Bihler grm 50 for sale

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
4
Wire bending machine different. Used and fully functional Complete line for the production of spring plugs. In total there are 7 machines and 7 reels and 2 curing ovens Cr97mlpe Including several tools The machines are currently in operation and can be viewed and tested at any time. more
3
Fully working Stamping and forming machine BIHLER GRM 50 in good shape with all corresponding slides and tools. 8t lobe press, feeding length 320mm, material width up to 40mm. The machine is still connected and runs excellent without any issues. A corresponding material feeder from 1977 can be bought for a small extra charge. Sln78mxd more
5

Stamping- and Bendingmachine BIHLER GRM 50

More Bihler Grm 50
Industriestr. 1, 36323 Grebenau, DEGermany
6576 km
1986
excellent (used)
equipped with: slide feeder system right side 1 Eccentricpress 250 kN 4 Standard slide units 1 Narrow slide unit working range: wire diameter range: 0,5 - 5,0 mm D8fsq3h strip metal width: up to 70 mm feeding length: up to 320 mm output: up to 132/min. more
1
with 5 slides, press Mumeqo more
3
Bihler GRM 50 multislide wire and strip forming machine. Equipped with 6 forming slides. Maximum wire diameter 5mm. Maximum width of strip 40 mm. Standard feed length 320 mm. The electrical command panel was modernized in the 90’s. Yrzvnc more
5
equipped with: 4 Normal slide units 1 Narrow slide ubnit 1 Eccentricpress 250 kN working range: wire diameter range: 0,5 - 5,0 mm stripmetal width: up to 70 mm feeding length: up to. 320 mm Vrrjqy output: up to. 132/min more
1
with 5 slides, press Besw0ov2ym more
1
with 5 slides, press Xtj8gag more
2
Slides for Bihler GRM 50 Dvgexyb New, Used, or Rebuilt more
7
One used BIHLER GRM80 multislide punching and forming machine, year of mfg 1994, German origin. Complete with Bihler GSE4 tapping device and 2x tapping heads. Mrxuz3ma Equipped with 5x forming slides and 30 ton press station, gripper feed on right-hand side with strip straightener. Max width of strip 80 mm. Max wire diameter 5 mm. Standard feed length 520 mm. Max operating speed 250 strokes per minute. Air clutch. Power supply 400V, 50Hz. Weight approx 5000 kgs. more


bihler grm...
daily

New machines via email!

Stay updated!
7
equipped with: 1 Right hand feeding system Bd3znn28s2 1 Eccentricpress 250 kN 1 Standard slide unit 3 Narrow slide unit working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min *Main drice is been changed for SIEMENS SIMODRIVE* more
4

Multislide punching and forming machine Bihler GRM 80

Berkswell, United KingdomUnited Kingdom
5793 km
1983
ready for operation (used)
Bd7qum9iey One used BIHLER GRM80 multislide wire/strip-punching and forming machine, year of mfg 1983, equipped with 5x forming slides and 30 ton eccentric press, gripper feed on right-hand side. Max width of strip 80 mm. Max wire diameter 5 mm. Standard feed length 520 mm. Max operating speed 250 strokes per minute. Air clutch. Weight approx 5000 kgs. **New stock arrival** more
7

Welding control BIHLER B 5000

Grebenau, GermanyGermany
6576 km
2006
excellent (used)
Beptxggbx2 Medium frequenzy Welding control rated power: 100 A welding power: max. 130 kVA more
7
C0pdwcms One used BIHLER GRM80 multislide wire/strip-punching and forming machine, year of mfg 1991, equipped with 5x forming slides and 30 ton eccentric press, gripper feed on right-hand side. Max width of strip 80 mm. Max wire diameter 5 mm. Standard feed length 520 mm. Max operating speed 250 strokes per minute. Air clutch. Weight approx 5000 kgs. **New stock arrival** more
3
equipped with: 1 pce. right hand feeding system 2 pce. slide units working range: Bd3znxneg3 wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min. more
7

Multislide wire/strip punching and formi Bihler GRM 100

Coventry CV7 7DG, UKUnited Kingdom
5794 km
1985
ready for operation (used)
One used BIHLER GRM100 multislide punching and forming machine, Year of manufacture 1985. German origin. Equipped with 4x forming slides and 2x 18 ton press stations, gripper feed on right-hand side with straightener. Max width of strip 100 mm. Max wire diameter 10 mm. Hyl32gr Standard feed length 250 mm max. Max operating speed 135 strokes per minute approx. Air clutch. Approx weight 6000 kgs. Power supply 380/400V, 50 Hz. more
8

Stamping and bending machine BIHLER GRM 80

Grebenau, GermanyGermany dealership location
6576 km
1986
good (used)
equipped with: 1 Coil line 1 Eccentric press 250 kN 4 Normal slides 1 Narrow slide working range: wire diameter range: up to 8,0 mm strip metal width: up to. 80 mm feeding length: up to 520 mm E277iml output: 10 - 250/min more
6

Multislide punching and forming machine Bihler GRM 80

Berkswell, United KingdomUnited Kingdom dealership location
5795 km
1983
used
One used BIHLER GRM80 multislide punching and forming machine, year 1983, equipped with 5x forming slides and 25 ton press station, gripper feed on right-hand side. Yp7l7k Air clutch. Country of Origin Germany. Stanz-Biegeautomat, machine à coulisseaux multiples more
1

Mig Welders CEMONT MX 350 P Mig Welder with wire feed

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
ready for operation (used)
Serial No. P857469 Glvouut Amperage 350 Input 400/3/50 hz Duty cycle 350 amps @ 50% 330 amps @ 60% 280 amps @ 100% Fitted with Cemont TF4XH variable wire feed unit, water cooler, leads & gun Features Mounted on wheels Length 1000mm Width 600mm Height 1500mm Nett weight actual. 170 Kgs. more
4

Excavator Case CX50BS2

More Case Cx 50
Dromore, United KingdomUnited Kingdom
5361 km
2016
excellent (used)
2016 Case CX50BS2 Rubber Tracks, Blade, Offset, QH, Piped Clqwkpv This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Northern Ireland on 13th-14th September. For more information go online. more
2

Bed type Correa Bed type milling machine CORREA A25/50 - 9252316A25/50

Burgos, SpainSpain dealership location
6032 km
1990
ready for operation (used)
Retrofitted: 2019 Numerical control: HEIDENHAIN TNC-320 (¡NUEVO! / NEW!) Technical features Dimensions Table dimensions: 5000 x 1000 mm Number of T slots: 7 T slots dimensions: 22 mm Traverses of axis X axis traverse (mm): 5000 Y axis traverse (mm): 1200 Z axis traverse (mm): 1000 Milling head Head... more
2
Make De Dietrich, Type CE-5000, No 17423, New 1982, Lining material Glass - Enamel (3008), Reactor (1x), Capacity 5445 Ltr, Vessel sizes dia. 1800x2497mm, Dished bottom , Dished top side , Manhole dia. 350x450mm (oval), Top connections 2x dia. 250mm + 3x dia. 150mm, Outlet dia. 100mm, Working pressure vac/6 bar, With jacket (694 Ltr), Working pressure 6 bar, Test pressure 7,8 bar, Max. temperature 200 Degr. C., With propellor stirrer "Impeller", Motor 10,0 KW, 380/660 Volt (Ex), Speed mixing sha... more
8
Control: Heidenhaim iTNC 530 Hjpfpi9 Travel: X-axis 2,500 mm Y-axis 650 mm Z-axis 520 mm Clamping area 3,000 x 600 mm Pendulum operation 2 x 1,025 x 650 mm Table load: 2,000 kg Recording: SK 40 Tool magazine: 30 - tray Spindle speed: 8,000 rpm Rapid speed x,y,z: 45 m/min Accessories - Filter system - Chip conveyor - Partition wall more
1

Schleifscheibenabricht - and roll forming machine Farman FC 250-EX

Cloppenburg, GermanyGermany dealership location
6393 km
2019
ready for operation (used)
Description: Suitable for aligning and profiling diamond and CBN grinding wheels. Technical data: Grinding wheel holder HSK 50 E, diamond grinding wheel diameter 50 - 250 mm, max. grinding wheel width 70 mm, grinding wheel bore diameter 20 mm, speed of the diamond/ CBN disc spindle infinitely adjustable 100 - 1000 rpm, connection value of the motor of the Grinding wheel 1.75 kW, grinding wheel transverse stroke 160 mm, grinding wheel longitudinal stroke 120 mm, radius of the grinding wheel 0 - 6... more
1

Tig Welders KEMPPI Kempotig AC/DC 250 250 Amp Tig Welder

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
ready for operation (used)
Serial No. 6160252 Amperage 250 Oorogymb Input 400/3/50hz Duty cycle 250amp@30% 180amp@60% 140amp@100% Fitted with coolant unit, earth clamp Features mounted on wheels Length 900mm Width 400mm Height 800mm Nett weight actual. 140 Kgs. more
15
Presto, type HPK 50 BSK, Nr. 4, year of construction 2009, drive power 22 kW Technical specifications: Manufacturer Presto Type HPK 50 BSK Year of construction 2009 Press power 50 t Specific press capacity 65 N/cm² Drive power 22 kW Power input 80 A Hours of operation 12363 h Channel cross section 1100 x 700 mm Nobdv Feed channel dimensions 1050 x 1250 mm Filling volume 0,96 m³ Throughput capacity on idle speed 157 m³/h Cycle time 22 sec. Average throughput rates: Density of 3... more
3

Bed type Correa Milling machine CORREA CF25/25 - 625027CF25/25

Burgos, SpainSpain dealership location
6032 km
2004
ready for operation (used)
Retrofitted: 2019 Bqpbc0nu Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 2800 x 1000 mm Number of slots: 5 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mm Y axis traverse: 1000 mm Z axis traverse: 1000 mm Milling head Head type: Universa... more
2
Type BE-2500 HRS (Halb Rohr Schlange), No 36066, New 1992, Lining material Glass - Enamel (WWG-9125), Reactor (1x) make Pfaudler-Werke AG, Capacity 3472 Ltr, Vessel sizes dia. 1600x1200mm, Dished bottom , Dished top side , Manhole dia. 500mm, Top connections (7x), Outlet dia. 100mm, Working pressure vac/6 bar, Test pressure 9,1 bar, Half coil jacketed (150 Ltr), Working pressure vac/12 bar, Test pressure 16,9 bar, Max. temperature -25/+200 Degr. C., With paddle stirrer "Cryo lock", Motor 7,5 KW,... more
4

Shredder ZENO-MASCHINENBAU ZTLL 420x750

Altenkirchen (Westerwald), GermanyGermany
6461 km
2001
ready for operation (used)
ZENO SHREDDER mit Sondertrichter ZTLL 420x750 Beromoepyw Antrieb:7,5 kW. more
2

150/80/10 Tonne Overhead Crane Kone

Paisley, United KingdomUnited Kingdom
5518 km
2019
as good as new (ex-display)
Mt23xexf Kone 150/80/10 ton Overhead Travelling Crane NEW CONDITION Span (Rail Centres) 19,650mm Max Height of Lift 150 ton: 18m Motorized Rotating Hook 80 ton: 19.1m 10 ton: 18.8m 3 Hoist Units: 150 ton, 80 Ton and 10 Ton Radio Control Inverter drives all motions. The crane has just been delivered and tested and has done no work at all!! Contract for which it was bought has been cancelled. Comes with Full Kone warranty more
1

Mig Welders BUTTERS AMT 260 250 Amp Mig Welder

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
ready for operation (used)
Serial No. 8050005 Amperage 250 Input 380/3/50 Duty cycle 250 amps @ 35%, 180 amps @ 60% and 140 amps @ 100% Fitted with mig torch Length 3' 4" Oorxx8ac Width 1' 8" Height 2' 8" Nett weight actual. 160 Kgs (0.16 Tons) more
5
screw size:35 mm injection shot weight in Polysterol:176 g/PS closing pressure:2000 kN daylight:520 x 520 mm opening stroke:max. 650 mm mould height - Max./min.:250 mm Yr2vyo control:Selogica daylight between platens - max.:900 mm total power requirement:46,3 kW weight of the machine ca.:7,2 t dimensions of the machine ca.:5,50x2,10x2,20 m C version IV - LCD colour monitor, colour type - Selogica control unit - technology step 2 servoregulated with 2 regulating pumps - wear resistant plasti... more
7

Bed type Zayer Milling machine ZAYER KF 5000 - 40142KF 5000

Burgos, SpainSpain dealership location
6032 km
1990
ready for operation (used)
Retrofitted: 2019 Numerical control: HEIDENHAIN TNC-355 Technical features Dimensions Table dimensions: 5000 x 1000 mm Be9egg8hjx Number of slots: 7 T slots dimensions: 22 mm Traverses of axis X axis traverse: 4700 mm Y axis traverse: 1000 mm Z axis traverse: 1200 mm Milling head Head type: Univer... more
2
Make De Dietrich & Cie. France, Type AE-2500, No 57949, New 1989, Lining material Glass - Enamel (3009), Reactor (1x), Capacity 3468 Ltr, Vessel sizes dia. 1600x1600mm, Dished bottom , Dished top side , Manhole dia. 350x450mm (oval), Top connections 5x dia. 100mm + 2x dia. 200mm, Outlet dia. 100mm, Working pressure vac/6 bar, With jacket (380 Ltr), Working pressure vac/7 bar, Max. temperature -25/+200 Degr. C., With anchor stirrer , Motor 500 Volt (Ex), Speed mixing shaft variable, Floorspace 2,... more
3

Adhesive binding SOLEMA DRYING STATION 50 (no. 2)

Espelkamp, GermanyGermany dealership location
6446 km
2003
ready for operation (used)
Cooling tower: - Running direction: Straight export clockwise (from top to bottom) Hmycnfk more
5
Make: DIGEP Type: DLB-12/3050 Nobet Built: 1986 Sheet thickness: 12 mm Useful length: 3050 mm Power: 22 kW Dimensions: approx. L 4.10 x W 2.20 x H 2.20 m Weight: approx. 14.5 t Facilities: - Mot. Back stroke - Angular stop - Support arms All information without guarantee. The machine is in very good condition. A demonstration is possible at any time in our exhibition hall. more
4

Sundry Items ESAB LAW 520 500 amp Power Source

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
ready for operation (used)
Serial No. 912 235 8176 Amperage 500 amps Input 380/420/3/50 ac Be0tm2f3h3 Duty cycle 500 amps @ 60%, 435 amps @ 80% and 390 amps @ 100% Length 2'10" / 864mm Width 1'8" / 508mm Height 2'8" / 813mm more
4

Shredders Hammel 850DK Slow Speed Shredder

bt70 3ey, United KingdomUnited Kingdom dealership location
5402 km
ready for operation (used)
Year: 2006 Hours: 9000 Nnkl2 Tipping Hopper Good Tracks Breaker Bar Serviced and ready to work Engine 480hp Weight 30T more
4

Floor type Anayak Milling machine ANAYAK HVM-5000-PHS - 2002HVM-5000-PHS

Burgos, SpainSpain dealership location
6032 km
2002
ready for operation (used)
Retrofitted: 2019 Numerical control: FANUC 21iM Technical features Dimensions Table dimensions: 5.000 x 1.000 mm Number of T slots: 7 T slots dimensions: 22 mm Traverses of axis X axis traverse: 4.300 mm Y axis traverse: 1.200 mm Z axis traverse: 1.500 mm Milling head Head type: Universal Manual B... more
2
Make Technoglass/De Dietrich (vessel/cover), Type AE-2500, No 2804/62331 (vessel/cover), New 1984/1997, Lining material Glass - Enamel, Reactor (1x), Capacity 3510 Ltr, Vessel sizes dia. 1600x1500mm, Dished bottom , Dished top side , Manhole dia. 350x450mm (oval), Top connections (7x), Outlet dia. 80mm, Working pressure vac/6 bar, Test pressure 9,1 bar, With jacket (373 Ltr), Working pressure vac/7 bar, Test pressure 10,4 bar, Max. temperature -25/+200 Degr. C., With paddle stirrer , Motor 5,5/8... more
3

Adhesive binding SOLEMA DRYING STATION 50 (no. 3)

Espelkamp, GermanyGermany dealership location
6446 km
2003
ready for operation (used)
Cooling tower: - direction = Straight export clockwise (from bottom to top) 0ntep3zl more
5

CNC lathe Mori-Seiki NLX 2500Y

Wiesbaden, GermanyGermany
6527 km
2015
excellent (used)
DMG Mori NLX2500Y/700 CELOS M730UM – ERGOline Touch Control Mfg Year 2015 Max. turning diameter 366 mm Max. turning legth 705 mm Barcapacity 80 mm Movements X/Z: 260/795 mm Y-axis: 100 mm +/- 50 mm Max. Spindlespeed: 4.000 U/min Spindlemotor: 15/18,5 kW Spindelnose: JIS A-8 C-axis: 0,001° 20 station turret Bezxzzz8pj Power On: 8.650 h cutting time: 3.600 h more
5

Guillotines / Shearing PEARSON 2500mm x 6.5mm Hydraulic Guillotine/Shear

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
ready for operation (used)
Serial No. 712702/9 Capacity 2500mm x 6.5mm Back gauge Power Rapid blade adjustment Yes Shadow-line Yes Work supports 2 @ 49.1/4" / 1251mm Squaring arms 1 @ 49.1/4" / 1251mm On92rmog Input 380/420/3/50 ac 7.5 hp approx Clamps 10 x Hydraulic Read-out to back gauge Dual Actuated via Wander Type Foot Switch Fitted with Fingerguard Length 10' 8" / 3.25M Width 6' / 1.83M Height 5' / 1.52M Nett weight Actual 3.76 Tons / 3,820 Kilos. more
3

Shredders Hammel 750 Shafts

bt70 3ey, United KingdomUnited Kingdom dealership location
5402 km
ready for operation (used)
Be99bnmc90 more
9

Bridge type Correa Bridge milling machine CORREA FP40/40 - 8950304FP40/40

Burgos, SpainSpain dealership location
6032 km
1997
ready for operation (used)
Retrofitted: 2019 Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 4000 x 1250 mm Number of T slots: 8 T slots dimensions: 22 mm Traverses of axis Nnhrr X axis traverse: 3500 mm Y axis traverse: 2500 mm Distance between columns: 2040 mm Z axis traverse: 1000 mm Milling head ... more
2
Make Romabau AG Weinfelden, Type 2500L, No 20076, New 1975, Material Stainless steel 1.4435 (316L), Reactor (1x), Capacity 3400 Ltr, Useful capacity 2500 Ltr, Vessel sizes dia. 1600x1267mm, Dished bottom , Dished top side , Manhole dia. 500mm, Top connections 2x dia. 400mm, Outlet dia. 80mm, Working pressure vac/3,2 bar, Test pressure 4,8 bar, Half coil jacketed (120 Ltr), Working pressure vac/13 bar, Test pressure 18 bar, Max. temperature 200 Degr. C., With propellor stirrer "Impeller", Motor 5... more
5

Toolholder HANKOOK SK 50

St. Ingbert, GermanyGermany dealership location
6494 km
used
tool taper:SK 50 0uayyfb7 weight: t tool clamping area: mm more
4

Bridge Crane - Single Beam ABUS ELK 5000 kg

Niederlangen, GermanyGermany dealership location
6338 km
2000
used
lifting capacity :5,0 t lift:6000 mm span width:25750 mm speed:10 / 40 m/min 2rhowu weight of the machine ca.:7,62 t total power requirement:8,2 kw more
8

Guillotines / Shearing DARLEY GS 1250x4 1250mm x 4mm Hydraulic Guillotine/Shear

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
1982
ready for operation (used)
Nmykv Serial No. 11868 Capacity 1250 mm x 4 mm Back gauge power Rapid blade adjustment yes Work supports 1 @ 950 mm Squaring arms 1 @ 950 mm Input 415/3/50 7.5 kw Clamps 7 x hydraulic Actuated via wander type foot switch Fitted with rear infra red guarding Equipment finger guard Length 1650mm Width 1800mm Height 1650mm Nett weight actual. 2,150 Kgs/ 2.12 Tons Literature I B in electrical panel more
10

Screeners Rapid Trakmix 250

bt70 3ey, United KingdomUnited Kingdom dealership location
5402 km
ready for operation (used)
The Rapid Trakmix is a track-mounted mobile continuous concrete mixing plant/ pugmill. Trakmix is totally mobile, self-contained, fully weighed and outputs high volumes of up to 250 TPH. The machine has been specifically designed for applications where all types of binders or neutralising powders are required in the mixing process, including road construction, road paving, ground works/civil engineering, environmental stabilisation projects, aggregate recycling and many more. FEATURES The ONLY t... more


bihler grm...
daily

New machines via email!

Stay updated!

to

to

Edit search
BIHLER GRM 50
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.