Used Turbocharger Balancing for sale (937)

Condition: new, Turbocharger core balancing machine DBST-20 Low-speed turbocharger core balancing machine meets the needs of turbocharger repair workshops. Machine is used for balancing common truck and passenger car turbos. It is multi-functional and universal, so it is suitable for many large turbochargers of special vehicles, railroad and marine turbines, and even for industrial turbochargers of gas and diesel power plants. The DBST-20 is used for balancing common truck and car turbochargers. It is multifunctional and universal, so it is suitable for many large turbochargers of special vehicles, railway and marine turbines, and even industrial turbochargers of gas and diesel power plants. This stand allows for the final balancing of cartridges due to the specific design features of large turbines. The stand is used for balancing turbocharger cartridges at low speeds, as well as for checking turbocharger cartridge oil leaks. This is a larger version of the DBST-10 model that our company has developed specifically for large turbochargers weighing up to 30 kg. HIGHLIGHTS High accuracy of determining the unbalance of the rotor (0.4 g ∙ mm / kg). Reinforced torsional vibration suspension - high accuracy of vibration transmission, quality balancing results. Mounting the cartridges on their standard surfaces (as on the engine) allows the installation of almost all turbochargers. Hedpfx Ahen Nxcfj Henw Wide range of accessories and adapters for installing any kind of turbos. Includes adapters for installing turbochargers with lower oil inlet. Oil system with oil heating allows to recreate similar conditions to the real one during balancing. 3-stage system of oil filtration allows to eliminate an unbalance directly on the machine by portable grinders. The measuring system displays the balancing process in real time and monitors the rotor unbalance behaviour on the screen to achieve the best possible result. Rotor adjustment and machine calibration are performed by the operator, ensuring maximum machine sensitivity at all times. Safe turbo shaft speed allows risk-free quality running-in of assembled cartridges, which significantly increases cartridge reliability after repair. KEY FEATURES • High accuracy 2 plane balancing • Truck and car turbocharger balancing • Any turbocharger can be installed • All type turbocharger adapters included • Quick and easy turbo core installation • Balancing speed up to 10 000 rpm • Fast oil heater and temperature regulation • 3-stage oil filtration • Real-time unbalance measurement • Calibration of the machine by the operator • Industrial fanless touch screen PC control system • Creation and printing of reports on turbocharger balancing SPECIFICATIONS Maximum turbocharger weight 30 kg Maximum turbocharger diameter 300 mm Maximum turbocharger length 300 mm Maximum rotation speed 10 000 rpm Minimum achievable residual specific imbalance, 0,4 g mm/kg Pneumatic system operating pressure 0,6 – 0,8 MPa Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1120 х 780 х 1350 mm Weight 285 kg

Condition: used, color: other, Empty weight: 3 kg Hjdpopz I Duofx Ah Hsnw Not tested. No guarantee. Please contact us if you can't find what you are looking for.

Condition: used, color: other, Empty weight: 3 kg Not tested. No guarantee. Please contact us if you can't find what you are looking for. Hsdpfxsphniue Ah Honw

Condition: used, color: other, Empty weight: 2 kg Not tested. No guarantee. Please contact us if you can't find what you are looking for. Hedenvfivepfx Ah Hsnw

Condition: good (used), Technical data of the shim: Manufacturer: Bito (M) Included in delivery: 01x shim, used Material color: sendzimir galvanized total width: approx. 150 mm total depth: approx. 105 mm Hnedpfx Ahei Hkngj Hsw material thickness: approx. 4,00 mm hole distance (center - center hole): approx. 120 mm Weight: approx. 0.46 kg | pcs.

Condition: good (used), Year of construction: 2015, Lot consists of: (1) CNC Crankshaft Control Balancing Machine Position consists of: (1) CNC crankshaft control balancing machine Technical Details/Technical Details: English: max crankshaft length 800mm, max dia 300/200mm, max weight 50kg, bearing dia 30 - 80mm, balancing speed 200-650 rpm, 230V 50Hz, LxWxH,:1.3x1x1.5m Parts Gantry System and/or Cranes are not included in the scope. German: Hnodpfx Ahjwg A Sij Hjw Maximum crankshaft length 800mm, maximum diameter 300/200mm, maximum weight 50kg, bearing diameter 30-80mm, balancing speed 200-650 rpm, 230V 50Hz, LxWxH: 1.3x1x1.5m Parts gantry system and/or cranes are not included in delivery.

Condition: used, grinding wheel weight max. 20 kg Hsdsw T Tvwjpfx Ah Hjnw grinding wheel diameter 320 mm grinding wheel width max. 140 mm range L-W-H 0,41 x 0,27 x 0,36 mm weight 4,9 / 9,7 kg balancing scales Hofmann NG-1, Test pin length 178 mm, spigot 15 mm diameter. Machine dealer with own stock of 1600 m² and certification of the database "Machineseeker".

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 07/01/7824, We are happy to provide technical information. - Unbalance offset by +50° Hodpfextc Alox Ah Hsnw - Speed in second gear is too high for our heavy workpieces - Brake lever defective, machine brakes by itself - Screen scaling shifted to the left - Only one balancing adapter available

Year of construction: 2024, condition: like new (used), Cimat Turbotest Duo with rotor speed sensor. The machine is practically like new, freshly serviced and certified. Still one year of warranty remaining. Balancer and TurboTester in one housing. Cables for control units and adapters included. Hjdpexuhzvsfx Ah Hjnw

Condition: as good as new (ex-display), Compact balancer with vertical spinning axis and load capacity up to 50 kg. Thanks to its compact design, the machine takes up relatively little space and does not require foundations, so it can be easily relocated to the desired location. The balancing process is controlled by the latest measuring system "ROTORTEST 9.5" with dedicated software equipped with workshop programs, which convert the unbalance into a convenient correction method, e.g. into drilling or milling parameters. Vertical axis balancing machine is recommended for balancing rotors mounted on a bore, e.g. fan rotors, pulleys, flywheels, tools, pumps and many others. The biggest advantages of this type of balancing machine are its universal application, the possibility of using dedicated self-centring chucks giving high measuring accuracy, simple and quick calibration method, so called "manufacturer's calibration", which does not require calibration runs to be carried out before starting the measurements. The whole procedure consists only in entering basic rotor parameters into the software. This machine is an excellent choice for balancing single pieces of various rotor models, and in particular for balancing large series of the same rotor model. Parameters Maximum rotor weight - 50 kg Maximum rotor diameter - 650/850 mm Maximum rotor height - 500 mm Hedpfjf Nvwpjx Ah Honw

Condition: good (used), Technical data of the shim: Manufacturer: Polypal Included in delivery: 01x shim, used Total width: approx. 130 mm total depth: approx. 85 mm material thickness: approx. 1,50 mm Drill hole Ø: approx. 15 mm number of drill holes: 2 pcs. Weight: approx. 0.12 kg | pcs. Hjdoi Hkm Ujpfx Ah Honw

Condition: good (used), Year of construction: 1996, Test specimen diameter: 320 mm Test specimen width: 140 mm Hnedpfx Aov E D Nuoh Hsw Test specimen weight: 20 kg Test mandrel length: 178 mm Test mandrel pin diameter: 15 mm Weight: 4.7 kg Space required: 420 x 280 x 350 mm

Condition: used, workpiece weight 100 kg Hodpfxjv Nq Sws Ah Henw workpiece length 1000 mm diameter 500 mm centre height 280 mm total power requirement 2,5 kW weight of the machine ca. 1 t dimensions of the machine ca. 1,6x 1x1,6 m

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, TECHNICAL DETAILS Maximum balancing weight: 2,000 kg Balancing body diameter without machining unit: 10 mm Bed length: 3,000 mm Swing diameter over machine bed: 2 mm Rotor shaft via belt drive: 10 mm Drive unit balancing speed (5 gears): Max. 80 / 160 / 290 / 470 / 630 rpm Measurement method: force measuring Electronics speed measurement range: 60 to 30,000 rpm Center height measured in bed: 1,200 mm Rollers: 2x 195 x 56 mm Axle spacing: 205 mm Adjustment travel: 3 mm vertical MACHINE DETAILS Drive power: 22 kW Compressed air: 6 bar Connected load: 25 kVA / 20 kW Machine weight: approx. 5,500 kg Machine dimensions approx. (L x W x H): 3.3 x 1.5 x 2.0 m Control cabinet dimensions: 6 x 610 x 21 mm EQUIPMENT - Measuring electronics PCX - Base frame (cast steel body) - Mounting length between bearing supports up to approx. 3,000 mm Hsdpfx Aow T Sqmoh Henw - Adjustment with hand ratchet via rack - Bearing supports/swing bearing blocks: 2 pieces

Condition: used, Year of construction: 2014, operating hours: 80,000 h, functionality: fully functional, overall weight: 10,000 kg, power: 350 kW (475.87 HP), fuel type: electric, volume flow: 3,180 m³/h, operating pressure: 8 bar, pressure (max.): 8.5 bar, type of cooling: water, Equipment: documentation/manual, type plate available, Operational frequency-controlled turbo compressor up to 53,000 liters per minute Hodpfjw N Hdyjx Ah Honw

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: HT847813, overall weight: 180 kg, high-performance turbochargers for large diesel and gas engines Hedpfx Aexrdugoh Honw

Condition: good (used), Technical data for the shim: Manufacturer: Bito Included in delivery: 01x shim, used Material color: sendzimir galvanized total width: approx. 140 mm total depth: approx. 105 mm material thickness: approx. 1,50 mm hole distance (center - center hole): approx. 110 mm Hnodpfsi Hknyjx Ah How Weight: approx. 0.15 kg | pcs.

Condition: used, Electrodynamic balance shaft balancing machine, vertical balancing machine, balancing machine Hnodswgnu Nopfx Ah How SCHENCK RoTec Type EBLY Manufacturer No. 1FLY, Year of Manufacture 2000 Workpiece/Test Specimen: Balance shafts Number of measuring planes: 2 Number of balancing planes: 2 Angle of balancing components: 145 - 215° Test specimen weight: max. 10 kg Indicated unbalance: 2 gmm/square Lowest value per scale value: 8 gmm/square Balancing spindle speed: 1200 rpm Scale disc with test specimen holder Ø 320 mm Test specimen diameter max. 400 mm Vibration sensor: P01 force sensor Angle position sensor: HBBC incremental encoder CAB 750 microprocessor measuring device RS232 serial interface Workpiece weight: 2.2 kg Workpiece length: 250 mm Workpiece diameter: 70 mm Power supply: 400 V, 50 Hz Rated current: 16 A - SCHENCK M341 balancing indicator Space requirement: L x W x H: 2000 x 1800 x 2000 mm Weight: 620 kg Good condition

Condition: excellent (used), The Schenck TB Comfort is a horizontal hard-bearing balancing machine, designed for high-precision balancing of turbocharger rotors, in particular turbine wheels with shaft as well as compressor wheels. It covers a wide range of speeds and rotor sizes, with a maximum rotor power of 200 W and a maximum rotor diameter up to 350 mm. Hodpfsw N Rg Eox Ah Hjnw

Condition: new, Year of construction: 2025, FEATURES BENEFITS Compact design Integrated air supply Utilises your existing workshop air supply, 7 bar, clean dry air requirement It has the ability to measure digital and analogue wastegates on all vehicle models. With its 23.5-inch full touch screen and simple interface, it is very easy to use. Can be used without an internet connection Built-in database of more than 1900 references Hnodpfeq Trzfjx Ah Hsw Flow adjustment possible for all types of turbochargers up to 200 kg/h Calibration test plates provided to easily verify machine accuracy All types of turbochargers can be easily connected with 6 adapters included as standard. G3 REA-Master (USB) Controller Built-in complete with 14 cables 12 volt and 4 cables for 24 volt It displays and adjusts the current, voltage and position values of the Turbo VGT turbochargers. It can test all types of turbos with electronic, vacuum and vacuum sensor. Operates on 200 volts of electricity Calibration test plates supplied for easy verification of machine accuracy Supports PWM, FDCan, Can 2.0, Linbust, j1939 automatic communication protocols You can assign programmes to activators Quick-release mounting flange with adapters Machine weight 150kg Full CE Accreditation INCLUDING 1 x FX1 Flowbench Machine 1 x Touch Screen Monitor 14 x R.E.A. Cables 4 x 24 v Cables (OPTIONAL) 3 x C-Clamps 1 x Magnetic Stand

Condition: good (used), Technical data for the shim: Manufacturer: Bito Included in delivery: Hnodpfx Ahji Hknvj Hjw 01x shim, used Material color: sendzimir galvanized total width: approx. 140 mm total depth: approx. 105 mm material thickness: approx. 4,00 mm hole distance (center - center hole): approx. 110 mm Weight: approx. 0.41 kg | pcs.

Condition: good (used), Included in delivery: 01x shim, used Hodpsi Hkncefx Ah Honw Total width: approx. 135 mm total depth: approx. 130 mm material thickness: approx. 1,50 mm Hole spacing (center - center hole): 45 mm Weight: approx. 0,19 kg | pcs.

Condition: good (used), Technical data for the shim: Manufacturer: Bito (L) Included in delivery: 01x shim, used Material color: sendzimir galvanized total width: approx. 120 mm total depth: approx. 105 mm material thickness: approx. 4,00 mm Hedpfx Aji Hkn Doh Hsnw hole distance (center - center hole): approx. 95 mm Weight: approx. 0.37 kg | pcs.

Condition: good (used), Technical data for the shim: Manufacturer: Bito (L) Included in delivery: Hnjdpfxsi Hkn Ij Ah Hew 01x shim, used Material color: sendzimir galvanized total width: approx. 120 mm total depth: approx. 105 mm material thickness: approx. 1,50 mm hole distance (center - center hole): approx. 95 mm Weight: approx. 0.14 kg | pcs.

Condition: good (used), Technical data of the shim: Hnjdpfxei Hknke Ah Hjw Manufacturer: Bito (M) Included in delivery: 01x shim, used Material color: sendzimir galvanized total width: approx. 150 mm total depth: approx. 105 mm material thickness: approx. 1,50 mm hole distance (center - center hole): approx. 120 mm Weight: approx. 0.18 kg | pcs.