Used Shrinking Equipment for sale (251)

Condition: refurbished (used), Year of construction: 2018, Functionality: fully functional, Fully automatic film packaging machine for 4-sided product sealing with 2 rolls of flat film. Output up to approximately 85 cycles/minute. The machine operates without a forming shoulder and processes flat film, creating a tight, 4-sided sealed film bag around the product. Double-sided film transport creates symmetrical film bags into which the products are sealed. This makes even thick and extremely blunt films easy to process. Suitable for all common flat films from approximately 12–80 μm, e.g., polyethylene (LDPE), polyolefin film (PO), and polypropylene film (PP). Wearing parts and defective parts have been replaced. The machine has been technically tested at Kallfass and is fully functional. Technical Specifications Cross-sealing die: 550 mm Film: Semi-tubular film, approx. 12 - 80 µm Film roll width: max. 600 mm Min. product length: 80 mm Beb Hewfgp Aoa Rw Sowl Passage height: 150 mm Working height: 780 - 930 mm Power connection: 400 volts, three-phase, 50 Hz with protective conductor Rated power: 3.5 kVA Rated current: 5.1 A

Condition: new, Year of construction: 2018, Shrink Tunnel Manufacturer: Diez Type: HTC4030 Year of Manufacture: 2018 New machine, no operating hours! Width: 40 cm Inlet height: 28 cm Passage length: 165 cm Bjb Ha Rewdvpvjw Sewl External dimensions: 170 x 80 x 150 cm 220425

Condition: refurbished (used), Year of construction: 2016, BVM sc 4530 Bwjb Hjwbd Uzea Rw Sol

Condition: good (used), Year of construction: 1991, Functionality: fully functional, machine/vehicle number: 7560, working width: 1,200 mm, Shrink tunnel line ,Shrink wrapping machine, Film packaging machine, Shrinking machine Bjb Haovwc Ims Rw Sowl Product: Kuper Machine type: ST/I-1200 Machine number: 7560 Year of manufacture: 1991 connected load: approx. 51kW Working width: 1200mm This machine was only recently dismantled. We still have contact with someone who operated the machine.

Condition: used, Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 136-01, total length: 4,150 mm, total height: 2,380 mm, total width: 2,010 mm, type of input current: three-phase, product height (max.): 600 mm, product width (max.): 900 mm, input voltage: 380 V, compressed air connection: 10 bar, input current: 46 A, working height: 800 mm, width of welding knife: 30 mm, length of welding knife: 1,050 mm, pass-through height: 600 mm, overall weight: 1,500 kg, power: 28 kW (38.07 HP), film width: 900 mm, input frequency: 50 Hz, nominal power: 28 kW (38.07 HP), worktable width: 1,200 mm, worktable length: 1,070 mm, nominal current: 46 A, year of last overhaul: 2016, energy consumption: 28 kWh, space requirement width: 1,820 mm, working width: 1,200 mm, Equipment: documentation/manual, safety light barrier, We are selling our automatic banding machine with an attached shrink tunnel from Diez, model DSF-E 1100 NF Super. Until recently, the machine was used for shipping tires in bundles of two. It produced approximately five packages per minute. We are selling it because we purchased a faster, larger machine in mid-2024. The machine was manufactured in 2001, and we purchased it factory-reconditioned in 2016. I recorded the video two days ago, which shows that the machine is working. Bwob Haev Rdhhe Rw Sjl

Condition: good (used), Year of construction: 2010, Professional packaging machine from a renowned European manufacturer, equipped with many options and settings. Suitable, for example, for packaging food (bakery products, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printed and paper products, cosmetics and textiles. Functions: -Automatic mode / manual mode selectable. The packaging process can be started by several options. Manually by manual key or alternatively foot switch. Automatic by entering time intervals at which the shrink hood automatically lowers. -Automatic product ejection by the outfeed belt. -Automatic residual film rewinding possible. Setting options: - "Welding only" or alternatively "Welding and subsequent shrinking". -Welding time adjustable. -Shrinking temperature adjustable. -Shrinking time adjustable. -Hold time adjustable. -Cycle time for automatic operation adjustable. -Conveyor belt transport time adjustable. -Program memory. -Conveyor belt with spindle infinitely adjustable in height. Bsbspir Avo Ha Rw Sswl Other features: -Water-cooled welding unit (closed system). -Needle perforation possible via 2 adjustable needle rings. -Maximum package size theoretically approx. L 550 x W 400 x H 200 mm. -Maximum film roll diameter cirka 300 mm. -Maximum film roll length cirka 600 mm. -The machine can be pushed or fixed by means of lockable foot rollers. The machine was serviced by the manufacturer and then stored without further use. It can be demonstrated under power.

Condition: refurbished (used), Year of construction: 2010, Functionality: fully functional, Compact and economical shrink tunnel featuring the patented ring-nozzle heating system with particularly effective air flow regulation. Equipped with continuously adjustable transport speed. The use of transport rods in conjunction with the patented ring-nozzle heating system prevents any marks on the underside of the package, especially when using polyolefin film. Technical specifications: Tunnel passage width: 450 mm Tunnel passage height: 200 mm Length of heated tunnel hood: 1100 mm Length of additional insulating hood: 1400 mm Bweb Haowfgn Eo Rw Sjl Adjustable working height: 800 - 900 mm Power supply: 400 V three-phase, 50 Hz with protective conductor Rated power: 14.5 kVA Rated current at 400 V: 21.0 A Viewings and demonstrations are available at our premises by appointment. Functional guarantee, no warranty

Condition: good (used), Sleevit Shrinkmaster 750 Shrink tunnel Bjb Ha Rsvw Sqqew Sewl Stainless, heat shrink tunnel, adjustable temperature controls, can be supplied with a conveyor if required, 3Ph

Condition: like new (used), Year of construction: 2022, operating hours: 400 h, Functionality: fully functional, total length: 3,818 mm, total height: 1,785 mm, total width: 1,885 mm, product height (max.): 120 mm, product length (max.): 400 mm, product width (max.): 420 mm, working height: 870 mm, overall weight: 677 kg, film width: 600 mm, Equipment: documentation/manual, For sale: Minipack-Torre Pratika 55 smart packaging machine in mint condition. The machine offers the following features: – Automatic sealing machine with integrated tunnel – 180° return conveyor belt – Vertical photocell – Rotating bars in the tunnel – Stainless steel product tray – Adjustable guides – Cycle speed: 0 – 1,200 cycles per hour – Max. product size: length 400 mm / width 420 mm / height 120 mm – Max. film dimensions: width 600 mm / roll diameter 300 mm – Working height: 870 mm – Dimensions with return conveyor belt: length 3,818 mm / width 1,885 mm / height 1,785 mm – Connected load: 230 V / 1ph / 3 kW / residual current up to 30 mA (RCD type B or direct connection) – L-sealing system – Schneider Electric PLC M221 with 128 individually configurable and nameable programs Bweb Ha Rwewdw Adj Ssl – Color 4.3-inch touchscreen control panel – USB and SD communication interface – Servo Drive technology with brushless motor from Schneider Electric – Micro-perforation device with film tension adjustment at the set product height – Height-adjustable triangles and sealing bars – Standard conveyor belts comply with the strictest food regulations (FDA), fully antistatic – Motor-driven waste wrapper – Integrated shrink tunnel with reduced energy consumption – Weight: approx. 677 kg – Like new / Year 2022 / Very little use – Available immediately

Condition: good (used), Year of construction: 2008, Supervac GK 840 B Shrink Wrapper Bwob Hequ U D Doa Rw Ssl 9.9 KW 23.2 amp 700mm Belt Width Three Phase Power Fully Stainless Steel

Condition: good (used), Year of construction: 2013, Film Shrink Tunnel Manufacturer: Beck Type: HV 601 Year of Construction: 2013 Maximum tunnel width: 600 mm Maximum tunnel height: 280 mm Beb Ha Rwerntfyo Sewl Heated tunnel hood length: 1,000 mm Transport length: 2,100 mm Heating output: 4 - 12 kW, adjustable Connected load: 13 kW ä170425

Condition: used, Year of construction: 2006, Functionality: fully functional, machine/vehicle number: VD 01.06.012, total length: 4,500 mm, total height: 1,570 mm, total width: 2,400 mm, temperature: 240 °C, Equipment: documentation/manual, KALLFASS Universal 1600 NT shrink tunnel for sale in good, working condition. Manufacturer: KALLFASS GmbH Type: Universal 1600 NT Beb Ha Rwowcw Tts Sewl Year of manufacture: 2006 Maximum tunnel passage height: 500 mm Maximum tunnel passage width: 1600 mm Length of heated tunnel hood: 2500 mm Maximum temperature (infinitely adjustable) [°C]: 240 Extended tunnel outlet: 1000 mm Adjustable working height: 830 - 900 mm Product transport: Rod chain conveyor, silicone-coated rods Installed heating capacity (consumption in continuous operation approx. 40%): 60 kVA Rated power / rated current at 400 V: 68 kVA / 98 A (in stand-alone operation) Machine dimensions in mm (length x width x height) Approx.: 4500 x 2400 x 1570 Further information available upon request. Viewings and demonstrations are available at our premises by appointment.

Condition: refurbished (used), Year of construction: 2012, Manufacturer: Kallfass Verpackungsmaschinen GmbH Type: Bundle wrapping machine Super Wrap 1300 de Luxe In-Line Year of construction: 2012 Technical Data: Film: Flat film, up to approx. 120 µm Film roll width: max. top 1350 mm, bottom 1300 mm Passage height: 100-500 mm Bjborvx Ews Ha Rw Sowl Touch panel: Siemens TP177 Control system: Siemens S7 This particularly versatile banding machine works with 2 flat film rolls. The product is fed fully automatically via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled and therefore maintenance-free. The film rolls are simply placed on the machine and the film is removed by a motor. Manufacturer: Kallfass GmbH Type: Shrink tunnel Universal 1300 NT Year of construction: 2012 Technical Data: Tunnel passage width: 1150 mm Tunnel passage height: 600 mm Tunnel outlet, extended: 500 mm Particularly powerful shrink tunnel with bottom and laterally adjustable for precise control of the hot air outlet for optimum shrink results, even with difficult product contours. shrink results even with difficult product contours. Equipped with 2 hot air blowers and infinitely adjustable bar chain transport. Function guarantee, no warranty

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 0517 0804, year of last overhaul: 2023, Stand in cleanroom production. Very, very clean! Bwjb Haewckkre Rw Sel

Condition: not inspected (used), Year of construction: 2014, product height (max.): 300 mm, product width (max.): 300 mm, working height: 300 mm, film width: 600 mm, Shrink film packaging machine / film shrinking machine Manufactured by Shanghai Jinglin Packaging Machinery Type JL 2300 B Year of manufacture 2014 CE mark Shrink film packaging machine for packaging profile strips, KVH, glulam, parquet, and much more. by means of film wrapping and forming shoulders (flow pack process) Consisting of: - Infeed conveyor belt - Film wrapping and end sealing station - Outfeed conveyor belt / transfer conveyor belt - Shrink tunnel, heating temperature adjustable, approx. 100 - 220°C Working width approx. 300 mm Maximum opening height approx. 300 mm Maximum film width approx. 600 mm Conveyor belt width approx. 380 mm Film sealing via sealing bar Bsbjwbfxhj Ha Rw Sswl Side pressure rollers Infinitely variable feed rate Control via control panel / touchpad Including various forming shoulders, if available. Total connected load: 25 kW Compressed air: 6-8 bar Installation length approx. 9 m Installation width approx. 1.3 m Weight approx. 1500 kg

Year of construction: 2007, Condition: new, CPC Heat Shrink Tunnel (NEW) Power requirement 70KW Bob Hspy D Ansa Rw Sswl New - never installed, in storage since delivery in 2007 Complete with control panel Dimensions 3200mm W x 5050mm L Mesh Belt Width 2500mm Tunnel height 730mm

Condition: new, Year of construction: 2022, Functionality: fully functional, compressed air connection: 6 bar, workpiece weight (max.): 4 kg, Equipment: documentation/manual, safety light barrier, Dear Sir or Madam, We are selling a fully automatic Girsack machine. This machine can pack up to 25 packages per minute. We have 3 different downpipes with corresponding accessories. The machine is also equipped with a Smart-Date X45 thermal transfer printer. This is also included in the sale. With this machine, you can adjust the net length of the packaging steplessly. A double-pipe operation is also provided for continuous operation. You also have the option of setting and saving up to 15 programs via the color touch display. Bwebor Axguj Ha Rw Sel The machine also comes with a matching riser belt with a timing function. Unfortunately, we were never able to use this machine because it did not fit into our range. The machine ran once for training purposes. After that, never again. Please take a look at the pictures. If you are interested in the machine, please write to me.

Condition: good (used), Robopac Pack 5040A shrink wrapping machine with tunnel Semi-automatic shrink film packaging machine. Bjb Haewfra Hs Rw Sjwl Made in Italy. Device in very good condition, ready for production. Used in virtually every industry: printing, cosmetics, confectionery, wherever we want to elegantly package the goods sold. Semi-automatic operation, just put the goods into the packaging and the machine will do the rest. Machine parameters set from the desktop Sealing machine dimensions: 500x400mm Max. height 190mm. Weight: 400kg Power supply: 380V Installed power: 5.7kW Efficiency approx. 600 pcs/h shrink tunnel sealer Semi-automatic shrink film packaging machine. Made in Italy. Device in very good condition, ready for production. Used in virtually every industry: printing, cosmetics, confectionery, wherever we want to elegantly package the goods sold. Semi-automatic operation, just put the goods into the packaging and the machine will do the rest. Machine parameters set from the desktop Sealing machine dimensions: 500x400mm Max. height 190mm. Weight: 400kg Power supply: 380V Installed power: 5.7kW Efficiency approx. 600 pcs/h

Condition: good (used), Packaging machine of a renowned manufacturer. For example, suitable for packaging food (bakery products, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printed and paper products, cosmetics and textiles. -Display with setting options for sealing time, shrinking time and shrinking temperature. -Maximum package size: length 800 x width 600 x height 300 mm. -Perforation possible through several adjustable needle rings. -Equipped with 2 electric holding magnets for the hood. -2 fans to distribute the hot air. -Roll holder adjustable. -Product insertion adjustable. -Machine with foot rollers movable and lockable. -400 V / 50 Hz. The machine can be demonstrated under power. Bwebsn Sk N Nj Ha Rw Sel

Condition: excellent (used), Year of construction: 2015, SHRINK TUNNEL 250 CM X 73 CM INLET 40 CM HEATING 100 DEGREES Bweb Ha Rjpz Iw Dsw Sol

Condition: refurbished (used), Year of construction: 2007, Kallfass Universa 400 with Compact 650 SO shrink tunnel and 1000mm pre-belt Kallfass Universa 400, built in 2007 The system is available immediately. The price of the complete system includes the Universa 400. The machine is being technically overhauled and is in very good condition. Technical Specifications: - Length of cross-sealing die: 450 mm - Sealing die passage: max. 200 mm - Min. product length: 80 mm - Automatic length compensation to reduce the die gap - Film support plate available as an option - Control system: Siemens S7-300 - Operator terminal with Siemens TP270 - Sealing die with replaceable sealing bar - Side sealing knife - Processable films: PE and PO - Year of manufacture: 2007 - Kallfass Compact 650 SO shrink tunnel - 1000 mm long pre-belt The cross-sealing and side sealing systems are currently being inspected and overhauled. Infeed and discharge belts, and conveyor belts will be checked and replaced if necessary. The machine will be available after inspection and repair at the end of April. Installation of the system is included in Germany, Austria, and Switzerland. Beb Haoh N Dwfo Rw Sowl Fully automatic flow wrapping machines for packaging products – regardless of their length – in full wrap and without film overlap. Product feeding is via a conveyor belt, with simultaneous wrapping in a semi-tubular film via a forming shoulder. Product timing is controlled by a light barrier. The feed belt is easily adjustable to accommodate different product widths. After the product is wrapped in film, it is transversely sealed using a continuously heated sealing system. Longitudinal sealing is achieved using a continuous side sealing device. The height of the forming shoulder and sealing devices is manually adjustable. The remaining film strip is taken up on a film rewinder. If required, we also offer installation and service on this machine or systems from other manufacturers. We reserve the right to sell the product at any time. Price is EXW. No guarantee is given for technical data.

Condition: good (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, worktable width: 1,700 mm, worktable length: 2,000 mm, passage height: 250 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Beb Hajvvlyie Rw Sswl Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: like new (used), Ling Systems Bjb Ha Rwsd I Ncbj Sewl Stainless heat shrink tunnel stainless mesh belt, variable speed belt dimensions 2500mm x 400mm, max product height 80mm, adjustable digital temp control

Condition: ready for operation (used), Sealing width: 400mm, passage height: 300mm, packaging capacity: 60 cycles/min, film types: PE/polyolefin/PVC, max. film width: 550mm, max. temperature: 250°C, working height range: 800mm-900mm. On-site inspection is possible. Beb Ha Rwov Ubpkj Sswl

Condition: refurbished (used), Year of construction: 2007, Kallfass Universa 400 with Compact 650 SO shrink tunnel and 1000mm pre-strip Kallfass Universa 400, built in 2007 The system is available immediately. The price of the complete system includes the Universa 400. The machine is being technically overhauled and is in very good condition. Technical specifications: - Length of cross-sealing die: 450 mm - Sealing die passage: max. 200 mm - Min. product length: 80 mm Bwsb Ha Rweiqtuwj Ssl - Film support plate optional - Control system: Siemens S7-300 - Operator terminal with Siemens TP270 - Sealing die with replaceable sealing bar - Side sealing knife - Processable films: PE and PO - Year of manufacture: 2007 - Kallfass Compact 650SO shrink tunnel - 1000 mm long pre-belt The cross-sealing and side sealing systems are currently being inspected and overhauled. Infeed and discharge belts, and conveyor belts will be checked and replaced if necessary. The machine will be available after inspection and repair at the end of April. Installation of the system is included in Germany, Austria, Western Europe, parts of Eastern Europe, and Switzerland. Fully automatic flow wrapping machines for packaging products – regardless of their length – in full wrap and without film overlap. Product feeding is via a conveyor belt, with simultaneous wrapping in a semi-tubular film via a forming shoulder. Product timing is achieved via a light barrier. The feed belt is easily adjustable to accommodate different product widths. After the product is wrapped in film, it is transversely sealed using a continuously heated sealing system. Longitudinal sealing is achieved using a continuous side sealing device. The height of the forming shoulder and sealing devices is manually adjustable. The remaining film strip is taken up on a film rewinder. If required, we also offer installation and service on this or systems from other manufacturers. Subject to prior sale. Prices are EXW. No guarantee is given for technical data.