Used Corrugated for sale (246)

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Technical specifications • Sheet width: 1700 mm • Maximum sheet dimensions (X/Y): 1700 mm / 4000 mm • Minimum sheet dimensions (X/Y): 300 mm / 600 mm • Cardboard thickness: from 2 mm to 8 mm • Single production run: 200–600 units/hour • Maximum multi-unit production capacity: up to 2000 units per hour • Machine weight: approximately 4500 kg • Machine dimensions (X/Y/Z): approximately 5500 mm / 4000 mm / 1900 mm Csdpsz A Tfgjfx Acrehd

Condition: used, Year of construction: 2024, functionality: fully functional, Corrugated line 5 ply. Fully renewd 2024, 1650mm width. Steam matic, boiler steam producing 2500 kg/h. Max pressure 19 bar. Speed up to 70 metr per min. 1.⁠ ⁠Total Length: 55 metr 2.⁠ ⁠Total Power: 150 kw 3.⁠ ⁠Frame with shaft 4.⁠ ⁠Corrugated paperboard marching: diameter of corrugated rouer, electric adjust speed moter used. Codpfsw R Sknjx Acrohd 5.⁠ ⁠Double cylinder gum mounting marchine: On the adoption, inside two layers draw the gun, dascend to carry the paper lead the paper roller. Machine exists units: Hydraulic shaftless mill roll stands, Spindle ¢ 240mm, hyperbolic heavy rocker, expand chuck , multi-point brake, hydraulic drive lifting, panning left and right on the middle. Top paper preheat cylinders and core paper preheat cylinders. Both preheat 360 degress area. Single Facer Double Facer Blade scorer NC helical knife Glue system Gas system Steam system producing 2500 kg/h. Max pressure 19 bar. Working 12 bar. Top paper index 100g/㎡--180g/㎡ Ring crush index（N.m/g）≥8 (Water containing8-10%) Core paper index 80g/㎡--160g/㎡ Ring crush index（N.m/g）≥5.5 (Water containing8-10%) In paper index 90g/㎡--160g/㎡ Ring crush index（N.m/g）≥6 (Water containing8-10%)

Condition: excellent (used), Year of construction: 2021, type of input current: three-phase, input voltage: 400 V, overall weight: 600 kg, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a ZECHINI Symphony 3 machine for creasing cardboard with a thickness of 1.5 mm to 4 mm, equipped with V-profile blades (120° angle). The machine allows for creasing in up to four different points without creating dust, and also enables kiss-cutting of the cardboard. The machine is used in the production of both rigid covers and boxes; it also allows for trimming the corners of the sheet. Chedpfx Acj Aaynpjrsd The machine has been used very little. It is possible to purchase additional V-profile blades (90° angle) and U-profile blades.

Condition: new, Year of construction: 2026, SEM65/28 PVC Corrugated Pipe Extrusion Line Complete Production Line for Flexible Corrugated PVC Pipes Ø10–40 mm The SEM65/28 extrusion line is designed for continuous production of flexible corrugated PVC pipes. The line includes automatic material feeding, drying, extrusion, water-cooled pipe forming, automatic cutting and double-station winding. Equipped with Siemens PLC control and DELTA frequency inverters. Only one operator is required. 1. General Specifications * Model: SEM65/28 * Material: PVC * Capacity: 40–70 kg/h, depending on material * Pipe Diameters: Ø10, 16, 20, 25, 32, 40 mm * Wall Thickness: 1–2 mm * Production Speed: 5–30 m/min * Total Installed Power: 50 kW * Actual Power Consumption: Approx. 70–80% * Power Supply: 380 V, 3-phase, 50 Hz * Operating Direction: Right to left * Operators: 1 * Color: Grey * Installation Space: 11 × 2.5 × 3 m * Operating Temperature: +5°C to +40°C * Maximum Humidity: 85% 2. Equipment Included 1. ZJ300 Vacuum Auto Loader – 1 unit 2. STG-U100 Hopper Dryer – 1 unit Csdpfx Acoz Nkpwsrehd 3. SEM65/28 Single-Screw Extruder – 1 set 4. Extrusion Die Head with Interchangeable Tooling – 1 set 5. Corrugated Pipe Forming Mold Blocks – 3 sets Ø10-40, Ø25-20, Ø16-32 6. High-Speed Corrugator – 1 unit 7. Automatic Double-Station Winder – 1 unit 3. SEM65/28 Single-Screw Extruder * Screw Diameter: 65 mm * L/D Ratio: 28:1 * Screw Speed: 0–40 rpm * Main Motor: 22 kW, asynchronous * Motor Control: DELTA vector inverter * Screw & Barrel: 38CrMoAlA, nitrided * Heating Zones: 4 * Heating Power: 3.2 kW × 4 * Heaters: Ceramic * Cooling Fans: 4 × 0.18 kW * Feed Throat Cooling: Water * Gearbox: SJF-173 * Gearbox Lubrication: Forced * Gear Material: 20CrMnTi steel * Capacity: 40–70 kg/h * Control: PLC 4. High-Speed Corrugated Pipe Forming Machine Water-cooled corrugator with an enlarged cooling area for efficient pipe forming. * Main Drive: 4 kW induction motor * Speed Control: DELTA inverter * Forming Plate Hardness: 63.4 HRC * Cooling: Water * Vertical Adjustment: Electric * Horizontal Adjustment: Manual * Adjustment Motor: 1.1 kW * Platform Travel: 800 mm * Forming Method: Pneumatic blow forming * Vacuum Pump: 4 kW Automatic Cutting System * Pneumatic inline cutter * Adjustable cutting length * PLC control 5. Automatic Double-Station Winder * Type: Double-station * Drive: 12 N·m torque motor * Speed Control: Automatic synchronization * Traverse: Spindle speed tracking, frequency-controlled * Station Switching: Pneumatic self-locking * Air Pressure: 0.6–1 MPa 7. Wire device * Device for pulling a steel wire through corrugated PVC pipes during production, allowing easier cable installation 8. Applications Production of flexible PVC corrugated pipes for electrical cable protection, cable management, industrial installations and general-purpose conduit applications.

Condition: used, Machine type: Corrugated sheet profiling line – new CHIEF PHENIX type Main components: - Coil lifting arm – 10-ton capacity - Decoiler – 10-ton capacity - Straightener – Dimeco Chedpfsw Dd Hpex Acrsd - Feeder – Dimeco Microfeeder - Hydraulic punching press – SCMB 650 tons - Post-press feeder – Heilbronn - Roller conveyors - Rollforming line – 1000 mm, corrugated profile, CHIEF PHENIX new type Machine Application Automated production line for converting metal coils into corrugated sheets, including straightening, high-force hydraulic punching, continuous feeding, and rollforming. Suitable for structural and cladding applications. Key Features / Differences Modern system with high-performance units: 650-ton SCMB hydraulic press for precise punching, Dimeco straightener and Microfeeder for high throughput. 1000 mm rollforming line configured for optimized CHIEF PHENIX corrugated profile.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,500 h, LICHTER LRK 200, three-layer pipe head for PVC pipes, also suitable for PE and PP three-layer pipes. Last application: PP three-layer corrugated pipes. Pipe diameter max. 200 mm. Pipe diameter min. 60 mm. MATERIAL: Made of stainless steel. Codpfj Ah Suqex Acrshd Year of manufacture: approx. 2018. Operating hours: approx. 3500 h. Condition: Very good, operational. Location: Sachal EXTRUSION MACHINES, D-26345 Bockhorn-Grabstede.

Year of construction: 2001, operating hours: 27,400 h, condition: good (used), functionality: fully functional, Die-cutting machine with stripping station, electronic double sheet detection, registration mark BS + AS, machine height adjustment 300 mm, 1 die-cutting frame, 2 stripping frames and 1 set of stripping pins, quick centering device for sheet stack, manual non-stop system at the feeder, manual non-stop system at the delivery, price includes loading onto a truck (no container loading or sea freight packaging included!) In May 2026, a PLATEN CONDITIONING was performed by BOBST on the machine; all deposits were removed from the upper and lower platen, and the cylinder was polished. The sector was opened and assessed as being in "as new" condition. Photos, video, or invoice available upon request! Attention: The platform must be adapted by the buyer! Longitudinal handrail is missing! Chjdezmyfdspfx Acrod Technical main data: Maximum sheet format: 720 × 1020 mm, Minimum sheet format: 350 × 400 mm, Maximum die-cutting force: 250 tons (2.5 MN), Maximum production speed: 7,500 sheets per hour, Processable materials: Paper / solid board: from 80 g/m² to 2000 g/m², corrugated board: up to 4.0 mm thick Dimensions and weight: Machine length: approx. 6,000 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Total weight: approx. 19,500 kg Equipment features of the series II: C.U.B.E. system: Electronic Bobst machine control system Centerline system: Micrometric adjustment for fast setup times and precise tool alignment Stripping station: Integrated double-round stripping unit for waste removal Non-stop system: Continuous sheet feeding and delivery Ultrasonic double sheet detection Attention: In addition to the machine, the following can be purchased separately for an extra charge: - Foundation/die-cutting frame turning table (third-party manufacturer) (see photo) - Die-cutting frame (see photo) - Honeycomb foundation - Turning table/preparation table, waste stripper (see photo) - Extra stripping frames and stripping tools (see photo)

Year of construction: 1995, condition: good (used), functionality: fully functional, Automatic sheeting machine for joining single-face/corrugated cardboard sheets, complete with delivery system featuring a sheet turner and palletizer. Maximum sheet size: 1400x1600. Cjdpez Ibmijfx Acrohd Machine dimensions: - Length: 16630mm - Width: 4330mm - Height: 3350mm

Condition: used, Year of construction: 1997, Format: 1300 x 920 mm Equipment: Maximum die-cutting size with front waste: 1,300 x 905 mm Maximum die-cutting size without front waste: 1,300 x 915 mm Maximum embossing size: 1,300 x 900 mm Paper: approximately 80???90 g/qm2 and above Solid board: up to approximately 2,000 g/qm2 Corrugated board: up to approximately 4 mm Equipment: Operating platform Machine raised by approximately 650 mm Removable platform section at the feeder Recently installed asynchronous main motor Manual non-stop feeder pallet Pile table with manual lateral correction during production Adjustable suction unit Chodpfx Acsz Hnayerjd Automatic feeder-head adjustment Double-sheet detection Sheet down-holder for guiding sheets to the front lays Upper frame with manual lifting device Upper transport equipment for paper and cardboard Die-cutting, pressing/creasing and embossing, separately or simultaneously Oil conditioner for maintaining the correct operating temperature Automatic removal of internal and marginal waste Condition and availability

Year of construction: 2010, condition: used, Agnati Master glue unit for corrugator with Vary Bond glue system Cedpfxez Ekd Sj Acrehd Working width 2500

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, cutting width (max.): 1,270 mm, cutting length (max.): 1,680 mm, Equipment: documentation/manual, Professional Kongsberg X20 cutting and creasing plotter. This device is extremely versatile and efficient, designed for the production of packaging, POS materials, and the processing of rigid and flexible materials. The machine combines Scandinavian reliability, precision, and flexibility, allowing for quick adaptation to diverse jobs. The unit we have was purchased from a Dutch printing company and was used in the prototyping department. Maximum cutting speed: 30 m/min Acceleration: 3 m/s² Material clamping system: multi-zone vacuum table with a powerful 6 kW vacuum pump, guaranteeing a perfectly flat arrangement even for the most demanding materials. Positioning camera: integrated vision system for reading markers (matching print to cut). The machine is equipped with: - a FlexiHead, which allows for the simultaneous mounting and use of three tools in a single work cycle, without the need for constant replacement. - two drag knives: - psaligraphy knife for precise cutting of films and papers - currospeed knife for cutting thick materials, solid and corrugated cardboard - creasing wheels: a set of creasing wheels with a diameter of 26.0mm and different geometries (2pt; 3pt; 4pt), enabling perfect bending of cardboard and carton without fiber cracking. Codpfx Ajz Egikecrohd The price of the machine includes a computer with a dedicated control system and i-cut Production Console software, compatible with Artios CAD. The software primarily imports files in pdf, acm, dfx, and ADR formats. The machine is in continuous operation and is regularly serviced by an authorized partner (the last service was performed in January 2026). It is possible to perform tests on customer materials before purchase.

Year of construction: 1995, condition: like new (used), * Automatic flatbed die cutter * Very good condition. Cldsvexqcy * Possible to see in production. * Max size 1100x1600 Csdpokyt U Tofx Acrshd

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 930135, color channels: 8 couleurs + blanc, year of last overhaul: 2026, Equipment: documentation/manual, We are selling an industrial printer in very good condition. The machine is covered by a service contract and is properly maintained. We primarily use this printer for printing banners, vinyl, paper, and, of course, all rigid materials such as Forex, Dibond, corrugated board, etc. We can operate the printer in 4-color mode (fast mode) or using 8 colors for high-quality prints. Chsdpfxjz R Tuyo Acred The printer is located in Belgium and is available for a demonstration at any time.

Condition: used, Year of construction: 2018, machine/vehicle number: 10619-1, MEYPACK VP 451 tray and wrap-around packaging machine Fully automatic machine for packing beverage cans into trays and wrap-around cartons. Products and formats: - 0.33-litre cans, Ø 66 x 115 mm, loose and in four-packs - 0.5-litre cans, Ø 66 x 168 mm, loose and in four-packs Pack configurations for both can formats: - 4 x 6 loose cans in a wrap-around carton or tray - 3 x 4 loose cans in a wrap-around carton - 2 x 3 four-packs in a tray Output: - Nominal output: 16,000 cans/h - Packaging output: 12 or 24 packs/min, including a 5% capacity reserve Product handling: - Multi-lane bulk product infeed - Four-packs fed transversely on two lanes, with the openings facing sideways - Infeed height: approx. 1,150 mm ± 50 mm - Outfeed height: approx. 650 mm ± 50 mm - Trays and wrap-around cartons leave the machine broad side leading Operating principle: The products are fed continuously in multiple rows, distributed evenly into the lanes of the infeed conveyor using the accumulation principle, and grouped into the required formation. At the same time, a flat tray or wrap-around blank is removed from the magazine and positioned below the grouping station. The servo-driven lowering station receives the product formation and blank and folds the blank tightly around the products. A servo-driven indexing chain then conveys the pre-folded pack through the gluing and compression stations. The finished pack is transferred to the downstream conveyor system via a gravity roller conveyor. Grouped-pack size range: - Length: 200–400 mm - Width: 120–300 mm - Height: 80–200 mm - Tray height: 40–200 mm Packaging material and magazine: - Suitable for almost all commercially available corrugated-board grades; final design subject to approval by MEYPACK - Blank length: 360–1,250 mm - Blank width: 300–700 mm - Magazine capacity: approx. 150 blanks or approx. 400 mm stack height for B-flute board - Flat blanks are separated by vacuum cups and positioned by a belt conveyor - Hot-melt adhesive: commercially available grades approved by the adhesive-unit manufacturer; final design subject to approval by MEYPACK Utilities: - Electrical supply: 3 x 400 V AC, 50 Hz, with neutral and protective conductor; permissible long-term voltage fluctuation ± 5% - Control voltage: 24 V DC - Compressed air: 6 bar, 1/2-inch connection; clean and free from foreign matter, gases and oils Operation and format change: - The machine can be monitored by one operator while performing another task - Operator side can be arranged on the right or left when viewed in the outfeed direction - Fast, repeatable format changes through zero-line design and automatic indexing-chain adjustment - Settings documented in product-specific format lists; clearly assigned and marked change parts Basic machine and components: - Weight: approx. 3,500 kg - Finish: black grey RAL 7021 - Pneumatics: Festo - Hot-melt unit: Nordson Pro Blue - Drives: SEW, protection class IP55 - Control system: Siemens S7 - Operator interface: Siemens Touch Panel TP 1500 - Electrical design in accordance with MEYPACK standard electrical equipment specification E 2017 Included options: - Additional tray takeaway conveyor for manual palletising - Painted-steel roller conveyor with integrated corner transfer, nominal width 350 mm, length approx. 1,100 mm - Two-lane transfer unit with modular belt chain, adjustable side guides on one side and stainless-steel cable duct - Broadband VPN router for remote machine maintenance - Swivel arm for Chsdpfx Aj Ahk Uyjcrod

Year of construction: 2012, condition: used, Palletizer Para P030 Chjdpez I Tu Esfx Acrsd

Condition: used, Format: 360 cm Equipment: Codpfxoyf Ih Sj Acrehd Automatic cutting, slotting, and creasing

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Codpszt Nbzofx Acrshd Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: SG1CH1S001, number of ink cartridges: 9, color channels: 7, number of print heads: 8, resolution (max.): 1,200 dpi, total length: 3,640 mm, total width: 4,210 mm, total height: 1,750 mm, counter reading (color): 124,000, year of last overhaul: 2025, type of input current: three-phase, input current: 32 A, input voltage: 380 V, Equipment: raster image processor, HP Latex R1000 Hybrid Printer We are offering for sale an HP Latex R1000 hybrid printer, which combines revolutionary latex print quality with the ability to print on both rigid and flexible media. The machine is in very good technical condition, has been regularly maintained, and is ready for immediate operation. Key Specifications: Manufactured: December 2021 Print Counter: 124,000 sqm Technology: HP Latex (featuring the whitest white ink on the market that does not yellow) Configuration: Hybrid solution (rigid boards and roll-to-roll) Condition: Very good, fully functional, operated in a clean environment Main Advantages: Versatility: Prints on everything from PVC sheets, dibond, and acrylic to self-adhesive vinyls, banners, textiles, and corrugated cardboard. Chsdpfx Acez Nc Scered Quality & Eco-friendliness: Water-based latex inks are odorless, certified for indoor applications (schools, hospitals, children's toys), and highly scratch-resistant with photorealistic print quality. Service History: Maintained under full service by the official distributor (HSW) throughout its operation. Package Includes: HP Latex R1000 printer Roll-to-roll printing accessories, rigid board loading/unload tables, and RIP software The machine has been out of active production since March 2025, but it is maintained in an operational state with regular startups and cleaning.

Year of construction: 2008, condition: ready for operation (used), A packaging cutting and creasing machine for Solarco corrugated board is available. Sheet width: 1700mm, max. sheet dimensions X/Y: 1700mm/4000mm, min. sheet dimensions X/Y: 300mm/600mm, single production output: 200-600 pieces/h, max. multiple production output: 2000 pieces/h, cardboard thickness range: 2mm-8mm, machine dimensions X/Y/Z: approx. 5500mm/4000mm/1900mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible. Codpfjwgc Ahox Acrjhd

Condition: used, Year of construction: 2005, functionality: fully functional, working width: 1,550 mm, type of input current: three-phase, input voltage: 400 V, We offer a rotary die-cutting machine, HMB Rotary Die-Cutter 1.5, which has seen little use, manufactured in 2005. For sale, we have a fully functional, Polish-made rotary die-cutting machine for corrugated cardboard. This machine is made by the renowned manufacturer HMB Mikołów, model 1.55. The machine is designed for the fast and precise cutting of shaped, flap, and grid-patterned packaging, as well as dividers, from corrugated cardboard using rotary dies. Chjdpfjz Iwp Hex Acred Technical specifications: • Manufacturer: HMB Zakład Mechaniczny Mikołów • Type / Model: ROTARY DIE-CUTTER 1.55 • Year of manufacture: 2005 • Working width: 1550 mm (1.55 m) • Certificate: CE • Power supply: 400 V Equipment and advantages: • Cleaning section (brush): Integrated shafts with brushes effectively remove cardboard waste immediately after die-cutting. • Take-off table: Includes the grid-patterned table shown in the pictures for collecting the finished cut sheets. • Polish design: Very durable construction, simple adjustment, and easy access to spare parts from the manufacturer in Mikołów. If you have any questions or require additional information, please send a message or contact us by phone.

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: PET09622A, Automatic winding and packaging machine for flexible spiral hoses, pipes, corrugated hoses, and hoses with an outer diameter of 8 mm to 40 mm. After winding, the coil is wrapped with stretch film and, if necessary, automatically labeled by the label printer. The total of six loading units are loaded with hose sections and wound up one after the other. The package includes a wide range of spare parts. These include: Omron servo axle drives, trailing cables for drives and valve terminals, various pneumatic components, drive belts, sensors, etc. Capacity: 60 coils/hour Min. inner diameter of coil: 200 mm Max. inner diameter of coil: 380 mm Max. outer diameter of coil: 850 mm Min. width of coil: 120 mm Max. width of coil: 340 mm Chsdjwd Emwopfx Acrsd The technical data sheet can be found below the images; the operating instructions are attached.

Condition: excellent (used), Year of construction: 2024, operating hours: 992 h, functionality: fully functional, machine/vehicle number: 20240250, overall weight: 6,000 kg, For sale: BOXMATIC Manual 25 DCFM-D – a semi-automatic machine for producing regular corrugated cardboard folding boxes with cutting capabilities. It is an ideal solution for companies requiring flexible production of corrugated cardboard boxes with frequent order changes. The BOXMATIC Manual 25 model is designed for the professional and efficient production of basic types of folding boxes, with the option of additional die-cutting (e.g., cutting hand holes, cross boxes), particularly FEFCO 02 and FEFCO 03 types made from single, double, or triple-wall corrugated cardboard. The machine can also produce dividers or simply score and cut the cardboard. The machine performs excellently in short and medium runs (10–5000 units), offering quick changeovers and a wide range of produced formats and FEFCO box types. Chedoy Tv N Ijpfx Acrjd Key advantages: - Cardboard handling: single, double, and triple-wall (2–12 mm) - Max. sheet width: 2500 mm - Output: 300–600 units/hour, up to 2300 units/hour in multi-product mode - Quick setup and production change (approx. 5–10 minutes) - Wide range of FEFCO box types - Flexographic printing and additional die-cutting options - Ideal for producing large formats - Excellent value for money Technical specifications: - Weight: approx. 6000 kg - Length: 3070 mm - Width: 2820 mm - Height: 1710 mm - Power supply: 400 V / 50 Hz - Power: 19 kW

Condition: excellent (used), * Massenzana reelstand width 2500mm Cedpfxsz Sni Uo Acrehd * Very good condition

Year of construction: 2016, operating hours: 20 h, condition: used, functionality: fully functional, machine/vehicle number: MT-108/2016, We are offering a used IPVET EPS/MW Custom Sandwich Panel Production Line, manufactured in 2016. The machine has seen very little use. Manufacturer: IPVET Model: EPS/MW Custom Sandwich Panel Year of Manufacture: 2015 Condition: Used Category ID: 1059 Type: EPS/MW Sandwich Panel Production Line The EPS/MW (Expanded Polystyrene/Mineral Wool) sandwich panel production line is suitable for the manufacture, staging, and packaging of assorted types and sizes of sandwich panels with insulation. The line includes all necessary electrical circuits, hydraulic system, and control units required for operation. The production line is capable of manufacturing the following products: - EPS roof panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - EPS wall panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - MW roof panels with insulating thicknesses: 80mm, 100mm, 120mm - MW wall panels with insulating thicknesses: 80mm, 100mm, 120mm Raw materials used in production: - 0.4-0.7mm x 1250mm pre-painted, galvanized steel sheet - EPS 80 Expanded Polystyrene boards - MW Mineral Wool (Spanrock XL) - Adhesive (polyol) - Adhesive (isocyanate) Machine Units/Equipment included in the Sandwich Panel Production Line: The EPS/MW sandwich panel production line is a comprehensive system consisting of several machines and equipment. The production line comprises the following units: 2.1. Decoiler for external steel sheet with trolley 2.2. Trapezoidal roller conveyor Bobp Ergeyw Tmlocyodf 2.3. Shearing knife for cutting steel sheet 2.4. Micro-corrugation roller conveyor 2.5. Edge-forming roller conveyor for standard joint outer facing 2.6. Edge-forming roller conveyor for concealed joint outer facing 2.7. Decoiler for internal steel sheet with trolley 2.8. Shearing knife for cutting steel sheet 2.9. Micro-corrugation roller conveyor Csdpfx Acsyw Tmljrshd 2.10. Edge-forming roller conveyor for internal facing 2.11. EPS/MW insulation dispenser unit 2.12. Insulation material conveyor belt 2.13. EPS/MW insulation trimming knives 2.14. Adhesive application unit 2.15. Pump 2.16. Adhesive spreading unit 2.17. Laminating roller conveyor 2.18. Cutting saw 2.19. Accordion roller conveyor 2.20. Roller discharge table 2.21. Stacking and flipping unit 2.22. Transport trolley for stacking 2.23. Packaging unit 2.24. Chain conveyor unit for material handling If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2017, machine/vehicle number: 0-303-21-0734, functionality: fully functional, operating hours: 19,436 h, input voltage: 400 V, input current: 7 A, input frequency: 50 Hz, type of input current: three-phase, total height: 3,000 mm, total length: 14,000 mm, total width: 3,400 mm, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, HOMAG VKS 250 cardboard cutting machine For sale is a HOMAG VKS 250 for the automated production of customized corrugated cardboard packaging. The system is designed for both series production and single-item production and enables cutting, creasing, and perforating in both longitudinal and transverse directions. The machine has been further modernized and expanded and is ideal for companies that want to produce packaging flexibly and according to their specific needs. Technical data / Features: 8 real + 8 virtual longitudinal tools 1 transverse tool automatically adjustable tools Multi-line processing automatic 5-position endless cardboard changing system, 3 of which are side-by-side Codszv S Snspfx Acrjhd intelligent remaining length management Infeed width: 350–2,500 mm Cardboard thickness: 2–7 mm Processing of 1- and 2-ply corrugated cardboard Longitudinal cutting tolerance: max. 0.5 % Transverse cutting tolerance: max. ± 2 mm Working height: 900 mm IntelliCut machine control HOMAG powerTouch multi-touch control panel PLC control and industrial PC automatic production according to production lists Connected load: 4.5 kW Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Space requirement approx. 10,500 × 3,400 × 3,000 mm Weight approx. 2,800 kg Further information on condition, modernization and price available upon request.