Used Corrugated Board for sale (4,249)

Condition: excellent (used), Year of construction: 2021, type of input current: three-phase, input voltage: 400 V, overall weight: 600 kg, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a ZECHINI Symphony 3 machine for creasing cardboard with a thickness of 1.5 mm to 4 mm, equipped with V-profile blades (120° angle). The machine allows for creasing in up to four different points without creating dust, and also enables kiss-cutting of the cardboard. The machine is used in the production of both rigid covers and boxes; it also allows for trimming the corners of the sheet. Dodpo Aaynpjfx Ab Ascp The machine has been used very little. It is possible to purchase additional V-profile blades (90° angle) and U-profile blades.

Condition: used, Mit der BAHMÜLLER ZH 29 Drahtheftmaschine werden Wellpappe und Vollpappe mithilfe von Heftklammern aus Flachdraht formschlüssig miteinander verbunden. Die BAHMÜLLER Heftmaschine ZH 29 wird mit einem Heftschuh und einem Auflagetisch ausgerüstet, um größere Zuschnitte leichter handhaben zu können. The BAHMÜLLER ZH 29 Wire Stitcher uses flat-wire staples to join corrugated and solid board together in a form-fit manner. The BAHMÜLLER ZH 29 stitcher is equipped with a stitching shoe and a support table to handle large size blanks. Drahtheftmaschine / Wire Stitcher BAHMÜLLER ZH 29 Baujahr / Year 1999 - Serial-No. WH-03562 Ausladung / Projection 1250 mm Dcjdpfx Asz Hw Igsb Asp Standardheftleistung / Stitch Capacity 300 Klammern/min. (staples/min) Heftgutstärke bis 25mm / Board Caliper Up to 25 mm (1”) Klammerbreite / Staple width 15mm oder (or) 18mm Technical Details: Stromaufnahme / power supply 0,25 KV/A Nettogewicht / Weight ca. 400kg Platzbedarf / Space requirement L 1660mm x B 430mm H 1580mm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Technical specifications • Sheet width: 1700 mm • Maximum sheet dimensions (X/Y): 1700 mm / 4000 mm • Minimum sheet dimensions (X/Y): 300 mm / 600 mm • Cardboard thickness: from 2 mm to 8 mm • Single production run: 200–600 units/hour • Maximum multi-unit production capacity: up to 2000 units per hour Dsdpfxjz A Tfgj Ab Ascp • Machine weight: approximately 4500 kg • Machine dimensions (X/Y/Z): approximately 5500 mm / 4000 mm / 1900 mm

Year of construction: 1985, operating hours: 75,240 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0574 028 07, Largest sheet size: 1420 x 1020 mm Smallest sheet size: 700 x 500 mm Maximum punching force: 600 t Gripper edge: 18 – 22 mm Maximum number of cycles per hour: 6000 Processable materials: Cardboard 100 – 1000 g/m² Corrugated board F, E, B, C, F/F, F/E, F/B, E/E, E/B - Flatbed die-cutter with waste separation station, intermediate sheet insertion, and pre-stacking device, working platform, - 1 x preparation table for external tool preparation - 6 x frames for blanking dies - 6 x closing frames for die-cutting tools - 6 x tool carts Djdpfxszg D I Ne Ab Ascp

Condition: used, Year of construction: 2016, functionality: fully functional, total height: 3,900 mm, total length: 15,500 mm, The machine underwent a major overhaul in 2026 for approximately 20,000 euros. The system features large carton magazines with a stacking height of 2200 mm. The machine has a large waste management system. The Nextmode has 5 magazines arranged in a row and an SbS function, allowing up to two widths of continuous corrugated board to be placed side by side in each magazine. The system has 8 longitudinal tools for highly flexible production of cardboard packaging. Djdpfxez A Edzs Ab Aecp In addition to the standard creasing tools, the system also has a fine perforation technology in all tool groups. The system is currently still in operation and can be inspected upon request. It can handle cardboard grades up to 2.9 BC flute (thickness approx. 7 mm). The machine will be available from approximately November 2026. A price quote will be provided upon request.

Condition: good (used), Year of construction: 2020, In this offer you purchase a used collaboration board "Cisco Webex Board 85S" Object of sale: 1 x Cisco Webex Board 85S: approx. 21 boards in stock also available in size 70" and 55" Without stand/wall mount The Webex® Board is an all-in-one device that offers everything you need to collaborate with your teams in physical meeting rooms. You can present wirelessly, use whiteboards and make video and audio calls. And it securely connects to your virtual teams via the Webex service or via your Webex app-enabled devices, so you can take your meetings and content on the road. Condition: This offer is for a used device that may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for functionality Packaging and dispatch: Dcedpfeqydw Ijx Ab Aop You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, Kreischere zum Vorrillen und Schneiden von Wellpappe in einem sehr guten Zustand.  Dcsdpfs Afxr Sex Ab Ajp Board Cutter for Pre-Creasing and Cutting of corrugated cardboard, in very good Condition. Kreisschere - Rillmaschine / Board Cutter KIRBY 4 CRCCTW Serial-No. 169 4 Kreismesser gezackt / 4 knives Arbeitsbreite / Working width max. 2600m Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: like new (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: DS 013.0091, RAW MATERIAL TOWER PME YOC 2017 TWIN SCREW EXTRUDER WEBER Type : DS 1327 YOC 2017 DIE NORDSON YOC 2017 CALANDER OMIPA Serial 09.38A24 YOC 2017 ROLL PLANA OMIPA Serial 09.38A24 YOC 2017 THICKNESS & DENSITY MEASUREMENT SEREL Serial 4031 YOC 2019 AIR BLOWERS & COOLING CHAPEL OMIPA Serial 22.10A88 YOC 2017 PULL ROLERS AND EDGERS OMIPA Serial 11.35A19 YOC 2017 2 BREAKERS TRIA YOC 2017 GUILLOTINE OMIPA Serial 16.30A19 TRANSPORTATION BELT OMIPA Serial 17.02A49 Djdpfxoz Dt Spe Ab Ajcp YOC 2017 10x TRANSPORTATION BELT BIELE WEIGHING BELT BIELE STACKER / ROBOT FANUC Serial E16Y3413 Type A05B-2612-B081 YOC 2016 Load 140 kg 2 SIDE SANDER COSTA Serial LB643001A Type KK9CCCC2200 YOC 2017 PORTAL STACKER BIELE Serial A6213-24 YOC 2017 LASERPRINTER MASCA ID TECHNICAL DETAILS Width : 2000 mm Extruder output : 1250 kg / hr ( possibly 1400 kg / hr ) Raw material PVC Raw material supply is a mixture of powders, ground recycled, micronised recycled Output is PVC plates size 2000 x 1390 x 3,75 mm Elecricity consumption : 41 000 KWH for 5 days production incl startup and stop of the line incl sander and extraction

Year of construction: 2001, condition: good (used), Paris/CATECH side board edger. Year of production 2001 Capacity: about 30 boards/min. Dodpfsrtn Nzex Ab Aecp In 2021 the machine underwent a major modernization, including replacement of servo valves, new control and measurement by MADREW. A new plank measuring system was rebuilt based on existing measuring sensors. The machine was dismantled in March 2024 due to replacement with a new more efficient edger manufactured by MADREW The range includes: board separator, measuring feeder, edger, distribution conveyor, electrical and control cabinets, hydraulic power unit.

Condition: excellent (used), Endoline Carton Erector Model 221 With bottom taper Serial number: 051235542 Dedpfsv Tywwsx Ab Ascp 415 V, 3 Ph, 50 Hz Dimensions carton erector: 1850 mm x 1850 mm x 2150 mm Including outfeed roller conveyor, roller width: 400 mm Dimensions roller conveyor: 1750 mm x 800 mm x 550 mm.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: 101210/001, For sale is a VISCOM Inline-AOI S3088-III, manufactured in May 2011, serial number 101210. The system is no longer in its original technical condition from 2011. At the end of 2022, it underwent a comprehensive modernization and maintenance by a VISCOM service technician. Approximately €29,000 was invested in the modernization, including hardware, software, and service. Condition: Used, functional. Technical specifications: - Manufacturer: VISCOM AG - Model: S3088-III - Year of manufacture: 05/2011 - Serial number: 101210 - VISCOM upgrade to VEG 101 - VISCOM conversion kit RK.C.0119 - Software: vVision - System is recognized as S3088 Flex on the software side - 8M-CBW4 (4SR) Combi camera module, White Left - 4 orthogonal cameras + 4 cameras for oblique view - VISCOM Type 126.209.B.47e - vVerify - VISCOM 2D libraries - ePM interface, dongle-based, for test program creation based on Gerber data and component/part data - Import of pad geometries for post-reflow test program creation - Multilingual user interface, including German, English, French, Italian, Spanish, Portuguese, Czech, Polish, Hungarian, Romanian, Russian, Swedish, and Chinese New system computer: Djdpezuw R Hjfx Ab Ascp As part of the modernization, a new system computer was installed: Intel Core i7-11700K 32 GB RAM Windows 10 Enterprise Additionally, a new 24" touchscreen monitor from Fujitsu was installed. The following work was carried out, among other things: - VEG-101 upgrade - Installation of the new system computer - Data transfer from the previous to the new system computer - Switch to vVision - M3 annual maintenance - Cleaning of the sensors - General cleaning of the system The work performed is documented in the available VISCOM service reports and invoices. The scope of supply includes, among other things: - VISCOM calibration case - Calibration plates - UPS system - UPS equipped with a new RBC123 battery in August 2026 - Operating manual - Transportation manual - VISCOM service reports - Invoices for the work performed - VISCOM training materials - vVision user training materials Special feature of the machine This system is not simply an older S3088-III in its original condition. The machine has undergone extensive technical modernization and has been equipped with a new system computer, a more up-to-date VISCOM operating environment vVision, and the VEG-101 platform. The investment of approximately €29,000 in modernization, hardware, software, and VISCOM service is accordingly documented. The system is particularly suitable for companies that are looking for a VISCOM inline-AOI with extensive features and completed modernization and prefer a used system over a new machine.

Year of construction: 2018, condition: excellent (used), Type: Low Voltage Distribution Board / MCCB Panel Installed equipment 1 × Schneider Electric Compact NSX400NA main incomer Main incomer rating: 400 A 3-pole configuration 4 × Schneider Electric Compact NSX160F outgoing MCCBs 4 × Schneider TM125D thermal-magnetic trip units Dcsdpfozlii Nox Ab Ajp Outgoing MCCB rating: 125 A each Breaking capacity: approximately 36 kA at 415 V 1 × additional Schneider / Merlin Gerin outgoing device rated 125 A 1 × additional Schneider / Merlin Gerin outgoing device rated 63 A Three-phase L1/L2/L3 distribution Internal busbar system Labelled outgoing circuits Spare internal capacity / blanked positions Heavy-duty floor-standing steel enclosure Lockable double front doors The board appears complete and is in good visual condition. Operational testing and final electrical inspection should be carried out by the purchaser before installation. Available for inspection. Additional photographs and technical information can be provided.

Year of construction: 2008, condition: defective spare-parts repository (used), functionality: unexamined, power: 5 kW (6.80 HP), number of previous owners: 1, noise level: 69 dB, machine/vehicle number: 070523, Current operating hours of the tube: unknown Maximum PCB width: 450 mm x 400 mm Inline X-ray imaging + AOI Dodpfx Aozhwvpob Ajcp History from the previous owner is available We acquired the machine as "functional," but it was likely used as a source of spare parts by the previous owner. Therefore, it cannot be guaranteed that all components are present. We have never put the machine into operation and cannot provide any information about its condition during operation. You are welcome to inspect the machine in 72108 Rottenburg and form your own opinion. Since we are selling the machine as defective/in need of repair, the goods are sold with the exclusion of any warranty and any liability for defects.

Condition: used, Year of construction: 2018, Technical specifications Dcedpfx Abe Agf Efs Aep Bareboard loader with buffer function Manufacturer: ASYS Model: LLB 01 Year of manufacture: 2018 PCB dimensions: min. 70x80mm - max. 250x330mm PCB thickness: 0.8 - 4.0mm Buffer capacity: 5 PCBs Automatic width adjustment Separately driven conveyor belts SMEMA interface Complete documentation Condition: Used, functional

Condition: used, Year of construction: 2024, functionality: fully functional, Corrugated line 5 ply. Fully renewd 2024, 1650mm width. Steam matic, boiler steam producing 2500 kg/h. Max pressure 19 bar. Speed up to 70 metr per min. 1.⁠ ⁠Total Length: 55 metr 2.⁠ ⁠Total Power: 150 kw 3.⁠ ⁠Frame with shaft Djdpsw R Sknsfx Ab Aocp 4.⁠ ⁠Corrugated paperboard marching: diameter of corrugated rouer, electric adjust speed moter used. 5.⁠ ⁠Double cylinder gum mounting marchine: On the adoption, inside two layers draw the gun, dascend to carry the paper lead the paper roller. Machine exists units: Hydraulic shaftless mill roll stands, Spindle ¢ 240mm, hyperbolic heavy rocker, expand chuck , multi-point brake, hydraulic drive lifting, panning left and right on the middle. Top paper preheat cylinders and core paper preheat cylinders. Both preheat 360 degress area. Single Facer Double Facer Blade scorer NC helical knife Glue system Gas system Steam system producing 2500 kg/h. Max pressure 19 bar. Working 12 bar. Top paper index 100g/㎡--180g/㎡ Ring crush index（N.m/g）≥8 (Water containing8-10%) Core paper index 80g/㎡--160g/㎡ Ring crush index（N.m/g）≥5.5 (Water containing8-10%) In paper index 90g/㎡--160g/㎡ Ring crush index（N.m/g）≥6 (Water containing8-10%)

Condition: used, Year of construction: 2017, functionality: fully functional, We offer this used Weinig Automatic Stacker, model Deck Stacker, manufactured in 2017. Video of the machine in operation is available. Manufacturer: Weinig Model: Automatic Stacker Year of manufacture: 2017 Condition: Used Category ID: 164 Type ID: 2293 Machine type: Deck Stacker Weinig Stacker – in perfect condition! Weinig is a global leader in the industry. This is not a budget machine; it is a premium-class machine that retains its value and operates reliably for years. Djdpfjz N H Tfox Ab Aocp For sale: a compact Weinig deck stacker in very good condition. It is entirely in its original paint, unmodified, and well-maintained. Key features: • Stacking length range: from 40 cm to 1.5 m • 4-5 layers per minute • Capability for herringbone stacking • Storage for spacers • Quick and easy adjustment of stacking dimensions • Additional milling wheel – can be mounted to push material off the line and onto a conveyor belt • The machine is in continuous working order Opportunity to view and inspect the machine in operation. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, We are offering this refurbished SBL 1050 SE automatic feeder, manufactured in 2006. The chain was completely renewed in 2026 and is in very good condition. The breakout station has been converted to a centerline configuration and equipped with a quick-release frame. Dedpjz Sx Efjfx Ab Ascp Manufacturer: SBL Model: 1050 SE Year of manufacture: 2006 Condition: Refurbished Category ID: 532 Type ID: 1576 Machine type: Automatic feeder Minimum format: 350x400mm Maximum format: 750x1050mm Maximum speed: 7500 sheets/hour If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, This listing is for a Thermo Fisher 12-4906-56 Mother Board (G) for Phadia 250 Circuit Board The unit is in full working condition and ready for immediate use This circuit board is a high-quality lab instrument component manufactured by Thermo Fisher Scientific (Model: 12-4906-56). This is a genuine OEM replacement Mother Board (G) designed specifically for the Phadia 250 allergy and autoimmune testing system. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. specifications_en: Part Name: Mother Board (G), P250; Part Number: 12-4906-56; Lot: KWR3; Origin: Made in Japan Dcodpfx Abj Agpwce Aop

Condition: used, Year of construction: 2021, functionality: fully functional, power: 90 kW (122.37 HP), cutting height (max.): 165 mm, cutting width (max.): 1,350 mm, BOARD EDGER AND MULTI RIP SAW VR 1300 S with servo controlled blade positioning • Production year: 2021 Dcjdpfxjz D S Dds Ab Aop • Main motor: 90 kW • Max. board width: 1350 mm • Max. cutting height: 165 mm • Servo-controlled fast blade positioning • 4 movable saw units with lasers • 3 fixed laser guides • 10" touchscreen control with MEBOR software • Additional 500 mm multi rip saw head with spacers Machine is sold with infeed conveyor. Outfeed conveyor is not included.

Condition: excellent (used), color: black, Year of manufacture: September 2023 Design year: 2023 Dimensions (L x W): 650 x 250 cm CE marking: yes Technical condition: very good Optical condition: very good VAT/differential taxation: VAT deductible FLATBED CONTAINER / PALLET CONTAINER – HOOK LIFT & CABLE ROLLER SYSTEM VERY STRONG AND ROBUST DESIGN – YEAR OF MANUFACTURE 2023 Very clean and heavy-duty flatbed container / pallet container, specially designed for professional and intensive use. Equipped with aluminum side panels, practical rear doors, and a particularly robust steel diamond plate floor. Thanks to the combination of hook lift coupling and cable roller system coupling, this container can be used in a variety of ways and is suitable for different vehicles and interchangeable systems. A very strong, clean, and robust flatbed, ideal for the transport of pallets, building materials, machines, steel, equipment, and other heavy goods. GENERAL Type: Flatbed container / Pallet container Year of manufacture: 2023 Design: Heavy Duty Condition: Very clean and well-maintained Construction: Particularly robust and stable design INTERNAL DIMENSIONS Internal length: 648 cm Internal width: 246 cm The generous internal dimensions allow for optimal use of the loading area and make the container particularly suitable for pallets as well as long and bulky goods. DESIGN & EQUIPMENT - Very stable heavy-duty construction - Aluminum side panels - Rear doors - Very robust steel diamond plate floor - Several lashing points for secure load securing - Practical storage space for chains and lashing material - Hook lift coupling / hook lift system - Coupling for cable roller system - Suitable for various hook lift and cable roller systems - Robust steel main structure - Designed for daily professional heavy-duty use - Versatile and flexible Dsdpfx Aoz Hbkxeb Aocp - Very practical design for transport, construction, and logistics applications POSSIBLE APPLICATIONS Ideally suited for the transport of: Pallets – Building materials – Machines – Steel – Equipment – Paving stones – Construction equipment – heavy and bulky goods. VERY STRONG – ROBUST – CLEAN – MULTIFUNCTIONAL A particularly versatile flatbed/pallet container from the year 2023 with a stable steel structure, aluminum side panels, rear doors, and a solid diamond plate floor. Thanks to the hook lift and cable roller system coupling, it can be used flexibly on different vehicles. Very robust and professional design – ready for immediate use!

Condition: used, Pappschere - Board Cutter Wilhelm Leo'S Nachfolger 19030 Serial-No. WLNS Dodpfx Ao Ahzwgeb Aocp Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Pappschere - Board Cutter Krause blau Dcedpfs Ahzx Ejx Ab Asp Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, DIVISIO 3100 - Inline - Returned from leasing due to factory closure! New price in 2024: €149,000.00 net! 42,680 circuit boards have been milled. - Milling cutter diameter control - DIVISIO wear parts package - Automatic transport width adjustment - SMEMA transport height - Separation module for shank milling cutter, 500W - Camera hardware module - Camera teach function software module - Fiducial mark recognition software module - 8-position tool changer extension - Manual extraction hose - Suction power monitoring - ASYCAM CAD data conversion - A Adrep - Offset main switch - ESD energy chains and P-hoses, standard - Packaging size, Group 3 pallet Dedpjzpytaofx Ab Aocp The dismantling order will only be placed after payment has been received. After that, the machine will have the packaging dimensions as specified by the manufacturer, approximately: No guarantee or warranty approx. 1850 kg and 125x200x190 cm, pallet • The height and weight of the asset must be taken into account when selecting the transport vehicle. • A forklift is available for loading. • If the asset is not collected on time, a storage fee of €20.00 per lot and day (or part thereof) will be charged. This fee must be paid before collection. • The sale is made with the exclusion of any guarantee or warranty. • The specifications are technical data from the original offer. • No liability is accepted for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.

Condition: used, Board feeding system Jacksteel Dcjdsz Syifepfx Ab Aop Year of construction: 2018 JackSteel board feeding system for transporting boards/blocks out of the saw, separating the blocks one by one and then feeding them into the centre for re-sawing. Below the line is a chain conveyor for the collection of chips and waste. The line operates at speeds of up to 90 m/min.

Condition: new, functionality: fully functional, Endress + Hauser Proline T-Mass 651-30AB1AD1AAABCA Thermal Mass Flow Meter 6 pieces available Dedpfx Absznw Hzo Aocp Brand new, unused, ex stores stock. Sold as seen.