Used Boring Bar for sale (18,735)

Condition: used, Year of construction: 2013, operating hours: 11,801 h, functionality: fully functional, total length: 4,500 mm, total width: 1,530 mm, total height: 1,100 mm, overall weight: 1,500 kg, We are offering this used Breuning IRCO SIMAC 50.1 bar feeder, manufactured in 2013. We have a bar loader available: Breuning SIMAG 50.1. It was previously connected to a TWIN 42 machine. Here are some details: Year of manufacture: 12/2013 Operating hours: 11,801.5 hours Bedpfx Aoztqq Rsp Ioww Accessories: Collets 14, 17, 32, 38, 46 If you have any questions or require further information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,450 mm, table load: 6,486 kg, spindle diameter: 110 mm, table length: 1,600 mm, table width: 1,400 mm, feed length W-axis: 500 mm, rotational speed (min.): 5 rpm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, Kuraki Heavy Duty CNC Horizontal Borer Model: KBT 11 WDX - A Control: Fanuc Series 15M Year: 1996 Table Area: 1400 x 1600mm Bwedpjz S Nl Njfx Ap Iew Table Indexing: 0.001 Degrees (B Axis Rotary) Table Load 6486 KGS X Axis Travel: 2000mm Y Axis Travel: 1500mm Z Axis Travel: 1450mm W Axis Travel: 500mm (Spindle) Spindle Diameter: 110mm Spindle Taper: BT50 Spindle Speeds: 5-3000 RPM (Variable) 40 Station Tool Changer Swarf Conveyor Motor: 18-22 KW

Condition: good (used), DIGITAL BORING COLLET Bwedpfo Dv N Iex Ap Ijw

Condition: good (used), Year of construction: 2004, Ref. -No.: 10604 Manufacturer: UNION Type: TC 110 Year of construction: 2004 Type of control: CNC-Steuerung Control: SINUMERIK 840 D Powerline Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1250 mm Bjdpfx Ao Ahkwuop Ieww Z-Travel: 1000 mm W-Axis: 550 mm Table Height: 1050 mm Spindle Diameter: 110 mm Table Dimensions (Lengthxwidth): 1600 x 1250 mm Number of T-slots: 10 Max. Workpiece Weight: 6000 kg Clamping Area: 1250 mm T - groove width: 22 mm T - slot spacing: 125 mm Tool Taper: ISO 50 Max. Torque: 1639 Nm Feed Speeds X/Y/Z Axis: 6000 mm / min Rapid Traverse X-Axis: 15000 m / min Rapid Travel Y-Axis: 15000 m / min Rapid Traverse Z-Axis: 15000 m / min Feed Capacities X/Y/Z: 16000 x 16000 x 20000 N swivel angle: 360 ° Further information: Includes angle head 0,001° The machine can be viewed under power.

Condition: used, x-travel 2500 mm y-travel 2000 mm z-travel 1600 mm w-travel 800 mm control Siemens 840 D boring spindle diameter 150 mm bore spindle turning speed range 4-1500 U/min Feeds, stepless (Y, Z) 1-9999 mm/min Bwedozv Ulkspfx Ap Ijw Rapid Feed Y, Z, W 10000 mm/min Boring spindle taper ISO 50 Milling spindle taper ISO 60 surface area 1600 x 2000 mm workpiece weight max. 12500 kg total connected load 90 kW weight of the machine ca. 32200 kg

Year of construction: 2017, condition: excellent (used), Year of manufacture: 2017 Maximum machining diameter: 42 mm Maximum turning length: 300 mm Control system: FANUC Series 32i-Model B Bar feeder: BARLOAD Vito (left) Serial number: 22171258 Weight: 980 kg Filtration unit: included Conveyor belt: right Chip conveyor: included Tools: not included Bwjdpfxo Agvl Nj Ap Iew

Year of construction: 2017, condition: excellent (used), Number of axes: 8 Maximum machining diameter: 42 mm Maximum turning length: 300 mm Bsdpfx Apo Agvlzs Ijww Control system: FANUC Series 32i-Model B Bar feeder: BARLOAD Vito (left) Year of manufacture: 2017 Serial number: 22171425 Equipment: chip conveyor, chip transporter, filter, cooling unit Oil cooler: HABOR Tools: not included

Condition: new, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: SK18SC3, power: 9 kW (12.24 HP), volume flow: 1.6 m³/h, pressure (max.): 8.5 bar, type of cooling: air, New Kaeser SK 18 - 8.5 bar rotary screw compressor Sigma Control 3 controller Year of manufacture: 2026 Operating hours: 1 h Pressure: 8.5 bar Rated power: 9 kW Bwodps Ahy Irofx Ap Ijw Free air delivery at 8.5 bar: 1.60 m³/min Noise level: 66 dB(A) Compressed air outlet: 1" Dimensions (L x W x H): 750 x 895 x 1,245 mm Weight: 312 kg Convenient leasing options for new machines are available through our partner bank. Visit our showroom. We always carry a large selection of new and used compressors in stock!

Condition: like new (used), Year of construction: 2008, operating hours: 125 h, functionality: fully functional, Cold Jet Aero 75 DX Machine – Like New This machine is suitable for industrial cleaning applications, including both small and very large projects. A key advantage of this machine is that it does not rely on the latest generation of electronics. It is one of the most powerful machines on the market and is in excellent condition. Cold Jet Aero 75 DX Dry Ice Blasting Machine – Complete with the following equipment: COLD JET AERO 75 DX DRY ICE (125 HOURS OF USE) 1 x 20’ Blasting Hose 1 x Coldjet Applicator 2 x Nozzles – NEW One of the best machines in the world, with no electronics. This is what makes it reliable, and also keeps maintenance costs down. Bodpfxj Ad U Aco Ap Isww For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold come with a 1-year warranty. We also offer repairs and maintenance for Cold Jet machines. We also supply new Cold Jet machines. Contact us for more information. Worldwide shipping available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: excellent (used), Year of construction: 2015, Description to follow! Bjdpfx Apj Afzr Te Isww

Condition: like new (used), Year of construction: 2022, functionality: fully functional, drilling depth: 1,250 mm, feed length X-axis: 1,700 mm, feed length Y-axis: 800 mm, feed length Z-axis: 600 mm, workpiece weight (max.): 6,000 kg, travel distance X-axis: 1,700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 4,200 rpm, drilling capacity: 30 mm, Equipment: rotational speed infinitely variable, - HEIDENHAIN TNC 620 control unit - Electronic handwheel - Table dimensions: 1000 x 1000 mm - Manual table changing system with ZERO POINT table - Table rotation around B-axis: 360,000 positions/revolution - Table tilt around A-axis: +/- 22.5° - Deep-hole drilling spindle: 11 kW / 6000 RPM - Milling spindle: ISO 40 / 13 kW / 6000 RPM - Tool changer: ISO 40, 24 positions - Smoke extraction system: AR FILTRAZIONI Bjdpozixyrjfx Ap Ioww - CE marking

Year of construction: 2018, condition: excellent (used), Manufacturer: WIVIA Model: W428 Year of manufacture: 01/2018 Serial number: 01163 Number of axes: 8 Maximum turning diameter: 42 mm Maximum turning length: 300 mm Control system: FANUC Series 32i-Model B Bar feeder: BARLOAD Vito (left) Conveyor belt: Yes Chip conveyor: Yes Filtration system: Yes Bwedpfx Aj Agvlpep Isw Cooling unit: Yes Oil cooler: HABOR Tools: None

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,500 mm, feed length X-axis: 4,000 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,500 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, torque: 1,890 Nm, controller manufacturer: heidenhain, controller model: TNC 530, table load: 10,000 kg, spindle speed (max.): 3,000 rpm, spindle motor power: 33,000 W, spindle nose: ISO 50, number of spindles: 1, number of slots in tool magazine: 136, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, X-axis: transverse movement of the table, 4000 mm Y-axis: vertical movement of the head, 2500 mm Bsdpo Aa Awaefx Ap Ijww Z-axis: longitudinal movement of the column, 1500 mm W-axis: longitudinal movement of the quill, 600 mm Feed rates for X/Y/Z/W axes: 5/5/5/5 m/min Rapid traverse rates for X/Y/Z/W axes: 20/20/20/15 m/min Total number of tables: 3 – No. 1 pallet 1300 x 1600 mm (used for head changes) + No. 2 pallets 1300 x 1600 mm with 2 extensions 400 x 1300 mm Rotary table with rotation speed of 0 - 120 degrees/min INCLUDED ACCESSORIES: 2-spindle indexing head Quick-change system with BERG clamping jaws for mounting accessory heads Coolant passage through the spindle Chip evacuator for X=4000 mm travel RENISHAW RMP60 probe Robot tool changer with 136 positions AUTOMATIC pallet changer (1 pallet for accessory changes + 2 pallets for part machining) HEIDENHAIN TT140 tool probe CE marking

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Manufacturer: Knuth Model: VH F1 Machine type: Milling machine Machining process: Shank milling MACHINE DETAILS Bwedpfs Ad Iuxex Ap Ijw Length: 1,500 mm Width: 1,000 mm Height: 2,000 mm Weight: 700 kg

Condition: excellent (used), Standard boiler Duisburg 10000kg/h 15,7 Bar +Weishaupt gas burner. Already dismantled ,Ready for collection Bwodpfenwit Sex Ap Ijw

Condition: excellent (used), Year of construction: 1977, overall weight: 370 kg, Ayen automatic nut runner with a large number of tools. Bwsdpfx Apsz Ekqlj Ijw

Condition: used, Year of construction: 2008, operating hours: 5,778 h, functionality: fully functional, total width: 1,980 mm, total length: 3,750 mm, total height: 2,050 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 2,600 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, water tank capacity: 400 l, volume flow: 1.2 m³/h, empty load weight: 1,940 kg, temperature: 40 °C, fuel tank capacity: 220 l, type of cooling: water, noise level: 103 dB, power: 129 kW (175.39 HP), year of last overhaul: 2026, water pressure: 2,500 bar, cubic capacity: 4,760 cm³, pump capacity: 20 l/min, Equipment: type plate available, Falch trail jet 100 2500-20-0-d with a maximum of 2500 bar and 20 l/min. The pump is driven by a water-cooled 4-cylinder DEUTZ diesel engine. General specifications: ----- Operating pressure: 2500 bar Flow rate: 20 l/min Maximum pump speed: 590 rpm Drive engine: 4-cylinder DEUTZ diesel Drive engine power: 129 kW Drive engine speed: 1800 rpm Fuel tank: 220 L Maximum fuel consumption: 12.5 L/h Safety system: ----- Low water level safety valve Burst discs Steel safety frame Impact-resistant water tank Impact- and rust-resistant fuel tank Electronic Falch Easy display system Engine temperature Alarm for open lid Oil pressure Engine overheating Advantages: ----- Shorter setup times Steel safety frame for reduced downtime Water filter for consistent water quality High-quality components reduce maintenance costs Water-cooled diesel engine Long service life Bjds Agb Dzepfx Ap Ijww Maintenance every 500 hours Low fuel consumption Theft protection Dimensions and unladen weight: 3750mm x 1980mm x 2050 mm (1940 kg) Includes standard accessories (20m HD hose, control cable, gun with lance and jet nozzle) and rotor nozzle. Condition: HD pump has a new seal kit, new battery and water filter. Similar to, but not a Denjet, Dynajet, Hammelmann, Kamat, Uraca, Woma, etc.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), RENNER RS-B 7,5 (7.5 bar) oil-injected screw compressor Operating hours: 0 h Pressure max: 7,5 bar Rated power: 7,5 kW Delivery quantity by 7.5 bar: 1.13 m³ / min Sound level: 78 dB (A) Compressed air outlet: G 1/2 " Dimensions length x width x height: 776 x 556 x 597 mm Weight: 189 kg Bedpfxo Aazdro Ap Isww Visit our shop. We always have a large selection of new and used compressors in stock!

Condition: used, total height: 1,800 mm, total length: 12,000 mm, total width: 2,400 mm, Colour: Green Empty weight: 12.000 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Model Planer: Movable table - Power [kW]: 12.0 - Number of axes [pcs.]: 4 - Rotary table: Yes - Tailstock center: Yes - Spindle diameter [mm]: 110 - Table length [mm]: 1000 - Table width [mm: 1120 - X-axis travel [mm]: 2400 - Y-axis travel [mm]: 2000 - Z-axis travel [mm]: 1800 - Tool holder: MK6 - Main spindle power [kW]: 11 - Max. spindle speed [rpm]: 1800 Bwedpfx Asz Hph Esp Isw - Max. workpiece weight [kg]: 4000 - Options: Boring head, Boring plate, Digital readout - Transport dimensions: 12000mm x 2400mm x 1800mm (l x w x h) - Transport weight [kg]: 12000kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, TOS W100A - Horizontal Boring and Milling Machine The W100A is one of the most successful models from TOS Varnsdorf and represents the latest version of the classic series (H100, H100A, W100, W100A). It is robustly built, technologically versatile, and easy to operate and maintain. Ideal for single and small batch production with high reliability and comparatively low costs. - Classic design with a fixed column - Extendable spindle - Cross-traveling, rotatable work table - Integrated faceplate support in the spindle head - Option to use long drill rods with support from the drill support - Hardened and ground guide rails - Central lubrication - Position indicator The machine is suitable for drilling, milling, facing, and threading, as well as general machining operations on large workpieces. Bode Ahg Dtjpfx Ap Ieww Technical data Spindle head: - Spindle diameter: 100 mm - Spindle connection: ISO 50 - Spindle travel (Z): 900 mm - Spindle center height above the table (Y): 0 - 1120 mm - Distance between faceplate and support bearing: 2800 mm - Faceplate diameter: 600 mm - Centering hole diameter in the table plate: 280 H6 mm - Centering hole depth: 8 mm - Max. facing diameter: 900 mm T-slots: - Faceplate, number/size/pitch: 2 / 20 H12 / 335 mm - Slide, number/size/pitch: 2 / 16 H12 / 150 mm Table: - Table cross travel (X): 1600 mm - Table longitudinal travel (W): 1250 mm - Clamping area: 1250 × 1250 mm - T-slots, number/size/pitch: 9 / 22 mm / 160/80 mm - Centering hole diameter in the table: 180 H6 mm - Centering hole depth in the table: 6 mm - Max. workpiece weight: 3000 kg - Tailstock slide travel: 1000 mm Speed: - Number of spindle speed steps: 23 - Spindle speed range: 7.1 – 1120 rpm - Number of faceplate speed steps: 16 - Faceplate speed range: 7.1 - 224 rpm - Max. torque of the spindle at speed: 3350 / 7.1 - 78.5 / 1120 Nm/rpm Feeds: - Drilling feeds, number/range: 32 / 0.02 - 12 mm/rev - Drilling feeds, number/range: 18 / 18 - 900 mm/min - Drilling feeds, number/range: 32 / 0.02 - 12 mm/rev - Drilling feeds, number/range: 18 / 25 - 1400 mm/min Rapid traverses: - Spindle, spindle head, table & tool slide: 2800 mm/min - Table rotation: 1 rpm - Tailstock bearing: 696 mm/min Threads: - Metric threads, number/range: 18 / 0.25 – 12 mm - Inch threads, number/range: 18 / 120 - 2.5 threads/1" Electrical data: - Main motor power: 11 kW - Total power consumption: 15 kW - Operating voltage: 3x 400 V / 50 Hz Dimensions & weights: - Machine dimensions WxHxD: approx. 6020 × 3000 x 3500 mm - Machine weight: approx. 14000 kg

Condition: ready for operation (used), CNC Floor TYPE BORING MACHINE MAKE PAMA MOD. AC125M X4000 Y 2000 Z800 Rotry table 2200x1800 Table long travel 1750 Load on table 12 ton. Indexing of table 360000 degrees Spindle 125 ISO 50 3 speed 4-138 Bsdps Adp Ndofx Ap Ioww 12-416 26-1250 CNC ECS 02 nos floor plates 4000x2000

Condition: excellent (used), functionality: fully functional, 1x Universal milling machine Deckel FP4 NC Dialog 3 1x Universal milling machine Deckel FP4 NC Dialog 4 Manufacturer: Deckel Type: FP4 Condition: used, good ----- Travel ranges: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Table clamping surface: approx. 700 x 400 mm Speed range: approx. 50 – 2500 rpm Tool holder: ISO 40 ----- Tool clamping: hydraulic Drive power: approx. 6.0 kW Feeds and rapid traverses: in all 3 axes Feed range: approx. 8 – 630 mm/min Rapid traverses: approx. 3.0 m/min ----- L x W x H: approx. 2300 x 1800 x 1800 mm Weight: approx. 1750 kg *Machine light *Spindle guard Bodpfx Ape Acd Tbs Isww Scope of delivery: * 5x tool holders * Allmatic vise * Walter dividing head * Documentation * Spindle guard

Condition: ready for operation (used), travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 4,500 mm, SKODA WD 160 A BORING MACHINE Spindle diameter: 160 mm X-axis travel: 7,000 mm Y-axis travel: 4,500 mm Z-axis travel: 1,200 mm B-axis travel (table): 360° W-axis travel (ram): 1,250 mm Rotary table: 2,000 x 2,000 mm - Maximum weight: 20 t - Longitudinal travel: 1,250 mm CNC: Fagor 8055 Electronic handwheel Spindle speed: 275 - 2,570 RPM Tool: ISO 50 Bsdozb H N Tepfx Ap Ioww 2 x 90° square Universal and 90° head

Condition: used, mileage: 702,595 km, power: 210 kW (285.52 HP), first registration: 05/2012, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, next inspection (TÜV): 12/2026, color: silver, gearing type: mechanical, emission class: euro5, loading space volume: 43 m³, loading space length: 724 mm, loading space width: 2,480 mm, loading space height: 2,390 mm, Year of construction: 2012, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, M-Benz Atego 1529 4x2 Box Van VIN: 6581 Chassis / Components: * Wheelbase: 4,800 mm * Leaf / Air Suspension * Tires: 285/70 R19.5 * Remaining Tread Depth: Front ~40/80%, Rear ~30/30% * 2 x Plastic Diesel Tanks * Underride Protection (integrated) * LBW-Bär BC 1500 S4-B3 Cab: * Classic Space S * 2 Seats * Full Spoiler * Air Conditioning * Auxiliary Heater * Cruise Control * Radio with AUX / USB / BT * CB Radio * Hands-Free System Body: * Box Van Body (Manufacturer: Basler) * Load Area Dimensions L x W x H: 7.24 m x 2.47 m x 2.38 m * LBW-Bär BC 1500 S4-B3 Engine / Transmission: * 286 hp / 210 kW // 6,374 ccm // Euro 5 * Engine Brake * Differential Lock * 8-Speed Manual Transmission Weights: * Gross Vehicle Weight: 15,000 kg * Unladen Weight: 7,460 kg * Payload: 7,540 kg Other: * German Vehicle * Valid Inspection until 12/2026 * 1 Previous Owner New inspection and weight adjustments (increase or decrease) are possible upon request. We won't leave you alone even after the purchase: We will assist you in obtaining export or short-term license plates. We can also arrange for the transport of your vehicle within Germany. Just contact us – we will be happy to help! We speak German, English and Russian. All information without guarantee. Subject to changes, errors, printing and typesetting errors, and prior sale. About us: Bwedpfe Ah Ab Dox Ap Iew Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. For many years, we have stood for experience, reliability and competence in the field of refurbishment and sales of commercial vehicles. Our strength lies in the buying and selling of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a variety of applications. With us, not only the vehicle counts, but also the service behind it. Fairness, integrity and customer satisfaction are our top priorities. That is why we support you personally and reliably – from the first contact to the handover of your vehicle. Come and see for yourself. We look forward to your inquiry! Our service for you: Vehicle Loading We will help you load your purchased vehicles. Special Transport We will support you in the organization of special transports. Export and Short-Term License Plates We will help you obtain export license plates or short-term license plates. Customs Formalities We will also assist you with customs matters. Vehicle Transport Upon request, we will arrange for the transport of your vehicle within Germany.

Condition: new, For sale: Professional carrying harness for self-contained breathing apparatus (SCBA) Dräger PSS 7000 • Model: PSS 7000 • Pressure gauge: up to 300 bar Bwedpfx Apsz Smy So Ijw • Part No: 3355850 • Type No: 3355068 • Technical condition: good • Complete set of straps and buckles • Sturdy frame with no cracks Selling exactly what is shown in the photos. No cylinder or face mask included. Firefighter-grade equipment – top series from Dräger.