Used Bar Loader for sale (24,046)

Year of construction: 2001, condition: used, volt 200 V KW 2 KW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as prior sale reserved! Hsdpfxjvdt Udj Aacsfn

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: MS0003-000018, turning length: 320 mm, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, tool length: 120 mm, tool diameter: 16 mm, number of slots in tool magazine: 24, TECHNICAL DETAILS Control: Fanuc 31i-A Max. machining diameter: Ø 32 mm Max. machining length without re-clamping: 320 mm Gang tool holder - Max. front drilling/tapping: Ø 13 mm / M12 Max. drilling/tapping: Ø 8 mm / M6 Max. back drilling/tapping: Ø 10 mm / M8 Tool configuration Max. number of mountable tools: 24 Turning tools: 6 pcs Front machining tools (drilling): 4 pcs Cross machining tools: 4 pcs Deep hole drilling tools: 2 Hfodswcn Eyspfx Aacsn Back machining: 4 + 4 Tool size Turning tool holder: 16 x 16 x 120 mm Sleeve: Ø 25 mm [front tool holder Ø 32 mm] Spindle and Axis data Main spindle speed: 8,000 rpm Cross tool speed: 6,000 rpm Sub spindle speed: 8,000 rpm Rapid traverse: 32 m/min Main/sub spindle indexing: 0.001° Center height: 1,060 mm Chuck & guide bush Main/sub spindle chuck: TF37 Guide bush: TD32S Mandrel for front, back and cross tools: ER16 [front tool holder ER20] Motors & drive Main spindle motor: 5.5 kW / 7.5 kW Sub spindle motor: 2.2 kW / 3.7 kW X1, Y, Z1 axis motor: 1.0 kW X2, Z2 axis motor: 1.0 kW Cross tool motor: 1.0 kW Rear tool motor (rotating): 1.0 kW Coolant pump motor: 0.4 kW MACHINE DETAILS Energy requirement: 22 kVA Coolant tank capacity: 180 L Machine dimensions (L x W x H): 2,630 x 1,300 x 1,800 mm Machine weight: 3,500 kg Bar loader: Top Automazioni Record

Year of construction: 2008, condition: excellent (used), Max. bar diameter 65 mm Hfedpfx Asin Hkmjacjn Max. bar length 3000 mm

Condition: ready for operation (used), Year of construction: 1990, operating hours: 19,782 h, functionality: fully functional, machine/vehicle number: 80 763, turning length: 350 mm, turning diameter over cross slide: 190 mm, turning diameter: 350 mm, spindle motor power: 11,000 W, spindle speed (max.): 6,300 rpm, spindle bore: 55 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, overall weight: 3,200 kg, spindle diameter: 80 mm, center height over cross slide: 220 mm, power: 23 kW (31.27 HP), Equipment: documentation/manual, rotational speed infinitely variable, Boley BDN 160 R-ZB Sinumerik 3TT basic version 4C Two-spindle CNC lathe with C-axis machining Main and counter spindle (6300/3000 /min) Space for 16 tools Driven tools Coolant lubrication Hedpfxervg Rdj Aacsfn Parts ejection onto conveyor belt Various tool holders Manual/documentation Boley tool holder Special design for 0°, 90°, 180° tool measuring range Size: VDI 20 Setting gauge according to VDI 3425 sheet 2 Ø 20mm for checking the adapter zero point Bar feeder from IRCO IRCO electric feed with oil flow and integrated material slides Material pusher Ø 7, 11, 15, 19, 22, 26, 30, 34, 38, 42 For 3 m bar stock Tool presetter from KOMEG TH 320 Measuring range: X-axis Ø 230 mm Z-axis length 310 mm Transmitted light projector With integrated focusing Projector screen Ø 150 mm Magnification 20:1 Control KOMEG System metama type T1000 Machine can be inspected under power Removal must be organized by buyer, assistance will be provided. Conditions should be inspected beforehand, pictures can be provided if required. Please submit a price

Condition: used, _____ Description: Year of manuf. : 2005 In General: Technology:Multi-channel loading magazine Hsdevr Azispfx Aacefn Number of guide channels:8 pieces Sizes:14/20/26/32/37/42/47/52 mm Number of workpiece slides:8 pieces Diameter of the bars:10-50 m Bar length:3,000 mm Spindle height:1,055 - 1,200 mm Interface:Gildemeister : Attention:Loading magazine 2024 overhauled. Interface adaptation:Possible to machine interface.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, total width: 1,350 mm, total length: 7,210 mm, overall weight: 4,000 kg, Round bars diam. Min. 15 mm Round bars diam. Max. 80 mm Hexagonal bars key min. 15 mm Hexagonal bars key max. 65 mm Min. bar length 1200 mm Max. bar length 6,100 mm Max. feed speed 30 m/min – 500 mm/ sec Hodpfjvi Eypox Aacsfn Max. cut length 300 mm

Condition: used, Year of construction: 2000, Article: loading magazine for Schütte AG20 Manufacturer: Pietro Cucchi Type: surface loader year of construction: 2000 for bar length 3000mm Hfjdpjiqhk Asfx Aacen Please, contact us for getting more information and pictures on mail(at) or *

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: L220M0165, turning length: 510 mm, turning diameter: 250 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 550 mm, Maintenance of the machine in 2024 for €10,000 TECHNICAL DETAILS Control: CNC Fanuc I Series Hjdpfx Aowcnubsacefn Turning diameter over bed: 250 mm Max. machining diameter: 250 mm Max. turning length: 510 mm Spindle Spindle bore: 53 mm Spindle speed: up to 6,000 rpm Drive power: 12 kW Axes X-axis travel: 175 mm (160 mm + 15 mm) Z-axis travel: 550 mm Tool carrier Turret: 12-way Driven tools: All 12 stations MACHINE DETAILS Machine weight: 4 t Rated power: 23.68 kVA Part counter: 1,313,733 Control switch-on time: approx. 53,000 h EQUIPMENT - Tailstock - Bar loader LNS Turbo

Condition: used, Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release. These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode. The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping sleeves of the magazine are changed. The centering unit adjusts itself to the new diameter by itself. It dampens all kinds of vibrations during machining (suitable for round, square and hexagonal material!) and prevents the bar from forming an arc in the channel. This allows very high speed machining (even with larger diameters). Quick changeover to the next diameter to be machined and a significant reduction of vibrations, due to the proven double centering, are only two of the many advantages of this system. The advantages of CMSP/CMSPF barfeeders at a glance: - short loading time Hedpsft Ti Tsfx Aacefn - optimal guiding of the bar material by double or, if necessary, triple centring device - no oil flooding - dry running - quick change of the diameter to be machined - short design - space saving - very low wear of the guide channel - self-adjusting centring device - significant reduction of vibrations Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2025, Manufacturer: Giovanni Cucchi Machine type: Automatic short bar loading magazine for single-spindle / short turning Type: DB-EVO70C Design: Surface loading magazine diameter range: 20-70mm The advantages of DB-EVO barfeeders at a glance: - oriented loading of the bar material possible (e.g. edge upwards) Hfodpjwml Dusfx Aacsn - dry running - no oil flow - significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel - very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles) - short remaining pieces, as no clamping sleeve is used - very short charging time (charging process still during machining) - solid construction - very low wear of the guide channel - external loading - therefore no stop for new bars necessary, low power consumption (start/stop function) Please, contact us for getting more information and pictures on mail(at) or *

Condition: new, all stainless steel discharging height ± 1.770 – 2.250 mm chain break system 400V – 50 Hz Motor 1.1 kw Hsdpfovt Ai Nsx Aacjfn mobile

Condition: used, Year of construction: 2010, Please contact Theo Lelie for more information Hjdev D Ebvjpfx Aacjfn

Condition: used, Year of construction: 2006, functionality: fully functional, BARGSTEDT LOADER BARGSTEDT TURNER (front side/back side) WEEKE THROUGHFEED DRILLING PROFI LINE BHH 35 Hfsdswrdg Ejpfx Aacjn WEEKE THROUGHFEED DOWEL INSERT BST 100 BARGSTEDT UNLOADER

Condition: used, axle configuration: 3 axles, first registration: 10/1992, Year of construction: 1992, Axle configuration Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Hfsdpfx Aaexk Ulmecon Rear axle 3: Max. axle load: 9,000 kg Dimensions Width: 247 cm Weights Unladen weight: 15,160 kg Payload: 29,840 kg Gross vehicle weight (GVW): 45,000 kg Functional Extendable body: Yes Maintenance APK (technical inspection): valid until 01/2026 Further information Please contact Gert Woudenberg for more information.

Condition: used, overall weight: 30,000 kg, maximum load weight: 23,850 kg, axle configuration: 3 axles, loading space length: 7,900 mm, loading space width: 2,500 mm, first registration: 10/2010, next inspection (TÜV): 11/2025, total width: 2,550 mm, total height: 3,330 mm, Equipment: ABS, Loading bed: 4790mm, can be widened to 3000mm, foldable extensions, rear slope: 950mm, raised bed: 2160mm, front slope 250mm, loading bed height: approx. 830mm, hydraulic ramps that can be moved sideways (LxW) 2800x700mm, 6 x heavy-duty lashing rings per side, 8 x lashing brackets per side, 1 x rotating beacon, extendable warning signs, ABS, SAF axle(s), drum brake system, air suspension, vehicle can be covered with advertising and/or labeled Hfodpfxsvxc Tls Aacon Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this property. Please contact us!

Condition: used, axle configuration: 3 axles, first registration: 03/2018, * Hydr. loading ramps Hfjdpfsxiur Rjx Aacsn * Steering with remote control * 3 steered axles * Bed adjustable hydraulically * Winch with remote control * Storage boxes (drawers) * Air suspension * Unladen weight: 14,100 kg -----Internal vehicle number: 11392---- Errors & prior sale excepted

Condition: new, overall weight: 48,000 kg, maximum load weight: 36,134 kg, axle configuration: 3 axles, loading space length: 15,440 mm, loading space width: 3,150 mm, Year of construction: 2025, total width: 2,550 mm, Equipment: ABS, Kässbohrer Extendable Low Loader K.SLA 3 / 1N - 18 / 30 Premium Heavy-Duty Trailer for Demanding Transport Tasks Available Immediately!----General Information Manufacturer: Kässbohrer * Model: K.SLA 3 / 1N - 18 / 30 * Design: Extendable Low Loader * Registration Country: Germany * Chassis Color: RAL 3020 Traffic Red * Location: Achstetten (DE) ----Dimensions & Weights * Overall length: 13,190 mm * Platform length: 9,240 mm * Extendable: +6,200 mm (up to over 19 m total length) * Width: 2,550 mm + 600 mm side extensions * Coupling height: 1,250 mm * Platform height: 875 mm * Unladen weight: approx. 11,866 kg (± 3%) * Gross vehicle weight rating: * 52,800 kg (60 km/h) * 48,000 kg (80 km/h) * Kingpin load: 18,000 kg ----Chassis & Technology * 3x BPW axles with air suspension and drum brakes * Total axle load: 30,000 kg * 1st axle liftable (manual) * Steering: 2 rigid front axles, 1 rear trailing axle * Tyres: 245/70 R17.5 M+S & 3PMSF, incl. spare wheel holder * Rims: Steel (offset) * Load gauge ----Braking & Electrics * WABCO EBS 4S/3M, ABS, RSS (UN ECE R13) * 24V LED side marker lights, Aspöck-Nordic tail lights (ADR-compliant) * Connections: 2x 7-pin + 1x 15-pin, NATO sockets ----Body & Equipment * Frame: high-strength steel S700 MC according to ISO 1726 * Floor: 45 mm hardwood, chequer plate over wheels * Rear: 500 mm, angled at 10° * Ramps: hydraulically sliding, 2,750 x 850 mm, hardwood floor, 40 t capacity * Front wall: steel; Side and rear walls: aluminium * Toolbox (700 x 400 x 360 mm, steel) * Amber beacon, work light, reverse warning * LED warning panels, wheel chocks * Ramp lock tensioning chain & container locks (20–40 ft) ----Load Securing * Lashing rings: * 12x (10 t) * 16x (5 t) * 12x (8 t) * Stake pockets: 16 pieces (52 x 102 mm) * Container locks for various ISO sizes * Yellow reflector tape according to ECE R48 ----Special Features * High-quality, rugged heavy-duty trailer * Versatile: extendable up to over 19 m total length * Ramps suitable for construction and machinery transport * Comprehensive securing options for containers and heavy loads * Robust construction, long-lasting steel frame Hodpfx Asxitbkeacefn For further information, please do not hesitate to contact us.

Condition: used, overall weight: 219,000 kg, maximum load weight: 175,620 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8 units of hydraulic BWP pendulum axle assemblies with remote control. Technically permissible gross weight 219,000 kg Technically permissible payload 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed heavy-duty trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator low-bed section up to 5 meters, featuring 4 wheel recesses, ABS, technically permissible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck type STH/ST Year of manufacture: 2002 Can be combined with heavy-duty module undercarriages, drivable loading platforms. Unladen weight approx. 5,900 kg Permissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" pin Removable aluminum side walls Fully hydraulically adjustable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty module First registration: 14.11.2001 As a single module, technically permissible total weight: 108,000 kg, technically permissible axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendulum axles, 24 wheels, tire size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into chassis: hydromechanical dual-circuit all-wheel forced steering with a maximum aggregate steering angle of 60°, integrated hydraulic oil tank Optimized bolt-lug coupling at front and rear for longitudinal combinations Single-tired pendulum axle assemblies with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles BPW axles with drum brake and ABS, technically permissible axle load of 34 t at 5 km/h 3rd module: Extendable low-bed heavy-duty module - Excavator bridge Year of manufacture: 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with drive-on module at the front Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in low-bed and 175.6 t in overall STHP8 (3+5) module possible. Unladen weight 11,900 kg Front and rear hydraulic bolt-lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty module First registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tired hydraulic pendulum axle assemblies with 4 wheels per axle line, 20 wheels (tire size 285/70 R 19.5) Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the configuration. For the special low-bed combination, a current manufacturer's certificate from Goldhofer is available. The low-bed trailer can be tested at our facility. Price NET excluding 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Hfjdpfxoxcdf Ho Aacon

Condition: used, overall weight: 48,000 kg, empty load weight: 14,100 kg, maximum load weight: 33,900 kg, axle configuration: > 3 axles, first registration: 11/1999, suspension: air, color: green, tire size: 235/75 17,5, Year of construction: 1999, tire condition: 50 %, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 68574 Faymonville, Flatbed Trailer * Year of manufacture: 1999 * Air suspension * Steering axle * Forced-steered axle * Compressed air coupling head (red + yellow) * Connection plug: 2x7-pin * Lift and lower device * Extendable - telescopic semi-trailer * Suspension: Air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload: 33,900 kg * Permissible total weight: 48,000 kg * Axle manufacturer: SAF * Tyre condition, 1st axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre condition, 2nd axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre condition, 3rd axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre size: 235/75 R17.5 * Manufacturer: ES-GE * Extension faulty * Steering axles not functional * Mobile Disclaimer: Subject to alterations, prior sale, and errors excepted. Hfodpfx Aasv Rvgcjcen More photos and videos are available on our website. Our comprehensive services include, for example: * Purchase/sale/rental of commercial vehicles * Fast and hassle-free financing * Arranging all (export) documentation * Order of export/customs number plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections, registration services * Transfer/transport of commercial vehicles Contact our trained staff for advice—we are happy to assist you.

Condition: used, overall weight: 69,800 kg, maximum load weight: 53,680 kg, axle configuration: > 3 axles, first registration: 08/2016, Internal vehicle number: VTC20031 German vehicle Available immediately at our yard in Kaufungen - Kassel For more information, contact Luis Lucena 1st axle is steered and liftable 3rd and 4th axles with forced steering Extendable by 2,900 mm Length: 12,600 - 15,500 mm Hydraulically extendable width: 2,540 - 3,200 mm Wheel recesses Hfjdow Nug Aopfx Aacon Unladen weight: 16,120 kg Max. permissible weight: 65,000 kg (57,000 kg in Germany) Financing example: * Internal no.: VTC * Purchase price: €64,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €1,016.49 * Final residual value: €12,980.00 If you are interested in this offer or would like it adjusted to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors excepted. We are happy to accept your used vehicle as a trade-in. Financing directly with us possible. GOLEC Commercial Vehicles GmbH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, overall weight: 42,000 kg, maximum load weight: 32,200 kg, axle configuration: 3 axles, loading space length: 12,850 mm, loading space width: 2,540 mm, first registration: 05/2012, total width: 2,540 mm, Equipment: ABS, Extendable trailer with extension from 6,800 mm to 20,010 mm overall length, extendable to 3,000 mm width, 3rd axle - self-steering axle, low-bed approx. 9,010 mm, loading height: approx. 870 mm, gooseneck: approx. 3,060 mm, 10 heavy-duty lashing rings per side, 8 stake pockets per side, container locks for 2 x 20', 1 x 30', 1 x 40' container / pre-equipment, landing gear, 2 foldable rear supports, continuous underfloor toolbox, ABS, EBS, SAF axles, drum brakes, air suspension with lift-lower device, vehicle may feature advertising films and/or lettering. Hfodpfxsxcduze Aacsn

Condition: used, overall weight: 46,000 kg, maximum load weight: 33,525 kg, axle configuration: > 3 axles, first registration: 04/2008, Year of construction: 2008, Equipment: ABS, Manufacturer Kel-Berg / Faymonville Model 4 akslet 3 m Udtræks Maskintrailer Year 2008 Condition Good Serial Number SKBE58S407KE12547 Ref. nr. 7972 Reg. date: 30-04-2008 Last seen: 27-01-2025 Drum brake: ? ABS: ? Rear axles: SO F Suspension: Air Tire Size: 235/75R17,5 Cover% left 30-50% Toolbox: ? Total weight: 46000 Kg Net weight: 12575 Kg Hfodpfxsxa Tdmo Aacon Load capacity 33425 Kg Inside length: 8.75m / 12.10m Extraction: 3 m Forced steering axles: 3+4 Hydraulic ramps: ? Hydraulic rear support leg: ?

Condition: used, overall weight: 219,000 kg, maximum load weight: 175,620 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter Hedpfxsxcdfgj Aacjfn 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: used, overall weight: 30,000 kg, maximum load weight: 23,150 kg, axle configuration: 3 axles, loading space length: 8,210 mm, loading space width: 2,500 mm, first registration: 04/1999, total width: 2,500 mm, total height: 3,050 mm, Technical possible loads: Payload 23,150 kg, gross weight 30,000 kg, axle loads (front/rear) 10,000 / 20,000 kg. Loading bed: (L x W) 5,105 x 2,500 mm, extendable to 3,000 mm, folding extensions, raised deck height 1,600 mm, rear incline 990 mm, front incline 515 mm, wooden plank floor, 5 lashing rings per side, 2 lashing pockets per side, 4 stake pockets per side, hydraulically operated, laterally adjustable, split loading ramps (L x W) 3,730 x 715 mm, drawbar with swivel heavy-duty towing eye, GIGANT axle(s), drum brake system, leaf suspension. The vehicle may be wrapped or labeled with advertising. Hfedpfx Aasw U Ic Uocen Our offer generally does not include new MOT (TÜV) approval. If a new MOT inspection is required, we are happy to provide a quotation through our partner workshops! The vehicle may be wrapped or labeled with advertising. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this item. Please contact us!

Condition: used, overall weight: 39,000 kg, maximum load weight: 26,500 kg, axle configuration: 3 axles, loading space length: 13,030 mm, loading space width: 2,600 mm, first registration: 06/1994, total width: 2,600 mm, total height: 4,000 mm, Equipment: ABS, Loading bed: 8,620 mm, rear slope: 450 mm, width: 2,600 mm, width: 3,111 mm with extensions, extendable and/or foldable extensions, gooseneck: 3,960 mm, loading bed height: approx. 880 mm, hydraulically lateral adjustable loading ramps (LxW) 2,900 x 830 mm, electric hydraulic pump, cable remote control, 2 heavy-duty lashing rings per side, 5 stake pockets per side, extendable warning signs, central lubrication system, support winches, three axles hydraulically force-steered, drum brake system, air suspension, rotating beacon, reversing lights, vehicle may be equipped with advertising stickers and/or lettering. Hjdow Sca Aopfx Aacefn Our offer is generally without a new technical inspection (TÜV). If a new inspection is required, we are happy to provide a quote from our partner workshops! The vehicle may be fitted with advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to provide financing or leasing options for this item. Please contact us!