Used Corner Staplers for sale (2,384)

Condition: used, Elektrischer Eckenrunder / Electric Corner Rounder Pescha Round Corner Machine Nsdpfx Aeyzi Iaeprswk Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Double side corner cutter Very good condition. This is a professional, production device for rounding corners. Solid construction ensures precision of operation. Nodpfeztpbbsx Aprowk Two trimming heads. Interchangeable knives. Adjustable margins. Controlled by foot pedal. One set of 8mm knives included Stack height approx. 80mm Weight 100kg Efficiency 20 cycles/min Compressed air supply.

Condition: excellent (used), Year of construction: 2000, Ref:11124 . 2000 Rimagraf Multi Clipper Metal Cornering Machine. A semi-automatic electric and pneumatic two-head machine that simultaneously applies and presses two SYMMETRICAL metal corners of any type and size. The left head is fixed, while the right one can be easily adjusted (from a minimum of 120 mm to a maximum of 500 mm) depending on the size of the cover you are using. The corners are placed in the two loading tanks, which rotate to place them on the guide channels. Finally activate the pressing cycle using the foot pedal. Size-change requires only minimum adjustment. Technical data: Manual load Nwsdszmx Hmjpfx Aprek Pneumatic connection required Operating voltage: 380V, 50-60Hz Dimensions: 600 x 1250 x 1400 mm Total weight: 180 kg.

Condition: used, Year of construction: 2010, 4-head welding machine Automatic corner cleaning machine Nwsdpfjzv S Eusx Aprsk

Condition: used,

Condition: used, Year of construction: 2021, operating hours: 70 h, construction width: 1,100 mm,

Condition: good (used), machine/vehicle number: 8195, Operating principle: hydropneumatic Pneumatic operating pressure: 8 bar Air consumption: 40 liters/stroke Pressing force: 32 kN at 8 bar Air connection: R 1/4” Punch stroke: 17 mm Nwjdpfxezwqvzj Aprsk Counter-stroke: 140 mm Punching height: Max. 150 mm Profile height: Max. 210 mm Operating manual: Available Dimensions (width x depth x height): 900 x 1180 x 750 mm Weight: 360 kg

Condition: excellent (used), CATALOGUE NUMBER 8010 TECHNICAL DATA Njdpfozw Dx Aox Aprowk Equipment: - table - pre-milling - belt feeder - 2 glue tanks: for granules and cartridges - currently, the machine uses hot melt adhesive (granules) - guillotine – for pre-cutting veneer - 3 pressure rollers - 2 trimming units with saws for final trimming - 2 milling units for edge shaping (radius cutters) - corner rounding unit - sanding units – for removing excess glue - polishing units - stepless feed rate adjustment 8-18mm - workpiece thickness 6-45mm - minimum workpiece length 180mm - minimum workpiece width 600mm - maximum veneer thickness fed from a roll 3mm - air consumption 6-8 bar - dust extraction nozzle diameter 7x80mm, 1x130mm - dimensions L/W/H 6650x1260x1700mm - weight 1850kg ADVANTAGES – Made in Germany – Spray system – Pre-milling and corner rounding – 2 glue tanks – Includes 4 additional milling cutters – Unpainted – Original technical documentation and CE marking – Very good condition – Used veneer edging machine Net price: 49900 PLN Net price: 11880 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2012, URBAN welding and cleaning line consisting of two 4-head URBAN AKS 6410 welding machines, including an automatic conveyor belt running perpendicular to the welding machines, with a URBAN SV 800/2 automatic corner cleaning machine with two heads and an infeed/outfeed table. Nodszu S Exopfx Aprswk Operated in single-shift production, in very good condition, programmed for VEKA profiles. Includes welding supports, safety fences, and tools for the automatic corner cleaning machine. WINDOWS-based control system, network compatible. Product capacity: at least 200 frames/sashes in 8 hours.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Urban ESB 500 corner and scissor drilling unit with drill heads for Siegenia fittings Nodpfoyza Dfex Aprjwk

Condition: used, Hydropneumatic operation Nedpfx Apsw Inudsrjwk Max. punching height: 90 mm Abutment stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Year of construction: 2008, condition: ready for operation (used), Zwei Eckverbindungsmaschinen Schüco für den Fensterbau stehen zur Verfügung. 1) Schüco CC 120 A, Baujahr: 2008, max. Profilhöhe: 120mm, max. Stanzhöhe: 105mm, min. Rahmen-Innendimensionen X/Y: 400mm/400mm, Maschinendimensionen X/Y/Z: ca. 1450mm/1500mm/1000mm, Gewicht: ca. 700kg. 2) Eckverbindungsmaschine Schüco, Baujahr: 1997, Nenndruck: 0,7MPa, Luftverbrauch: 100l/Ecke, Gewicht: ca. 650kg. Eine Besichtigung vor Ort ist möglich. Nedpfewwlk Asx Aprjwk

Condition: good (used), Year of construction: 2006, Built in 2006 Size max 670x390 mm min 205x140 mm Speed 3.900 c/h Description: - with round corner device - Automatic setting - Motorised setting - Automatic case counter - Board pre stacking conveyor - Board cutter: PS - Centre strip infeed (flexible) - Waste chopper - Cloth feeder: Non-Stop - Glue unit - Preheated glue tube Nwodpfezlbdrox Aprek - Viscosity control - Device for producing padded cases - Pressing station - Stacking delivery

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 1,000 kg, fuel type: electric, fork length: 1,170 mm, total length: 1,662 mm, drive type: Elektro, construction width: 540 mm, Mast type: None Technical condition: New Nwedswtu Tfepfx Aprjk Battery voltage: 12V Battery capacity: 60Ah Battery year: 2024 Battery condition: New Drive: Manual; Lift range: 85–100 mm; Drivable up to height: 400 mm; Load center: 600 mm; Steering wheel material: Nylon; Fork rollers specification: Single; Lowering speed with/without load: 0.1 m/s / 40s; Chassis RAL color: RAL 5018 turquoise blue; Integrated charger for easy charging

Condition: used, functionality: fully functional, load capacity: 300 kg, Technical condition: New Description: - WxDxH 1200x800x1950 mm - RAL5010 gentian blue - approved for 2 persons - access from the wide side - incl. 2 PPE anchor points and tool tray - fork pockets (mm): A=620 B=188 C=94 Nsdsy Hapxepfx Aprjwk

Condition: used, functionality: fully functional, load capacity: 300 kg, Technical condition: New Njdpfsy Han Iex Aprewk Description: - WxDxH 1200x1080x1950 mm - RAL5010 gentian blue - approved for 2 persons - entry from the wide side - incl. 2 PPE anchor points, foldable - fork pockets (mm): A=620 B=188 C=94

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 3,500 kg, fuel type: diesel, empty load weight: 5,416 kg, total length: 4,540 mm, drive type: Diesel, Mast type: None Technical condition: New Front tires type: Air Nedsvcf Umspfx Aprjwk Front tires size: 16/70-20 Rear tires Type: Air Rear tires Size: 12-16,5 CE certificate, STANDARD EQUIPMENT - Tiltable cab with tilt support - Safety belt with sensor monitoring - Audible reversing alarm - Emergency stop button - Rotating beacon - Hill holder - Hill start assist - Negative brake - Rear-view mirror - Steering wheel adjustable in inclination and depth - Joystick for overall control of all main functions - Armrest - Inching pedal - ECO Mode system - Digital display - Diesel filter with water separator FORKS - Fork 1.200 mm - Fork carriage plate 1,260 mm type FEM III - Integrated sideshift

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 3,500 kg, fuel type: diesel, empty load weight: 5,416 kg, total length: 4,540 mm, drive type: Diesel, Mast type: None Technical condition: New Front tire type: Pneumatic Front tire size: 16/70-20 Rear tire type: Pneumatic Rear tire size: 12-16.5 CE certificate, Nwsdoxgkncjpfx Aprok

Condition: used, Year of construction: 1994, The price includes several sets of stamping dies as well as new editions. Nwjdpfezqvbcex Aprek

Condition: used, Edge rounding machine, electric, with 1 extra set of blades. Machine is in good condition and available immediately. Njdpfx Aezmqfhsprjwk If you are interested, we would also be happy to provide you with information about other machines in our inventory. You are welcome to inspect the machine at our premises by prior appointment.

Condition: good (used), OFFER 21100 Technical specifications: - Table dimensions approx. 1700 x 1700 mm - Side length each approx. 700 mm - Welded steel construction made of flat steel 100 x 30 mm - Table height approx. 850 mm - Table area approx. 2.3 m² - Various clamping tools Nwsdpjgmnknsfx Aprok - Weight approx. 1500 kg

Condition: excellent (used), functionality: fully functional, Catalogue number 7364 Nwodpfx Apsztaq Terjk TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - working table (L/W): 410x1000 mm - motor: 11 kW - 2 pneumatic material clamps - extraction port diameter: 160 mm - dimensions (L/W/H): 1070x1260x1400 mm - weight: 650 kg ADVANTAGES – Made in Germany – Additional set of cutters + copy template – Not repainted – Used milling machine, in very good condition Net price: 33,900 PLN Net price: 8,070 EUR according to 4.2 exchange rate (Prices may change with significant exchange rate fluctuations)

Condition: good (used), Container corner fitting, container corner, container parts -Number: 18 corner fittings available -Price: per piece -Cast embossing: DL TR DL BR -Height: 160 mm -Dimensions (individual): 178/120/H160 mm -Weight: 11 kg/piece Nwedpfsg A U Rasx Aprok

Condition: good (used), Year of construction: 1993, Omga Pneumatic Corner Frame Assembly Machine Model: Joint 502 For assembling popular types of frames. During the stapling process, the machine operator has a clear view of the frames and can, if necessary, make required positional adjustments. The two frame components are placed into the stop and locked in position by a pneumatically actuated clamp equipped with a special rubber pad to prevent damage to delicate frames. The stop is adjustable, allowing for the insertion of two staples at the desired distance. The Joint 502 allows for two different staples, even of different sizes, to be inserted at the required axial spacing, with the two staple units positioned accordingly. Nodeyy S Uaopfx Aprjwk Location: Available from stock, 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2021, Exhibition machine Year of manufacture: 2021 (Table machine) For stationary profiling of head edges on soft-forming and post-forming workpieces. Also for edge trimming on thick PVC edges with right-angled workpieces and multi-sided gluing. The processing of symmetrical and asymmetrical soft-forming and post-forming profiles is possible after manual profile depth adjustment. The motor feed is performed manually by sensing the workpiece. Basic equipment: - Workpiece stop system - Pneumatic clamping cylinder - 1 milling motor, 0.8 kW, steplessly adjustable up to 27,000 rpm, standardly equipped with radius cutter R=2. Sensing is performed by a guide ring on the workpiece. - Aggregate guidance on precision linear guides. Technical data: Workpiece thickness: max. 55 mm Workpiece width: min. 80 mm Workpiece length: min. 110 mm Nwjdskwhapspfx Aprsk Soft-forming profile depth: max. 50 mm Edge thickness: max. 4 mm (depending on the edge material) Milling tool: Radius cutter R 2 Electrical connection: 230V / 50Hz / 1 phase Total connection: 0.8 kW Pneumatic connection: 6 bar Space requirement: approx. 740 x 460 x 500 mm Net weight: approx. 45 kg Availability: short-term Location: Solingen