Used Paper Rolls for sale (9,031)

Condition: used, functionality: fully functional, Year of construction: 2009, load capacity: 7,500 kg, construction height: 1,200 mm, empty load weight: 1,620 kg, Paper roll clamp Load centre of gravity: 650 Gujdeu Dy Hkepfx Afcea ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: very good Description: Arm height: 1x 1290 mm 2x 515mm, opening width 420 / 1,300 mm, rotation range 360 endless Arm height: 1x 1290 mm 2x 515mm, opening width 420 / 1,300 mm, rotation range 360 endless

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: Gedpfxsu Tg Spo Afcjua 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: used, functionality: fully functional, Year of construction: 2008, load capacity: 3,000 kg, Paper Roll Clamp Godpfeyzdftox Afcsua ISO Class: ISO Class 3 = 2,500 - 4,999 kg Technical Condition: good Description: Year 2008 ISO 2A / 3A Capacity 3,000 kg Rotator 180° Opening range 250-1,300 mm Width 770 mm Contact pads 400x250 mm ID OS1936

Condition: used, Vacuum lifting device for paper rolls NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg Holland type R96-20 No. 9745 Year of construction 1999 Load capacity 2000 kg Centering pin Ø 90 mm Suction surface outside diameter 850 mm (plus seal) Suction surface inner diameter 250 mm (minus seal) Seal width 50 mm Suction area 0.5 m2 Vacuum min. -800 mbar Suction capacity approx. 100 m³/h per vacuum pump Motor power 2x 2.2 kW Mains connection 400 Volt, 50 Hz - 2 Rietschle vacuum compressors, type VCE 100 Dimensions Ø x H 1600 x 2250 mm Height with centering mandrel 2500 mm Total height in transport frame 2950 mm Dead weight 2.5 tons Gsdpfx Afodzqc Iocsua

Condition: used, Year of construction: 1975, functionality: fully functional, Paper Cutting and Rewinding Machine – Goebel Guedpfoxcxluex Afcea Robust industrial equipment, manufactured in Germany, specifically designed for slitting and rewinding paper rolls. Delivers high precision in processing large reels and is ideal for preparing material for printing houses, packaging production, and other applications in the paper industry. Its solid construction and proven reliability ensure successful operation even after decades of use.

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 4,000 kg, Paper roll clamp Load center: 650 Guedpfx Afjx Racyecea ISO Class: ISO Class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully operational Technical condition: good Description: Year 2020 ISO 4A (61 cm) Capacity 4,000 kg Rotator 180° Opening range 250-1,300 mm Width 1,200 mm ID OS1813

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 3,900 kg, Paper roll clamp ISO Class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Gusdpex N U S Hsfx Afcoa Description: Year 2019 ISO 3A (51 cm) Capacity 3,900 kg Rotator 360° Opening range 220-1450 mm Width 1,000 mm ID OS1770

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 3,900 kg, Paper Roll Clamp ISO Class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully operational Technical Condition: Good Gjdpfjx N U Syex Afceua Description: Year 2019 ISO 3A (51 cm) Capacity 3,900 kg Rotator 360° Opening range 220–1,450 mm Width 1,000 mm ID OS1769

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 6,500 kg, Paper roll clamp ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: good Gujdpfx Aevbmtbofcja Description: Year 2017 ISO 4A (61 cm) Capacity 6500 kg Rotator Opening range 500-1300 mm Width 930 mm Contact pads 280x1200 / 280x500 mm ID OS1413

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 6,500 kg, Paper roll clamp ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Gjdpfst S Sq Hjx Afceua Technical condition: good Description: ISO 3A/4A Year 2018 Capacity 6500 kg Opening range 500-1300 mm Width 930 mm Pad 1200x270 ID OS1252

Condition: used, functionality: limited functionality, Year of construction: 1990, load capacity: 2,700 kg, Paper roll clamp ISO Class: ISO Class 4 = 5,000 - 10,000 kg Condition: Limited operational readiness Technical Condition: Poor Gedpfxew Dlh Is Afceua Description: Year 1990, ISO 4A (61 cm), Capacity 2700 kg / 800 mm, Width 800 mm, Pad 1100x970, ID OS847

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 4,600 kg, Paper roll clamp Guodpfx Afjw Dwrrocja ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2014 ISO 4A (61 cm) Capacity 4,600 kg Rotator 180° Opening range 250-1520 mm Width 930 mm Contact pads 280x500 mm ID OS1553

Condition: used, Year of construction: 2019, load capacity: 1,200 kg, Paper roll clamp Gedpfxjud Eaaj Afcjua ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: ISO 2A (41 cm) Year 2019 Capacity 1200 kg Opening range 530-1670 mm Clamp length 1000 mm Contact pads 250x900 mm Tilt range: 90° Width 1100 mm ID OS1386

Condition: used, Year of construction: 2010, load capacity: 2,300 kg, Paper roll clamp ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Guodpfxsul Idlj Afcoa Technical condition: good Description: Year 2010 ISO 3A (51 cm) Capacity 2300 kg Rotator 360° Opening range 250-1300 mm Width 950 mm Contact pads 250x365 mm ID OS1371

Condition: refurbished (used), Year of construction: 2012, LYISH Rewinder for Toilet paper and Hand towel rolls, and NON-woven rolls. Standard pyramid pattern for max volume. Rolls are perforated to length of 115mm (other sizes can be adjusted) Gsdpfx Aod Skg Rsfcoua Rolls length setting on PLC screen. The rolls are sealed with glue line and tail cutting. Also optional - coreless rolls production on Stainless steel mandrel Specifications: - Rewinding speed (max.) 350 m/min - Paper width – 2.75 m (Max) - Parent reel dia. – 1.25 m (Max) - Product dia. 350 mm (max.) - Pneumatic lifting arms for jumbo roll - Paper grade 17-70 g.s.m. single or double ply - Perforation – standard system includes 4 rotating blades, distances between perforation lines changes by changing gears. - Embossing – steel to rubber, standard pyramid pattern (special pattern – optional). -Core guiding system for logs – preventing conic edges during rewinding of large diam rolls - Finishing station including glue injection, cutting and turning the rolls for adhesion forming a tail seal. - Automatic ejection of finished rolls sideways out of the machine. - Machine is supplied as standard together with two 75 mm dia. mechanical shafts for the jumbo roll. - Power – 18 kw - Weight – 6500 kg The machine was refurbished by the producer - LYISH , and will be supplied with guarantee for 12 months. On line Slitting system (Slitter-Rewinder) - optional, can be added if required. Edge embossing system - optional (can be added if required) Full CE safety covers - optional (can be added if required)

Condition: good (used), HPM 92 Paper Cutting Guillotine Machine in very good condition, ready to work. Year of manufacture: 2009. High quality. Technical specifications: Cutting width: 920 mm Stack height: 120 mm Weight: 2500 kg 380V power supply Equipment: – Programming unit with color touchscreen monitor (Mitsubishi Manufactured) Gsdpfx Ajywdpkofcjua – Air table – Enlarged side tables – Photocells – Chrome table surfaces – Spare knife Machine modeled after the German Polar, very solidly built, with Western electronics (Schneider, Mitsubishi, Eaton). Very stable rear frame construction, CNC rail guidance, ball screw drive.

Condition: good (used), Perfecta BSB 3L Paper Jogger with Roller The machine is 100% functional and in perfect condition. Gsdoyur Hqspfx Afceua This is the latest design from a German manufacturer. Year of manufacture: 2016. Technical specifications: Maximum format: 1150x900mm Stack height: 160mm Weight: 550kg Power supply: 400V Air squeezing roller Air table with micro-perforation Tilt angle adjustment Jogging frequency adjustment (inverter) Adjustable force and speed of the air squeezing roller. Chrome-plated table surface Full documentation set.

Condition: refurbished (used), Year of construction: 2000, Have a Special Folder Completely Rebuilt with New Rollers & New Gears. Anybody interested please feel free to reach out. H&H Folder with the following Details: 8 Plates + 6Plates - Gremser Flatpile Feeder (Year:2012) - Mobile Feeder with height adjustment, 50X70. - First Unit: H&H M7.32 52/8. Working width: 52 (Year:1999) Gujdpowcln Esfx Afcoa -Second Unit: H&H KL 112 45/6 1. Extended Delivery 2. Cutting Unit for 2-3 Up Production. (Year:1999) (Working Width: 42cm) 3. Stacker VERY SPECIAL FOLDERS FOR A VERY SPECIAL PRICE

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Gsdswk Rlxspfx Afceua Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: like new (used), Ideal 5255 paper cutting guillotine The machine is 100% operational, after a review in very good condition. This is the currently produced model, the latest model. Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm max distance between the saddle and the knife: 520mm power supply 230V Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with an accuracy of 1/10 mm Guedpfx Aou Ul Uxofcea electronic handwheel with stepless speed adjustment of the backgauge mm/inch switching Electromechanical drive of the knife and pressure beam Transparent safety covers laser cutting line two-hand cutting start, electronically controlled automatic return of the knife from any position Additional equipment includes: side tables, a spare knife, a split, tools for replacing the knife, including a safe grip, tapping block and documentation.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, overall weight: 4,000 kg, power: 17 kW (23.11 HP), total width: 1,510 mm, total length: 6,500 mm, total height: 1,820 mm, Automatic paper roll paper lid machine with inline packing machine for 8oz and 12oz cups Speed - 70~100 pc/minute Raw material - One-side or two side (polyethylene)film coated/laminated paper (Like the PE coated paper; PLA paper; card boad paper with film) Paper Lid Size - for 8oz and 12oz Godpexur Hisfx Afcoua Working Power - 12kw Total Power - 17KW, Power Source - 3-phase, 380V, 50/60Hz, User Need To Buy Air Compressor

Year of construction: 2025, operating hours: 10 h, condition: new, functionality: fully functional, I want to sell a paper dish making machine which makes 4 inch drones of good quality Gusdpjyy U R Rsfx Afcsa

Condition: not inspected (used), Year of construction: 1985, functionality: unexamined, machine/vehicle number: 0485.1184.463, outer diameter: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you are obliged to collect the item within the designated period: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Tank diameter: 1,300 mm Guodpfjynkapjx Afcea MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,500 x 1,800 mm Machine weight: 700 kg External reference: Pieper - Lot 5

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, stack height: 200 mm, paper weight (min.): 36 g/m², paper weight (max.): 160 g/m², product width (max.): 520 mm, roll diameter: 1,370 mm, TECHNICAL DETAILS Unwinder: Maximum production speed: 250 m/min Maximum web width: 520 mm Minimum web width: 150 mm Maximum roll diameter: 1,370 mm Maximum roll weight: 800 kg Slitter: Maximum production speed: 250 m/min Maximum web width: 520 mm Minimum web width: 150 mm Paper thickness: 36 g/m² to 160 g/m² Cutting accuracy: +/- 0.2 mm Continuously variable format setting: 4" - 25" Continuously adjustable cutting width: 5 mm to 80 mm Stack counter/stacker: Minimum stack length: 100 mm Maximum stack length: 635 mm Minimum stack width: 115 mm Maximum stack width: 720 mm Minimum stack height: 100 sheets Maximum stack height: 200 mm Maximum production speed: 250 m/min (depending on paper thickness) Paper thickness: 36 g/m² to 160 g/m² MACHINE DETAILS Unwinder: Power supply: 32 A; 400 V, N, PE Compressed air: Min. 6 bar (dry) Slitter: Power supply: 32 A; 400 V, N, PE Compressed air: Min. 6 bar (dry) Stack counter/stacker: Power supply: 35 A; 400 V, N, PE Compressed air: Min. 6 bar (dry) Folding station: Power supply: 50 A; 400 V, N, PE EQUIPMENT Electrical documentation Guodpfx Asyzpw Uefcsa Full flexibility for cutting and residual formats Format and length changes via operator panel Longitudinal cuts with knife holder possible Waste extraction possible (extractor not included in the system) Can stack up to two sheets simultaneously

Condition: excellent (used), Year of construction: 1985, Ref:11083 . 1985 COMO 220 MC2 Guillotine. Swedish built heavy-duty guillotine for accurate cutting of paper and heavier substrates. Refurbished 2010 and upgraded to computer programme. Comprising; Right side table to facilitate rear loading of cutting bed Central air table Guedpfsy Awy Hox Afcea Steel side tables Computer programme cut control, with keypad input of data Twin cut control buttons Variable pressure clamp control Swift knife change system and adjustment Powered variable speed back gauge I.R. light beam guarding to UK HSE spec. 2 x HSS knives Including knife change tools and accessories. Specification: Cut width, Max: 220 cm Cut depth, Max: 220 cm Clamp opening :18.5 cm Electrics: 415V, 30A, 50Hz