Bar loader

IEMCA TAL 65/32

Condition: good (used), -KOM 3005- We offer here a used bar feeder for lathes. Technical data Machine dimensions: (w x d x h) approx. 3850 x 700 x 1300 mm Chedpfx Adjurldcj Ijc Power connection / control voltage: 220 Volt / 50 Hz Machine no.: 90042033 Remarks: The machine is under power in our warehouse and is ready for demonstration

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 935 mm, controller manufacturer: OKUMA, controller model: OSP-P200L, number of axes: 5, This 5-axis Okuma Multus B300-W was manufactured in 2006. It features a robust turn-mill center with a swing over bed of 630 mm and a maximum turning diameter of 450 mm. Equipped with a bar feeder, toolsetter, and a tool magazine holding 40 tools, it ensures efficient operation. The control system is an advanced Okuma OSP-P200L. If you are looking to get high-quality turning capabilities consider the Okuma Multus B300-W machine we have for sale. Contact us for more information. • ATC / tool magazine: 40 positions • Toolsetter • Maximum distance between chucks: 900 mm • Maximum turning diameter: 450 mm • Sub spindle: A2-6 nose; 38–5000 rpm • Indexing: C-axis 0.001°; B-axis 0.001° Additional equipment • Barfeeder IF Chedjx D Rvhepfx Ad Isc • Approximately 60 HSK 63 tool holders • Half a pallet of soft and hardened chuck jaws • 3 spindle stops (various lengths) • Various collets

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible. Chedpfotx Dn Uex Ad Ijc

Condition: ready for operation (used), Year of construction: 2014, operating hours: 30,222 h, total height: 3,240 mm, overall weight: 8,880 kg, This 3-axis Hurco VMX 50i was manufactured in 2014, featuring a robust table size of 59 x 26 inches and a maximum spindle speed of 12,000 rpm. It supports a tool capacity of 40 with a rapid tool-to-tool ATC time of 2 seconds. Ideal for precise, heavy-duty machining with a maximum table load of 4,410 lb. If you are looking to get high-quality milling capabilities consider the Hurco VMX 50i machine we have for sale. Contact us for more information. • 30 slot tool magazine • Table Size: 1500 x 660 mm • T-Slots: 6 x 18 mm • Maximum Weight on Table: 2000 kg • Spindle Nose to Table: 101 mm • Maximum Spindle Speed: 12000 rpm • Spindle Power (15 min/Continuous): 15 kW / 11 kW @ 720 rpm • Spindle Torque (15 min/Continuous): 198.9 Nm / 116.7 Nm @ 720 rpm • Tool Type: CAT 40 / Big Plus® • Tool Capacity: 40 • Maximum Tool Diameter: 76 mm • Maximum Tool Length: 300 mm • Maximum Tool Weight: 7 kg • Tool-to-Tool ATC Time: 2 sec Chedpfex D E Eqex Ad Ijc Dimensions Machine Depth 5055 mm

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines. Chedpfxjghrgue Ad Isc

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5s Okuma MU 6300 V L 5 AXIS was manufactured in 2016. It features a generous X-Axis travel of 1,450 mm and Y-Axis travel of 1,050 mm, providing ample workspace for various machining tasks. With a maximum workpiece diameter of 830 mm and a tool magazine capacity of 64 positions, consider the opportunity to buy this Okuma MU 6300 V L vertical machining centre. Contact us for further details. • A-axis rotation: +90° / -120° • C-axis rotation speed: 800 rpm • Distance table–spindle nose: 160–760 mm Codpfxjyia Tlo Ad Ijhc • Rapid feed (all axes): 50 m/min • C-axis table diameter: 630 mm • Max workpiece size (D × H): 830 × 550 mm • Tool magazine: 64 positions (expandable to 166) Technical Specification Taper Size HSK 63

Condition: good (used), Bar feeder LNS Chedpfxor Iygis Ad Iec

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE Codpfxey Tzc He Ad Iehc - Tool holder type : BT40 - Spindle power : 36.5 [kW] - Spindle speeds : 12000 [rpm] - B Rotary Axis : 90 [°] (+/-) LINEAR AXES - Travels on X/Y/Z axes : 1525 / 660 / 610 [mm] - Rapid traverses rates (X/Y/Z) : 32 / 32 / 24 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : 1680 x 660 [mm] - Distance table / spindle nose (min./max.) : 12.7 - 622.3 [mm] - Maximum weight upon table : 1360 [kg] - Diameter of the C-type rotary table : 600 [mm] - Travel : 360 [°] - Maximum load on the rotary table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 69 [kVA] WEIGHT & DIMENSIONS - Machine weight : 9.800 [kg] EQUIPMENT - CNC : WinMax / MAX5 - Electronic handwheel - Coolant tank * with high-pressure pump - Coolant through spindle - Chips conveyor - Spindle cooling unit - Tool probe

Condition: used, Year of construction: 2014, Technical details: x-travel: 760 mm y-travel: 760 mm z-travel: 760 mm b-axis: 360.000 x 0.001 ° spindle drive: 26 / 18,5 (40% / 100%) kW spindle turning speed range: 50 - 15000 U/min Tool bore: KSK-A63 Codpsxrwpdjfx Ad Ishc max. table loading capacity: 500 kg total power requirement: 43 kW weight of the machine ca.: 11,5 t dimensions of the machine ca.: 2,7 x 4,73 x 2,87 m

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 2,900 mm, total width: 1,350 mm, total length: 1,710 mm, rotational speed (min.): 1,000 rpm, power: 5.5 kW (7.48 HP), SPYRA chip centrifuge 600H - For removing oil or emulsion from wet chips - Fully operational and ready for use Chjdow Nqu Aopfx Ad Ijc - Warranty available on request! - Tramp material within the chips presents no issue for this machine; it is specially designed and patented for this purpose. Throughput capacity for broken chips: - Steel: 4 t/h - Aluminum: 0.8 t/h - Brass: 2.7 t/h - Grey cast iron: 2.7 t/h The machine can be inspected in 71384 Weinstadt near Stuttgart.