz Wozniack Specialist company according to the Water Resources Act Hfjdpfx Agecmcnvo Ueb Dear Sir or Madam, we offer a 10000 liter double-walled storage tank for the storage of diesel, with a new diesel dispenser incl data collection. Nominal capacity 10 cbm piece 1 used but overhauled, i.e. the tank is cleaned, refurbished, primed and painted Color equipment lacquer RAL ; however, you can also bring in your own color wishes at any time. Material steel in steel, material S235JRG2 Documents Manufacturer's certificate/test certificate according to DIN 6616 D/2 and type plate Piece 1 dipstick Piece 1 venting spigot Piece 1 filling nozzle Piece 1 new limit switch Piece 1 new leak detection sight with filled up leak liquid Piece 1 ladder piece 1 suction line Shape cylindrical storage tank with feet/console tank mass length approx . 5.370 mm plus column 500mm diameter approx. 1.600 mm Weight approx. 2.200 kg Storage above ground HDMeco 80 Diesel dispenser with tank data acquisition for 100 users Delivery rate max. 77 l/min PC software Windows, also Windows 7, USB interface incl. USB stick, 4 m delivery hose (optionally extendable), automatic dispensing gun with type approval, Electrical connection 230 V necessary accessories are included in the price of the equipment: HDMe-RS= 2 m return hose with connections (pressure relief of the pump) EH-115= 1 1/4" siphon angle valve with pressure relief, incl. connections Corrugated tube set: 1 1/4" consisting of: 240 mm corrugated tube with cathode protection, incl. gaskets and flange connection optional accessories: Transponder tag for contactless participant identification Nationwide instruction in the fuel terminal and the software Of course, you can also help to design your refueling system! All our systems are checked and inspected in our company by selected employees. extensively controlled and checked. We also offer an inexpensive delivery on request. The inspection of our plants is possible at any time. Further tank installations for above ground as well as underground storage are in all sizes and are available for sale on our premises. Top on offer . Liquid fertilizer - AHL tank plants in the size of 10,000-100,000 liters. Water tank firefighting water tank on offer . Price/ Shipping The price for the tank station is valid ex location Warstein , free loaded. Delivery can be offered at a reasonable price for an additional charge. Delivery time = immediately You will receive an invoice with VAT. In addition, we buy existing tank installations and can, as an approved specialist company according to the Water Resources Act (WHG) we can professionally empty, clean, dismantle and transport them away. With kind regards from Warstein Tank Environmental Protection Wozniack

Condition: new, empty load weight: 820 kg, maximum load weight: 1,880 kg, overall weight: 2,700 kg, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, tire size: 195/50r13c, *3-S-K* tipper with leaf grid from *trailer manufacturer* HAPERT model COBALT HM-2 2700kg 305x180x30. In our opinion, *cobalt tippers* from *Hapert* are extremely stable, very well equipped and also have a fair price. The *car trailer* as a *high loader* is designed for durability. High-quality equipment comes as standard with this three-way tipper. Hfsdpeqv Eidjfx Ag Uob The extensive standard equipment of the *tipper trailer* at a glance. A corrugated grid attachment, extremely stable steel frame hot-dip galvanized, electro-hydraulics with battery, removable illuminated control unit, double-walled anodized aluminium side walls, all walls are foldable and removable, easy-to-operate eccentric locks, low chassis with 195/50R13C tyres, lashing eyes with 1000kg load capacity, net hooks, steel plate on wooden floor, automatic support wheel and a reinforced V-drawbar. We offer useful accessories for *Hapert three-way tipping trailers*. Here you will find an inexpensive side wall attachment, tarpaulin with frame, emergency hand pump, ramps, rear supports, 100km/h approval, tool box, lashing straps and lock.

Condition: new, machine/vehicle number: 8df1ead53cc82aeb51e50a37d, empty load weight: 4 kg, maximum load weight: 13,880 kg, overall weight: 18 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis Turntable Disposal Fine-grained steel welded construction Container locking system: - 2 pairs of locking hooks embedded in the floor - Pneumatic actuation The container locking mechanism is a 2-point design, acting from the inside, and locking of roll-off containers with an inner web is not possible (for transporting roll-off containers with a sub-frame in accordance with DIN 30722) Note! At the start of the roller recess at the front, the container must be pushed on completely flat! Hsdoi Ri Nujpfx Ag Uefb Longitudinal guide rails can be moved sideways and removed, rails approx. 115 mm high Turntable with strong ball bearing slewing ring 8 pairs of lashing mushrooms at the top and sides of the outer frame, 5 tons each 7 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included) 2 wheel chocks with holder Aluminum side bumpers Steel underride guard Quarter-shell mudguards according to EG with anti-spray flaps according to EG Towing equipment Trailer turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, floor Steel floor Roller recess for container recessed in the floor at the frontfor roll-off containers from 5,000 - 7,000 mm in length Note: Slight floor undulation possible due to welding distortion! Drive-on ramps Lockable storage space for loading ramps underneath the loading area Operating instructions A special permit is required for axle loads of 10,000 kg. Approval must be applied for individually in each federal state; the legislator does not have to grant approval for 20 t GG. Customer risk. The specified total weight is technically possible; depending on the load, the total weight may not be achieved while complying with the permissible axle/support and fifth-wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Warning sign according to ECE - 70 Paint finish Frame DB 7350 nova gray 15-year warranty against rusting through Note: Bottom corrugation possible due to hot-dip galvanizing! Drawbar KTL black Attention: Archive pictures!

Condition: used, maximum load weight: 27,886 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2019, next inspection (TÜV): 06/2025, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, total width: 2,600 mm, Equipment: ABS, Schmitz Cargobull SKO 24 /L FP 45 Cool with Pharma Certificate Hfjdpfx Aget Aqv Es Ueb Qualification certificate for pharmaceutical acceptance * FP 45 SMART * S.KO Cool with EXECUTIVE Package S.CU V 2.0 * Body strength certified according to DIN EN 12642 Code XL ("TÜV load safety certificate") * Wheelbase 7600 mm * Schmitz axles with air suspension and disc brakes * Hubodometer * Jost supports * LED lighting system 24V * 2 reversing lights * 6-wheel 385/65R22.5 * Height V-DOST system type B1650 for 11x3 EURO pallets, with corrugations and rails without load bearing * S.CU V 2.0 with electric motor, with battery * SCHMITZ-WEISS paint finish For further information please do not hesitate to contact us

Year of construction: 2023, condition: new, - Delivery: 500 mm - Climbing belt: 1.800 mm - Feeding: 600 mm - cleat height: 30 mm - cleat spacing: 500 mm - Belt speed constant: 6m/min. Addition: - corrugated edge (cost: 375 €) - closed cleats (standard: from a useful width of 350 mm the cleats are split in the middle!) Hjdek Nlfxepfx Ag Usfb

Year of construction: 2000, condition: used, Tank-& Umweltschutz Wozniack Specialist company according to the Water Resources Act Dear Sir or Madam, we offer a 30,000 liter double-walled storage tank for the storage of diesel, with a new diesel dispenser incl data collection. Nominal capacity 30 cbm piece 1 used but overhauled, i.e. the tank is cleaned, refurbished, primed and painted Color equipment paint RAL ; but you can always bring your own color wishes. The plant is primed : Material steel in steel, material S235JRG2 Documents Manufacturer's certificate/test certificate according to DIN 6616 D/2 and type plate piece 1 dipstick Piece 1 venting spigot Piece 1 filling nozzle Piece 1 new limit switch Piece 1 new leak detection sight with filled up leak liquid Piece 1 ladder piece 1 suction line Shape cylindrical storage tank with feet/console tank mass length approx. 9.900 mm plus column 500mm Hfjdpfx Ajc Nk E Ssg Uob diameter approx. 2.000 mm Weight approx. 4.500 kg Storage above ground HDMeco 80 system new . Diesel dispenser with tank data acquisition for 100 users Delivery capacity max. 77 l/min PC software Windows, also Windows 7, USB interface incl. USB stick, 4 m dispensing hose (optionally extendable), automatic dispensing gun with type approval, Electrical connection 230 V necessary accessories are included in the price of the equipment: HDMe-RS= 2 m return hose with connections (pressure relief of the pump) EH-115= 1 1/4" siphon angle valve with pressure relief, incl. connections Corrugated tube set: 1 1/4" consisting of: 240 mm corrugated tube with cathode protection, incl. gaskets and flange connection optional accessories: Transponder tag for contactless participant identification. ===== Of course, you can also help design your tank system! All our installations are extensively checked and inspected in our company by selected employees. We also offer an inexpensive delivery on request. The inspection of our plants is possible at any time. Further tank plants for above ground as well as underground storage are available in all sizes and are for sale on our premises. Could we convince you of our offer? If you have any questions or requests, just give us a call, one of our experienced employees will be happy to advise you. Top in the offer . Liquid fertilizer - AHL tank systems in the size of 10,000-100,000 liters. Water tank fire water tank in the offer . Price/ Shipping The price for the gas station is valid ex location Warstein , free loaded. Delivery can be offered at a reasonable price for an additional charge. Delivery time = immediately You will receive an invoice with VAT. In addition, we buy existing tank systems and can, as an approved specialist company according to the Water Resources Act (WHG) we can professionally empty, clean, dismantle and transport them away. With kind regards from Warstein Tank and environmental protection Wozniack Enkerbruch 2 59581 Warstein

Condition: new, empty load weight: 630 kg, maximum load weight: 1,970 kg, overall weight: 2,600 kg, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 300 mm, tire size: 165r13, Product information "UNSINN WEB-DK3017-26-13-E 2600kg 306x175x85cm Mesh Extension Three-Way Tipper" Hsdpog Un Dzsfx Ag Uofb Three-way tipper with corrugated mesh extension from trailer manufacturer Unsinn, model WEB-DK3017-26-13-E. Made in Germany! The high-loader, three-way tipper, is equipped with electric hydraulics for tipping. The foldable and removable side walls make the car trailer easy to load from the side and rear with a forklift, wheel loader, or by hand. A welded and hot-dip galvanized steel frame makes the tipping trailer very stable. The tipper is equipped with a mesh extension, folding and removable side walls, a solid steel floor, electro-hydraulics, an automatic support wheel, lashing eyes, a welded, hot-dip galvanized frame, a rail shaft, and a very sturdy V-shaped drawbar. Tipper accessories such as a side wall extension, tarpaulin and frame, flat tarpaulin, net, box, loading rails, and supports are available for an additional charge. ----- You can also get: · Financing · Leasing (businesses only) · Consulting · Delivery throughout Germany (except islands) · Accessories · Rental trailers · Spare parts · Registration service for DH – HB – DEL · Service · Repairs · TÜV inspection for car trailers Ahrens Car Trailer Center, Moordeicher Landstraße 37, 28816 Stuhr near Bremen Opening hours: Monday - Friday 8:00 a.m. - 5:00 p.m.

Condition: used, maximum load weight: 27,886 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2019, next inspection (TÜV): 06/2025, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, total width: 2,600 mm, Equipment: ABS, Schmitz Cargobull SKO 24 /L FP 45 Cool with Pharma Certificate Hsdpfxst Dtb Ts Ag Ujfb Qualification certificate for pharmaceutical acceptance * FP 45 SMART * S.KO Cool with EXECUTIVE Package S.CU V 2.0 * Body strength certified according to DIN EN 12642 Code XL ("TÜV load safety certificate") * Wheelbase 7600 mm * Schmitz axles with air suspension and disc brakes * Hubodometer * Jost supports * LED lighting system 24V * 2 reversing lights * 6-wheel 385/65R22.5 * Height V-DOST system type B1650 for 11x3 EURO pallets, with corrugations and rails without load bearing * S.CU V 2.0 with electric motor, with battery * SCHMITZ-WEISS paint finish For further information please do not hesitate to contact us

Condition: new, Year of construction: 2024, functionality: fully functional, The conveyor belt of the company MASS is for sale, NDZ 2 with corrugated edge and takt control You can also have the conveyor belt without corrugated edge and takt control then the conveyor belt costs ONLY 2359€ NDZ 2 Feed: 600 mm Pitch: 1300 mm Discharge belt : 500 mm Mobile With corrugated edge Hjdpfsttmubjx Ag Usfb With take control With hopper

Year of construction: 2004, condition: used, Tank-& Umweltschutz Wozniack Specialist company according to the Water Resources Act Dear Sir or Madam, we offer a 20,000 liter double-walled storage tank for the storage of diesel, with a new diesel dispenser incl data collection. Nominal capacity 20 cb piece 1 used but overhauled, that means the tank is cleaned, refurbished, primed and painted Color equipment paint RAL ; but you can always bring your own color wishes. The plant is primed and we still painted . Material steel in steel, material S235JRG2 Documents Manufacturer certificate/test certificate according to DIN 6616 D/2 and type plate Piece 1 dipstick Piece 1 venting spigot Piece 1 filling nozzle Piece 1 new limit switch Piece 1 new leak detection sight with filled up leak liquid Piece 1 ladder piece 1 suction line Shape cylindrical storage tank with feet/console tank mass length approx . 6.870 mm plus column 500mm diameter approx. 2.000 mm Weight approx. 4.500 kg Storage above ground HDMeco 80 system new . Diesel dispenser with tank data acquisition for 100 users Delivery capacity max. 77 l/min PC software Windows, also Windows 7, USB interface incl. USB stick, 4 m delivery hose (optionally extendable), Automatic nozzle with type approval, Electrical connection 230 V necessary accessories included in the price of the equipment : Hedpjcnkftefx Ag Uofb HDMe-RS= 2 m return hose with connections (pressure relief of the pump) EH-115= 1 1/4" siphon angle valve with pressure relief, incl. connections Corrugated tube set: 1 1/4" consisting of: 240 mm corrugated tube with cathode protection, incl. gaskets and flange connection optional accessories: Transponder tag for contactless participant identification. Of course, you can also co-design your tank system! All our systems are checked and inspected in our company by selected employees. extensively controlled and checked. We also offer an inexpensive delivery on request. The inspection of our plants is possible at any time. Further tank facilities for above ground as well as underground storage are available in all sizes and are for sale on our premises. and are available for sale on our premises. All our tank facilities can also be offered without diesel pump. Top on offer . Liquid fertilizer - AHL tank plants in the size of 10,000-100,000 liters. Water tank fire water tank in the offer . Price/ Shipping The price for the gas station is valid ex location Warstein , free loaded. Delivery can be offered at a reasonable price for an additional charge. Delivery time = immediately You will receive an invoice with VAT. In addition, we buy existing tank systems and can, as an approved specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle and transport them away. With kind regards from Warstein Tank and environmental protection Wozniack Enkerbruch 2 59581 Warstein

Condition: new, functionality: fully functional, empty load weight: 700 kg, maximum load weight: 2,000 kg, overall weight: 2,700 kg, loading space length: 5,050 mm, loading space width: 2,000 mm, loading space height: 300 mm, Product information "HAPERT AZURE H2 2700kg 505x200x90cm Low Mesh Extension 13" High Loader" Extremely sturdy high loader from trailer manufacturer HAPERT, model AZURE H-2 2700kg 505x200. Thanks to its foldable aluminum side walls, the flatbed can be used very universally. Pallets can be easily loaded from the side or rear. All flaps and corner stanchions are removable, quickly transforming the flatbed into a clean platform. The standard equipment of the Hapert flatbed high loader is very extensive, including sturdy aluminum side walls, a low 13" chassis, center stanchions, eccentric locks, lashing eyes, net hooks on the hinged bottom sections, an automatic support wheel, an extremely sturdy welded and hot-dip galvanized steel frame, and a reinforced and bolted V-drawbar. Technical specifications can be found below. Hfsdpfswiwvhsx Ag Uob We also offer a wide range of trailer accessories for Hapert car trailers. These include higher side walls, corrugated mesh extensions, side wall extensions, a gross vehicle weight of up to 3500 kg, parabolic suspension, a raised front frame, loading ramps, rear supports, 100 km/h approval, a tool box, lashing straps, and a trailer lock, all available for an additional charge.

Condition: new, functionality: fully functional, empty load weight: 770 kg, maximum load weight: 2,730 kg, overall weight: 3,500 kg, loading space length: 5,050 mm, loading space width: 2,000 mm, loading space height: 300 mm, Product information "HAPERT AZURE H2 3.5t 5x2m lattice extension with 13-inch parabolic suspension" Extremely sturdy high-loader from trailer manufacturer HAPERT, model AZURE H-2 3500kg 505x200. Its foldable aluminum side walls allow for versatile use. Pallets can be easily loaded from the side or rear. All flaps and corner stanchions are removable, quickly transforming the loader into a platform. The standard equipment of the Hapert flatbed trailers is very comprehensive, including sturdy aluminum side walls, a pendulum and removable corrugated mesh extension, a low 13-inch chassis, parabolic suspension with shock absorbers and a 100 km/h rating, center stanchions, eccentric locks, tie-down eyes, net hooks on the hinge bases, an automatic support wheel, an extremely sturdy welded and hot-dip galvanized steel frame, and a reinforced and bolted V-drawbar. Hedpfxjwiwggo Ag Ujfb Technical specifications can be found below. We also offer a wide range of trailer accessories for Hapert car trailers. Higher side walls, corrugated mesh extensions, side wall extensions, a raised frame for the front, loading ramps, rear supports, 100 km/h approval, a tool box, tie-down straps, and a trailer lock are available for an additional charge. ... ----- You can also get: · Financing · Leasing (businesses only) · Consulting · Delivery throughout Germany (except islands) · Accessories · Rental trailers · Spare parts · Registration service for DH – HB – DEL · Service · Repairs · TÜV inspection for car trailers Ahrens Car Trailer Center, Moordeicher Landstraße 37, 28816 Stuhr near Bremen Opening hours: Monday - Friday 8:00 a.m. - 5:00 p.m.

Condition: new, functionality: fully functional, empty load weight: 720 kg, maximum load weight: 1,880 kg, overall weight: 2,600 kg, loading space length: 5,020 mm, loading space width: 2,030 mm, loading space height: 300 mm, Product information "Hulco MEDAX-2 2600kg 502x203x90cm Corrugated Mesh Extension" Tandem high-loader from the manufacturer HULCO, model MEDAX-2 2600.502x203. As standard, the Hulco flatbed high-loader with brakes features all folding and removable aluminum side walls, a very stable, swing-and-removable corrugated mesh extension, sturdy eccentric locks, internal lashing eyes, external lashing hooks, profile channels for attaching accessories or load securing, a very stable welded lattice steel frame, extendable tailgate supports, a support wheel, and a V-drawbar. We also offer accessories for Hulco car trailers, such as high tarpaulins, net hooks, loading ramp kits with holders, rear support kits, accessory boxes, straps, and anti-theft devices. Hjdpowhy Rrofx Ag Usfb The Hulco flatbed high-loader with brakes features all folding and removable aluminum side walls, a very stable, swing-and-removable corrugated mesh extension, sturdy eccentric locks, internal lashing eyes, external lashing hooks, profile channels for attaching accessories or load securing, a very stable welded lattice steel frame, extendable tailgate supports, a support wheel, and a V-drawbar. We also offer accessories for Hulco car trailers, such as high tarpaulins, net hooks, loading ramp kits with holders, rear support kits, an accessory box, straps, and an anti-theft device. ... ----- You can also get: · Financing · Leasing (businesses only) · Consulting · Delivery throughout Germany (except islands) · Accessories · Rental trailers · Spare parts · Registration service for DH – HB – DEL · Service · Repairs · TÜV inspection for car trailers Ahrens Car Trailer Center, Moordeicher Landstraße 37, 28816 Stuhr near Bremen Opening hours: Monday - Friday 8:00 a.m. - 5:00 p.m.

Condition: new, empty load weight: 600 kg, maximum load weight: 1,400 kg, overall weight: 2,000 kg, loading space length: 3,000 mm, loading space width: 1,550 mm, loading space height: 300 mm, tire size: 155r13c, Reverse tipper with leaf grate attachment from the manufacturer Cheval Liberte, also known as Debon. The high loader as a rear tipper can be easily loaded from the side and rear with a forklift or by hand thanks to the folding and removable side walls. The load can be tipped from this tipper trailer using an electro-hydraulic system. The car trailer is equipped with foldable and removable aluminium side walls, 55 cm swinging and removable corrugated grid attachment, steel floor, electric hydraulics with battery, automatic support wheel, lashing eyes, welded hot-dip galvanized frame and a V-drawbar. Trailer accessories such as a side wall attachment, tarpaulin and frame, flat tarpaulin, net, charger and supports are also available at an extra charge. --- You can also find all our low-cost offers on our homepage Hodpfxofr Uw Ns Ag Uefb Germany-wide delivery (except islands) possible! for the prices. --- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Pick-up times: Monday - Friday - o'clock Saturday is not possible!