Diameter of working spindle : 200 mm
Travel X-axis : 4000 mm
Travel Y-axis : 3150 mm
Spindle speed : 0 - 1120 /min.
Spindle travel - W axis : 1600 mm
Ram travel (V) : 3150 mm
Spindle taper : ISO 50
Travel Z-axis : mm
Clamping area of rotary table : 2000x2000 mm
Max. load of table : 20000 kg
The machine is in good condition, possible to test it.
Rotary table E20.
Gvvff0
2 pcs of floor plates 1870 x 6400 mm.
Milling heads.
Contact me for price and more information.
Diameter of working spindle : 160 mm
Travel X-axis : 7000 mm
Travel Y-axis : 2500 mm
Spindle speed : 1 - 1600 /min.
Spindle travel - W axis : 1250 mm
Spindle taper : M100
Main motor power : 75 kW
Machine weight : 46000 kg
The machine is in good condition, still under power.
Including 4 floor plates 1870 x 5580 mm.
Rich accessories: milling heads and rotary table E20.
Bex0rndozx
Contact me for price and more information.
Number of boring units // Diameter boring units (mm)
9x 3.0
5x 3.5
1x 4.0
3x 4.5
6x 5.0
9x 5.5
35x 6.0
2x 6.5
19x 7.0
18x 8.0
1x 8.5
9x 9.0
5x 10.0
9x 11.0
2x 13.0
3x 14.0
1x 15.0
1x 16.0
2x 18.0
8q7hotmtj
1x 19.0
boring head Wohlhaupter MultiBore
No: 132059
Ø: 82 - 103 mm, shank Ø: 36 mm
With extension 125 mm, 119065
Ol8gh
Total length: approx. 250 mm
and basic mounting SK50 DIN 2080
boring head Wohlhaupter MultiBore
No: 148009
Notched tooth body MVS80-366 A150-205
X=60 mm, Ø: 150-205 mm / slide 5.9 - 8.1 in
Shaft-Ø: mm With extension 125 mm,
Total length: approx. 260 mm
And basic mounting SK50 DIN 2080,
Gebr. boring head Wohlhaupter Multibore
No: 136088
D = 150-205 mm
With tool holder Wohlhaupter MultiB...
Temperating machine , Make Tool-Temp (CH), Type TT-131 N, . 91-6662, Material Mild steel, Electric heating , Electric capacity 12 kW 380 Volt, With pump , Capacity 5 bar max 110 l/min, Motor 1,8 kW, With temperature controller , Year of construction unknown, With switch , Floorspace 0,9x0,4 M, Total height 0,9 M, Weight 160 Kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide...
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper
Be008h8jjg
-Span width: 50 to 100 mm
-Load capacity: 1 ton
-Dimensions: 225/80/H190 mm
-Weight: 5.8 kg
Spindle speed: 3500 / 3000 1/min
Main drive power S1: 51 kW
Spindle torque S1: 2250 / 3225 Nm
Wgsbik
Spindle quill: Ø 130 – 160 mm
RAM-Cross section: 460 x 520 mm
X-axis: 4.000 + N x 1.000 mm
Y-axis: 2.000 + N x 500 mm bis max. 4.000 mm
Z-axis (RAM): 1.200 mm
W-axis (quill): 800 mm
Z + W: 2.000 mm
Steuerung: SIEMENS Sinumerik 840D sl / HEIDENHAIN TNC 640
Rapid feed X-Achse: 35 m/min
Rapid feed Y-, Z-Achse : 30 m/min
Options: Spindle extension, NC-swiv...
diameter 90 mm
workpiece length beliebig mm
work piece width beliebig mm
Bürstendurchmesser 250 mm
Bürstenbreite 60 mm
voltage 380 V
frequency 50 Hz
power capacity 3 kW
weight of the machine ca. 0,1 t
dimensions of the machine ca. 1,0 x 0,6 x 1,2 m
M8zbld
This machine is well suited for burring of fore-parts
and side walls,
mounted on machine cupboard,
with accessory parts for short work pieces and plate edges,
The temperature control unit from Tool Temp was checked in the workshop;
- oil unit
- communication interface equipped
- Manual filling
Brljrnyxd2
CNC Lathe SUT 126 NC
Producer: ŠKODA MACHINE TOOL
YP: 1997
Control Siemens ... Sinumerik 840 C
Turning diameter ... 1000mm
Turning length ... 14500mm
Circumferential diameter over bed ... 1260mm
Swing diameter over support ... 1000mm
Distance between stand ... 14500mm
Max. Workpiece weight ... 20000kg
Max. Torque ... 63000Nm
Btdh8kcjxo
The machine is in good condition and can be tested under power.
Temperating machine , Make Tool-Temp (CH), Type TT-162 E, . 98-14331, Material Mild steel, Electric heating , Electric capacity 13 kW 400 Volt, With control , Year of construction unknown, With switch , Floorspace 0,x,3 M, Total height 0,9 M, Weight 120 Kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands....
The driven tools for Duplomatic revolvers
Oxdkl
are all in a very good condition.
For sale are 9 pieces axial and 9 pieces radial tools.
Spindle quill: Ø 130mm optional Ø 150 mm
Spindle speed: 3.500 rpm optional 4.000 rpm
Main drive power S1: 40 / 46 kW
Glwhb3t
Spindle torque S1: 1.650 / 2.050 Nm
Hydrostatic machining table: 1.600 x 1.600 / 1.600 x 2.000 / 2.000 x 2.000 / 2.000 x 2.500
Table load, max.: 20.000 kg
X axis: 2.000 / 3.000 / 4.000 / 5.000 mm
Y-axis: 2.000 / 2.500 / 3.000mm
Z axis: 1.500 / 2.000 / 2.500 / 3.000 mm
W-axis (Spindle quill): 800 mm
Control: SIEMENS Sinumerik 840D sl / HEIDENHAI...
Here we offer a vacuum glass laminating line with 2 heaters.
Glass laminating plant, with 2 heaters
TOOL-TEMP
Model type TT-138b, S/N 310-1877-1, 310-1877-2
Laminating surface approx. 2,900 x 1,400 mm, with feeding table, stainless steel
Control Panel, surface approx. 2600 x 1,250 mm
Control tower PC, 17 "-LCD monitor ACER"
Model/type AL711, mouse, keyboard
The system consists of the following main components:
Vacuum chamber (Chamber + cover)
Pneum.-cover drive
Transport roller conveyor
Lifting ...
The oil. Device from the company Tool Temp was checked in my workshop for function .
It has an interface
Brgbrmoiee
Temperating machine , Make Tool-Temp AG , Type Water Chiller TT-11000/40V2A, . 26-04902-1, Water heater (cooling), Electric capacity 4500 Watt, With cooling (R-134A), Temperature -10/+ 40 Degr.C, Tank capacity 50 Ltr, With pump , Motor 1,5 KW, 220-240/345-415 Volt, With temperature controller , Year of construction "unknown", Mounted on wheels , Floorspace 1,0X0,7 M, Total height 1,1 M, Weight 200 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced pric...
Type: TT-162 E
Temp. control: MP-694
Biqowmldgi
Spindle quill: Ø 150mm or Ø 180 mm
Spindle speed: 3.000 rpm or 2.500 rpm
Main drive power S1: 46 / 70 kW
Spindle torque S1: 2.620 / 4.120 Nm
Hydrostatic machining table: 2.000 x 2.000 / 2.000 x 2.500 / 2.500 x 3.000 with a table load, max.: 40.000 kg
Hydrostatic machining table: 2.500 x 3.000 / 3.000 x 3.000 / 3.000 x 3.500 with a table load, max.: 60.000 kg
X-axis: 3.000 / 4.000 / 5.000 / 6.000 mm
Y-axis: 2.000 / 2.500 / 3.000 mm / 3.500 mm / 4.000 mm
Z-axis: 1.500 / 2.0...
Radial drill press in good condition.
With motorized boom (Up / Down)
Morse taper 4
Bnxo2cb
Travel on the boom: 725 mm.
Travel on spindle: 270 mm.
32 - 2500 rpm.
0.06 - 0.8 mm / rpm feed rate.
Spindle diameter: Ø65 mm.
Max height between table and spindle: 995 mm.
Total dimensions: 180 x 85 cm.
Height: 248 cm. (Transport height: 228 cm)
This pump was located in a temperature control unit from the company Tool-Temp
Bjljfiz30z
Model TT157E
Power : water 90°C / mould weight up to 1'200 kg
oil 150°C / mould weight up to 600 kg
Equipment / Additional information:
Pump capacity: 4.5 bar
Cooling: indirectly
Temperature range: up to 150°C
Heating capacity: 6 kW
Cooling capacity: 45 kW at 90°C
Flow control: Yes
Temperature control: MP-888
7eiy8kr8g
Electric capacity 17,9 kW, Make Tool Temp (CH), Type TT- 380, Tank capacity 15 ltr, . 23-05397-1, Floorspace 1,2 x 0,45 M, Total height 1,2 M, Weight 250 KG, Extra Specifications electrical power 17,9 kW , medium: Heat transfer fluid, CE certified What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit ou...
A TT-156 E temperature control unit is available.
Details of the individual devices are listed below.
All devices are supplied with operating instructions.
Capurfam
Type: TT-156 E
Device no.: 93-2640
Power: 10100W
Temp. control: MP-694
Sharpening TOOL VOLLMER FINZ 4-800
Location
Gorzow Wielkopolski.
Conditions of delivery
Pick your own
Cost of delivery
Client cover
Md3zx
startup type
negotiated
Description
Comments
GRINDING AUTOMATIC CIRCULAR SAW WIDIOWYCH THE HYDRAULIC
138 bar - 8 output lines - flow rate 16 l/min -
motor 3.75 kW - weight 377 kg - 3 phase 400 V -
type of coolant oil only
Blvqz8dp0e
it was fitted to Star SR-20RIII
Water cooling unit for water temperatures +10°C to +40°C at ambient temperatures up to +45°C.
Cooling capacity 28 KW normal capacity
Gwy8ag
Heating 6 KW; Water tank 150 l ; Refrigerant R-134a; Electronic controller with digital display; Air volume 5700 m3/h; Connected load approx. 8.5 KE
Tempering units
Tool-Temp
TT-150 G
Year ca 1995
Bjyznefvvf
Temperating machine "Chiller" (1x), Make Tool-Temp AG Romanshorn, Type TT-20.000 WK/R-404 A, . 97-13868, Heating medium: R-404 A, Electric capacity 6.900 Watt, 400 Volt, Temperature +10/+40 Degr. C., With temperature controller , Year of construction unknown, Mounted on wheels , With switch , Floorspace 1,2x0,8 M, Total height 1,6 M, Weight 350 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any ...
DIGITAL BORING COLLET
B22ux0
Sharpening TOOL Schonberger NURNBERG TKRS
location
Gorzow Wielkopolski.
Conditions of delivery
Pick your own
Cost of delivery
Wbirpx82p
Client Cover
startup Type
negotiated
description
Comments
GRINDING AND SAW tape Blades for circular saws and milling Dividing HAVE COMPLETE READY TO WORK
Large Mechanical Crank Press Upsetter available.
This press is designed to forge flanges on shafts, make big bolts and other big metal components in a single 2-second cycle.
Capacity: 1200 tons (main vertical crank), 600 tons (side-acting clamp)
Weight: 112 tons
Manufacturer: Coventry Machine Tool Co, England (Circa 1940's)
Cast steel frame. New bronze bearings in flywheel.
Currently installed and working, but MUST find a new home as soon as possible as land has been sold for development.
Make a...
TOOL
Bdvpmna9ns
BJ 1988
Temp TT 162E
86 c.
Temperature 90 degr.C, Make Tool Temp (CH), Type TT 168 E, . 312-4543-1, Tank capacity 16 Ltr, Year of construction 2012, With switchgear , Floorspace 0,8x0,3 M, Total height 0,7 M, Weight 150 Kg, CE , Extra Specifications Temperature control: self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring. Flow control: electronically, with digital display and automatic control of the minimum flow. Temperature rang...
Mortising machines Maka Db-6 v Second hand 1977
Nvchn
Make:
Maka
Model:
Db-6 v
Description:
VERTICAL MORTISER MAKA DB-6 V Year of construction: 1977 Machine condition: very good afer repairs capital Offertype: used machine offer Location: Poland Technical data: AFTER REPARIRS VERY IMPORTENT VERTICAL
Year:
1977
Tempering units
Tool-Temp
TT-157 E
year ca2000
Bwvtk39
Temperating machine , Make Tool Temp, Type TT-162E, Floorspace 0,8x0,3 M, Total height 0,9 M, Weight 120 Kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more information and many more machines!
Rkab9ya7
Drilling machines Eugen Mayer 715 Second hand 1998
Make:
Jfdds7p
Eugen
Model:
Mayer 715
Description:
dauble saw with boring system eugen mayer
Year:
1998
Temperature 90 degr. C, Make Tool Temp AG (CH), Type TT 168 E, . 312-4005-1, Tank capacity 16 Ltr, Year of construction Unknown, With switchgear , Floorspace 0,9x0,4 M, Total height 0,8 M , Weight 140 Kg, CE , Extra Specifications Temperature control: self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring. Flow control: electronically, with digital display and automatic control of the minimum flow. Temperat...
Temperature 90 Degr. C, Make Tool Temp (CH), Type TT 168 E c, . 315-6464-1, Tank capacity 16 Ltr., Motor 12 kW 380 Volt, With temperature controller , Year of construction 2015, With switchgear , Floorspace 0,8x0,4 M, Total height 0,8 M, Weight 100 Kg, CE , Extra Specifications Temperature control: self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature w control: electronically, with digital display and automatic contr...
Temperating machine , Make Tool-Temp AG 9CH), Type TT-137 N, . 29-02921-1, Material Stainless steel, Working pressure 5 Bar, Water heater , Electric heating , Heating medium: (Presurized) water, Electric capacity 12 kW, Temperature Max 160 degr C, Year of construction 2007, Mounted on wheels , With switch , Floorspace 0,9x0,4 M, Total height 0,9 M, Weight 160 Kg, CE , Extra Specifications The TT-137 is a compact and rugged Temperature Control Unit for pressurised water circuits. It provides safe...
Heating medium: R-404 A, Make Tool-Temp AG (CH), Type TT-20000 H/WK, . 98-02754, Electric capacity 13 kW 400 Volt, Temperature +10/+40 Degr C, Year of construction 1998, Mounted on wheels , With switch , Floorspace 1,2x0,8 M, Total height 1,6 M, Weight 400 Kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlan...
Distance Between Centres: 1270mm 50”)
Swing Over bed: 381mm (15”)
Swing Over Gap Piece: 571mm (22.5”)
Speeds: 25 - 2000 RPM
Quick Change Tool Post
88zrn2m
Tool Post Inserts
3 Jaw Chuck
Steady
Faceplate
Length Stop
Chuck Guard
Coolant
DRO
Heidenhain iTNC 530 Control, X = 3000 mm, Y Axis Vertical = 1300 mm, Z Axis Cross = 2000 mm, with Through spindle coolant. 2000mm x 1600mm Rotary Table 13,000 Kgs load. Manufactured 2008Serial No. 200057
Control Heidenhain iTNC 530
Table Size 2000mm x 1600mm
Table Rotation .0001 Degrees continuous. 360 degrees
Weight on Table 13,000 kgs
Longitudinal Traverse - X Axis 3000mm
Cross Traverse - Z Axis 2000mm
Vertical Traverse - Y Axis 1300mm
Wyq8zc3
Feed Rate X - 22,500 mm/min, Y & Z 20,000 mm/min
...
Code: ST3303
Samand Triple Tool Lapping Grinding Machine
Type: Triple Wheel Tool Lapping Grinder
Wheel Dia.: 2 – 350mm
1 – 200mm
Bfmnwkwo
Moulding Tool for manufacturing Cutlery
32 impression moulds ran on 250 - 300ton
Knife 32 impression.
Weight 8 grams each.
Tool Dimensions: Mould Height 500. Width 400. Shut Height 250mm.
Fork 24 impression.
Weight 6 grams each.
Tool Dimensions: Mould Height 500. Width 500. Shut Height 250mm.
Kab7hz
Spoon 24 impression.
Weight 7 grams each.
Mould Height 500. Width 500. Shut Height 300mm.
Material proceed: PP / PS / Bio.
Machines used 250 / 300ton
PRICE: 12900 Euros (Loaded to Transport)
spindle diameter:150 mm
x-travel:11000 mm
y-travel:3000 mm
ram stroke:800
dimension of the ram:325 x 325 mm
spindle stroke:700 mm
spindle taper ISO:50
spindle turning speed range:3 - 2000 U/min
feed range:1 - 10.000 mm/min
rapid motion - x-axis:10.000 mm/min
rapid motion - y-axis:10.000 mm/min
table surface area:2000 x 2500 mm
Bpyy223xpg
table load:40 t
b-axis:360 °
rapid power traverse circular:1,9 1/min
V-axis:2500 mm
spindle motor:65 kW
total power requirement:100 kW
weight of the machine c...