Used Resistance Soldering for sale (1,843)

Year of construction: 2002, condition: ready for operation (used), A soldering system SMT with pin chain conveyor for the printed circuit board industry is available. Temperature: 300°C, heating time: approx. 30min, convection zone: 1660mm, cooling zone: 1030mm, process length: 2780mm, usable width range: 10mm-460mm, clearance height top/bottom: 30mm/30mm, max. speed: 1.8m/min, machine dimensions X/Y/Z: approx. 3300mm/1350mm/1550mm, weight: approx. 1100kg, operating hours (estimated): approx. 55000h. Documentation available. An on-site inspection is possible. Expected to be available from Q1 2026. Hnjdpfx Aajxn Aatsceu

Year of construction: 2019, condition: used, 0 300 x 300 x H50 mm process temperature 100 - 260 °C cycle time 6 min. total power requirement 2,00 kW weight of the machine ca. 0,10 t dimensions of the machine ca. 0,60 x 0,60 x H0,60 m The main target areas of application for the vapor phase soldering system VP 310 series are labs, and prototype and small series manufacturing operations. Due to the compact dimensions and the fact that no stationary supply systems are needed for operation, it is perfect for troublefree application at Hodpfxexh Nu Re Aacsnu many different sites. 240V power supply are all that is needed. Typical application areas - Lab usage for qualification and test of soldering processes - Secure SMT reflow soldering of single PCB assemblies - Quality control and assurance of soldering pastes and printed circuit boards - Rework and repair of PCB assemblies with safe and reliable desoldering and resoldering of components.

Year of construction: 2006, condition: good (used), Preheating Spray fluxer 3 soldering frames Hodpexd U Axjfx Aaconu

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 50 SC AC Resistance Welding Machine Machine No. 0723122BA0001 Year of Manufacture 2007 Power at 50% duty cycle: 50 kVA Power at 100% duty cycle: 35 kVA Maximum welding power: 156 kVA Thrust 350 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Max. cylinder stroke: 80 mm Max. electrode force: 730 daN (at 6 bar), continuously adjustable Operating air pressure: 3.5 to 6 bar Mains connection: 400 volts, 50 Hz Connected load: 117 kVA / 100 amps / Cable cross-section: 3 x 35 mm² - Welding control: ARO Micro 2X16 III Version 10T16P (6 times - 16 programs) - Continuously adjustable welding current via thyristor module - Parallel electrode guide - Single-stroke welding cylinder - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently attached to the machine - PC interface RS 485 - Spot weld counter Hodev Hruhspfx Aacenu - Operating instructions and electrical diagram included Space requirement L x W x H 650 x 950 x 1770 mm Weight 330 kg Good condition

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Wave soldering system with comprehensive equipment! A spare parts package worth approximately €20,000 is included in the sale and delivery! The system comprises the following components: - Seho wave soldering system MWS 2340-F - Fluxer SelectFlux - Streamline transport system including lifts TECHNICAL DETAILS - PULSAR preheating: 2 convection and 5 pulsar preheating zones (3,300 mm length) - Wetting length (soldering system): 40 mm + 30 mm - Return transport level: raised 405 mm - Finger conveyor: L-shape, short (3 mm) MACHINE DETAILS - Number of processed solder frames: 1,060,540 pcs EQUIPMENT - Fluxer SelectFlux - Streamline transport system incl. lifts - Automatic solder bar feeder - Process gas cleaning system - Finger cleaning unit - Foldable convection top heater Hodpfxexbpnwe Aacjnu - Fan speed monitoring for convection preheating - Standard soldering unit - Wide solder nozzle unit, 7-row - Solder frame transport system incl. 2 lifts - Cooling tunnel in the return transport of the soldering system incl. timer control - Solder frame lowering station - Replacement filter for condensate trap at machine infeed and outfeed - Residual oxygen measurement with lambda probe - Nitrogen economizing circuit - Transponder system for automatic switching of soldering programs - Selective flux module (external unit) - Flow sensor for flux per spray head - Flux reservoir tank with connections - Replacement filters for external spray fluxer module – upper and lower machine sections - Spare PC

Condition: excellent (used), I am selling Weller WTCP-S soldering station. Price per 1pc. Hnjdpfx Aou Svmvsacsu

Year of construction: 2005, condition: good (used), functionality: fully functional, machine/vehicle number: 05071232191, For sale is our Seho wave soldering system (without tin). Model: MWS 2340. Condition: very good and fully functional. Includes fluxer, 2 x lifters, corner transfer unit, 8.50 m conveyor section, 1 x solder pot, 2 x pump drives, 2 x solder waves. Wave type: Wörthmann 3/5. The soldering system can still be inspected in operation for a few more weeks. Only defect: small cracks on the panel in photo no. 4. Hedpfx Aow Rl S Ejaconu

Year of construction: 1970, condition: used, machine/vehicle number: 3566, Melting chamber dimensions Length: 240 mm width: 200 mm Depth: 40 mm Solder capacity: 16 kg Power input: 2400 W for mains voltage: 220 V Hedpfx Aajb Nxf Tjcenu

Year of construction: 2007, condition: repair required (used), functionality: not functional, Belt width: 650 mm, usable height: 220 mm, heated length: 3250 mm. The furnace has 3 heating zones and a heating capacity of 125 kW. The furnace has been stored in a hall for several years, and many components need to be sandblasted and repainted. In addition, the interior of the furnace needs to be relined, and some parts need to be newly manufactured. The furnace can also be completely overhauled by us to meet current technical standards. Hedpfx Aasxdantecenu

Year of construction: 2003, condition: good (used), input frequency: 50 Hz, machine/vehicle number: 3680-03, Resistance furnaces, 2 pieces, electric, crucible, heating, metal storage, melting, capacity 300 kg/h. Capacity of one furnace, aluminum alloy, weight 1500 kg, volume of the heating chamber 1.3 cubic meters. Energy consumption in production operations (maintaining molten metal at a temperature of 720 degrees C, open crucible) approx. 20 kW. Energy consumption during production inactivity (maintaining the molten material at a temperature of 720 degrees C, closed crucible) approx. 10 kW. Maximum melting point 900 degrees C, electrical power 70 kW. Voltage 230/400V, 50Hz, lap-automatic PID controller, bath thermocouple and safety controller, PLC control. The weight of one furnace is approx. 2600 kg. Furnace dimensions: length 1850mm, width 1850mm, height 1650mm + cover with installation 300mm. Dimensions of the frame for the stoves: length 3800mm, width 1850mm, height 210mm. Note: We also add an unused reserve crucible. Hnedpfx Aaod Ev Iascju

Condition: used, Spot and projection welding machine NIMAK type BMP 20/150 Spot welding machine, projection welding machine Mach. No. 81692 year of manufacture approx. 1980 Power at 50% duty cycle 150 kVA Hnodpfx Ajv Dxm Soacsu Clamping plate below 200 x 160 mm Clamping plate above 200 x 160 mm Power setting continuously variable Max. projection 150 mm Electrode force 200 - 2000 kp continuously variable Operating air pressure max. 6 bar Connection power 600 kVA Mains connection 380 volts, 50 Hz - Welding control DTW 4Z 2P - Single spots and series spots - Parallel electrode guidance - Water-cooled without cooling unit - Electric 2-hand control panel with emergency stop - Control cabinet with control permanently attached to the machine Space requirement L x W x H 1000 x 800 x 1800 mm Weight 900 kg good condition

Condition: used, Year of construction: 2016, operating hours: 825 h, functionality: fully functional, machine/vehicle number: VP9800-254, type of input current: three-phase, input voltage: 380 V, ASSCON VP800 vapor phase soldering system – fully functional device with very few soldering cycles (1049). Ideal for small series and prototyping. Hsdpfx Aasw U Dugjcenu

Year of construction: 1997, condition: ready for operation (used), Seho 8040 PCS with laminar and turbulent wave, preheating with heating plates and IR radiator, minimum quantity flux system, component cooler at the outlet, wave width: 400mm, max. usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, solder nozzle: Delta B, max. wave height: 8mm, solder volume: 400kg, heating capacity solder pot: 9kW, heating-up time 20-250°C: approx. 150min, heating-up time 190-250°C: approx. 60min, preheating zone length: 700mm, three heating zones: 3x 3kW, max. preheating capacity: 9kW, transport angle: manually adjustable, 6-8°, transport speed: 0.5-2m/min, running direction: from left to right, with loading aid/slide conveyor (1000mm), unloading aid (500mm) and entry stopper for solder frame separation, exhaust connection diameter: 2x 150mm, extraction capacity per connection: 500m³/h, supply voltage (50Hz): 230/400V, rated power: 31,000W, total connected load: 18.5kW, compressed air connection: R 1/4 inch (6 bar), nitrogen connection: R 1/4 inch (6 bar). With microprocessor control PCS 96, alphanumeric display & membrane keypad (16 lines of 40 characters), 100 soldering programs, interface for host computer with visualized machine overview & BDE data backup, interface for BDE data acquisition via serial printer, control loop for transport and heating. Length: 2300mm, width: 825mm, height: 1615mm, weight without solder filling: 400kg. Hnjdpfx Aow Uk Aqeacou

Condition: good (used), Year of construction: 2020, Inline reflow soldering under vacuum System was in operation until dismantling Available now; commissioning can be carried out by the manufacturer after consultation. Serial number: R036A-20D0012 Year of manufacture: 2020 Dimensions: 8,063 x 2,205 x 1,969 mm (L x W x H) Weight: Approx. 5,000 kg Rated power: 138 kW Continuous power during operation: approx. 14 - 25 kW Extraction capacity: 2 nozzles, 400 m³/h each Transport system: Working width: 100 - 630 mm, center support PCB length: 120 - 400/600 mm Process zone: Inlet 1,011 mm Heating zone with vacuum 4,600/4,750 mm Cooling zone 1,400 mm Outlet 730 mm Heating system: 4 cooling zones 11 heating zones, including: 9 convection heating modules Top/bottom preheating zone Hsdpfx Asv Inw Usacjnu 2 convection heating modules top/bottom soldering zone Vacuum chamber: 400 mm Chamber volume: approx. 110 l / 150 l Pump power: up to 5.3 kW Ultimate pressure: up to 10 mbar

Year of construction: 2017, condition: used, functionality: unexamined, SMT reflow oven Condition as follows: - Transport OK - Needs cleaning - Basic functionality OK - Forced cooling not tested - Seals should be replaced and a new lambda probe is required Immediately available Hsdpfexbp Nbex Aacsnu

Year of construction: 2020, condition: as good as new (ex-display), Here we offer you a resistance welding machine. The equipment is designed for automated resistance welding of the following connections: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The equipment is loaded and unloaded manually by one operator. Any use of the system other than the one described above is not in accordance with the intended use and is therefore not permissible! Layout of the unit Welding unit Sledge unit Cleaning unit weding electrode Base Linear unit Analysis unit DMC Dimensions (lxw) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Techn. availability % ≥ 95 Operator piece 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Back-up fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of construction 2020 Components of the plant -control cabinet -Protective enclosure -Linear unit Toothed belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Transmission ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 -Slide unit Balluff BES M08EC-PSC15B-S49G -evaluation unit DMC: Keyence SR-1000 -welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Welding gun Crede PSZ-K Control unit : ST-T13V2.0 Power unit : LT- Hjdpjht U Snjfx Aacenu [...]

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Mach. No. MA35031332 / 9731122B110 Year of Manufacture 1997 Power at 50% duty cycle: 30 kVA Hnjdpfxohpf Iys Aacou Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Thrust 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 volts, 50 Hz Connected load 75 kVA / 63 amps / Cable cross-section 3x 16 mm² Maximum possible sheet pairing: 5 mm + 5 mm - ARO Micro welding control system 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module - Parallel electrode guide - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently mounted on the machine - PC interface RS 485 - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: ready for operation (used), A full convection reflow soldering system SMT with nitrogen support is available. Heating zones: 2, heating length: 1080mm, max. process temperature: 300°C, cooling type: air cooling, cooling length: 550mm, heating and stabilization time: 15min, conveyor width: 300mm, conveyor speed: 2m/min, max. component height: 80mm, total output: 15kW, machine dimensions X/Y/Z: approx. 2400mm/1000mm/1450mm. On-site inspection is possible. Hodpfev Hrfyex Aacsnu

Year of construction: 2006, condition: good (used), SEHO Powerwave 8440-LRT wave soldering system Year of manufacture 2006 400 mm working width Fluxer Hedjv Szg Rspfx Aacjnu 1 convection heater 3 IR heaters Solder filling can be offered upon request

Condition: excellent (used), Here we offer you Defensor steam humidifier. Defensor Mk5 Resistance Steam Humidifier Steam humidifier Defensor Mk5 The Defensor Mk5 steam humidifier is built according to the current state of the art and the recognized safety regulations. Nevertheless, in the event of improper use of the Defensor Mk5 steam humidifier, hazards may arise for the user and/or third parties, and/or or material assets may be damaged. To ensure safe, proper and economical operation of the Defensor Mk5 steam humidifier, please observe and comply with all the information and safety instructions contained in these Hnsdpfx Asnyh T Dsaceu installation and operating instructions. Defensor Mk5 type series Visual For indirect or direct room humidification with normal requirements for control accuracy. Defensor Mk5 Visual double unit large 80 max. steam capacity in kg/h 80.0 400V/3~/50...60Hz Mk5 ... 80 unit A: 40 kg/h unit B: 40 kg/h Type: Defensor Mk5 ... 80 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Welding transformer, high-current transformer, transformer for spot welding machines, projection welding machines, seam welding machines ELREX type 3x ET70.0.G Serial No. Year of manufacture approx. 1990 Consisting of three water-cooled transformers with water-cooled rectifier block Performance data: Total power at 50% duty cycle: 210 kVA Secondary voltage: 7 - 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Primary connection: 380 volts, 50 Hz (three-phase) Consisting of three transformers – single transformer data: Power at 50% duty cycle: 70 kVA Secondary voltage: 7 - 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Secondary current at 50% duty cycle: 6.7 kA Primary connection: 380 volts, 50 Hz (two-phase) Cooling water requirement per transformer: 4 liters/min. Insulation class: F - Water-cooled transformer - Water-cooled rectifier block mounted on the secondary side - Direct current power output connection via contact surfaces 50x50 mm, thread M20x1.5 mm - Temperature monitoring at each rectifier element and each transformer coil - Connection cable: 7 cores, cross-section 50 mm², approx. 6 m long Overall dimensions (W x H x D): 700 x 710 x 440 mm Total weight: 480 kg In good condition Hjdpfxjdzp Txs Aacenu

Condition: ready for operation (used), Soldering volume: approx. 400kg, wave width: 400mm, usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, heating power crucible: 9kW, heating time 20°C-250°C/190°C-250°C: 150min/60min, transport speed: 2m/min, power requirement: 18.5kW. Machine dimensions X/Y/Z: approx. 2300mm/850mm/1650mm, empty weight: approx. 450kg. Documentation available. Hnsdpjud Svzofx Aacou

Condition: used, DALEX Spot Welding Machine Type SF 204 Machine No. AZA/N-32865 Year of Manufacture 2010 Power at 50% duty cycle: 30 kVA Continuous power: 21.2 kVA Maximum short-circuit power: 108 kVA Maximum welding power: 86.4 kVA Throat 500 mm Arm distance 350 - 500 mm Electrode force: 65 - 360 kp (short throat) Electrode force: 25 - 140 kp (long throat) Electrode arm Ø 45 mm Electrode holder Ø 25 mm Electrode stroke 20 mm Welding capacity: Steel sheet 5 + 5 mm / max. 6 + 6 mm Brass sheet 2 + 2 mm / max. 3 + 3 mm Aluminum sheet 1 + 1 mm / max. 1.2 + 1.2 mm mm CrNi 1 + 1 mm Round steel 12 + 12 mm / 16 + 16 mm Open circuit voltage 5.2 volts Connected load 55.2 kVA Mains connection 400 volts, 50 Hz - Multifunctional welding control system with Dalex RS 15 microprocessor - Lower electrode arm with swivel fitting for height adjustment and lateral swiveling - Foot pedal operation - Water-cooled (cooling water requirement 4 liters/min.) Space requirement L x W x H 1250 x 415 x 1200 mm (height = 1310 mm with base) Weight 196 kg Hnodpfx Aajit Rq Hjceu Very good condition

Condition: used, Spot welding machine DALEX type SL 16 EA Machine No. 68611900-5 Year of manufacture: 1986 Rated power at 50% duty cycle: 16 kVA Maximum welding power: 50 kVA Throat depth: max. 500 mm Electrode force: max. 17 - 278 daN Electrode arm diameter: Ø 45 mm Electrode holder diameter: Ø 25 mm Arm spacing: 140 mm / 280 mm Power switch: 8 stages Control: 4 times with single and series spots Operating pressure: 1-6 bar Open circuit voltage: 1.8 to 3.6 volts Connected load: 37 kVA Electrical connection: 400 Volt, 50 Hz - Welding cycle initiated via electric foot switch - Welding time infinitely adjustable - Water-cooled Space required (L x W x H): 1100 x 600 x 1200 mm Hsdpfx Aaewwaz Nscenu Weight: 200 kg Good condition

Condition: used, Spot projection welding machine NIMAK type PMP 5 / 35 Spot welding machine, projection welding machine Make No. 88100 Year of construction approx. 1988 power at 50% ED 35 kVA Hedpfx Ajhubgzoaconu throat 250 - 450 mm working stroke 40 mm electrode force 100 - 460 kp infinitely variable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insert electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Adjustability of electrode holder 200 mm Connected load 83 KVA Mains connection 380 Volt, 50 Hz - 4-time control - stepless power adjustment - single points and series points - bouncing electrode guide - water cooled (without cooling unit) - electrical foot switch space requirement L x W x H 1200 x 650 x 1500 mm weight 300 kg good condition