Used Bihler for sale (45)

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 70 kN 5 Standard slide units 1 Control shaft Working range: wire diameter range: 0,5 - 3,0 mm Iijdpj Aaq Utofx Afush strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Grip feeder system left hand side 1 Eccentricpress 90 kN 3 Narrow slide units 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm Iodpfx As Aarb Iofueih strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, BIHLER Control System P-CNC 3E for BIHLER GRM 80E consist of: Control cabinet complete with SIEMENS SIMODRIVE SIEMENS Motor midel 1PH6137-4NB 40-Z Iiodpfx Afjtqdb Roujh

Condition: used, Year of construction: 2016, functionality: fully functional, Complete medium-frequency resistance welding system, manufactured 2016, consisting of the B 5000 inverter control cabinet (S/N 29636) paired with the Bihler ET 70 welding transformer (70 kVA, S/N 82641). Both units are year-matched and original to each other. MF 5000 digital welding controller with 14" color display, closed-loop current/power/energy regulation, tool management, production data logging (PDE/MDA), and NC axis interface. Frequency adjustable 1,000–5,000 Hz. Original operating manual included. Manufacturer: Otto Bihler Maschinenfabrik GmbH & Co. KG, Type: B 5000 Serial No.: 82641 Year: 2016 Power supply: 400 V, 3-phase, 50 Hz Control voltage: 24 VDC Total connected load: 50 kVA (standard); max. fuse 125 A Inverter frequency: adjustable 1,000–5,000 Hz in steps Short-circuit switching capacity: 6 kA CE marked Welding Transformer — Nameplate Data Type: ET 70.0.G-10000/4 Rated power at 50% duty cycle: 70 kVA Secondary voltage (U₂₀): 4 V, up to 3 V (U₂ₙ), stepped (4 tap positions) Input voltage: 500 V / 1000 Hz Secondary current at 50% ED (Iₙ): 10 kA (rated), cos φ: 0.9 Short-circuit voltage (Uₖ): 5% Ijdpszgw I Aefx Afueih Short-circuit current (Iₖ): 10 kA Cooling flow: 6 l/min Insulation class: F

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, equipped with: 1 pce. gripper feeder system right hand side Iiodpfx Afoz Rx Nbjueh 1 pce. Eccentricpress 70 kN 3 pcs. Standard slide units 3 pcs. Narrow slide unit working range: wire diameter range: 0,5 - 3,5 mm strip metal width: up to 32 mm feeding length: up to 170 mm output: up to 250/min.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Middle frquency welding unit consist of: 1 pce. Welding controller BIHLER B 5000 1 pcs. Welding transformer 130 kVA Welding capacity: 130 kVA Power voltage: 400 V, 50 Hz. Iijdjx I R Hqopfx Afueh

Condition: used, Year of construction: 1971, operating hours: 85,000 h, functionality: fully functional, machine/vehicle number: 20194, working range: 250 mm, feed length X-axis: 170 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 1,600 kg, total length: 2,000 mm, total width: 2,500 mm, total height: 1,800 mm, input frequency: 50 Hz, input current: 8 A, pressing force: 7 t, compressed air connection: 6 bar, table width: 184 mm, For sale is a Bihler automatic machine, year of manufacture 1971, with approximately 85,000 operating hours. The machine is fully functional and in ready-to-use condition. Bihler automats of this generation are renowned for their extremely robust, long-lasting construction and have been successfully used in industry for decades in stamping, bending, and forming applications. Iedpfox Tty Djx Afuoih Despite its age, the machine has proven its industrial reliability and remains economically viable for a variety of applications. A significant advantage is the continued good availability of spare parts, both OEM and aftermarket, ensuring long-term maintenance and support. Ideal for series production, as a replacement or secondary machine, or for simple, robust applications. A live demonstration under power is possible by arrangement.

Condition: ready for operation (used), Year of construction: 1987, operating hours: 70,000 h, functionality: fully functional, machine/vehicle number: 21104, working range: 250 mm, feed length X-axis: 170 mm, overall weight: 1,600 kg, total height: 1,860 mm, pressing force: 7 t, total length: 2,000 mm, total width: 2,500 mm, table width: 184 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 8 A, compressed air connection: 6 bar, Bihler Automatic Machine M35 – Year of manufacture 1987 – 7 t press force – ready for operation For sale is a Bihler automatic machine, model M35, year 1987, in very good and well-maintained condition. The machine features a press force of 7 tons, a compressed air connection with 6 bar, and has approximately 70,000 operating hours. The automatic machine is fully functional and immediately ready for use. Bihler machines are renowned for their robust, long-lasting construction and reliability in industrial applications. The M35 is ideally suited for stamping, bending, and forming operations. Iedpfx Asx Tukqjfusih The machine can be inspected under power in our workshop by prior appointment. Spare parts are still readily available.

Condition: used, Engine and transmission for GRM 80 – according to the previous owner, the transmission was overhauled and has not been used since. ATTENTION!! This offer includes only the engine and transmission! Iedpfezw I Hqjx Afusih

Condition: ready for operation (used), Year of construction: 1979, operating hours: 70,000 h, functionality: fully functional, machine/vehicle number: 24104, working range: 250 mm, feed length X-axis: 170 mm, overall weight: 1,600 kg, total height: 1,860 mm, type of input current: three-phase, pressing force: 7 t, total length: 2,000 mm, total width: 2,500 mm, table width: 184 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 8 A, punching force: 7 t, control cabinet width: 410 mm, control cabinet length: 630 mm, control cabinet height: 1,320 mm, compressed air connection: 6 bar, With 70,000 operating hours, it has certainly seen considerable use, but this is not an unusual figure for machines of this type in industrial operation – many remain productive for years with far higher hours if they are properly maintained. Full functionality is assured – the drive has been replaced once. On the positive side, the machine is fully operational, proven in industrial environments, robust, and there are still many spare parts available for older Bihler machines. Ijdpfxjx Ttb Ue Afujih

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: D06E/8463, Offer Number: D06E/8463 Machinetype: wire and strip bending machine Make: BIHLER Type: GRM100 Constr. year: 1993 wire diameter range: 10 mm Iiedpfeyya Nxsx Afueh width of band: 100 mm feeding length: 250 mm Location: Europe

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, 3 pcs. BIHLER slide units for BIHLER GRM 80 / MC 82 Ijdpfx Afozxt I Aouoih

Condition: used, Drive motor incl. PLC for Bihler MC120. Iijdpfx Afoh Nvn Njuoh

Condition: excellent (used), Year of construction: 1974, Equippment: 1 Gripper feeding system right hand side 1 Eccentricpress 90 kN 3 Standard-slide-units 3 Narrow-slide-units Iiodopq H Upepfx Afujh Working range: Wire diameter range: 0,5 - 3,5 mm Stripmetal width: max. 32 mm Feeding length: max. 170 mm Output: max. 250/min.

Condition: excellent (used), Year of construction: 1995, Control cabinet für Thread forming unit BIHLER GSE 4.1 Iiodpex Rrqisfx Afuoh Thread dimameter range: M 3- M 8 Spindle stroke: max: 15 mm Roduction rate: max. 120/min

Condition: new, Year of construction: 2019, functionality: fully functional, BIHLER cards for BIHLER controls: 1 pce. BIHLER # 800-97-0355.1 1 pce. BIHLER # 800-97-0356.1 1 pce. BIHLER # 800-97-0357.1 1 pce BIHLER # 800-97-0358.1 1 pce BIHLER # 800-97-0465.1 1 pce BIHLER # 800-97-0467.1 1 pce BIHLER # 800-97-0613.1 Isdox U D S Hopfx Afuoih 1 pce BIHLER # 800-97-0614.1 1 pce BIHLER # 800-97-0615.1 1 pce. BIHLER # 800-97-0656.1

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, equipped with: 1 pce. gripper feeder system right hand side 1 pce. Eccentricpress 70 kN 4 pcs. Standard slide units 1 pcs. Narrow slide unit 1 pce. Camshaft working range: wire diameter range: 0,5 - 3,5 mm strip metal width: up to 32 mm Iedpfxeyn Rg As Afujih feeding length: up to 170 mm output: up to 250/min.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 4 Standard slide units 1 Narrow slide units Iodpfx Afjx Tuzcoueih 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Equippment: 1 pce. BIHLER control system P-CNC 200 1 pce. BIHLER Accustic cabine Iodpfewxarqsx Afujih 2 pcs. Grip feeder system right hand side 1 pce. Grip feeder system left hand side 4 pcs. Width slide units (welding press slides) 1 pce Welding sytem BIHLER B 1000 Working range: wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Condition: excellent (used), Year of construction: 1986, plate thickness 5 mm Iijdpjxzk I Sjfx Afujh sheet width 40 mm

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, DC welding unit consist of: 1 pce. Welding controller BIHLER B 10 3 pcs. Welding transformer 1 pcs. Cooler unit Iiodpfjvxkzqjx Afuoh Welding capacity: 3 x 70 kVA Capacity of the transformer 70 kVA at 50 % ED Power voltage: 400 V, 50 Hz.

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit working range: Ijdpfx Afer D N Eqeusih wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Condition: excellent (used), Year of construction: 1973, functionality: fully functional, loading capacity: max. 700 Kg. disc diameter: 1.000 mm coil outside diam. max. 900 mm coil inside diam. 240 - 560 mm Iodpfx Aextp Eyefujih coil width: max. 120 mm

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, equipped with: 1 slide feeding system right hand side Iiedpfx Afotzlzaoujh 1 eccentricpress 250 kN 4 standard slide units 1 narrow slide units 1 cam shaft working range: wire diameter range: 0,5 - 5,0 mm stripmetal width: max. 40 mm feeding length: up to 320 mm outout: up to 135/min

Condition: excellent (used), Year of construction: 1983, equipped with: 1 Feeding system right hand side 1 Eccentricpress 250 kN 5 Slide units working range: wire diamter range: 1,5 - 5,0 mm Isdjvuzvdepfx Afuoih stripmetal width: max. 50 mm feeding length: max. 200 mm output: max 450/min.