Used Knuckle-Joint Press for sale (13,049)

Condition: used, Year of construction: 1985, functionality: limited functionality, pressing force: 400 t, stroke length: 130 mm, table width: 500 mm, table length: 500 mm, overall weight: 8,500 kg, For sale knuckle-joint press type KB8336 made Stanko, effort 400 ton, year of manufacture 1985, table dimensions 500mm*500mm, stroke 130mm, total weight 8500kg. Price is 17500 Euro CIF. Todpfszugawsx Aa Ijc

Condition: used, There are three May MKN1-100/6 toggle-type presses available, ram stroke: 60mm, pressing force: 100t, ram strokes: 60/min, flywheel speed: 620rpm, distance between bolster plate and ram, stroke at bottom/adjustment at top: 265mm, ram adjustment: 30mm, table surface: 640x404mm, ram surface diameter: 300mm, drive power: 5.5kW, operating voltage: 3~/380V, frequency: 50Hz, control voltage: 220V, lighting voltage: 220V, rated current: 17A, supply fuse: 25A, overhaul: 1984, an on-site inspection is possible. Tedpfjz D Hzdjx Aa Ijc

Year of construction: 1993, condition: ready for operation (used), Pressing force: 2000kN, max. installation height: 550mm, total power requirement: 72kW, operating pressure: 210bar. Including feed unit. On-site inspection is possible. Tedjv Tnytspfx Aa Ijc

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Todpfjywztajx Aa Isc Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Standard configuration original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Including tools

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Standard configuration PRESS :original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Full line ready to produce including : *New AMIDEC (France) 2 axis transfer arm, equipped with: 2 grippers for the handling of billets1 nozzle for cleaning and lubrication of forging tools *New Induction s.r.l. (Italy) heater 200kW designed to heat carbon steel billets diameter 24 to 75,5mm, length 22,1 to 33,1mm. 700 to 800°CScope of supply of the heating systemA/ M.F. Static converter model IHFT 200 K4B/ Frame for the M.F. capacitors and inductorsC/ automatic loading system for disc-shaped billets with reversible box- Tilting box- Storage conveyor- Vibrating bowl- Command and control cabinet- Steel support - Soundproof cabineD/ 1 system for the introduction of the billets to the inductor and 1 system for exit of the billets.E/ Inclined inductor length 1200mm with inox pipe F/ 1 automatic inductors exchange double version (for 2 inductors)G/ 1 optical pyrometer H/ 1 integrated dry supply transformerI/ PLC Siemens S1500 installed on the converterJ/ Cooling system  Tsdpfx Asywztgsa Iec Tools

Year of construction: 1995, condition: used, Rated force: 6000kN, rated force travel: 1.7mm, rated energy: 10.2kJ, stroke: 100mm, stroke rate: 45/min, installation height: 360mm, tool holder adjustment: 50mm, clear width of press frame: 580mm, table width: 550mm, table depth: 620mm, tool holder width: 550mm, tool holder depth: 430mm, motor power: 15kW, length: 2435mm, width: 1500mm, height: 2750mm, weight: 13.5t, an on-site inspection is possible. Tjdpfjzybugjx Aa Ijc

Year of construction: 2004, condition: excellent (used), machine/vehicle number: 2151, KNUCKLE JOINT PRESS "GRABENER" TYPE GK 360 Tjdpfxed Hpcyo Aa Iec Manufacturing origin CE - France Voltage 380V/50Hz/3ph Netweight 8800 kg Custom position 8462.1020 Dimensions 230x170x260 cm TECHNICAL DATA Power in tons 360 T. Table length 440 mm Table width 525 mm Ram stroke 60 mm Number of strokes 60 / Min. Motor power 11 kW errors and omissions excepted-data given without obligation

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Tsdpfx Aaez Dtcbs Ioc Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Automatic book feed. Automatic format detection. 380V power supply + compressed air.

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Tedpfx Aeztpbnea Iec Book press with groove burner. Manufactured by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air.

Condition: refurbished (used), DKV III continuous press with braking unit Completely overhauled Optional with original hydraulic motors or with servo motors Options: - Chain threading - Co-rotating cut-off saw Function: For pressing the dovetail joint without stopping (in a continuous process). The upper and lower plate chains generate the feed force. Downstream braking plates transmit the required longitudinal pressing force to the wood through friction. Advantages: - High performance despite a relatively slow feed rate - Absolutely no vertical displacement of the dovetail joints Technology: Heavy-duty plate chain 2", pneumatically adjustable Braking elements are floating Press force measurement via contact manometer Height adjustment electrically Maximum press force adjustable and dependent on feed rate and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed rate adjustable 10-70 m/min Drive power Adjustment of infeed unit 1 kW Adjustment of brake 1 kW Hydraulic motors 45 kW Technical data: Tsdpfev T Aqyox Aa Ijc Wood width 90 - 180 mm Wood thickness 20 - 80 mm Ratio thickness - width 6 : 10 Wood cross-section with 15/16.5 mm tenon max. 90 cm²

Year of construction: 2002, condition: excellent (used), functionality: fully functional, machine/vehicle number: 109 262, For sale is a corner connection press complete with automatic adhesive injection unit from Schüco, Art. No.: EVM 280106, including an extensive range of accessories for various profile series, manual, and CE certification. The machine has seen very little use due to lack of space and is therefore in like-new condition. Tedjyc Sinepfx Aa Ioc

Condition: refurbished (used), pressing force: 10 t, working height: 805 mm, total length: 1,700 mm, year of last overhaul: 2026, Hydraulic finger jointing cycle press (Keilzinkpresse), cycle press for finger joint connections with a pressing force of 10 t. Wood width 80 – 300 mm, wood thickness 18 – 100 mm. OPTIONS: With 300 l hydraulic unit and 5.5 kW motor, manufacturer GOD; with electrical installation. Tjdot Sc Swspfx Aa Iec

Condition: repair required (used), Year of construction: 1993, machine/vehicle number: 624/9, pressing force: 10 t, working height: 805 mm, total length: 1,900 mm, Finger joint press Cycle press for finger joint connections Finger jointing press Pressing force 10 t Wood width 80 - 300 mm Wood thickness 18 - 100 mm Todpfst Sc T Ijx Aa Ijc OPTIONAL with hydraulic unit

Condition: new, For processing all common aluminum window profile systems such as Schüco, Hueck, Heroal, Reynolds, etc. Universally applicable due to the double-adjustable punching tools. For corner angles with a groove dimension of 25 - 60 mm and profile chamber offset of 0 – 40 mm. Infinitely adjustable buttons, punching blades, and stop inserts in height. Buttons and punching tools are marked with scales. Tsdpfshmfyhsx Aa Iec Retractable stop for easy insertion of the profiles, with automatic adjustment when moving towards the profile. Hydraulic stop locking mechanism. Pneumatic pressing process via a lever system, ensuring a synchronous punching process. 2 pneumatic clamping cylinders for tensioning the profiles. 2 eccentric disks for positioning the frames. 2 pivoting profile support arms. Operation via 2 foot valves. Includes standard tools.

Condition: excellent (used), total length: 3,000 mm, total width: 1,500 mm, Panel press in very good working condition + Grecon finger jointing Tedpfx Aajt Uduxo Ijc

Condition: used, Year of construction: 2000, machine/vehicle number: 124, Falzeinbrenn- und Abpressmaschine - Book press and joint-setting machine Zechini CIMATICYear 2000 - Serial-No. 124/00 Buch Format max. Buchhöhe 48cm x Buchbreite 35cm x Buchblockstärke 9cm Book Size max. height 48cm x width 35cm x thickness 9cm Leistung max 150 in St./h / Output 150 pcs/h Pressluftanschluss 6 bar / Air pressure supply 6 bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Todpfeh Ayanox Aa Isc Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2025, PRESSING AND JOINT FORMING MACHINE MODEL; MAGRAF PK-50x40 PLUS Tsdpfognlvnsx Aa Ijc YEAR; 2025 Hydraulic pressure; 4000kg

Condition: used, Year of construction: 1981, machine/vehicle number: 9, Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 20 Case Press and Joint-Setting machine Schmedt PräForm HHS 20 Baujahr / Year 02/1981 - Serial-Nr. 09 Buchhöhe / Book height: 100 - 520mm Tsdpformul Djx Aa Iec Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Pressluftanschluss / Air supply: 6bar Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 300 mm, table length: 1,500 mm, throat depth: 1,100 mm, TECHNICAL DETAILS Pressing force: 100 t Max. stroke: 380 mm Stroke length: 100 mm Overhang: 1,100 mm Vertical adjustment: 750 mm Table length: 1,500 mm Tjdpfszxcldex Aa Ijc Table width: 300 mm Width between uprights: 1,100 mm Clearance under the hydraulic cylinder: approx. 1,100 mm MACHINE DETAILS Press type: Single-acting Control system: Conventional Motor power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 1,450 x 800 x 2,200 mm Net weight: 970 kg Shipping packages: 1 unit EQUIPMENT Movable press cylinder Documentation CE certificate CE marking

Condition: used, Die PräForm ist eine Maschine zum Einpressen von Büchern nach dem Einhängen und dem gleichzeitigem Einbrennen des Falzes. The PräForm is a machine to press books after casing-in, setting the joint at the same time and processes single books just as well as series of books.  Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 2100 Case Press and Joint-Setting machine Schmedt PräForm HHS 2100 Baujahr / Year Serial-Nr. 77 Buchhöhe / Book height: 100 - 520mm Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Todpsxgi Hqefx Aa Iec Pressluftanschluss / Air supply: 6bar Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 1 Guides: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Guides: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Summary Tjdpozi Hchofx Aa Iec The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Condition: good (used), Year of construction: 2016, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 170 mm, operating speed: 10 mm/s, reverse speed: 170 mm/s, table width: 90 mm, table length: 1,270 mm, table height: 850 mm, throat depth: 350 mm, clearance between the columns: 1,050 mm, oil tank capacity: 80 l, total length: 2,150 mm, total width: 1,650 mm, total height: 2,300 mm, overall weight: 3,250 kg, year of last overhaul: 2025, Equipment: CE marking, safety light barrier, 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake – 6 Axis – Delem DA-66T Control Used 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Delem DA-66T graphic control, Y1, Y2, X, R, Z1 and Z2 axes, tooling, laser guards. Manufacturer: Ermaksan Model: Speed-Bend(SB) Pro 1270 x 40 Axes: 6 Year: 2016 Capacity: 1270mm x 40T Control: Delem DA66T Description 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake, a compact, high-quality 6-axis CNC hydraulic press brake ideal for precision sheet metal bending, fabrication workshops, engineering companies and production environments. This Ermaksan Speed-Bend Pro 1270 x 40 offers a bending length of 1270 mm and a bending power of 40 tonnes. It is fitted with a Delem DA-66T graphic CNC control, providing a clear touch-screen interface for accurate programming, bend sequence calculation, tooling setup and repeatable production bending. The machine is in good condition. It comes complete with Euro-style top and bottom press brake tooling, laser guards, foot pedal, quick-release top tool clamps and rear safety doors, making it a well-equipped used press brake ready for immediate inspection and production use. This is a superb opportunity to purchase a late-model, compact Ermaksan CNC press brake with a desirable 6-axis specification, ideal for companies looking for a reliable used hydraulic press brake in Ireland, the UK or Europe. Key Features Manufacturer: Ermaksan Model: Speed-Bend Pro 1270 x 40 / SB PRO 1270-40 Year: 2016 Type: CNC hydraulic press brake Bending length: 1270 mm Bending power: 40 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Delem DA-66T Graphic CNC Control Condition: Good condition Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications – SB PRO 1270-40Model: SB PRO 1270-40 Bending length: 1270 mm Bending power: 40 tonnes Distance between columns: 1050 mm Y-axis rapid speed: 140 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 170 mm/s X-axis travel: 500 mm X-axis speed: 500 mm/s R-axis travel: 250 mm R-axis speed: 350 mm/s Z1 / Z2-axis travel speed: 1000 mm/s Backgauge finger blocks: 2 Oil capacity: 80 litres Motor power: 5.5 kW Stroke: 170 mm Daylight: 387 mm Throat depth: 350 mm Table height: 850 mm Table width: 90 mm Machine Dimensions: 2150 x 1650 x 2300mm Machine weight: 3250 kg Standard / Included Equipment This used Ermaksan Speed-Bend Pro press brake is supplied with: 6 CNC axes: Y1, Y2, X, R, Z1 and Z2 Delem DA-66T graphic CNC control Euro-style top press brake tools Euro-style bottom press brake tools Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Backgauge finger blocks Todpfx Aaozdak Ao Ijc Sheet support arms Notes: *Specifications are given in good faith but not guaranteed*

Condition: new, MECHANICAL SCREW PRESS FOR STACKING U-JOINTS PRK-2 Designed for staking u-joints as well as assembly and dissasembly of driveshafts during repair and remanufacturing process Press can be used for the assembly and replacement of cardan joints in the repair and production of cardan shafts, as well as for other processes in which the pressing operation is used. This press is designed for use in a repair shop and does not require any special knowledge for operation and maintenance. Manual feed ensures precision and quality of stacking process. The pressing mechanism is based on a ball screw, which has a high efficiency and a long service life. Technological tooling for replacing stacked u-joints: Tjdpfxepbwdls Aa Iec • Centering housing for the punches. • Set of 8 bits for punching crosses with diameters from 20 to 31 mm for drive shafts. • Set of 4 bits for punching crosses with diameters from 15 to 19 mm for steering shafts. SPECIFICATIONS Working area (L x B x H) 322х312х350 mm Maximum compression force 5500 kg Maximum force on rupture 2000 kg Dimensions (length x width x height) 402х488х1478 mm Weight 160 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1300x800x1350 mm Tjdpfov A E Nkjx Aa Isc Weight 370 kg Total power requirement 0 kw

Condition: used, Year of construction: 2024, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Lotus Press LTS 138’ textile press Item for sale: 1x Lotus Press LTS 138 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). Tjdpfxezy U Uyo Aa Ioc The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! For further information, please feel free to contact us directly.