Used Balancing Arbor for sale (1,273)

Year of construction: 2010, condition: used, Technical details: range of revolution per miute: 180 U/min voltage: 220/ 50 V/Hz machine weight approx.: 150 kg dimension machine xH: 1,2 x 0,8 x 1,3 m total power requirement: 550 kW Car tire balancing machine The balancing process is automatic with wheel braking. Program selection can be chosen between 11 balancing methods. Microprocessor controlled LED display with digital weight display. Center hole of rim Ø 40 - 154mm Shafts Ø 36mm Rcsdpou Ic Aiofx Aa Ejk Measuring speed 120 rpm. Measuring time 5 - 10 sec. Cone sizes: Ø 44 - 63mm; Ø 61 - 79mm; Ø 77 - 114mm; Ø 107 - 154mm Wheel dimension: Rim width: 1,5" - 18" RimØ max. 10" - 24" Wheel Ø max. 890mm Wheel weight max. 65kg *

Year of construction: 2023, condition: as good as new (ex-display), The mobile field balancing machine from the experts The statistics are indisputable: Over half of all faults and failures of machines and systems can be attributed directly or indirectly to unbalances in rotors. The SmaRT helps you to identify an unbalance simply and accurately, and to correct it with the minimum effort. Rcodjmt Atdopfx Aa Esk With the SmaRT, rotors of almost any size and weight can be balanced quickly, costeffectively and accurately in the installed condition, and therefore without having to dismantle the machine. The SmaRT advantages: • Easy operation with the aid of navigation and function buttons, • Large illuminated colour display, • Standardised vibration measurement, • Assessment setup to DIN ISO 10816-3, • Simple transfer and documentation of measurement results.

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) Rcsdpfxox Ein Se Aa Eek The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: good (used), Year of construction: 1996, Test specimen diameter: 320 mm Test specimen width: 140 mm Test specimen weight: 20 kg Rcsdpfx Aaov E D Nuj Eok Test mandrel length: 178 mm Test mandrel pin diameter: 15 mm Weight: 4.7 kg Space required: 420 x 280 x 350 mm

Year of construction: 1960, condition: used, R.A.S. rotary mandrel press Type 200-20 machine no. 117/6 stroke 200 mm Rcodpfoic Rn Ujx Aa Ejk pressure force 20 t spindle diameter 60 mm

Condition: used, workpiece weight 100 kg Redpfsv Nq Swex Aa Eeck workpiece length 1000 mm diameter 500 mm centre height 280 mm total power requirement 2,5 kW weight of the machine ca. 1 t dimensions of the machine ca. 1,6x 1x1,6 m

Condition: used, Industrial robots, robots, counterbalancing -Manufacturer: KUKA, counterweight from robot KR125/3 Rjdsk Hdtuspfx Aa Eock -Type: GA2-D2 -Location hole: Ø 54 mm, distance 620 mm -Technical data: see photos -Dimension: 760/220/H290 mm -Weight: 41 kg

Condition: excellent (used), 1 pc. Balancing mandrel for grinding wheels with knurled nut Smallest taper diameter 40.5 mm Largest taper diameter 50 mm Taper length 50 mm Cylindrical taper R/L diameter 30 mm Rcodpfxoh Ukr Hs Aa Eek Total length 250 mm Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 4143 Dortmund - Wambel

Condition: used, Year of construction: 1999, functionality: fully functional, cutting height (max.): 200 mm, feed rate X-axis: 40 m/min, cutting width (max.): 310 mm, cutting length (max.): 8,000 mm, saw drive: 15,000 W, total length: 2,500 mm, total height: 2,300 mm, height adjustment type: electric, overall weight: 8,500 kg, total width: 2,000 mm, saw blade diameter: 350 mm, power of feed motor: 4,000 W, table height: 810 mm, equipped with 2 shafts (upper and lower) for a maximum cutting thickness of 200 mm 2 motors of 75 KW each cutting width: 310 mm Redpfxswy Hzuo Aa Esck

Condition: new, Technical data: Pressing pressure max.: 5000 kg Projection: 315 mm Rcodpfjuxpwnjx Aa Eok Installation height: 800 mm Stroke: 530 mm Height: 1650 mm Punch thickness: 56 mm Table surface: 250 x 360 mm Recess in the table: 85 x 125 mm Turntable with 4 slots: ø 237 mm Weight, approx.: 145 kg

Condition: excellent (used), The Schenck TB Comfort is a horizontal hard-bearing balancing machine, designed for high-precision balancing of turbocharger rotors, in particular turbine wheels with shaft as well as compressor wheels. It covers a wide range of speeds and rotor sizes, with a maximum rotor power of 200 W and a maximum rotor diameter up to 350 mm. Rcedpfow N Rg Eox Aa Ejk

Condition: used, Electrodynamic balance shaft balancing machine, vertical balancing machine, balancing machine SCHENCK RoTec Type EBLY Manufacturer No. 1FLY, Year of Manufacture 2000 Workpiece/Test Specimen: Balance shafts Number of measuring planes: 2 Number of balancing planes: 2 Angle of balancing components: 145 - 215° Test specimen weight: max. 10 kg Indicated unbalance: 2 gmm/square Lowest value per scale value: 8 gmm/square Balancing spindle speed: 1200 rpm Scale disc with test specimen holder Ø 320 mm Test specimen diameter max. 400 mm Vibration sensor: P01 force sensor Angle position sensor: HBBC incremental encoder CAB 750 microprocessor measuring device RS232 serial interface Workpiece weight: 2.2 kg Workpiece length: 250 mm Workpiece diameter: 70 mm Rodpfx Aaewgnu Ns Eock Power supply: 400 V, 50 Hz Rated current: 16 A - SCHENCK M341 balancing indicator Space requirement: L x W x H: 2000 x 1800 x 2000 mm Weight: 620 kg Good condition

Condition: used, Balancing machine, wheel balancing machine, tire balancing machine, balancing machine -Manufacturer: MPM Micro precision Marx, balancing device AB100 -Scope of delivery: according to pictures Redpfx Aaof Dlt Us Eock -Dimensions: 300/315/H130 mm -Weight: 5.4kg

Condition: new, Year of construction: 2025, FEATURES BENEFITS Compact design Integrated air supply Utilises your existing workshop air supply, 7 bar, clean dry air requirement It has the ability to measure digital and analogue wastegates on all vehicle models. With its 23.5-inch full touch screen and simple interface, it is very easy to use. Can be used without an internet connection Built-in database of more than 1900 references Flow adjustment possible for all types of turbochargers up to 200 kg/h Redsq Trzfopfx Aa Eock Calibration test plates provided to easily verify machine accuracy All types of turbochargers can be easily connected with 6 adapters included as standard. G3 REA-Master (USB) Controller Built-in complete with 14 cables 12 volt and 4 cables for 24 volt It displays and adjusts the current, voltage and position values of the Turbo VGT turbochargers. It can test all types of turbos with electronic, vacuum and vacuum sensor. Operates on 200 volts of electricity Calibration test plates supplied for easy verification of machine accuracy Supports PWM, FDCan, Can 2.0, Linbust, j1939 automatic communication protocols You can assign programmes to activators Quick-release mounting flange with adapters Machine weight 150kg Full CE Accreditation INCLUDING 1 x FX1 Flowbench Machine 1 x Touch Screen Monitor 14 x R.E.A. Cables 4 x 24 v Cables (OPTIONAL) 3 x C-Clamps 1 x Magnetic Stand

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, TECHNICAL DETAILS Maximum balancing weight: 2,000 kg Balancing body diameter without machining unit: 10 mm Bed length: 3,000 mm Swing diameter over machine bed: 2 mm Rotor shaft via belt drive: 10 mm Drive unit balancing speed (5 gears): Max. 80 / 160 / 290 / 470 / 630 rpm Measurement method: force measuring Electronics speed measurement range: 60 to 30,000 rpm Center height measured in bed: 1,200 mm Rollers: 2x 195 x 56 mm Axle spacing: 205 mm Adjustment travel: 3 mm vertical MACHINE DETAILS Drive power: 22 kW Compressed air: 6 bar Connected load: 25 kVA / 20 kW Machine weight: approx. 5,500 kg Rcodow T Sqmopfx Aa Esk Machine dimensions approx. (L x W x H): 3.3 x 1.5 x 2.0 m Control cabinet dimensions: 6 x 610 x 21 mm EQUIPMENT - Measuring electronics PCX - Base frame (cast steel body) - Mounting length between bearing supports up to approx. 3,000 mm - Adjustment with hand ratchet via rack - Bearing supports/swing bearing blocks: 2 pieces

Condition: as good as new (ex-display), Compact balancer with vertical spinning axis and load capacity up to 50 kg. Thanks to its compact design, the machine takes up relatively little space and does not require foundations, so it can be easily relocated to the desired location. The balancing process is controlled by the latest measuring system "ROTORTEST 9.5" with dedicated software equipped with workshop programs, which convert the unbalance into a convenient correction method, e.g. into drilling or milling parameters. Vertical axis balancing machine is recommended for balancing rotors mounted on a bore, e.g. fan rotors, pulleys, flywheels, tools, pumps and many others. The biggest advantages of this type of balancing machine are its universal application, the possibility of using dedicated self-centring chucks giving high measuring accuracy, simple and quick calibration method, so called "manufacturer's calibration", which does not require calibration runs to be carried out before starting the measurements. The whole procedure consists only in entering basic rotor parameters into the software. This machine is an excellent choice for balancing single pieces of various rotor models, and in particular for balancing large series of the same rotor model. Rcedpfx Aajf Nvwpe Esk Parameters Maximum rotor weight - 50 kg Maximum rotor diameter - 650/850 mm Maximum rotor height - 500 mm

Condition: used, Year of construction: 1998, workpiece weight 150 kg workpiece length 2500 mm diameter 160 - mm balancing speed variable 100 - 3000 U/min dia. axle journal 160 - 350 mm voltage 400 V total power requirement 1,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 7,50 x 1,30 x 1,60 m Rjdpjwcg Elefx Aa Esck Control 0,60 x 0,60 x 1,85 m Software TIRA X9000 Operating System Windows XP Software update 2007 Serial No.: R 32/98 Max display sensivitiy: 0.5 gmm Balancing speed 100 - 3000 RPM

Condition: good (used), Year of construction: 1988, machine/vehicle number: 222 056 A110, Müller Weingarten CE 40.25.4 Press -WAG 850 The machine is tested according to VDE until 23.09.2026. Manufacturer: Müller Weingarten Rcedpfx Aaoqrqz As Ejk Operating voltage: 380 V Control voltage: 220 V Direct voltage: 24 V Rated current of the machine: 25 A Per/s: 50 Delivered: 1988 Overtravel: 9 mm Overtravel time: 80 ms Safety distance: 128 mm

Condition: used, Year of construction: 1982, workpiece weight 60 kg Rcodpfxot Hxbqo Aa Eok workpiece length 700 mm diameter 500 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: new, Year of construction: 2025, Our most advanced software delivers incredibly sensitive measurements. Only 1.5 seconds to measure. Validation world-wide. Balancing speed - up to 300,000 revolutions per minute. Long lasting mechanical quality. Rodpfsq Tr R Sox Aa Eock 7/24 online support. 10 pieces of nozzles (28 - 65mm). 25 pieces of flanges. Five-stage oil filtration system. A core oil leak test. Automatic air flow control valve. Prevent turbo from running dry by controlling oil pressure and temperature. Energy-saving and cost-saving adapter system. Adapter changeover time is less than 15 seconds. Free online technical support during the warranty period and after the warranty period. Support for spare parts. Required capacity of the air tank 1/2 m³. Colour printer. (Ops) Dremel for grinding. (Ops)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2950x1620x1770 mm Weight 3300 kg Total power requirement 71,5 kw Rodevz Hxkjpfx Aa Esck

Year of construction: 1970, condition: not inspected (used), Offered here is a balancing machine from the company Trebel. The machine has a solid steel protective hood. For rebuilding, because the control cabinet is missing! Technical data: Manufacturer: Trebel Type: FC4c-xn Year of manufacture: 1970/74 Normal weight range up to 400kg Max. permissible load per block: 200kg Rcsdohikdwspfx Aa Ejk

Condition: new, Year of construction: 2025, or Weight ----- 1000 kg or Weight ----- 10 kg or Diameter ----- 1400 mm Rodpfx Aasq T Ikle Ejck ft Diameter ----- 10 mm ft Diameter ----- 240 mm Bed Length ----- 3000 mm Motor power ----- 11 kW Drive Unit ----- Belt

Condition: new, Year of construction: 2025, Technical Specifications Rcjdper Dd Avsfx Aa Eok Max Weight 3000 kg

Condition: new, Year of construction: 2025, or Weight ----- 20 kg or Weight ----- 500 g or Diameter ----- 450 mm ft Diameter ----- 5 mm ft Diameter ----- 50 mm Redpfx Aoq T Riwsa Ejck Motor power ----- 750 W Bed Length ----- 600 mm Drive Unit ----- Belt