Die-cutting machine

Sanwa TRP-1150-SCB

Condition: used, Year of construction: 2003, Offset 6 color with coating Kedpfx Aasuhtg Aj Eonf Roland 706/3B+LTTLV (UV) Year: 2003 Number of impressions (mio): 500 Machine control - RCI - IntelliTrax II density control Feeder - Non-Stop feeder - Logistic system in feeder Printing units - Number of printing unit(s): 6 - Straight machine - APL Full Automatic Plate Change - Automatic blanket washing device - Cooling system: Technotrans - Ink temperature control Coating - Number of coating unit(s): 2 - Number of transfer unit(s): 2 - Tresu chambered ductor blade system - Number of Anilox roller(s): 2 Drying - IR dryer between coating unit 1 and 2 - IR + hot-air dryer in delivery - UV dryer in delivery: Eltosch Delivery - Non-Stop delivery - Powder spray: Grafix Cantronic 3000 - Logistic system in delivery Elevation - Machine raised by (cm): 50 Accessories - Air cabinet: Becker - Cabinets air cooled - Compressed air compressor, excluded

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system Kedpfowypp Iex Aa Esnf - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Automatic Sheet Feeder A-4: Mabeg Suction Head, Double Sheet Control Laminating Unit EK-HL-4: Waterbased & Thermal Automatic Sheet Seperator UTM-4 Seperating Unit: Quadruple Round Knife, Perforating Device, Hot Knife Powder Spray Removal Device GK-4 Automatic Stacker S-3 Ksdpforp D Nlsx Aa Eenf Airjet-Dryer Max. Sheet Size X : 1040 mm Max. Sheet Size Y : 1420 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 70-100 m/min

Condition: new, CATALOGUE NUMBER M0261 TECHNICAL DATA Knodpfxedpcfls Aa Eof number of spindles 21 distance between first and last drill 640mm distance between the centers of individual spindles 32mm max size of the workpiece 50 x 915 x 3000mm max drilling depth 65mm number of pneumatic clamps 2 height of the drill's working table 860mm max height of clamps above the table 70mm working pressure 6-7bar air consumption 10l/cycle engine power 1.5kW noise level 76.1dB speed 2800rpm dimensions length/width/height 1030/1030/1285mm weight 275kg PRODUCT FEATURES Main features of the machine: - Single-head drill for drilling in the range of 0 - 90 ° - Pneumatically adjustable head angle - Cast iron fences - Spindles adapted to quick connectors - Patented pneumatic material clamps - Cast iron work table - Quick and precise adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers 1.5 m long (right and left) with two stoppers - 5 quick connectors - Wooden box securing the machine during transport. ADVANTAGES - vertical/horizontal/angle drilling - multi-spindle - new machine - CE certificate - solid - professional Net price: PLN 16,400 Net price: EUR 3,950 Net price calculated according to the exchange rate of PLN 4.15/EUR (with larger exchange rate fluctuations, the price may change) - we send machines to every corner of the country - possibility of leaving another machine in the settlement. The prices given are net prices. The net price given for international transactions, customers from the EU with an EU tax identification number. Before placing an order for a new product, please confirm the availability and current price.

Condition: used, Year of construction: 2007, The Horizon StitchLiner 5500, manufactured by Horizon in 2007, is a machine with a format of 350 x 500 mm currently in production and located in Germany. This machine includes two VAC-100a and VAC-100m collating towers, an ST-40 stacker, an ACF-30 accumulator and folder, an SPF-30 saddle stitcher, an HTS-30 three-knife trimmer, and a TB-30 transport belt. Key features include 20 stations, a U-shaped layout for efficient space utilization and easy monitoring, inline production from collating to the finished product, and variable data processing for personalized printing. It offers fully automatic format adjustment for quick job changes and a touchscreen for user-friendly operation, even for less experienced operators. The specifications include handling sheet sizes from a maximum of 500 x 350 mm to a minimum of 148 x 120 mm, with a paper weight range of 40-350 gsm. It can process thicknesses from 8 to 200 pages, with a maximum spine thickness of 5 mm, and achieves a production speed of up to 5,500 booklets per hour. Technical details include a trimming size (untrimmed) from a maximum of 350 x 250 mm to a minimum of 140 x 103 mm, and a trimming size (trimmed) from a maximum of 312 x 230 mm to a minimum of 120 x 95 mm. The machine requires a power supply of 400V/50Hz. The delivery terms are FCA. Format: 350 x 500 mm Equipment: This StitchLiner 5500 includes the following components 2x VAC-100a and VAC-100m Collating Towers ST-40 Stacker ACF-30 Accumulator and Folder SPF-30 Saddle Stitcher Knodpfevfx Ncex Aa Ejf HTS-30 Three-Knife Trimmer TB-30 Transport Belt Key Features:- 20 stations- U-shaped layout: Efficient space utilization and easy monitoring- Inline production from collating to finished product- Variable data processing: Handles personalized p printing- Fully automatic format adjustment for quick job changes- Touchscreen for user-friendly operation, even for less experienced operators Specifications:- Sheet sizes: Max. 500 x 350 mm, Min. 148 x 120 mm- Paper weight: 40-350 gsm- Processing thickness: 8-200 pages (max. 5 mm spine thickness)- Production speed: Up to 5,500 booklets/ Technical Details:- Trimming (untrimmed): Max. 350 x 250 mm, Min. 140 x 103 mm- Trimming (trimmed): Max. 312 x 230 mm, Min. 120 x 95 mm- Power supply: 400V / 50Hz- Space requirement: Min. 5,709 x

Condition: ready for operation (used), Fully Automatic Flatbed Die-Cutter, Kjdpfewly D Hex Aa Ejnf Non-Stop Feeder, Automatic Vacuum Plate, Double Sheet Cleaning Station, Turn Die Cutting Frame, (Batch Delivery) Non-Stop Delivery With Belt, Cutting Force 300 TON, Up to 4.500 Speed/H, Working With Corrugated Cardboard Of Thickness Max. 9mm, Min. 0,9mm, Format: Max. 1055x1575mm, Min. 400x600mm, Standard Accessories Bobst SPO 1575 EG 1980, fully rebuilted 2015, chain changed 2024.

Condition: excellent (used), Year of construction: 1987, Universal non stop Feeder In line pile preparation 4 fron lays Kodpfx Aasvyn Ttj Eenf Pull guide OS 16 INDEPENDENT HEATING ZONES Honeycomb Leteral guiding device for foil Motorized foil tension, air cooling Size 102x72 cm Min size 40x35 cm Speed with hot stamping 5000 per hour max Speed for die cutting 7500 per hour max

Condition: excellent (used), Grinding length 1000 mm grinding diameter fi 350 mm Knjdpfx Aok Abxxsa Esf In very good condition.

Condition: good (used), Year of construction: 2000, operating hours: 46,516 h, functionality: fully functional, BILLHOFER AUTOMATIC LAMINATED MACHINE • TYPE : EK 102-50 • SIZE : 102 x 114 • YEAR : 2000 • WORK : 46.516 Hours DETAILS: Automatic Feeder A-20-P (Double Sheet Control) Seperator Laminated Delivery Table Electrical Cabinets Knsdovm Ab Espfx Aa Eof Very Good Condition Available Immediately

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 100810261, type of cooling: water, SHINOHARA 75 VP AMBIDEXTROUS (1+4 COLORS) CIP3. AUTOMATIC CHINCH PASS AUTOMATIC WASHING. UV LAMPS. Knedpstvmq Nofx Aa Ejf WATER COOLER WITH AUTOMATIC ALCOHOL MIXING PH. AUTOMATIC METERS. WASHING ROLLER WINDER DISTRIBUTED WITH THE MACHINE. FLOOR FAN. 2 CALIBRATION DEVICES 20 SPARE CYLINDERS. PRINTING 4600000