Used Punching And Bending Machine for sale (69,245)

Year of construction: 1987, condition: excellent (used), functionality: fully functional, 1987 Finzer ZUB 250 Multislide Punching & Forming Machine Used 1987 Finzer ZUB 250 multislide machine for sale. 250kN press unit, 6 forming slides, manual decoiler and 250mm feed. Very good condition. Manufacturer: Finzer Model: ZUB 250 Machine Type: Multislide Punching & Forming Machine Year: 1987 Condition: Very Good Machine Description The Finzer ZUB 250 is a heavy-duty mechanical multislide stamping, punching and forming machine designed for the high-volume production of complex components from strip and wire. This machine is equipped with a 250kN / 25-tonne press unit, a set of six forming slides and a manual decoiler, providing a versatile production system capable of combining punching, blanking, bending and forming operations within one production cycle. Multislide technology is particularly effective for components requiring several bends or forming operations from different directions. Compared with conventional single-slide power presses, the multiple independently arranged forming slides allow complex parts to be produced efficiently with reduced secondary operations. Main Specifications Manufacturer: Finzer Model: ZUB 250 Year: 1987 Machine Type: Multislide Punching & Forming Machine / Stamping & Bending Machine Kdedpfjz S T Inox Akpeu Press Capacity: Approx. 250kN / 25 tonnes Number of Forming Slides: 6 Maximum Feed Length: Approx. 250mm Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Forming Slide Capacity: Approx. 30kN per slide Forming Slide Stroke: Approx. 0–50mm Maximum Production Speed: Up to approx. 400 strokes/minute, depending on tooling, component and material Machine Weight: Approx. 4,000kg 250kN / 25 Ton Press Unit The machine incorporates an approximately: 250kN / 25-tonne press station The press operation can then be combined with movements from the surrounding forming slides to produce complex finished components in a continuous cycle. Six Forming Slides This Finzer is supplied with a complete set of six forming slides. The multiple-slide arrangement is one of the main advantages of the ZUB system, allowing tooling to approach the component from several directions during the same production cycle. Forming capacity per slide: 30kN Slide stroke: Adjustable up to approximately 50mm The slides can be tooled for sequential bending, forming and positioning operations. Manual Decoiler Included The machine is supplied with a manual decoiler for coil-fed production. Coil & Strip Feed Capability Comparable Finzer ZUB250 machines are specified with: Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Maximum Feed Length: Approx. 250mm Feed length is typically adjustable to suit the individual component and tooling setup. High-Speed Production Depending on component design and tooling, period ZUB250 specifications quote operating speeds of approximately: 25–400 strokes per minute This makes the Finzer particularly suitable for repetitive, high-volume manufacture where several conventional press and forming operations might otherwise be required. Mechanical Cam-Controlled Multislide System The Finzer ZUB series uses a mechanically controlled cam-driven forming system. Cam-controlled multislide machines are particularly effective for repeat production because the motions of the forming tools can be precisely coordinated with the press and material feed.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, A NELA plate bending machine (printing plate bending device) is a professional bending device for offset printing plates, manufactured by the German company NELA Brüder Neumeister GmbH. These systems precisely shape printing plates into the required form, ensuring a perfect fit into the cylinders of offset printing presses. Compatibility: NELA manufactures bending devices specifically tailored to the requirements of major printing press manufacturers. Models like the HD/Nela SM 102 B, which are optimized for Heidelberg Speedmaster (SM 52, SM 74, SM 102) as well as XL machines, are particularly common. A Heidelberg NELA plate punch (also called a printing plate punch, plate perforator, or hole punch) is an essential precision tool in prepress. It is used to punch register holes or cutouts precisely into offset printing plates. This ensures flawless clamping and perfect alignment (register) of the plates in Heidelberg printing presses. Compatibility: Specifically designed for Heidelberg machine series such as the Speedmaster (SM) 52, 74, and 102. Kdjdpjz It Skefx Akpeu Hole spacing: Flexible configurations with variable hole spacings, such as 425 mm and 780 mm (for Autoplate systems), are common.

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 155196, Sheet metal stamping machine with motor, manufactured in 2018. No longer required due to a change in production processes. Weight approx. 3.5 tons, for sale to the highest bidder. Shipping only possible with payment of shipping costs and prepayment. Kdsdpe Aa I Iwjfx Akpou Sold as is, we assume no warranty or guarantee, no returns accepted.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Magnopro I-Cut 7550” die-cutting machine Item for sale: 1 x Magnopro I-Cut 7550 Kdodpfez I Tguex Akpsu Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A video recording of a functional test will be made for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Year of construction: 1984, condition: good (used), Bihler RM 40 (1984) - Multislide punching stamping bending former Kdodpfx Aeh T Ulyskpou Machine is shown with 5 slides, however, a 6th one is available. Several pay-offs for strip or for wire are available. Machine with 8-tons press and 5 or 6 slides - hydraulic clamping for wire or strip. One machine if fitted with a additionnal feeding system from the back of the machine, thru the center hole

Condition: good (used), Year of construction: 2002, functionality: fully functional, punching force: 20 t, TECHNICAL DETAILS Machine capacity: 200 kN (20 t) Air pressure: 5 bar Air flow rate: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travelling ranges: Machine travel range without repositioning: 1,250 mm x 2,100 mm Processing Max. sheet thickness with ball bearing table: 6 mm Max. sheet thickness with brush table: 3 mm Max. weight per table: 100 kg Accuracy Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Performance Kjdjy Symuopfx Akpodu Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling cycle, feed 1 mm: X920 / Y920 Tools Minimum programmable step: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 2,000 kg, input voltage: 400 V, SENTE Makina TFWSI-1600 HVAC machine, designed for the production of large-diameter ventilation ducts. Model: TFWSI-1600 Pipe diameter range: Ø100 – 1600 mm Material: galvanized steel, aluminum, other sheet metal Material thickness: approx. 0.4 – 1.0 mm (depending on the configuration) Production speed: up to approx. 50 m/min Cutting: pneumatic rotary knife Kdjdez D Ippepfx Akpju Control: PLC with touchscreen panel Power supply: 3-phase Year 2023, as new condition.

Condition: used, Year of construction: 2000, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 9,200 kg, Equipment: safety light barrier, We offer this used TRUMPF Trumatic 2000 R punch machine, year of construction 2000. Maximum punching capacity: 180 kN Type: 9110 Serial number: 700359 Year of manufacture: 2000 Mains supply voltage: 400 V Mains supply frequency: 50 Hz Connected load: 17 kVA Kjdpfx Aez Ak Dijkpsdu Distribution voltage: 400 V Control voltage: 24 V DC Fuse rating: 3 x 35 A Air pressure: 7-14 bar Machine weight: 9200 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire feeder Kdedpeg T S Ttsfx Akpeu Clear text display Press force monitoring Wire straightening device Bosch stripping devices Mounting bracket and brush motor with integrated tool W32/1-32 Soundproof cabin Spool of CU wire with stamped parts Control cabinet Drive power: 7.5 kW Speed (min. - max.): 40-250 rpm Press force / bending slide: 80 kN Press force / punching unit: 200 kN Feed length: 2050 mm Strip width: 50 mm Wire diameter: 6.0 mm Machine weight: 3500 kg Dimensions without electrical components (L x W x H): 3600 x 1500 x 2400 mm Item condition: very good Manufacturer's description, deviations possible. You are purchasing the machine as shown in the pictures. Complete factory closure, large selection of storage platforms, pallet racking, shelving systems, paternoster lifts. High-quality industrial machines, lathes, grinding machines, hand tools. You can find more new and used items in our shop! International shipping costs available upon request!

Condition: like new (used), functionality: fully functional, Sheet Metal Perforating Line – For Sale Complete sheet metal perforating line manufactured by Sacform, suitable for perforating sheet metal and coils up to 1,200 mm wide. The line includes: Decoiler Feeder Perforating press - 1,200 mm width 2 punching dies: Die 1: 3×300 (2 mm hole diameter) Die 2: 1×1,200 (3 mm hole diameter) Pull-through cutting table Recoiler Kjdpfx Aszix Atekpodu

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 2020-09-B970, High-quality compact bending machine Dynobend TM 02 – in top condition, including a large tool kit, for sale. Condition & Inspection • The machine was purchased new directly from the manufacturer Dynobend in 2021 and has been in our possession ever since. • It is used but in good condition (see photos for details). • Inspection is welcome: The bending machine is currently powered on and fully functional. After prior appointment, it can be inspected and demonstrated in operation. Application & Scope of Performance • Focus on solid material: The machine was used almost exclusively for bending solid material. It can also be used for bending pipes (with limited application areas). • Control & Programming: Up to 25 individual bending cycles can be programmed – extremely practical and absolutely sufficient for most applications. • Length stop: o The programmable length stop covers 0 to 1500 mm as standard. o By bending on both sides, workpieces up to 3000 mm can be processed. o Without a direct stop, lengths over 3000 mm are also possible without any problems. Extensive tool kit including additional equipment: • Numerous additional tools were manufactured for the standard tool kit to significantly expand the machine's range of applications (see photos). • The machine will only be sold together with the complete tool kit. Complete documentation available • The sale includes all important and legally relevant documents: • Original EC declaration of conformity (Directive 2006/42/EC, Annex II A) • Acceptance test report • Original operating manual available • Invoices available • The price is ex works (EXW). • Dismantling, professional loading, and transport must be organized by the buyer or carried out by a commissioned freight forwarder. Kodjz Ny Rkepfx Akpsdu • Technical specifications according to the nameplate and available documents. Subject to prior sale.

Condition: used, Engine and transmission for GRM 80 – according to the previous owner, the transmission was overhauled and has not been used since. Ksdpjzw I Hqsfx Akpodu ATTENTION!! This offer includes only the engine and transmission!

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire feeder Clear text display Press force monitoring Wire straightening device Bosch stripping devices Mounting and brush motor with integrated tool W32/1-32 Soundproof cabin Barrel for CU wire with stamped parts Control cabinet Technical data: Drive power: 7.5 kW Speed (min. - max.): 40 - 250 rpm Kedpfxsh I Nrqe Akpedu Press force / stamping unit: 200 kN Longitudinal feed: 250 mm Strip width (longitudinal): 50 mm Wire diameter: 6.0 mm Machine weight: 3500 kg Dimensions without electrical components (L x W x H): 3600 x 1500 x 2400 mm More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 1987, operating hours: 70,000 h, functionality: fully functional, machine/vehicle number: 21104, working range: 250 mm, feed length X-axis: 170 mm, overall weight: 1,600 kg, total height: 1,860 mm, pressing force: 7 t, total length: 2,000 mm, total width: 2,500 mm, table width: 184 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 8 A, compressed air connection: 6 bar, Bihler Automatic Machine M35 – Year of manufacture 1987 – 7 t press force – ready for operation For sale is a Bihler automatic machine, model M35, year 1987, in very good and well-maintained condition. The machine features a press force of 7 tons, a compressed air connection with 6 bar, and has approximately 70,000 operating hours. The automatic machine is fully functional and immediately ready for use. Bihler machines are renowned for their robust, long-lasting construction and reliability in industrial applications. The M35 is ideally suited for stamping, bending, and forming operations. Kedpfxsx Tukqs Akpjdu The machine can be inspected under power in our workshop by prior appointment. Spare parts are still readily available.

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Portal robot MC30 Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bending center P4Xe-3125 Upper bending die LS Lower bending die LI Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Ksdpozh I Iiofx Akpedu Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Additional videos and detailed images of the system are available on request!

Condition: good (used), Brand Boschert Ksdpfxow Hyc Se Akpsdu Model EL 500 Digital Year of construction 2009 Press force 28 tons Throat depth 180 mm Punching capacity 40 mm in 6 mm Worktable size 500x1000 mm Number of strokes 180 pcs Dimensions 2400x1580x1540 mm Weight 2000 kg Power 5 kW

Condition: used, Year of construction: 2007, Amada punch press EMK 3610NT including MP300 loading unit for sale. We would like to sell the machine as a complete package with tooling and a Wilson X-Sharp grinding machine. Kdjdpfxjw Hww Ho Akpeu The standard tools are listed in the attached inventory. I can send it to you via email.

Condition: used, Year of construction: 2022, For sale: a CNC bending press, model FICOM PBH-63T/3200, manufactured in 2022, with minimal usage. The machine was purchased new and has seen very little use. It is currently fully operational and connected to power, allowing for inspection, testing, and trial bends. The machine is available on-site and ready for immediate pickup. We have the technical documentation for the machine. Key information: Kodsz Aiqzspfx Akpsdu Manufacturer: FICOM Model: PBH-63T/3200 Year of manufacture: 2022 Bending force: 63 T Working length: 3200 mm Controller: ESTUN E21 Controlled axes: X and R axes with NC control Equipment and features: ESTUN E21 controller Automatically controlled X and R axes Quick release system for upper tools Linetech Laser Safe laser operator protection system 85° bending punch and die 30° bending punch and die Technical documentation for the machine Two different sets of bending tools allow the machine to be immediately adapted to different bending tasks. If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 308, table width: 850 mm, table length: 1,250 mm, stroke length: 200 mm, bending force (max.): 42 t, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending force: 42 t Kedpfxjz Nipcj Akpjdu Max. bending stroke: 200 mm Table length: 1,250 mm Table width: 850 mm Ram stroke: 300 mm Ram width: 200 mm MACHINE DETAILS Motor power: 4.0 kW Dimensions and weight Dimensions (L x W x H): 1,500 x 2,500 x 1,800 mm Unladen weight: 1,000 kg EQUIPMENT Documentation CE marking

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Kdsdpfxewk Rlxo Akpju Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: not inspected (used), functionality: unexamined, Year of construction: 1994, machine/vehicle number: 7099, overall weight: 2,000 kg, total length: 5,600 mm, total width: 700 mm, total height: 1,600 mm, TRANSFLURID DB 2060 pipe bending machine - Bending capacity: 20 - 60 mm Kjdsz Sprcepfx Akpedu FCA D-35614 Aßlar - loaded onto a truck.

Condition: ready for operation (used), Year of construction: 1979, operating hours: 70,000 h, functionality: fully functional, machine/vehicle number: 24104, working range: 250 mm, feed length X-axis: 170 mm, overall weight: 1,600 kg, total height: 1,860 mm, type of input current: three-phase, pressing force: 7 t, total length: 2,000 mm, total width: 2,500 mm, table width: 184 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 8 A, punching force: 7 t, control cabinet width: 410 mm, control cabinet length: 630 mm, control cabinet height: 1,320 mm, compressed air connection: 6 bar, With 70,000 operating hours, it has certainly seen considerable use, but this is not an unusual figure for machines of this type in industrial operation – many remain productive for years with far higher hours if they are properly maintained. Full functionality is assured – the drive has been replaced once. On the positive side, the machine is fully operational, proven in industrial environments, robust, and there are still many spare parts available for older Bihler machines. Kedpfsx Ttb Uex Akpedu

Condition: good (used), Year of construction: 2006, operating hours: 47,962 h, functionality: fully functional, type of input current: three-phase, overall weight: 18,000 kg, input current: 40 A, input frequency: 55 Hz, input voltage: 380 V, Equipment: safety light barrier, We are selling: a well-maintained Amada punching and nibbling machine, used only for thin sheet metal applications. Maintenance was performed by AMADA. Kdedpfxez R Atqs Akpou Without tooling. The machine is being sold due to a new investment. The buyer must dismantle and collect the machine in DE-84051 Mettenbach. The machine can be inspected in operational condition in DE-84051 Mettenbach by appointment. Sale only to commercial customers and with the exclusion of any warranty!

Condition: used, total length: 2,100 mm, total width: 1,000 mm, total height: 2,450 mm, Colour: White Empty weight: 4.600 kg Iron worker, punch press and section shear  Including Length-Stop Hersteller: Mubea / Muhr & Bender Type: Hydraulic Type: KBLH 1000 Capacity: 110 ton Shear plate: 200x26mm, 500x20mm Notching: 85x75x16mm Ksdpj Aatr Ujfx Akpjdu Throat: 510mm Machine-weight: 4600kg - Documentation available: Yes - Drive system: Conventional - Drive: Hydraulic - Punching force [ton]: 110 - Punch throat depth [mm]: 510 - Notching width [mm]: 200 - Shearing width [mm]: 500 - Max. plate thickness shearing [mm]: 2.5 - Options: Length stop - Transport dimensions: 2100mm x 1000mm x 2450mm (l x w x h) - Transport weight [kg]: 4600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1986, plate thickness 5 mm sheet width 40 mm Ksdpsxzk I Ssfx Akpjdu