used
type pressure bar planer head
Tragkörper aus aluminium
mech. feeder
flight circle diameter 127 mm
internal diameter 35 mm
Schneidenbreite 240 mm
Schneidenanzahl 4 pc.
original price 624,- ?
Ok7c2
located in 97447 Gerolzhofen
Fuel type Remaining
used tail lift
Manufacturer: BÄR Cargolift
Type: BC 1000S4
Nominal load: 1000 kg
Bvq7n2xnpl
Operating pressure: 230 bar
dimension tailgate: approx. 1,8 x 2,5 m
Year of manufacture: 2008
Condition for the conclusion of the purchase is a business/commercial activity of the buyer and the corresponding proof. Please send us a proof of your business/trade activity (e.g. sales tax identification number, trade licence or association or chamber identity card) after completion of the ...
Pneumatic cylinder, compact cylinder
Dwlsx3
-bar Dattenberg: SZD -50/50
-Stroke: 50 mm
-Piston rod: Ø 16 mm
-Dimensions: 60/60/H185 mm
-Weight: 1.1 kg
Bär mixer year of manufacture: 1993
1x large boiler
1x small boiler
1x stop brush
1x small scraper
Capacity 100 l
Power 2900 W.
Standard voltage * 400 V
Net weight 395 kg
H x W x L 1593 x 691 x 1171 mm
Speed ??control 47-257 RPM
Bjjcj7iknb
Phases 3 ph
Inside micrometer
Bcsamtr9jf
screw type
Dimensions: 15 - 30-60-120-240 mm
Planten stirring machine Baer
vessel size: 80 litres
with electric lifting device
B3vmnut
Control system:
Digital control with the following functions:
10 stepless speed
timer
up/down operation (boiler)
pause button
machine in top condition
in addition:
Mechanical lifting tipper in chrome steel
1000 128 Pneumatic cylinder BAR type SZD-32/100,
Available: 3,
Nxfmz
Price per piece: 25,00 € plus tax
Fuel type Remaining
VAT: The price shown does not include VAT.
VAT must be paid as a deposit when exporting outside the EU, ALL DATA WITHOUT GUARANTEE, INTERMEDIATE SALE + IRRUPTURE FORWARDED -
Condition for the conclusion of the purchase is a business/commercial activity of the buyer and its appropriate proof. Please send us a proof of your business/trade activity (e.g. sales tax identification number, trade licence or association or chamber identity card) after completion of the purchase proce...
Pneumatic cylinder, compact cylinder
-bar: SZD-32/50
-Stroke: 50 mm
-Piston rod: Ø 12 mm
-Dimensions: 40/40/H165 mm
-Weight: 0.5 kg
Ebfktvr
A used compressed air refrigeration dryer.
The refrigerant dryer was checked for function by refrigeration engineers before being taken out of service.
Afterwards it has sucked off the 18 kg refrigerant R22 (2 bottles) and disposed of it. All protocols available.
A small amount of nitrogen was then added.
Gladly we can let you fill the dryer with new refrigerant (for example R407C).
!! Sales price is without refrigerant !!
Manufacturer: Sabroe
Model: SV 1010 AB
Type: 50 A
max. volume flow: 55m³/...
FOD BYDGOSZCZ DSLA-50 Planer-Thicknesser
Table length 2400mm
Maximum Working Width mm 500
Used machine yes
Engine power kW 4.6
Supply voltage V 380
Technically efficient yes
Good condition yes
Planing width mm 500
Knife shaft 4
shaft diameter d 130 mm
Location
Gorzów Wlkp.
Conditions of delivery
Cost of delivery
to be agreed
Startup type
to be agreed
Description
B8lm3odh
Planing and graving machine FOD BYDGOSZCZ
Type / Model: DSLA-50
Production Year: 1989
Technical condition: Very Good
T...
Solenoid valve, directional valve, valve terminal, control valve
-Manufacturer: bar, solenoid valve type NM-321-H
-Magnet coil: MA 22
-Price per piece
-Number: 3 Stück
Bkv0bkpbne
-Dimensions: 135/72/H22 mm
-Weight: 0.3 kg/piece
SIR automatic bar feeders are designed to be installed in place of the stock reel of multispindle lathes, simultaneously providing functions of loading, bar feeding, and also remnant recovery management.
Pjbmb
Experience, high precision design, and careful selection of materials ensure feeders in the SIR series are innovative and at the cutting-edge of technology.
An IEMCA patent provides for the simultaneous presence of 4 guide channels of different diameters on the feeder, with the facility t...
1 used Steam boiler
-----
- mounted on frame -
Manufacturer : LOOS, Gunzenhausen
Type : UL - S
capacity : 6.000 kg/h
heating surface approx. : 125 qm
Bxahsps3x9
bish. perm. operating overpressure : 16,0 bar
increased test overpressure : 29,4 bar
year of construction : 2000
equipped with Weishaupt combi burner gas + oil type RGL 60 / 2 - A,
800 - 6100 kW, type 3 LN, oil throughput 110 - 512 kg/h, control cabinet, feed water pump and the existing coarse and fine fittings.
Hydraulic power pack, hydraulic pump, hydraulic pump
-max pressure: 70 bar
-Drive: 55 kw 1470 rpm
-Liter output: 268 l/min
-first pump type: KP42/82 F10JV00
-Second pump type: KP42/100 C1ZXZVG
Qlbtqrt8d
-Hydraulic tank:
-Dimensions: 2200/200/H1400 mm
-Weight: approx. 3500 kg
diameter 35 - max. 65 mm
Guide channels 6
control SPS
max. bar length 3.200 mm
bar material dia. min. 35 mm
bar material dia. max. 65 mm
total power requirement 2 kW
weight of the machine ca. 2,0 t
Vz9yuowc
dimensions of the machine ca. 4,0 x 1,1 x 1,6 m
Multi-Channel-Bar-Feeding-System
BREUNING IRCO - 65.6 196.6
- has been installed at a Mori Seiki ZL 200 SMC
x-travel:2100 mm
y-travel:1800 mm
z-travel:800 mm
table-size:2300x1800 mm
tool adaptor:HSK A63
spindle speed::15000 U/min
V37zab
power capacity:27/31 kW
distance between columns:1840 mm
numbers of positions in the tool changer:32
Rhino 800XL four side moulder
with 6 Spindles
bottom-right-left-top-top-bottom
Feed motor 7,5 KW with inverter 7-36 m/min
All 6 spindles 11.0 KW each with IE-3 energy efficient motors
Special 320 mm working width
50 mm spindles
Outboard bearings on all horizontal spindles
Motors and feed with brakes
Radial CNC controlled adjustment spindles 3 and 5
Infeed table 2 meter
Automatic table lubrication
Pneumatic chip breakers on top spindles
Pneumatic fence on left spindle
Central position of...
1 used steam boiler installation
Fabricate: Viessmann
Type: Turbomat-RN HD 4 t/h
Year: 1998
Steamcapacity: 4.000 kg/h
Max. pressure: 13 bar
Bw9vohrs9e
Complete with appendages, Weishaupt dual fuel burner RGL50, controlpanel, automatic blowdown valve.
Top condition
1 used Steam boiler
-----
- mounted on frame -
Manufacturer : LOOS, Gunzenhausen
Type : UL - S
capacity : 6.000 kg/h
heating surface approx. : 125 qm
bish. perm. operating overpressure : 16,0 bar
increased test overpressure : 28,8 bar
year of construction : 1993
N9rv8xvx
equipped with Weishaupt combi burner gas + oil type RGL 60 / 1 - A,
power 800 - 5800 kW version ZM, oil throughput 115 - 489 kg/h,
control cabinet, feed water pump
and the existing coarse and fine fittings.
Surface planer, dresser, dresser
-Working width: 120 mm
-Table length: approx. 1700 mm
Qkq88moki
-2 knife shaft
max. bar length max. 3.200 mm
bar material dia. 5 - 70 mm
change time ca. 30 sec
Loading Length 3.250 mm
rapid traverse 30 (70) m/min
dimensions of the machine ca. 5,0 x 1,5 x 2,0 m
weight ca. 1,5 t
total power requirement 2 kW
Yr0xjo
Single-Channel bar loading magazine
BREUNING IRCO - SiMag 70.1 R
- incl. misc. feed-channels 13, (23), 33mm
Bar loading magazine for multi spindle automatic lathe, new
Manufacturer: Giovanni Cucchi
Machine type: Bar loading magazine for multi-spindle
Type: CMSP/CMSPF
Design: Side loader as surface loading magazine or bundle loading magazine
CMSP / CMSPF at a glance:
Proven technology - in use for decades
The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any ...
diameter 5- 65 mm
length 1500 mm
Control S7
air pressure - required 6 bar
total power requirement 1 kW
Bp0gswlo
weight of the machine ca. 240 kg
dimensions of the machine ca. 2 x 1 x 1,5 m
x-travel 17900 mm
y-travel 2900 mm
z-travel 2900 mm
clamping surface table 1 10400 x 2540 mm
clamping surface table 2 6000 x 2540 mm
Beom3enxzq
clamping surface table 1+2 , coupled 17000 x 2540 mm
distance table - lower edge spindle 3048 mm
column daylight 2945 mm
spindle motor 2 x 86/70 kW
table load 80 t
diameter of quill 305 mm
quill stroke 380 mm
spindle taper metric 100
total power requirement 370 kW
weight of the machine ca. 260 t
dimensions of the machine ca. 36,6 x 10,5 x 8,1 m
- ele...
Hydraulic power pack, hydraulic pump, hydraulic pump
-double pump
-Max. Pressure: 60/200 bar
-Liter output: 6/24 l/min
-Motor power: 5.5 kW
-Speed: 1445 rpm
-Hydraulic valves
Gtqwr0
-Hydraulic tank
-Hydraulic filter
-Weight: 230 kg
x-travel (5.000 - 40.000) mm
y-travel (1.000 - 4.500) mm
z-travel (1.000 - 1.600) mm
control (Heidenhain/Siemens/ Fanuc)
Main spindle:
turning speed range - main spindle (- 5.000) min/-1
power capacity - main spindel (- 30) kW
max. Torque (350) Nm
tool taper (SK 50/SK 40)
swivellable (+/- 90) °
Tool changer (25 - 380) pos.
rapid traverse (20) m/min
total power requirement - kW
weight of the machine ca. - t
dimensions of the machine ca. - m
CNC - Planer-Type Milling MC - Double Column
MATTE...
Festo DSL-32-25-270-CC-A-S2-B Swivel linear unit 556499 max 8 bar / 120 psi with German manual used 100 % functional
B0e9j9gu
x-travel:2600 mm
y-travel:800 mm
z-travel:800 mm
table-size:2500x1100 mm
tool adaptor:SK 50 DIN 69781
D8hmgsx
spindle speed::6000 U/min
power capacity:18,5/22 kW
distance between columns:1370 mm
numbers of positions in the tool changer:32
Bar loading magazine for multi spindle automatic lathe, new
Manufacturer: Giovanni Cucchi
Machine type: Bar loading magazine for multi-spindle
Type: DBM/DBMF
Design: Surface loading magazine or bundle loading magazine
diameter range: 6-67mm
DB-EVO at a glance:
Proven technology - in use for decades
The material feed of this loader generation is carried out by the machine. Bar loaders DBM/DBMF are mounted on rails, so that they can be easily separated from the machine at any time by unlocking t...
Provisional specification.....
220 X 120mm capacity
2m infeed table
4 spindles
Bottom x 5.5kw
Right }
Left } Single x 11kw for right / left spindles
Bvqcuoqtro
Top x 11kw
Chain drive / spring pressures
6000 rpm x 40mm dia spindles
Feed speeds 6 - 12m/min
Safety cover
Hydraulic power pack, hydraulic pump, hydraulic pump
-Max. Pressure: 80 bar
-Liter output: 22 l/min
-Hydraulic valve
-Hydraulic tank
Qk9d8hvzy
-Hydraulic filter
-Weight: 101 kg
max. bar capacity 32 mm
bar length 3.200 mm
compressed air 6 bar
weight of the machine ca. 0,9 t
0 380 V / 50 Hz
dimensions of the machine ca. 4,0 x 1,0 x 2,0 m
Bly7mjpdoo
Bar Feeder
IEMCA - Boss 332-E 32 N
Field of application: Construction
Oyzdt
x-travel:2500 mm
y-travel:1600 mm
z-travel:800 mm
table-size:2500x1300 mm
tool adaptor:SK 50 DIN 69781
spindle speed::4000 U/min
power capacity:18,5/22 kW
distance between columns:1700 mm
Fofjam7o0
numbers of positions in the tool changer:32
12
+++ OLYMPIA-CRAZERS for immediate sale +++
+++ 35 percent price reduction +++
+++ Unbeatable offer +++
Bfrtdzlpqr
Old price: 3850 Euro
New price: 2500 Euro
1350 Euro discount
Only 1x available
Shipping on request
-----
Short bar loader
Manufacturer: Irco
Type: RBK 10012
Year of manufacture: 2003
bar length: 250 - 1.250 mm
bar diameter: 5 - 100 mm
x-travel:15500 mm
y-travel:5500 mm
z-travel:2000 mm
Bwscvtxfqj
spindle drive:150 kW
tool taper:ISO 60
spindle turning speed - stepless:6-750 U/min
Hydraulic power pack, hydraulic pump, hydraulic pump
-Max. Pressure: 200 bar
-Liter output: 6 l/min per pump
-Drive: 0.55 kW 1360 rpm
-Hydraulic tank
-Number: 5x units available
-Price: per piece
-Weight: 95 kg
M2zmzt
max. bar capacity 32 mm
bar length 3.200 mm
compressed air 6 bar
weight of the machine ca. 0,8 t
0 380 V / 50 Hz
Oeckr
dimensions of the machine ca. 4,0 x 1,0 x 2,0 m
Bar Feeder
IEMCA - Boss 432 32 N
Exhibition compressorYear of construction: 2019Compressor system HOSAsuction capacity approx. 850 l/minFilling capacity approx. 680 l/minExplanation Filling capacity at 6 bar working pressuremaximum pressure 10 barVessel capacity 270 lNo. of cylinders 2No. of compression stages 2VPE 1Dimensions and weightsLength approx. 780 mmWidth/depth approx. 710 mmHeight approx. 1870 mmWeight approx. 170 kgElectrical dataOutput power 5,5 kWConnecting voltage 400 Vphase(s) 3 PhStrom type AC mains frequenc...
x-travel:1600 mm
y-travel:1200 mm
z-travel:800 mm
table-size:1100x1800 mm
tool adaptor:MAS403 BBT 40
spindle speed::15000 U/min
power capacity:27/32,4 kW
Belmg8r9zf
distance between columns:1250 mm
numbers of positions in the tool changer:40
Surface planer with a table length of 2000 mm. 350 mm planing width, 2 cutterblocks.
Hnfk7e2z
Very sturdy design.
Surface planer - Thicknesser
Model Scheppach hmc 3200
year of manufacture 1995
planing width 320 mm
planing height 180 mm
Bxaku0w7kj
passage width 310 mm
jointer table length 1280 mm
Thicknessing table length 590 mm
table height 820 mm
2-blade shaft (HSS)
feed rate 5 m/min.
motor 4,0 kw / 400 V
incl. driving device
4-point mounting for attachments
weight approx. 150 kg
incl. add-on circular saw KSE 250 with sliding carriage
incl. mounted tiller TFE 30 with sliding carriage
Sale only to self-coll...
Surface planer, dresser, dressing machine
-Working width: 450 mm
-Table length: 4200 mm
-4 Knife shaft: carbide
-Dimensions: 4300/1100/H1000
Cb9iaco3
-Transport length: 3300 mm
-Weight: 1030 kg
x-travel 4927 mm
y-travel 2871 mm
z-travel 1083 mm
Gnl2cdovo
Control CNC
turning speeds 600-18.000 U/min
total power requirement / kW
weight of the machine ca. / t
Automatic bar loading magazine for single spindle automatic lathe / short lathe, new
Obd2d
TEST the new DB-EVO bar loader
4 WEEKS, NON-BINDING, FREE OF CHARGE (conditions on request)
very high speeds even with profile material
Manufacturer: Giovanni Cucchi
Machine type: Automatic bar loading magazine for single-spindle / short turning
Type: DB-EVO
Design: Surface loading magazine or bundle loading magazine
diameter range: 20-110mm
DB-EVO at a glance:
Scope of delivery and optionally orderable...
x-travel 4.200 mm
y-travel 1.400 mm
z-travel 850 mm
control Sinumerik 828D Siemens
Main spindle:
turning speed range - main spindle max. 8.000 min/-1
power capacity - main spindel 18,5 / 15 kW
transmission ratio 2
max. Torque - Nm
tool taper ISO 50
work table:
table surface area 3.200 x 1.200 mm
max. table load 8.000 kg
T-slots 7x 22 x 150 mm
distance spindle /table 50 - 900 mm
distance between columns 1.400 mm
distance spindle / column max. 404 mm
Tool-Presetter:
number of toolpositions...