:
Dimensions (basic system):
Yswur0
Length: 2,580 mm / 101.5”
Length incl. conveyor system: 3Ersa Versaflow 40/50 Specification,580 mm / 141”
Width: 1,525 mm / 60”
Height: 1,800 mm / 70.8”
Weight: approx. 1,100 kg / 2,400 lb. (without solder)
Paint: RAL 7035 / RAL 7016
Conveyor system:
Type: Pin and chain conveyor for pallets
alternatively roller conveyor
Conveyor angle: 0° fixed
Pallet width: 50-400 mm / 2-15.7” (option: 50-500 mm / 2-19.7”)
Pallet length: 120-500 mm / 4.7-19.7”
(option: 120-...
AOI VI Technology Typ 3KP
year: 2010
Camerasystem Spectro I-Lite 19 pixel
very clean and good condition (as good as new)
Cm3bzrk8
Siemens Siplace D1, year of construction 2007 with DLM3 and Twin Head Module
Dnn0vy2yg
on one gantry, single track transport L>R, incl. 2x spring carriages.
Also available Siplace D2 with DLM3 heads in 6/12 or 12/12.
Machines all have annual maintenance intervals.
UNUSED! Pictures shows feeders loaded, this is only for installation setup back in 2016. It has never been running production. It is as new and fully working !
PART NO. DESCRIPTION Quantity
288000 Placement station SIPLACE E 1
288201 Change over Table(COT) incl. HMI 1
Fixed Right 1
288303 Default Conveyor height 900mm 1
288001 Flex package SIPLACE E 1
288102 CP12&PP 1
288503 TH/PP nozzle changer location 2A (default) 1
288500 CP12 nozzle changer location 1 1
Additional Items and...
The CubeLoader is a compact and space-saving automation for small and medium-sized series production. With the CubeLoader, capacities in your company can be planned more efficiently. Your machines work at optimum capacity and your failure rate is significantly reduced. The workpiece storage can be individualized on customer request and can also be changed by the customer after installation of the cell. In the basic version, the CubeLoader is equipped with an inlay module; the spacing and size of...
Dimensions (LxWxH)
Batch: 1330 x 970 x 1470 mm
(+500 mm for signal light)
In-line: 1330 x 1430 x 1470 mm
(+500 mm for signal light)
Motion System
Type: Closed-loop servo drive
with linear encoder
XY velocity: 700 mm/s
XY acceleration: 1 G (1000 mm/s²)
Z-axis velocity: 250 mm/s
XYZ encoder resolution: 1 µm
Positional accuracy: 50 µm
Rotation (optional feature): 360 degrees (only with Z-axis with
motorized rotation and tilt [DR-2010])
Work Area (based on one valve on Z-axis)
Batch: 525 x 420 mm
Z-...
Handlings/assembly cell Fabr. FMB, type Unirobot LR Mate 200iD, Y.O.M. 2018, Ser.-No. 58-210210
Bspmgu2bki
Dear Sirs,
You are bidding here on a fully comprehensive Highspeed Pick&Place system, originally built as a concept for placement on a rotary table injection molding machine.
The setup was only used for test purposes with a maximum runtime of 50h.
Ddm7obn
The setup includes an Adept s800 for picking from a parts hopper (Adept Anyfeeder) for further staging and positioning, packaging or assembly. The parts hopper is an Adept Anyfeeder bulk hopper as an alternative to the classic vibratory convey...
For sale 5 Rexroth 3842547200 sensor modules for 75061 and 75062 electric fork lift, Sensor unit comfort, case lifter.
Hjxbqljbq
Availability: 5 pieces
Net price: 250.- euros / piece
Additional discounts if you buy more than one piece.
Parcel delivery by appointment.
Please send me your questions by email.
No teaching required Changeover in 10 minutes
With the Visiomatic we offer you a ready-made combination of robot cell and robot. This is optimally adapted to your specific needs and requirements.
With up to 5 drawers a maximum height of the parts of 100 mm
Drawer size 1200 X 800 mm
Loading of the drawers possible at the same time
Load capacity of the drawers 200 kg
Recognition of the parts by camera technology and or, positioning of the parts by inlay technology
Pvlaki
Easy creation of new inlay...
We sell our Rommel LEG 55 WA - 470 ( input station )
The plant has worked until the removal .
Hsozuqn
Immediately available .
There are more input / output / transports etc. available .
ERSA Reflow oven
Bt2faa9w0r
10 Tray receptacles
Dvjkvpb
Switch/control cabinet
Enclosure
Control
ASYS STM03 D Shuttle Conveyor
Year of Man. 2017
O03cx
PCB Length 80- 360 mm
PCB width 80- 250 mm
If you have any question please contact us.
ALMOST NEW, USED ONLY AS DEMO MACHINE
Localisation : EUROPE
Bt0cx32cpt
(M2104SIMTFR01)
HEAD: YSP-3S
Viscom S 6055 II
Calibration plate
Manual
Btx0dkhx22
We sell our Viscom S 3088 -3
Ytoaas
The plant is in a top condition and immediately available.
Location : 93426 Roding
Electrovert Speedline OmniFlex 10 Reflow oven
edge/ center board support(retractable)
Left to right front rail fixed
10 top and bottom heat zones
Bs7gbpb330
480v 3ph
Auto conveyor width
Good working condition
There are four ROMMEL LAG 55 T-530 and two ROMMEL LEG 55 S-530 available, two machines need overhauling.
Ytpmx0
Nutek Triple Output Station NTM 730 EXL. Year 2010
Vt8fvy
Nutek Input Station NTM 720 EXL ( for 2 Magazine) Year 2010
If you have any question please contact us.
Machine refurbished by essemtec in 2014 !!!!!
1. Feeder ( 10x8mm_) x 1szt
2. Feeder (2x8mm, 2x 32mm) x 1szt
3. Feeder ( 4x8mm, 1x12mm, 1x16mm, 1x24mm)x 1szt
4. Feeder Vibro CLM 960 x 2 szt
5. complet Nozzle
FLX2011-C
F30frgb
with laser centering, intelligent feeder
-bus with up to 100 feeders, CCD-camera
-for teach-in, automatic fiducial recognition
-system, 3-stage conveyor system with SMEMA
-connection, automatic tool changer with
-5 tools (1-5), industrial PC
-with Windows XP, 3-colour sig...
SMT pick and place machine from Juki / Zevatech.
Ow0hx
Machine unchecked, must be picked up in the city of Düsseldorf.
LIFTING-ROTATING DEVICE ROTARY LIFT TABLE LIFT TABLE LIFT-TURNING TABLE
Hydraulic / operable with forklift or lifting ant, pallet truck, front loader, etc.
ideal for quick provision and removal of Euro pallets, large containers
or mesh boxes at the end of a production line Production line,
Article- No. different please ask for
Manufacturer: M.B.W GERMANY
robust technique
Article used and ready for immediate use / all parts available
various lifting equipment in stock
Price quoted net / piece plu...
Key standard features
• SelectWave solder pot
Bl80fqz9t7
• Teach camera
• Pressurized flux supply
• Preheat
• SMEMA interface
Max. PCB size
410 x 410 mm
Max. component height top side
91 mm
Required PCB edge clearance
4 mm
Max. PCB weight
5 kg
Pressurized fluxer
130 micron nozzle,
stationary
Solder pot volume
40 - 45 kg
Preheater lamp unit
5 kW quartz
N2 consumption
Min. 3 m3/hour
Power consumption
1,5 - 6,4 kW
Power supply
3 x 400 V, 50/60 Hz
The machine was never used.
Btkcnbpkip
Type: DIMA HP-100 Year of construction: 2003 Operating hours: 11226 h (still in use)
Feeder:
SMCS-4208: 1
SMCS-4008: 70 (36paper, 34plastic) + 3 defective
SMCS-4012: 15 + 1 defective
SMCS-4016: 4
SMCS-4024: 3
SMCS-4032: 1
SMCS-4044: 1
SMCS-5000: 6 + attachments
Tray changer: 1
Nozzles:
2701: 1
2703: 5
2705: 3
M9mist
2706: 2
2710: 4
2715: 2
2720: 2
2730: 1
2750: 1
Calibration plate
Various spare parts:
Spring washers, rubbers for feeder, jaws, holder for board, gears,...
Machine is located in Upp...
handling advice, originally used in solar modul line
Bewlefrm8u
SMT pick and place machine from Juki / Zevatech.
Machine unchecked, must be picked up in the city of Düsseldorf.
Gw9qlo
with extended immersion depth for fast loading
with servo drive
two-stage feed system
motorised adjustment of the guide prism and material separation
incl. 2 push rods Ø 10 + 20 mm
and 2 thrust pieces Ø 10 + 21 mm
SPS control system
Slide-in controller
Bde3pkj8
Manual control panel with plain text display
Loading area 650/900 mm x 1650 mm
For material processing from Ø 5 to 100 mm, 150 to 1600 mm long
Material length limited by headstock length
Stamgenlader was not put into operation after the p...
Please give us your quoted price
Sales only within Europe, incl. Turkey
-----
Without packaging; Technical data please see handout in attachment.
German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations.
Spobjtq
Voltage: 230V, current: 2A.
O2mtp
Siemens Simovert Masterdrives 310A
6SE7033-1EE85-1AA0
Feed-in and feedback unit
Built-in unit / 1P00 3AC 380-480 V 50-60 Hz
For further details see name plate (photo).
Article condition: used, untested
condition: used, untested
Without OVP
Without original packaging
Example photos
sample pictures
Jvvrjy
A visit to Ladbergen/ Steinfurt district is possible!
For further questions you can contact us by email.
The sale is made exclusively to commercial interested parties for commercial purposes ...
Demo machine. Was only in a showroom. Never seen any chip.
Like new. With warranty.
Pallet size 400 mm x 768 mm
Time for palletchange app. 12 seconds
Xzaxs
CE-Housing
Fits perfect to HAAS VF2, as well to other VMCs
Video on youtube
Keywords
Midaco palletchanger
Ready-to-use DEK 265 Horizon SMT paste printer.
Currently part of a pick and place line.
The machine must be picked up in the city of Düsseldorf.
Brlwntc22c
Dear interested parties,
We offer here one of 15 available jaw grippers of the company Schunk.
Bpi2tvgfon
JUKI KE1070L , year of construction 2010, approx. 18000 operating hours, incl. 2x feeder trolley and 50 pieces of feeder.
Available JUKI KE1080L, year 2011, feeder trolley and feeder.
Available JUKI KE2020, year of construction 2001, feeder trolley and feeder.
Wehkylfn
Flexible robotic cell
Manufacturer: HandlingTech
Type: SRZ 500/50 2-P
Ziiddngb
Year of construction: 2007
Control: System R -J3iC
Robot : Fanuc Robot M710 C70
ROBOT AXES: 6
RANGE: 2050 mm
LOAD: 70 kg
We offer a Mazak CELL510
Bjgcdbfaog
It is suitable for any Mazak laser machine with large format 3000x1500.
- HTX, NTX,Hyper Gear, STX etc.
We are happy to offer a complete service:
Delivery, installation, instruction
We sell our Viscom S 6055 II
With measuring plate
Good condition
Bjtylwzriz
Location : 93426 Roding
Ready-to-use pick and place machine.
For further performance data, please refer to the data sheets in the appendix.
The machine must be picked up in the city of Düsseldorf.
Ic2w8pot
Dear interested parties,
Here we offer one of several available platforms.
The pedestals were newly painted.
we have these available in the heights 70cm and 100cm.
The diameter of the lower plate of the pedestal is 120cm.
Onvmp
We also have other unpainted pedestals in many different heights, and can also paint them in your desired colour if required.
We can also offer you suitable robots and other technology like turntables/positioners etc.
For SMD glue and soldering paste, board dimensions: 50-600x50x400mm, max. board weight: 4kg.
Boeyqelng
Features:
-
The system and conveyor belt are designed for a maximum pallet size of 300 x 200 mm.
-
Smaller pallet dimensions can be adapted to the basic pallet. A different conveyor belt is required for use of a pallet with larger dimensions.
Installed functional sequence:
-
The operator places the pallets (1) with the components to be processed correctly positioned onto the conveyor belt (2).
-
The conveyor belt (2) transfers the pallets into the machine.
-
The robot (3) always picks one compo...
OCASIONES PULIDO is marketing 2 used MECALUX brand Shuttle cars for use in automated warehouses
Gwfekc
Manufacturing year: 2013
Working voltage: 24 V
Unit price: 8,500 euros
- The trolleys incorporate sensors to detect and manipulate pallets of widths and sizes (1200 x 1200/1200 x 1000/1200 x 800)
- The cars are powered by Lithium batteries which provide autonomy of up to 10 Hrs at full performance depending on working conditions and temperatures.
- Easy access to batteries for manipulation i...
Magnetic palletizing system
820x820 Recording surface
pneumatic steering
More details on request, at best by telephone
Bhsletiobd
Ready-to-use Juki pick and place machine.
D3qckmm0k
For further performance data, please refer to the data sheet in the pictures.
We have many different platforms for Kuka robots and ABB robots.
Just ask us and tell us the desired height and the type of robot so that we can make you a suitable offer.
Ccs0q89
X-travel: 400mm, y-travel: 400mm, laser: A 1410-388 BED, laser power: 40kW, extraction output: 75m³/h, compressed air supply: 5-6 bar, length: 1100mm, width: 1200mm, height: 1800mm, weight: 500kg.
Nip92fa
