Used Magazine Nailer for sale (2,192)

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes Todoz En Axjpfx Aa Isc End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: used, Year of construction: 2016, functionality: fully functional, total height: 3,900 mm, total length: 15,500 mm, The machine underwent a major overhaul in 2026 for approximately 20,000 euros. The system features large carton magazines with a stacking height of 2200 mm. The machine has a large waste management system. The Nextmode has 5 magazines arranged in a row and an SbS function, allowing up to two widths of continuous corrugated board to be placed side by side in each magazine. The system has 8 longitudinal tools for highly flexible production of cardboard packaging. In addition to the standard creasing tools, the system also has a fine perforation technology in all tool groups. The system is currently still in operation and can be inspected upon request. It can handle cardboard grades up to 2.9 BC flute (thickness approx. 7 mm). The machine will be available from approximately November 2026. Tsdjz A Edzepfx Aa Isc A price quote will be provided upon request.

Condition: new, Compressed air strip nailer 6512/130 SQ for nails up to 130 mm long Applications: Carpentry, roofing, packaging, interior finishing, prefabricated house construction, timber formwork, battens, crate and pallet construction, fence construction, load securing, etc. - Single release - For paper-loaded safety strip nails - Eurocode 5 nails in accordance with DIN EN 14592 - User-friendly driving depth adjustment - Robust and powerful - Optimally silenced and balanced Technical data: - Release type Single release - Air consumption per driving operation 5.40 liters - Nail lengths from 90 to 130 mm - Nail diameter 3.4 - 4.2 mm - Nail series 34° safety strip nails - Magazine capacity 75 nails - Weight 6.60 kg - Length x width x height 470 x 150 x 460 mm Tjdovcl Sljpfx Aa Ioc The nailer is new and unused. Only traces of storage may be present, as the device was hanging in our showroom. You will receive an invoice with VAT shown. Payment: Prepayment by bank transfer - NO PAYPAL! If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2006, number of axes: 3, working width: 1,250 mm, working length: 3,100 mm, TECHNICAL DETAILS Working area, X-axis: 3,100 mm Todpfx Aasz En Afs Ijc Working area, Y-axis: 1,250 mm Max. panel thickness: 85 mm Number of controlled axes: 3 Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-direction: 2 Horizontal drilling spindles, Y-direction: 2 Total number of vertical and horizontal drilling spindles: 11 Milling unit Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Motor power: 9 kW Automatic tool changer: yes Grooving unit Number of grooving units: 1 Position of grooving unit: top Swivel positions: 0° / 90° Number of tool magazines: 1 Tool positions: 8 Position of tool magazine: machine side Number of work tables: 1 Table width: 3,100 mm Table length: 1,250 mm Table material: phenolic resin MACHINE DETAILS Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h Control system: PC Control Programming software: WoodWOP 5.0 EQUIPMENT Flat table design Nesting work table Vacuum pump Automatic tool changer Tool magazine positioned on the side Safety light barriers CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6279

Condition: good (used), Year of construction: 1998, functionality: fully functional, Bandsaw automat Behringer HBP 303A / PCM Tedpoz E Np Hsfx Aa Iec Year of manufacture: 1998 Including magazine for up to 9 tons Magazine dimensions: (L x W x H) 480 x 400 cm Capacity for 9 bars. Length approx. 8 m The bandsaw automat is fully functional and currently still in use in production. An inspection while the machine is running can be arranged. Available from December 2026! Cutting range: 260 mm Saw motor drive power: 4 kW Total drive power: 15 kW Cutting speed: 10 - 120 m/min. Machine dimensions (L x W x H): 320 x 260 x 220 cm Weight: approx. 2500 kg

Condition: used, Year of construction: 2006, number of axes: 3, working width: 2,040 mm, working length: 3,680 mm, TECHNICAL DETAILS MACHINING PROCESS Machining process: Drilling and milling WORKING AREA X-axis working area: 3,680 mm Y-axis working area: 2,040 mm Number of working areas: 2 Number of controlled axes: 3 WORKTABLE Table type: Flat table / Nesting table Number of tables: 1 Table width: 3,680 mm Table length: 2,040 mm Table material: Aluminum DRILLING UNIT Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-axis: 2 Horizontal drilling spindles, Y-axis: 2 Total number of drilling spindles: 11 MILLING SPINDLE Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Motor power: 13 kW Speed: 24,000 rpm Automatic tool changer: yes TOOL MAGAZINE Number of tool magazines: 1 Tool slots: 12 Tool magazine: positioned at the head VACUUM SYSTEM Number of vacuum pumps: 1 Suction capacity: 250 m³/h CONTROL AND SOFTWARE Control: PC-based control Programming software: Xylog Plus MACHINE DETAILS MAIN DRIVE Power of main electric spindle: 13 kW SAFETY CE marking: yes Protective guard: permanently mounted on the machine Safety system: front safety mats Tjdpfoz Enz Ujx Aa Isc EQUIPMENT Aluminum nesting table Suction cups for workpiece clamping Vacuum pump Drilling unit with 11 drilling spindles Milling spindle with automatic tool changer Tool magazine with 12 tool slots PC-based control Programming software Xylog Plus Protective guard permanently mounted on the machine Front safety mats

Condition: new, Year of construction: 2026, JUMBO Magazine for Bostitch N58, IC60 Nailers (395€/pc) JUMBO Magazine for Bostitch N80, N70i Nailers (355€/pc) The high-capacity JUMBO magazine allows for the use of an extended nail coil, accommodating approximately 800–1,000 nails. Large magazines enable uninterrupted work with fewer interruptions. Nailers equipped with JUMBO magazines are used in conjunction with industrial robots for pallet manufacturing. The JUMBO magazine is specially designed for Bostitch nailers. It offers increased capacity, allowing for storage of more nails. The robust construction ensures durability and reliability. Tedex Tg Ibepfx Aa Isc Easy magazine replacement enables quick and convenient operation. An ideal accessory for your nailer, ensuring efficiency and convenience.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 3,010 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller model: Fanuc Oi-MC, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 530 mm Travel range, Z-axis: 510 mm Table length: 1,200 mm Table width: 510 mm Orientation: Horizontal Tool interface: ISO 40 Max. spindle speed: 10,000 rpm Tedjz Ebb Uopfx Aa Iec Tool positions: 24 MACHINE DETAILS Control: CNC Control system: Fanuc Oi-MC Number of axes: 3 Power: 11 kW Dimensions & Weight Dimensions (L x W x H): 2,850 x 2,150 x 2,300 mm Net weight: 6,000 kg Shipping packages: 3 Operating hours: 3,010 h EQUIPMENT Spindle cooling Documentation CE marking External cooling Tool magazine Chip conveyor Tools included

Condition: excellent (used), Automatic machine with product feed conveyor in line set up for manual loading of the product on the belt or inserted in completely automatic lines. Todpfx Aoz D Uguja Ioc Suitable for packaging individual or already packaged products such as boxes, trays, hanks of cable, parquettes, or light to very light products with a minimum height of 3mm such as boxes, linen, reams of paper, magazines, leaflets. In production up to 23.09.2026 Price € 7,995.00 Quantity 2 machines available Shipping can be arranged for the buyer

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 12,850 h, controller model: Siemens Sinumerik 840 D, laser power: 2,400 W, stroke rate (max.): 600 1/min, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,650 mm, TECHNICAL DETAILS Laser type: TLF 2400 turbo Laser power: 2,700 W Working area X-axis without repositioning: 3,085 mm Working area Y-axis max.: 1,650 mm Travel speed X-axis max.: 90 m/min Tedpfxez Duvvs Aa Ioc Travel speed Y-axis max.: 60 m/min Simultaneous travel speed: 108 m/min Stroke frequency max.: 600 1/min Punching diameter max.: 76.2 mm Sheet thickness max.: 8 mm Punching force: 220 kN Workpiece weight max.: 230 kg Number of tools in the magazine: 18 pcs. MACHINE DETAILS Control system (software version): Siemens Sinumerik 840 D Pneumatic connection: 25 Nm³/h Electrical connection: 65 kVA Operating hours since power-on: 12,850 h (as of 07/01/2026) Dimensions & Weight Footprint (L × W × H): 7,900 × 8,700 × 2,400 mm Machine weight: 25,000 kg EQUIPMENT Capacitive distance control ContourLas Compact dust extractor Slag detection 18 tool cassettes 18 die holders 3 clamping jaws Automatic tool changer with 18 stations Rotation of all tools NC-controlled digital, maintenance-free AC drives Automatic repositioning Rapid shutdown of the hydraulics Automatic shutdown Tool length compensation 2 small parts slides 500 × 500 mm with sensors Quality list Punch scrap extraction Forming capability Programmable punch lubrication Programmable clamping system Adaptive stroke length control Safety devices Remote diagnostics RJ45 network connection Detailed operating manual Extensive tool set including 18 setup cassettes Storage cabinet, green TRUMPF Quickset TRUMPF Easylod Table extensions (custom-built) for processing sheets up to 4 m in length Existing spare parts, uninspected and without storage Chip conveyor with container Air-cushioned installation Multitool Thread forming

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: M+ Mazatrol, table load: 1,000 kg, TECHNICAL DETAILS Travel in the X-axis: 1,660 mm Tsdpfsz Ahw Hjx Aa Ioc Travel in the Y-axis: 510 mm Travel in the Z-axis: 510 mm Table dimensions: 2,000 × 510 mm Table load capacity: max. 1,000 kg Spindle speed: 7,000 rpm Tool holder: SK 40 Tool magazine: 48 tools MACHINE DETAILS Control system: M+ Mazatrol Machine weight approx.: 7,500 kg Space requirement approx.: 5 m² EQUIPMENT Chip conveyor: MAYFRAN 4th axis: Tilting rotary table: Rotamatik RM 100

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1234, input voltage: 380 V, input frequency: 50 Hz, Codix nailer fully rebuilt in Sophograf France 2 years ago. The machine is now setup to make doubleside stringpallets Todpfx Aasv Hh Hae Isc

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 14-250 001, workpiece diameter (max.): 80 mm, Title: Short Bar Loading Magazine FMB SL 80 S – Year of Manufacture 2004 – including accessories & forklift loading Description: Due to a change in our production processes, we are selling our FMB SL 80 S short bar loading magazine. The machine has operated reliably in our production up until now and is no longer needed due to the changeover. Tsdpoz Eh Unsfx Aa Iec •Manufacturer: FMB •Model: SL 80 S •Year of Manufacture: 2004 •Bar Diameter: 10 – 80 mm •Condition: Used Scope of Supply & Accessories: •Connection cable to the lathe (interface) is directly attached to the machine. •4 different sliding bars / feed bars for different material diameters are included. Loading & Logistics: •A forklift is available on site. •We will assist with loading onto your truck or the shipping company’s vehicle free of charge. Terms of Sale: The sale is exclusively to commercial customers (B2B) and is subject to the exclusion of any warranty and liability for defects. A proper invoice with VAT will be issued.

Condition: as good as new (ex-display), Used High Pressure Concrete Nailer HN 25 C2 MAX Powerlite The HN25C2 is a compact nailer for concrete and steel, allowing you to work as close as 6 mm from the edge, making it ideal for tight corners. Its main area of application is work on metal stud framing. The nose of the HN25C2 is compact, meaning you can also work with thin metal profiles. With special nails, it can penetrate steel up to 5.0 mm thick or drive nails into concrete with a compressive strength of 60 N. Technical specifications: • Operating pressure: 12–25 bar • Nail length: 15–25 mm • Magazine capacity: 100 nails • Air consumption: 1.6 ℓ/cycle at 18 bar operating pressure • Weight: 2.0 kg The nailer was used for demonstration purposes and is therefore classified as used. It is in perfect technical condition. Supplied in a transport case with user manual. For further details, please refer to the pictures. You will receive an invoice with VAT shown separately. Todpfeyizrfjx Aa Isc Payment in advance (bank transfer) only – no PayPal! Collection from our shop is of course also possible. Shipping by UPS – shipping costs €8.90. If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2014, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, working width: 3,200 mm, The machine has the following configuration: Number of machining units: 8 Pressure bar: With rubber belt Panel support stop: Present Overpressure: Present CNC positioning: Present Panel infeed trimming system: Present Number of units in the trimming area: 1 Number of units in the edge processing area: 6 Trimming unit Unit: Flush trimming unit Manufacturer/Model: RT30 Automatic time intervention: Present Motor power: 3.5 kW Speed: 9,000 RPM Edge banding Glue application system: EVA Heating lamps for edges: Present Edge magazine: Roller magazine Number of magazine positions: 6 Hot melt glue tank: Present Hot melt glue pre-melter: HM20 Pressure roller unit: Present Number of pressure rollers: 4 CNC positioning: Present End capping unit Manufacturer/Model: IT90-S Number of motors: 2 Maximum processing speed: 28 m/min Motor power: 0.65 kW Speed: 12,000 RPM Tjdoz Ekh Depfx Aa Isc Corner milling unit Manufacturer/Model: RF10 Number of motors: 2 Motor power: 1 kW Speed: 12,000 RPM Corner rounding unit Manufacturer/Model: AR30 Number of motors: 2 Automatic tool changer: Present Maximum processing speed: 18 m/min Motor power: 0.65 kW Speed: 12,000 RPM Edge scraping unit Manufacturer/Model: RB40 CNC positioning: Present Glue scraping unit Manufacturer/Model: RC20 Brushing unit Manufacturer/Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Speed: 1,400 RPM TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 150 mm Minimum panel width: 100 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Electrical connection power: 25 kW EQUIPMENT CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5062

Condition: used, Year of construction: 2008, workpiece height (max.): 40 mm, controller model: PowerControl P85, working width: 1,550 mm, working length: 4,175 mm, TECHNICAL DETAILS Working area, X-axis: 4,175 mm Working area, Y-axis: 1,550 mm Maximum workpiece thickness: 40 mm Number of working areas: 2 Traverse speed, X-axis: 80 m/min Traverse speed, Y-axis: 80 m/min Traverse speed, Z-axis: 30 m/min Table system: Beam table with vacuum cups Number of vacuum cup beams: 8 Positioning: CNC-controlled Drilling unit Position: Top Vertical drilling spindles: 20 Horizontal drilling spindles in X-direction: 10 Milling unit Position: Top Controlled axes: 4 + Flex5 Motor power: 15 kW Cooling: Liquid cooling Tool changer: Automatic Sawing unit Position: Top Tool magazine: 2 slots Tool magazine 1: 18 slots Position of tool magazine 1: Rear of the machine Tool magazine 2: 10 slots Position of tool magazine 2: On the machining head MACHINE DETAILS Control system: PowerControl P85 Machine programming software: WoodWOP 5.0 EQUIPMENT Beam table with vacuum cups 8 vacuum cup beams Vacuum pump Automatic tool changer Liquid cooling PowerControl P85 control system Tsdpfx Ajz Ekfvea Iec WoodWOP 5.0 machine programming software Note: Tools not included The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7350

Condition: used, Year of construction: 2010, controller model: PC85, working width: 1,750 mm, milling spindle speed (max.): 24,000 rpm, working length: 6,000 mm, TECHNICAL DETAILS Machining method: Drilling and milling Number of work areas: 2 Work area X-axis: 6,000 mm Work area Y-axis: 1,750 mm Number of controlled axes: 5 Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Table system: Console work table with vacuum cups Number of vacuum consoles: 10 CNC positioning: Yes Vacuum cups for workpiece clamping: Yes Number of vacuum cups: 40 Drilling unit Number of drilling units: 1 Position of drilling unit: Top Vertical drilling spindles: 20 Horizontal drilling spindles, X-direction: 5 Horizontal drilling spindles, Y-direction: 5 Total drilling spindles: 30 Milling unit Number of milling units: 1 Position of milling unit: Top Controlled axes: 5 Motor power: 12 kW Speed: 24,000 rpm Liquid cooling: Yes Automatic tool changer: Yes Number of tool magazines: 1 Tool positions: 72 MACHINE DETAILS Control: PC85 Programming software: WoodWOP 5.0 Vacuum pumps: 2 Individual output per vacuum pump: 250 m³/h Total connected power: 49 kW EQUIPMENT Console work table with vacuum cups 10 vacuum consoles with CNC positioning 40 vacuum cups for workpiece clamping Tjdpfx Aez Ekb Dea Ijc 2 vacuum pumps Top drilling unit with 30 drilling spindles Top 5-axis milling unit with 12 kW electric motor spindle Liquid cooling Automatic tool changer Tool magazine with 72 tool positions PC85 control WoodWOP 5.0 programming software Automatic chip extraction Safety mats on the front of the machine Safety sensors Fixed safety guards CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8167

Condition: used, Year of construction: 2004, workpiece height (max.): 60 mm, workpiece width (max.): 2,800 mm, workpiece length (max.): 1,300 mm, edge thickness (max.): 20 mm, feed rate X-axis: 40 m/min, The machine has the following configuration: Gluing Gluing system: EVA Adhesive application: single-sided and double-sided Scoring saw Motor power: 2.2 kW Speed: 6,000 min⁻¹ Profiling unit Tsdpfxez Ekczs Aa Isc Motor power: 6.6 kW Speed: 6,000 min⁻¹ Cross-cutting saw unit Number of motors: 2 Edge trimming unit, top and bottom Number of motors: 2 Motor power: 1.85 kW Speed: 12,000 min⁻¹ Edge rounding unit Number of motors: 2 Motor power: 1 kW Speed: 12,000 min⁻¹ Profiling unit with automatic, time-controlled engagement Motor power: 6.6 kW Speed: 6,000 min⁻¹ Profiling unit with automatic, time-controlled engagement Motor power: 6.6 kW Speed: 6,000 min⁻¹ Belt sanding unit Motor power: 2.2 kW Belt sanding unit Motor power: 0.75 kW Brushing unit Motor power: 0.75 kW Brushing unit TECHNICAL DETAILS Workpiece length: 280–1,300 mm Workpiece width: 320–2,800 mm Workpiece thickness: 8–60 mm Edge thickness: max. 20 mm Feed speed: max. 40 m/min MACHINE DETAILS Control system: ICOS OPEN EQUIPMENT Chain conveyor with drive shoes Pressure bar with rubber belt Edge heating lamps Roller magazine Hot-melt adhesive tank Hot-melt adhesive pre-melter Edge pressing unit with 9 pressing rollers CE-compliant The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 340-0 / 511, functionality: fully functional, Machine available from November 2026 Sold on behalf of a customer Workpiece length min. 180 mm Workpiece width min. 60 mm Edge thickness (coil stock) 0.4 - 3 mm Tjdpfx Ajz Hpi Asa Isc Edge thickness (strip stock) max. 15 mm - Multi-edge magazine (Ostermann) - 1888 Control panel - Motor-adjustable infeed guide, PLC controlled - 1961 Pre-milling unit - 1901 Edge magazine, fully automatic - 1905 Glue station for granules & cartridge with storage hopper Processing of EVA & PUR adhesives - 1913 Pressing unit with pneumatic, adjustable pressure. Adjustment based on edge thickness, motor-driven, PLC controlled - 1918 Trimming unit 2, motor-driven, pneumatic adjustment 0 - 12° - 1823 Flush trimming unit, up to 15 mm - 1942 Multi-milling unit, flush, chamfer, radius, pneumatic - motor-driven, PLC controlled - 1983 Corner rounding unit - 1929 Radius scraping unit - 1964 Surface scraping unit - 1940 Buffing unit - 1856 Spraying system, front for release agent, rear for cleaning agent - Extendable support - Dimensions L/W/H 5920 / 1250 / 2170 - Weight approx. 1825 kg

Year of construction: 2020, condition: used, Bar length: 3000mm, max. bar diameter: 80mm, operating cycle: fully automatic, monitoring and fault diagnostics: via display, part length: presettable, feed control: AC servo motor, bar diameter: adjustable via PLC keypad in 1mm increments, remnant extraction: to the rear or ejection to the front, guide channels: Vulkollan plastic, usable magazine width: approx. 900mm, control: integrated PLC, weight: approx. 2500kg. Documentation available. An on-site inspection is possible. Todpfx Aaezzdyhj Isc

Condition: used, Year of construction: 2007, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, controller model: PC22, TECHNICAL DETAILS The machine has the following configuration: Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min Pressure bar: with rubber belt Panel stop: with CNC positioning Panel infeed alignment system: available Edge application unit Processing interval: automatically time-controlled Motor power: 3 kW Speed: 9,000 rpm Edge processing Edge heating lamps: available Roller magazine: available Hot melt adhesive reservoir: available Hot melt adhesive pre-melter: available Number of pressure rollers: 7 Positioning: CNC-controlled Trimming unit Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Flush trimming unit, top and bottom Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge rounding unit Manufacturer/Model: FF12 Number of motors: 4 Motor power: 0.4 kW Speed: 12,000 rpm Profile trimming unit Number of motors: 1 Processing interval: automatically time-controlled Motor power: 5 kW Speed: 11,600 rpm Scraping blade unit Manufacturer/Model: PN10 Glue scraping blade unit Brushing unit Number of motors: 2 Spray device: available Tsdpoz Ekbkefx Aa Iec MACHINE DETAILS Number of processing units in edge processing: 7 Control system: PC22 EQUIPMENT Pressure bar with rubber belt Panel stop with CNC positioning Panel infeed alignment system Edge heating lamps Roller magazine Hot melt adhesive reservoir Hot melt adhesive pre-melter 7 pressure rollers Trimming unit Flush trimming unit, top and bottom Edge rounding unit FF12 Profile trimming unit Scraping blade unit PN10 Glue scraping blade unit Brushing unit with spray device PC22 control The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 6042

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 2,300 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 600 mm Work area, fixed table Work area, X-axis: 925 mm Work area, Y-axis: 800 mm Work area, Z-axis: 600 mm Clamping area: 1,400 × 750 mm Work area, rotary table Work area, X-axis: 780 mm Work area, Y-axis: 800 mm Work area, Z-axis: 600 mm Clamping area: 800 × 630 mm Tedpfoz Epg Eex Aa Iec Tool holder: SK 40 Tool magazine: 30 positions Spindle speed: 50–12,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Spindle: Kessler motor spindle EQUIPMENT 6th axis prepared Handheld control unit Internal cooling system with filter system Filter system: 500 l Chip conveyor Blum laser 2 extraction systems Machine hood

Year of construction: 2018, condition: used, We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95. The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box. Also some tool pots are damaged. Can be repaired or used as spare parts Tjdjvfdvbspfx Aa Ioc *

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,450 mm, total height: 1,790 mm, total length: 3,470 mm, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes. Foudila deck nailing machine, DNM-153 is a compact, flexible, and efficient machinery for production of decks for pallet industry to an excellent price-performance ratio. Thanks to the machine’s high production speed, user-friendly design and board magazines with large buffer, it is well suited for manufacturing both standard and special products in small and large production series with only one operator. The machine is capable of producing over 1000 decks per work shift. The machine is equipped with three nailers with magazines for large nail coils. Each nailing pattern can include 1–3 nails and can also be clinched if needed. The boards are fed into magazines with a large buffer – three cassettes for stringer/under boards and one cassette for deck/upper boards. The machine is controlled and programmed via a modern and user-friendly software interface on a 10” touchscreen, using a Beckhoff control system. Thanks to the machine’s compact design, it requires a very small production footprint and makes installation fast and easy because the machine can be delivered fully assembled. Todeyl Tr Nopfx Aa Ijc The machine can of course be equipped with a conveyor for finished products, automatic stacker and automatic board feeder. These options can also be installed at a later stage, allowing for investment step-by-step. Please feel free to contact us for more information, technical specifications, and price details.

Year of construction: 2001, condition: used, Number of guide tubes: 3, mains connection: 380V, 3-phase, frequency: 50Hz, control voltage: 24VDC, rated current / FLA: 5A, an on-site inspection is possible, not connected to power. Tsdjz Egffopfx Aa Isc