Used Notching for sale (359)

Condition: as good as new (ex-display), plate thickness 2.0 mm tube diameter max. 60.0 mm Hedpfjw U U Tyjx Ac Tst motor 400 Volt

Condition: used, Year of construction: 2000, plate thickness 3 mm blade length 225 x 225 mm cutting angle 90 ° throat 110 mm strokes per minute 45 total power requirement 2,5 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1 x 1 x 1,2 m Hedpsxyacpofx Ac Tst

Condition: used, Year of construction: 1970, rechts Ausklink / links S Hodoztf Ahepfx Ac Tet fence elektronisch ja /nein foot pedal mechanisch weight of the machine ca. 1,3 t

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: Gill tool, notching die for profile steel shears, flat steel shears -Dimensions: see photos -Dimensions: Die 240/90/H125 mm / Punch 200/85/H170 mm Hsdpfx Acezr Hlzs Tst -Weight: 33.9 kg

Condition: used, functionality: fully functional, Year of construction: 1993, machine/vehicle number: 398, control type: manual, degree of automation: manual, actuation type: hydraulic, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, input frequency: 50 Hz, type of input current: three-phase, overall weight: 900 kg, cutting length (max.): 150 mm, Equipment: angle stop, foot remote control, Cutting performance (90° notch) - Normal steel: 4.0 mm - Stainless steel: 3.0 mm Cutting angle: 30-120° Cutting length: 150 x 150 mm Working height: 900 mm Table: 1000 x 650 mm Motor power: 3.0 kW Weight approx. 900 kg Dimensions: 1250 x 1000 x 1160 mm (LxWxH) Equipment: - Angle adjustment 30° - 120 ° continuously - 2 digital displays for the adjustable stops * Set-up stroke * Single stroke * Continuous stroke - Plexiglass protection for better transparency - Hardened blades also for cutting stainless steel - Adjustable stroke height setting Hodsvk I Avepfx Ac Tst - Removable cutting container - Freely movable foot switch BOSCHERT angle adjustment: - the one-piece 30° The upper blade is directly connected to both a left and a right lower blade within a tool - for each notch over 30°, the notch is made once to the left and once to the right. - the swivel adjustment is carried out pneumatically immediately after the first notch has been completed. The machine can be demonstrated on site with power on. All information is provided without guarantee. Subject to errors and prior sale.

Condition: used, Notching Machine COMACA type N/EPAS Maxi Sheet thickness: 3 mm Table size: Length 1050 mm x Depth 700 mm Ends tables dimensions: 900 x 470 mm Throat depth: 110 mm Orientable stop Blade length: 225 x 225 mm Voltage: 380 V Total length with ends tables: 2900 mm Length: 1200 mm (with retreated ends tables) Depth: 800 mm Total height: 1100 mm Weight: approx 1 T Hsdezwcmlepfx Ac Tst

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: Punch holder for square notching punch for profile steel shears and flat steel shears -Type: 60/60-21 -Hole spacing: 177/60 mm / Ø15 mm -Dimensions: see photos -Dimensions: 205/95/105 mm Hodpfx Ajznt Tdjc Tst -Weight: 8.2 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: Punch holder for square notching punch for profile steel shears and flat steel shears -Hole spacing: 177/60 mm / Ø15 mm Hedpoznt S Tsfx Ac Tot -Dimensions: see photos -Dimensions: 205/115/105 mm -Weight: 10.3 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Withdrawal device: for square notching dies -Dimensions: see photos -Quantity: 2x pullers, 1x with fine thread -Submission/Price: complete -Dimensions each: 200/140/90 mm Hodpeznk R Tofx Ac Tot -Weight: 2.4 kg/pc.

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: Square notching die for profile steel shears and flat steel shears -Width: 50 mm -Dimensions: see photos -Dimensions: 175/60/H125 mm -Weight: 6.6 kg Hodpjznk Aiefx Ac Tet

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die -Punch tool: Angle notching tool, notching unit -Dimensions: see photos Hsdpjzm Tkgefx Ac Tst -Dimensions: 150/130/H80 mm -Weight: 4.4 kg

Condition: ready for operation (used), Blade length: 130 x 130 mm Cutting length: 130 mm Max. cutting capacity at 45/70 kg strength: 3/2 mm Cutting angle: 90° Stroke rate: 50/min Table dimensions: 460 x 600 mm Space required: 650 x 600 x 1250 mm Weight, approx.: 170 kg Hodpfx Asznh Ivoc Tjt

Year of construction: 1990, condition: ready for operation (used), A hydraulic Euromac notching machine is available. Notching capacity steel/stainless steel: 6mm/5mm, blade length: 220mm, working angle: 90°, angle adjustment: 30°-140°, stroke rate: approx. 50/min. Machine dimensions X/Y/Z: approx. 1100mm/950mm/1300mm, weight: approx. 800kg. An on-site inspection is possible. Hedpfx Acezd Ei Ao Tjt

Year of construction: 2021, condition: ready for operation (used), A Boschert notching machine with an integrated punching station is available. Cutting angle range: 30°-120°, punching capacity: 15t, punching diameter range: 9.19mm-91.87mm, cutting length range: 53.85mm-53.46mm, max. sheet thickness: 10mm, punching force: 15t, stroke rate: 40/min, table dimensions X/Y: 1000mm/650mm, machine dimensions X/Y/Z: approx. 1250mm/1000mm/1200mm, weight: approx. 2000kg. Documentation vorhanden. An on-site inspection is possible. Hodpfx Acsyugl Io Tot

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Hsdpfemck Ryex Ac Tjt Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: good (used), Year of construction: 1990, machine/vehicle number: V 254326, Offer 22407 Technical data: - Cutting length: 250 mm - Cutting angle: 90° - Cutting thickness: - Normal steel: up to 4 mm - Stainless steel: up to 3 mm - Aluminum: up to 5 mm Hjdpsif Aqvjfx Ac Tot - Stroke rate: up to approx. 55/min - Table size: W 800 mm x D 800 mm - Working height: approx. 940 mm - Stops adjustable steplessly in length and degrees - Drive: 400 V / 4 kW - Oil capacity: 50 l - E-foot switch - Space requirement: approx. W 800 mm x H 1250 mm x D 900 mm - Weight: approx. 700 kg

Condition: used, Year of construction: 1996, machine/vehicle number: 206988, Order No. 24554 Hsdpfx Ajv Uytzsc Tot Technical Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - Continuous cutting angle adjustment from 30 to 135° - Stroke rate 60 rpm - Table support surface with T-slots 800 x 1000 mm - Depth stops with measuring scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - Electric - Foot switch - Space required approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1100 kg

Condition: good (used), Year of construction: 2001, machine/vehicle number: 443954701005, Offer 25086 Hydraulic profile and bar steel shears with notching device and hole punch Technical specifications: - Flat steel shears - Flat steel - 400 x 120 mm - or: 300 x 22 mm - Section steel shears - L- and T-bars at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notcher - With square notcher for sheets up to approx. 13 mm Hsdsv I Sxvjpfx Ac Tjt - Notching depth approx. 70 mm - Notching width approx. 52 mm - Hole punch - Punching force approx. 100 t - Throat 510 mm - Stroke approx. 10 to 50 mm - Punches in steel up to Ø 31 mm in 25 mm - Electric contact stop - Various 10 punching dies + Dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Year of construction: 1996, condition: good (used), machine/vehicle number: 9182, Offer 23168 Technical data: - Notching possibilities + miters in 3 planes Hodpemb U E Aefx Ac Tot - right-angled, one-sided + two-sided + three-sided oblique . - Can be used as a shift cut crosscut saw - Pneumatic profile clamping Machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3,5 x 40 mm positive - horizontal 500 x 3,5 x 40 mm negative - notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. positioning with digital display - Swiveling range saw blade horiz. with vert. saw blade Saw blade - 45° - 90° - 45° mot. positioning with digital displays - Notching height adjustment with digital displays - profile stop shoulder manually tiltable 30° - 90° - 45° - pneumatic coolant check device - air connection 6 bar - drive 400 V / 2 x 3 kW - space requirement approx. W 2400 x H 2000 / D 1400 mm - weight approx. 1200 kg

Year of construction: 1995, condition: good (used), machine/vehicle number: 8883, Offer 26051 Technical Specifications: - Feed of the milling unit manual - Worktable height adjustable via handwheel - Horizontal and vertical material clamping Hedpfxjyz S Trs Ac Tjt - Cutter diameter up to 300 mm - Max. milling height 150 mm - Max. milling depth 110 mm - Max. milling length 500 mm - Angle-adjustable stop left & right 20° - 90° - Spindle speed 2800 rpm - Drive 400 V 2.2 kW - Compressed air connection 6 - 8 bar - Air consumption per cycle 10 l - Pneumatic profile clamping - Spray device - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg

Year of construction: 1996, condition: good (used), machine/vehicle number: 598, Offer 22391 Technical data: Hjdjiqgd Ejpfx Ac Tst - Cutting length up to 200 mm - Cutting thickness: - Steel with 400 N/mm² tensile strength: 6 mm - Stainless steel with 600 N/mm² tensile strength: 4 mm - Stepless cutting angle adjustment: 30 - 120° - Pneumatically clamped - Automatic cutting gap adjustment - Locking stops on the left and right, each 300 mm - Table surface area: 1000 x 800 mm - With T-slots and depth stops - Table height: approx. 900 mm - Depth stops - Drive: 400 V / 4 kW - E – foot pedal - Space requirement: approx. W 1000 x H 1350 x D 1510 mm - Weight: approx. 1800 kg

Year of construction: 1990, condition: good (used), machine/vehicle number: V 206 769, Offer 22346 Technical data: - Cutting length up to 200 mm - Cutting thickness: - Steel up to 6 mm - Stainless steel up to 4 mm - Stepless cutting angle adjustment: 30 - 135° - Stroke rate: 60 1/min - Table surface with T-slots: 800 x 1000 mm Hodpfei Hpdyjx Ac Tjt - Depth stops with measuring scale and angle adjustment - Table height: 860 mm - Drive: 400 V / 2.2 kW - E. - Foot switch - Space requirement: approx. W 1000 x H 1650 x D 1700 mm - Weight: approx. 1300 kg

Condition: good (used), Year of construction: 2000, machine/vehicle number: M 100-34 E3-D, Offer 24371 Technical data: - Machine for the production of closed cold-formed corners Hsdpfx Aeu Rartjc Tet - Material thicknesses 0.8 to 2.5 mm - max. achievable shelf height see table - min. Workpiece length / min. workpiece width 120 mm - Production time per formed corner, independent of material 10 sec. - Drive 400 V / 4 kW - Control panel with E - foot switch - Space requirement station 1 approx. W 1100 x H 1650 x D 1100 mm - Weight of station 1 approx. 800 kg - Space requirement for station 2 approx. W 800 x H 1400 x D 900 mm - Weight of station 2 approx. 500 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0156084906226, Offer 23145 Hydraulic Flat, Profile, and Bar Steel Shear with Notching Device and Punching Unit Hsdpfey Ddv Rjx Ac Tot Technical Specifications: - Flat Bar Shear - Blade length: 420 mm - For flat material: 400 x 15 mm - Profile Steel Shear - No blades installed - Angle steel at 90°: 110 x 10 mm - at 45°: 65 x 8 mm - T-steel at 90°: 90 x 10 mm - Bar Steel Shear - No blades installed - Round steel / Square steel: 35 / 32 mm - Notching device - For material up to 12 mm - Triangular notching: T 60 mm - Punching unit - Punching force: approx. 500 kN - Stroke, infinitely adjustable: 0 - 40 mm - Punches steel up to 30 mm Ø in 15 mm - Throat depth: 410 mm - Hydraulic drive: 400 V / 7.5 kW - Space required: approx. W 1400 x H 1800 x D 700 mm - Weight: approx. 1800 kg - Includes: various punches and dies, support/stop table, triangular notching unit, 2 foot pedal switches

Condition: good (used), Year of construction: 1990, machine/vehicle number: V 254629, Offer 25311 Technical Data: - Cutting length: 250 mm - Cutting angle: 90° - Cutting capacity: - Mild steel up to 4 mm - Stainless steel up to 3 mm Hjdjxqzirepfx Ac Tet - Aluminium up to 5 mm - Stroke rate: up to approx. 55 / min - Table size: W 800 x D 800 mm - Working height: approx. 940 mm - Stops infinitely adjustable in length and angle - Drive: 400 V / 4 kW - Oil filling: 50 l - Electric foot pedal - Required space: approx. W 1300 x H 1250 x D 1300 mm - Weight: approx. 800 kg - Mobile base frame