Used Soldering for sale (92)

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software 2D Inspection and Repair option Guodpfx Aszlx E Tecgei SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors

Condition: used, functionality: fully functional, Year of construction: 2010, total length: 3,590 mm, total width: 1,432 mm, total height: 1,478 mm, overall weight: 870 kg, We offer this ready-to-use Rehm VXS basic 2100 (Type 422) reflow oven for SMT/re-flow soldering, manufactured in 2010. - Manufactured in 02/2010, put into operation on April 16, 2010 - Special shortened version, 7 zones: 4x preheating, 2x PEAK, 1x cooling - Operated in a single-shift mode from 04/2010 to 07/2021 (approx. 11 years), has been out of operation since then - Regularly serviced and cleaned; only one service intervention during the entire operating period (repair of the transport trolley, 06/2016) - Dimensions: 3,590 × 1,432 × 1,478 mm (L × W × H, ±50 mm) - Purchased as new directly from Rehm (original purchase price approx. 1.43 million CZK) - Data sheet and operating records available for viewing/download Godoz Hnz Ropfx Acgjui - Inspection and collection: Bonnel Technologie s.r.o., Wolkerova 2304/38, Cheb, Czech Republic (near the Bavarian border) If you have any questions or require further information, please feel free to send us a message or contact us by phone.

Condition: used, functionality: fully functional, Year of construction: 1987, Swivel bending machine / sheet metal bending machine, Thalmann TACO 15-4.2, with a working length of 4.2 m. Technical data: - Manufacturer: Thalmann Konstruktionen AG - Model: TACO 15-4.2 Meter - Machine type according to nameplate: THAKO 15-4.2M - Working length: 4.2 m - Year of manufacture: 1987 Condition: used, functional. Location: Innsbruck (Tyrol). Inspection and collection by appointment. Sold on behalf of a customer. Gusdpo Ait Iyjfx Acgji

Condition: good (used), Year of construction: 2014, Design: 2-chamber system Max. assembly size (batch): 550 × 540 × 80 mm Process medium filling volume: approx. 20 kg (does not contain Galden) Heating power, steam phase: max. 7.8 kW Average power consumption: approx. 3.1 kW Cooling water requirement: approx. 3 l/min Touchscreen operation Soft Vapor Temperature Control (SVTC) Intelligent Profiling System (IPS) Suitable for lead-free and lead-containing soldering processes Optional equipment: special RAL 7035 paint finish, multilevel mode, signal lamp, 2 measuring channels, measuring adapter. Gujdpoz Dxfbjfx Acgji Integrated cooling unit

Condition: used, Year of construction: 2016, The DT-250 series is a hot-bar/ACF bonding machine, intended for connecting flexible circuits, PCBs, and displays, among other applications. The DT-250 features a manually operated 2-position front/rear slide with approximately 200 mm of travel. Manufacturer: Unitek Eapro B.V., Helmond, Netherlands Type: ACF DT-250-GH Serial number: 0620905 Year of manufacture: 2006 Power supply: 230 V Current: 6.3 A Phase: 1-phase CE marking Type: ACF DT-250-GH Serial number: 0620905 Year of manufacture: 2006 Power supply: 230 V Current: 6.3 A Phase: 1-phase CE marking Property Specification Type DT-250 Technology Pulsed Heat / Hot Bar Application ACF bonding / heat-seal bonding / reflow Slide Manual, 2 positions Travel 200 mm Bonding head SH500 Maximum force 30–500 N Pneumatic operation Yes Air pressure 4–8 bar Gjdpfxjzzau Uj Acgeui Thermode temperature up to approx. 600 °C Temperature control Uniflow pulsed heat Workpiece/fixture up to approx. 160 × 160 mm

Condition: used, Year of construction: 2009, Max. PCB dimensions: 457x508mm, edge clearance top/bottom: 3mm, component clearance top: 90mm, bottom: 40mm, extended component clearance top: 190mm, supported applicators: AP nozzle diameter (standard): 2.5-16mm, extended AP nozzle diameter: 2.5-20mm, micro nozzle diameter: 1.5-2.5mm, jet tip nozzle diameter: 6-20mm, max. jet wave nozzle width: 25mm, height without signal tower: 1403mm, length: 1351mm, width: 1000mm. Equipment: manual loading, Drop Jet Fluxer with Dual Control System, titanium solder pot for up to 10kg of solder, motor control for X-, Y- and Z-axes, automatic solder replenishment (solder wire) and solder wave height detection, teach-in camera, Top-Side Preheat (upper heating with 4 segments, closed-loop temperature control), process camera, automatic solder feeding with solder level detection, Auto Fiducial System, Pillarpad offline programming software, machine refurbished in 2022, software upgraded to Windows 10 and new PH software. With PILLARHOUSE PILLARGEN-40 nitrogen generator, year of manufacture: 2022, 40l/min at 50ppm residual oxygen, with communication interface to the soldering system, air drying module and oil separator. An on-site inspection is possible. Gujdpfx Aco Ah Ty Hjgji

Condition: good (used), Specification ASSCON Quicky 450 Type Batch vapor-phase soldering machine Maximum PCB/workpiece size 450 × 450 mm Maximum component height 50 mm Soldering temperature 100–260 °C Supply voltage 230 V / 50 Hz Connected power 3.5 kW Average power consumption at full load 1.5 kW Medium filling (Galden) 2 kg Guedpe Afy Eqjfx Acgsi Standard cycle time approx. 6 minutes Dimensions (w × d × h) 600 × 635 × 1,135 mm Weight approx. 180 kg

Year of construction: 2015, condition: ready for operation (used), Two Rehm reflow soldering ovens for the printed circuit board industry are available. 1) Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kThree Rehm reflow soldering ovens for the printed circuit board industry are available. 1) 2x Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kW, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026.W, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026. Gsdpfjzghf Ejx Acgjui

Year of construction: 2012, condition: used, A Atf selective soldering system in need of repair is offered. Process area: 350x250mm, extraction capacity: 200m³/h, power/capacity: 400V 50/60Hz. Machine dimensions X/Y/Z: approx. 1560mm/1375mm/1060mm, weight: approx. 380kg without solder. With spray fluxer, temperature sensor and nitrogen equipment. The Z-axis loses its reference position after repeated operation. Inspection by appointment is possible. Gusdpfx Acozwpglegei

Condition: used, Year of construction: 2010, A reflow soldering oven with nitrogen operation is offered. Power: 70kW. Nitrogen consumption: approx. 21m³/h. Cooling: 20l/min at min. 2bar. Exhaust air: 400m³/h. Inspection possible by arrangement. Guedpfx Aj Ahq Nkjcgei

Condition: good (used), functionality: fully functional, Double wave Preheating Godpfxez Hw Tcs Acgoui Spray fluxer 10 soldering frames

Condition: used, functionality: fully functional, For sale is a Versaflow 3/45 selective soldering machine manufactured by ERSA. Gujdpfx Ajzzldbecgji Serial number: S011B-15G0525 Dimensions: 5.70 x 1.69 x 1.66 Weight: 2300 kg Note: Width adjustment is not possible (the transport width has been fixed to the frame width). Price upon request.

Year of construction: 2022, condition: used, Frame is from 2012 and machine fully rebuilt in 2022 by ERSA OEM. 1x fluxing module 1 drop jet flux head 180µm 3x preheating modules bottom IR lamps and top side convection 2x solder modules multi wave (dip modules) one standard size and one Gujdpfsy Uihtox Acgsi XL with electromagnetic solder pump No traceability system installed New conveyors retrofitted with heavy load chain system Ask for the full overview of the rebuild and its condition!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 64,817 h, machine/vehicle number: 260R6F441, overall weight: 1,500 kg, These are Juki SMD placement machines from two SMD lines. The machine listed is an example from the total of 3 x KE-2050RL and 4 x KE-2060RL machines, with one KE-2050RL used as a spare parts machine and not in working order. The operating hours vary between 37,248 and 66,223. Also offered are 4 tray changers, 2 x TR6SN, serial numbers: TR6-6SA75, TR6-6SA42, year of manufacture: 2006, 1 x TR6SNR, serial number: 6S7-F1090, year of manufacture: 2006, and 1 x TR4N, serial number: TR6-4018, year of manufacture: 2006, as well as accessories. Furthermore, a comprehensive feeder package is available. Details with Juki designations can be found in the list and for the docking cart. Also on offer is an X-ray inspection system: Phoenix X-Ray, PCB I a|analyser 160, year of manufacture: 2004, as well as a semi-automatic solder paste printer, Ekra E1, year of manufacture: 1999. Please refer to the attached machine list and the attached images for details. More and more detailed images can be accessed directly from us. The machines and accessories can be inspected. Gujdpfs Ai Exaex Acgoi The price listed below refers to the SMD placement machine KE-2060RL, 260R6F441, mentioned above.

Condition: used, functionality: unexamined, machine/vehicle number: V250 (Bofa) | WLA250 (Weidinger), input voltage: 230 V, Used solder fume extraction units from Bofa & Weidinger Guedexp H Ttepfx Acgei Model: V250 (Bofa) | WLA250 (Weidinger) Voltage: 230V (50Hz) | 1.1A Including power cable.

Year of construction: 2013, operating hours: 3,649 h, condition: used, Machine is in working condition and maintained according to schedule. 1 fluxer and 6 pots. Will be available in coming weeks. Ask for additional information and quote! Godpfozvcg Njx Acgoui

Year of construction: 2006, condition: good (used), functionality: fully functional, Without solder Nitrogen hood IR preheating Single soldering nozzle 3 solder frames Software, etc., manual Tool, spare parts box New timing belt, new impeller for drive installed Guodpfx Acoxzrflsgei

Year of construction: 2015, condition: used, Comes with transport conveyor system + Rohs solder (350kg). Gujdey Uwdiepfx Acgoi Ask for additional information!

Year of construction: 2011, condition: excellent (used), functionality: fully functional, Ersa Hotflow 3/20 Year of manufacture: 04/2011 Refurbished in 2024 Dimensions: Length: 6,265 mm Width: 1,201 mm Height: 1,375 mm Weight approx. 1,900 kg Conveyor System: Working width: 45–516 mm, automatically and steplessly adjustable Clearance height: +35/-37 mm Center support, automatically and steplessly adjustable Conveyor speed: 20–200 cm/min Pin chain conveyor available with 3 / 4 / 5 mm pin length options Process Zone: Process length: 4,840 mm Heated length: 3,725 mm Cooling length: 1,115 mm Heating System: Up to 20 convection heating cassettes (Preheating zone up to 14 cassettes, reflow zone 6 cassettes) Airflow per module adjustable up to 500 m³/h Nominal power per module: 3.3 kW Nominal power last module: 4.5 kW Godpfsyf N Uyox Acgjui Cooling: Up to 2-level cooling zone (ambient air) Electrical Data: 400 V, 3 phases, N, PE, 50/60 Hz Continuous operating power: approx. 12–16 kW Exhaust: Extraction capacity: Chimney at system inlet 300 m³/h; chimney at system outlet 400 m³/h, both with monitoring function

Condition: ready for operation (used), machine/vehicle number: Sn96,5Ag3,0Cu0,5, functionality: unexamined, Felder Sn96.5Ag3.0Cu0.5 lead-free solder wire, 0.5 mm ! Sold only in lots of 10 pieces ! Manufacturer: Felder Model/Alloy: Sn96.5Ag3.0Cu0.5 Guodsynhtaopfx Acgei Net weight: ~0.25 kg

Condition: good (used), Year of construction: 2007, ASSCON Systemtechnik VP1000-56 * PCB size: 500 × 600 mm * Maximum component height: 50 mm * Machine weight: 400 kg * Supply voltage: 400 V / 50 Hz (3/N/PE) * Connected power: 10 kW * Average power consumption: 3.5 kW * Standby power consumption: 1.9 kW * Compressed air supply: 5 bar, oil-free compressed air * Media consumption: approx. 2.5 m³/h * Galden® filling volume: 20–25 kg * Heat-up time: approx. 25 min * Machine dimensions (L × W × H): 1,430 × 1,385 × 1,350 mm * Loading/unloading height: 920 ± 20 mm * Cooling: Air/convection, open or closed cooling water circuit possible Gsdpfx Aezqcmfocgsui

Year of construction: 2020, condition: ready for operation (used), A Mechatronika reflow soldering oven with automatic conveyor with stainless steel mesh is available. Conveyor width: 260mm, max. PCB component height: 25mm, heating length: 900mm, max. temperature: 280°C, conveyor speed: 180mm/min. Machine dimensions X/Y/Z: approx. 1650mm/600mm/400mm, weight: approx. 80kg. Documentation available. On-site inspection is possible. Image is an example. Gjdpsx Hz R Dofx Acgoui

Year of construction: 2017, condition: excellent (used), Storage location: 2727 Manufacturer: ESTA Year of manufacture: 2017 Type: KAF 100 Serial number: 16002366 Volume flow: 700 m³/h Max. negative pressure: 1,100 Pa Connection diameter: 50 mm Features: mobile Accessories: see image, including laboratory extraction arm Connection: 0.55 kW, 230 V Weight: 42 kg Gujdjlt Uinopfx Acgji Dimensions: 485 x 485 x 920 mm (without hose)

Year of construction: 2014, condition: ready for operation (used), Working condition unit! Comes with infeed and outfeed conveyor systems and full of alloy. Machine still under operation and to be released in Q3 2026. Gsdpezcardefx Acgoui Ask for additional details!

Year of construction: 1997, condition: ready for operation (used), A Dr. Fritsch segment soldering machine for the automatic soldering of segments (typically diamond segments) onto carrier tools is available. An on-site inspection is possible. Guedpox Ecuxjfx Acgei