Used Horizontal Baler for sale (6,184)

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Gtjdpfx Afex Dnb Ujnju Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: used, Speed-Tech Equipment horizontal cardboard baler, bales are approx. 1200 lbs., 6' long x 36" wide x approx. 28" tall, 3 phase, in working condition, winning bidder responsible for proper removal. Gjdpfoxd D Nzex Afnotu

Condition: good (used), Protech Horizontal Collator Model: HC2010 Plastic belt, belt width: 250 mm Distance between dividers: 200 mm, divider height: 150 mm Gsdpfsv T D Duox Afnetu Clearance: 140 mm x 150 mm Total dimensions: 2900 mm x 560 mm x 1540 mm.

Condition: excellent (used), Year of construction: 2014, Horizontal conveyor 2000x800mm year 2014 price: €1,850.00 Gedsu N Aykepfx Afnetu contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2015, Horizontal conveyor 3000x800mm year 2015 Gjdpfx Aju N Argofnotu price: €2,450.00 contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2015, Horizontal conveyor 3000x800mm year 2015 Godpfx Asu U Ii Eefnotu price: €2,450.00 contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2014, Horizontal conveyor 2000x800mm year 2014 Gtsdpfx Afou N Axgjnsu price: €1,850.00 contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2015, Horizontal conveyor 3000x800mm Gedpeu N Aqcofx Afnetu year 2015 price: €2,450.00 contact: Mr. Rainer Eckerle

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 type 90X12 Overall dimension in m: Lengh 10,30 Width 2,30 Height 1,81 Height in cleaning position 2,31 Deep-freezing chamber Lengh 8,70 m Effective width 1,20 m Gedpfjyf Hliox Afnstu Height 0,25 m Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework

Condition: excellent (used), Machine: Used Lindemann Sobod 8 Metal Baler Bale size: 400mm x 400mm Gtedpfsxrz S Ajx Afneu Specifications: see table Status: ready to use Condition: in very good maintenance condition Year of manufacture: unknown Power: electric Availability: March/April 2025

Condition: used, total length: 5,300 mm, total width: 2,600 mm, total height: 30,003,500 mm, water tank capacity: 25,000 l, External dimensions: W 2600 mm, H 3000/3500 mm, L 5300 mm. Gedewnn Apjpfx Afnjtu Horizontal stainless steel tanks – 2 units. Manhole at the front 2.5" outlet at the end. AISI 304.

Condition: used, 50 m3 / 50,000 l horizontal steel tank Diameter: 2.50 m Length: 10 m Gsdpfx Ajxtmzxjfnjtu Weight: 16 t The tank is pressurized. Steel thickness: 20 mm / 2 cm Pressure: up to 20 atmospheres Steel cradles (legs) included

Condition: refurbished (used), 105m3 horizontal steel tank with heating coil Gjdpexqfwtjfx Afnotu Diameter: 2.80m Length: 17.10m

Condition: like new (used), Horizontal carbon steel tanks 73.000l Dim. 3x 11m Cyllinder thickness 8mm Bottom thickness 12mm Equipped with a ladder. Gjdpfx Asibh S Hsfnjtu

Condition: ready for operation (used), Year of construction: 2000, operating hours: 30,325 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 625 mm, controller model: Fanuc OSP-U100M, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 560 mm Travel Z-axis: 625 mm Spindle speed range: 15,000 rpm Spindle motor power: 15/11 kW Rapid traverse x/y/z: 30 m/min Tool magazine positions: 40 SK40 Pallet size: 2 x 400 x 400 mm Table load capacity: 0.4 t Table indexing: 1° MACHINE DETAILS Control: Fanuc OSP-U100M Total power requirement: 49 kVA Dimensions & Weight Space required: approx. 3.2 x 2 x 2.5 m Machine weight: approx. 11 t Operating Hours Power-on hours: 87,298 h Occupancy time: 73,834 h Cutting hours: 30,325 h EQUIPMENT Chip conveyor Gtjdpfsyc Uquox Afnju Interface for internal coolant supply

Condition: ready for operation (used), Year of construction: 1999, operating hours: 24,364 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Fanuc MSC 501 (Fanuc 16i), spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS X-axis travel: 560 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Spindle speed range: 10,000 rpm Spindle motor power: 22 kW Rapid traverse (x/y/z): 32 mm/min Tool magazine capacity: 40 (SK40) Pallet size: 2 x 400 x 400 mm Table load: 0.5 t Table indexing: 1° Gtjdpfxoyc Unms Afnou MACHINE DETAILS Control: Fanuc MSC 501 (Fanuc 16i) Total power requirement: 56 kVA Dimensions & Weight Required space: approx. 2.9 x 4.1 x 3 m Machine weight: approx. 8.7 t Operating hours: 24,364 h EQUIPMENT Chip conveyor Interface for internal coolant supply

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 113253, functionality: fully functional, overall weight: 14,000 kg, table length: 4,500 mm, working width: 260 mm, working height: 150 mm, working length: 4,500 mm, The submission of a bid obligates the buyer to dismantle the machine between April 1, 2026, and April 3, 2026. TECHNICAL DETAILS Working area X-axis: 4,500 mm Working area Y-axis: 260 mm Working area Z-axis: 150 mm Table length: 4,500 mm Gtjdsyh Uxyopfx Afnou Number of milling spindles: 1 unit Tool changer positions: 24 units MACHINE DETAILS Power consumption: 63 A Fusing: 80 A Power output: 32.0 kW Voltage: 400 V Total height: 2,900 mm Weight: 14,000 kg EQUIPMENT Electrical diagrams (NL, DE, hardcopy) Spare parts list (NL, DE, hardcopy) User manual (NL, DE, hardcopy) Boring tool Note: The machine is sold without tools.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, spindle speed (max.): 3,500 rpm, travel distance X-axis: 271 mm, travel distance Y-axis: 600 mm, center width: 600 mm, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Swing diameter over bed: 350 mm Distance between centers: 600 mm Bed width: 210 mm Travel X-axis: 271 mm Travel Y-axis: 600 mm Gsdoyh Npmspfx Afnstu Spindle bore: 62 mm Max. spindle speed: 3,500 rpm MACHINE DETAILS CNC control manufacturer: Siemens Power: 30.0 kW Dimensions & Weight Dimensions (L x W x H): 4,300 x 2,100 x 2,100 mm Unladen weight: 5,000 kg Transport weight: 5,000 kg EQUIPMENT Chip conveyor Three-jaw chuck Bar feeder Driven tools C-axis

Condition: ready for operation (used), functionality: fully functional, turning diameter over bed slide: 630 mm, center height: 315 mm, center width: 8,000 mm, spindle speed (max.): 1,180 rpm, empty load weight: 9,000 kg, TECHNICAL DETAILS Gjdpfxeyh Nk Rs Afnetu Centre height: 315 mm Centre distance: 8,000 mm Swing diameter over bed: 630 mm Swing diameter over cross slide: 360 mm Bed width: 700 mm Spindle bore: 62 mm Max. spindle speed: 1,180 rpm MACHINE DETAILS Control: Conventional Connected load: 22.0 kW Dimensions & Weight Dimensions (L x W x H): 10,560 x 1,710 x 1,400 mm Unladen weight: 9,000 kg EQUIPMENT Digital readout

Condition: ready for operation (used), Year of construction: 2010, operating hours: 27,052 h, functionality: fully functional, machine/vehicle number: 11680001673, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 12,000 rpm, The machine spindle was replaced in 2017! Machine equipped with KUKA loading robot! TECHNICAL DETAILS X-axis travel: 560 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Number of axes: 4 Maximum workpiece weight on table: 500 kg Maximum workpiece height: 850 mm Maximum workpiece diameter: 630 mm Table rotation speed: 40 rpm Table clamping torque: 1,580 / 2,300 Nm Maximum torque: 1,550 Nm Pallet changer dimensions (L x W): 400 x 400 mm Maximum pallet changer workpiece weight: 500 kg Number of tools in the tool changer: 120 Maximum tool diameter: 80 mm Tool diameter with free adjacent slots: 160 mm Maximum tool length: 400 mm Maximum tool weight: 12 kg Tool holder: HSK 63 DIN 69893 Form A Spindle diameter: 225 mm Spindle speed: 0 – 12,000 rpm Feed speed: 0 – 60,000 mm/min Rapid traverse: 60 m/min Maximum feed force: 10 N MACHINE DETAILS Control system: HEIDENHAIN iTNC 530 Spindle drive power: 20 kW Connection: 50 Hz 3x 400 V Total power requirement: 58 kVA Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,700 x 2,700 mm Machine weight: approx. 9,700 kg Gtjdpfx Afjyhnpzsnsu Operating Hours Power-on time: 75,886 hours Operating time: 27,052 hours EQUIPMENT Loading robot KUKA High-pressure coolant system Coolant through spindle (IKZ) 40 bar Spindle taper air purge Probe Chip conveyor Pallet storage rack Setup stations (number): 60 (3x20) Lighting Rinse gun Rotating viewing window Electrical cabinet air conditioner Foot pedal Status indicator lamp

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 20, controller model: GE FANUC 15-MB / 4 axis, spindle speed (max.): 12,000 rpm, number of axes: 4, TECHNICAL DETAILS Number of axes: 4 Number of pallets: 7 Pallet size: 320 x 320 mm Godpfx Aeyhnc Ujfnetu Number of tools: 96 Tool holder: ISO 40 Max. spindle speed: 12,000 rpm MACHINE DETAILS Control: GE FANUC 15-MB / 4 axis Connection: 50 Hz 3x 380 V EQUIPMENT Coolant system Through-spindle coolant (IKZ) Tool breakage monitoring Chip conveyor Spindle cooling

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 41, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 300 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 500 mm B-axis: Available Number of pallets: 4 Pallet dimensions: 400 x 400 mm Maximum workpiece weight: 300 kg Number of tools: 96 Maximum tool diameter: 80 mm Diameter with adjacent tool pockets empty: 160 mm Maximum tool length: 300 mm Maximum tool weight: 12 kg Tool change time: 2.5 s Average chip-to-chip time: 6 s Tool holder: ISO 40 DIN 69871 Distance spindle to table: 100 - 600 mm Distance vertical spindle to table: 20 - 420 mm Maximum spindle speed: 12,000 rpm Feed rate: 1 – 12,000 mm/min Rapid traverse: 20 m/min MACHINE DETAILS Control: GE FANUC Series 16-T Compressed air connection: 6 bar Connection frequency: 50 Hz Connection voltage: 3x 400 V Spindle power: 5.5 / 7.5 kW Total power consumption: 60 kVA Noise level: 75 dB (A) Dimensions & Weight Dimensions (L x W x H): 4,330 x 3,200 x 2,520 mm Machine weight: approx. 6,000 kg EQUIPMENT Coolant system 500 l High-pressure coolant system 65 bar Paper filter system 3D probe RENISHAW Chip conveyor Godpfx Aeyhnchjfnstu Coolant / mist extraction Spindle cooling

Condition: used, Used Kleiser GmbH approximately 16sqmt horizontal shell and tube heat exchanger. Unit has (68) 316L stainless steel tubes approximately 3,000mm long x 25mm outside diameter, rated 6 bar design pressure at 100 deg.c. 316Ti stainless steel shell approximately 3,000mm long x 324mm diameter, rated 6 bar design pressure at 100 deg.c. (2) 316Ti stainless headers. Unit has 2 support mounts. Weight: Estimated: Kg 690.0 Gtsdpfeyh I Unox Afneu

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, nominal power (apparent): 61 kVA, torque: 1,675 Nm, controller manufacturer: FANUC, controller model: 18iMB, workpiece weight (max.): 1,200 kg, table width: 630 mm, table length: 630 mm, spindle speed (max.): 6,000 rpm, distance table to spindle center: 875 mm, distance table center to spindle nose: 1,000 mm, spindle nose: ISO #50 7/24 Taper, number of spindles: 1, number of slots in tool magazine: 40, ACE-HM630 – Specifications Travel X-axis (table longitudinal travel): 1,000 mm Y-axis (head vertical travel): 800 mm Z-axis (column cross travel): 850 mm Distance from spindle center to pallet top: 75–875 mm Distance from spindle nose to table center: 150–1,000 mm Table Pallet type: 24-M16 × P2.0 Tap Indexing degree: 0.001° Table loading capacity: 1,200 kg Pallet size: 630 × 630 mm Spindle Max spindle speed: 6,000 rpm Spindle taper: ISO #50 7/24 Taper Max spindle torque: 1,675.8 N·m Gtjdpex Ad Nlofx Afnou Feedrate Rapid traverse (X/Y/Z): 24 m/min Cutting feedrate: 1–12,000 mm/min Automatic Tool Changer Tool shank: MAS 403 BT50 (DIN, CAT) Tool storage capacity: 40 Max tool diameter: 135 mm Max tool diameter (without adjacent tools): 250 mm Max tool length: 400 mm Max tool weight: 25 kg Max tool moment: 34.3 N·m Tool selection method: Fixed address Tool changing time (tool-to-tool): 2.5 sec Tool changing time (chip-to-chip): 8.5 sec Automatic Pallet Changer Number of pallets: 2 Type: Rotary Pallet change time: 25 sec Pallet rotation in loading station: 90° index Power Source Electrical power supply (rated capacity): 60.7 kVA Compressed air supply: 0.54 MPa Tank Capacity Coolant tank: 550 L Lubrication tank: 4.3 L Machine Size Machine height: 3,041 mm Machine dimensions (L × W): 6,485 × 3,857 mm Machine weight: 18,000 kg

Condition: good (used), Year of construction: 2000, MORI SEIKI SH-503/40 TWIN PALLET CNC HORIZONTAL MILLING MACHINE WITH MORI SEIKI MSX-502III CONTROL UKUK Pallet Dimension 500 x 500mm. Maximum Table Load 1,000kg. Axis Travel X'=630mm, 'Y'=600mm, 'Z'=650mm, 'B'=1° Increment. Rapid Traverse 'X,Y,Z'=32m/min. Spindle Taper BT40. Maximum Spindle Speed 12,000rpm (22kW Motor). 120 Position ATC. Maximum Tool Ø150mm (Without Adjacent Tools), Maximum Length 360mm, Maximum Tool Weight 12kg. S/No. 1212 (2000). DESCRIPTION With Renishaw OMP 600 Spindle Probe, Blum Laser Tool Setting/Breakage Unit, Dual Auger To FSE Chip Conveyor, Through Coolant Filtration System, Oil Chiller, Filtermist Mist Extraction Unit, Handwheel & Signal Tower. Overall Dimensions L4,500 x W2,725 x H3,267mm. Weight 14,900kg. Note: Tooling & Tombstones Not Included. Gtodpfxsxqt Tio Afnsu