Used Tables for sale (16,156)

Condition: used, machine/vehicle number: 008356, X axis working area: 3650 mm Y axis working area: 1560 mm Working Table: Flat table Gedjx Swf Iopfx Admstt Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 26

Condition: excellent (used), Opportunity from liquidation: Automation by Wemhöner was installed on a Weinig, including control system. Gtsdpew S E Ezsfx Admot

Condition: used, Year of construction: 2011, input voltage: 400 V, input current: 32 A, type of input current: three-phase, Equipment: documentation/manual, We are offering this used robotic welding cell with 2 manual turntables, year of manufacture 2011. 1x KUKA welding robot KR 16L6 with two HDP200 manual turntables. The system is installed but no longer in use. Sale from site as seen. Gtsdpex Tab Isfx Admet Type: RWS 1100 / 2×HDW Serial number: 09.09.594.000.000 Year of manufacture: 03/2011 Power rating: 36.8 kVA Nominal voltage: 3×400 V Nominal current: 32 A Frequency: 50 Hz If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, 2 Ultra Low Profile Pallet Platform Lift Tables Model HY1501 1500 kg capacity 240 Volt Platform 1600mm x 800mm Gjdpsh Rkmwefx Admott Low profile 100mm from floor Safety bars Ramp included Electro hydraulic power pack Operator controller In excellent condition

Condition: excellent (used), Year of construction: 2005, roll width: 700 mm, total width: 800 mm, total length: 2,600 mm, power: 1.5 kW (2.04 HP), 2 WTT Fördertechnik - hydraulic scissor lift tables with driven roller conveyor. Type: E.20.16.8.2.0.RB, Length - 2600mm, width - 800mm roller width 700mm Load capacity 2000kg each Gsdpfx Adsuyhltjmjtt Lifting height max 2000mm

Condition: excellent (used), functionality: fully functional, This is a café setup consisting of: 2 benches, 120 cm long and 64 cm wide, 30 chairs (13 larger and 17 slightly smaller), and 12 tables, each 120 cm long and 60 cm wide (seating group). As new condition. Immediately available. Gtsdsr A Hdcjpfx Admet

Condition: used, machine/vehicle number: 008388, X axis working area: 3086 mm Y axis working area: 2185 mm Working Table: Flat table Gsdpjx Swfzofx Admstt Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 20

Year of construction: 2010, condition: good (used), 2.pcs. ALU tables for measuring machine Make MEUSBURGER Type:BST 5500 Year 2010 Dimensions length 5500 mm width 1200 mm height 700 mm Godpfx Adsg Uf Ngsmjtt In good condition.

Condition: used, Year of construction: 2019, functionality: fully functional, • Rund 20 Meter lang ist die industrielle LISEC Produktionslinie, die in bis zu 350 cm Breite LISEC Transporteinheit 33/40 Pyrosil System 500 HE (Pyrosil application for UV Ink) LISEC Transporteinheit 33/45S Primer Station 500 HE LISEC Transporteinheit 33/68 LISEC Transporteinheit 33/28 mobil Abluftanlage Vorbehandlung LISEC Anlagensteuerung Gjdpfsv Ibmpox Admjtt Eine gesamte Produktionsanlage besteht aus der Reinigung, der Beflammung, dem Primer sowie den jeweiligen Transportbändern zwischen den Stationen. • Werden nach der Reinigung auf einen mobilen Tisch abgelegt, zum Beladeband gefahren wird, wo das Glas vom Transportband der Produktionslinie übernommen wird. und den Transport durch die Beflammung und den Primer steuert. In der Beflammungsstation wird das Glas mit einer offenen Flamme im Durchlaufverfahren beflammt. Das verbessert die Gleichmäßigkeit der Oberflächenspannung des Glases, verbrennt Rückstände oder Schmutz der beim Waschen nicht entfernt wurde und verbessert mit Silangas die Haftung des Primers. Ein Pufferband transportiert das Glas in die Primerstation, in der aus vier Düsen in hoher Geschwindigkeit der Haftvermittler auf das Glas gesprüht wird. Dann läuft das Glas auf das lange Positionierungsband, dass einerseits als Puffer dient und gleichzeitig das Glas rechtwinklig in exakter XY-Richtung ausrichtet. Die elektonische Steuerung der rund 20 Meter langen Produktionslinie nimmt Rücksicht auf das Format der jeweiligen Glasscheiben bei der Beflammung und beim Primen und überwacht mit Sensoren ihren Transport. • LISEC production line is about 20 meters long An entire production line consists of the cleaning, flame, primer and printing press as well as the respective conveyor belts between the stations. • After cleaning, are placed on a mobile table, which is driven from the printer to the loading belt, where the glass is taken from the conveyor belt of the production line. receives the print jobs from the prepress department and controls the transport through the flame and the primer. In the flame station, the glass is flame-flamed with an open flame in the continuous process. This improves the uniformity of the surface tension

Condition: used, table length 1540 mm table width 1140 mm stroke height 880 mm 90 mm weight max. in kg 1000 kg connected load frequency 400 V weight of the machine ca. 0,2 t dimensions of the machine ca. 1,5 x 1,2 x 1,0 m Godpfx Adsxz Hgqsmott

Condition: ready for operation (used), BELANGRIJKSTE KENMERKEN: Tafelafmetingen: 3000 x 3500 mm Omgeschreven cirkel: 4300 mm Toelaatbare belasting (gelijkmatig verdeeld): 50 ton op 3000 x 3500 mm Totale tafelhoogte zonder cilinder: 1.250 m Aantal T-gleuven, breedte 36 H7: 13 T-sleufafstand: 250 mm Lengteverplaatsing: 2700 mm Longitudinale voedingen / bed: • positionering: 2 mm/min • werkend: 1 tot 3000 mm/min • snel: 3000 mm/min Circulaire feeds: • werkend: 0,0006 tot 0,6 tpm • snel (50-tons belasting): 0,6 tpm Gtodpfx Adexpggyomst Nominaal koppel van longitudinale motor/bed: 9,4 mkg Nominaal koppel van cirkelmotor/tafel: 22 mkg Totaal geïnstalleerd vermogen: 50 kVA Tafelgewicht (zonder elektrische apparatuur): 31.000 kg

Condition: new, A self assembly heavy duty modular timber frame table suitable for framing and boarding of panels. The modular 2m or 3m x 1m tables can be assembled in various configurations, to suit either wall panels or floor cassettes. Gtodsn Up R Iepfx Admot 4 off 2m / 3m x 1m Modular tables suitable for frames up to 4m / 6m x 2.8m PLY top with channel for fitting (optional) pop up rollers Complete with: 1 fixed infill for spacing the table to 2.8m capacity 1 sliding infill for supporting subcomponents inside the panel. 9m of fixed fence (6m length x 3m width) Working Height 700 - 850mm

Condition: used, machine/vehicle number: 008381, X axis working area: 4250 mm Y axis working area: 2280 mm Working Table: Flat table Godox Swc Hopfx Admstt Main Electrospindle power: 7.5 KW Number of controlled axes: 5 axes Total number of drilling spindles: 11 Total number of tool changer positions: 24

Condition: used, Year of construction: 2025, 1x table 12 m x 2 m 10x table height adjusters Gedjx Ev Tdjpfx Admstt 3x tables 3 m x 9 m

Condition: new, Commission and transport trolleys, as well as assembly tables for your company. Gtodpfxed Rhx Ae Admot Our wagons and tables are specially manufactured according to customer-specific requirements. (length, width, height, materials according to customer requirements) We will be happy to make you a suitable offer.

Condition: good (used), Year of construction: 2022, functionality: fully functional, Metal Band Saw MEP - SHARK 281 CCS Year of manufacture: 2023 Max. vice opening: 285 mm Godexvyiuepfx Admett Saw blade dimensions: 2950 × 27 × 0.9 mm Saw blade speed: 36 / 72 m/min (2 steps) Motor power: 1.5 / 1.8 kW (three-phase) Coolant tank capacity: 22 liters Working height: 860 mm Machine weight: approx. 370 kg Dimensions (approx.): W: 1785 mm, D: 1000 mm, H: 1650 mm 3D Scanner Solutionix D500 Year of manufacture: 2022 Feature Specification Camera technology: 2 × 2.0 MP cameras Light source: Blue LED Measurement accuracy: Up to 0.01 mm Point-to-point distance: 0.056 mm Scan area (FOV): 92 × 70 × 60 mm Measurement range: Up to approx. 120 mm Volumetric capture area: Up to 385 mm³ Turntable: Integrated, fully automatic Calibration: Fully automatic Texture capture: High-resolution, without additional color cameras Interface: USB 3.0 Type B Software: ezScan 2017, compatible with Geomagic DesignX & ControlX Typical applications: Jewelry, precision engineering, reverse engineering, cultural heritage, 3D printing Assembly Table MT-400 Year of manufacture: 2015 Feature Specification Load capacity: up to 400 kg Max. plate size: 1200 × 1900 mm Height adjustment: Electric, stepless, 750–1150 mm (partially up to 400 mm stroke) Tilt adjustment: Electric, 0–90° Support frame: With variable extension up to 300 mm Plate fixation: By vertical or quick clamps Mobility: 4 swivel castors with total lock Installation aid: Roller bar for sliding the plate into the control cabinet Material: Powder-coated steel base frame, MiniTec standard profiles

Condition: used, machine/vehicle number: 007691, X axis working area: 2440 mm Y axis working area: 1220 mm Working Table: Flat table Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 8 Gsdpou Rigyefx Admstt

Condition: used, machine/vehicle number: 005583, X axis working area: 3680 mm Y axis working area: 2040 mm Gtedpotwgirsfx Admjt Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 12

Condition: used, machine/vehicle number: 006279, X axis working area: 3100 mm Y axis working area: 1250 mm Working Table: Flat table Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 8 Gtodpfjkw H Ekex Admst

Condition: used, machine/vehicle number: 006228, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Gtodex Idxtepfx Admst Total number of drilling spindles: 7 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 005947, X axis working area: 2500 mm Y axis working area: 4300 mm Main Electrospindle power: 12 KW Gjdpfx Aex Idw Aodmett Number of controlled axes: 4 axes Total number of tool changer positions: 28

Condition: used, machine/vehicle number: 007686, X axis working area: 3765 mm Y axis working area: 1560 mm Working Table: Flat table Gjdpfx Adou Tliyemett Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 18 Total number of tool changer positions: 12

Condition: used, machine/vehicle number: 008170, X axis working area: 4300 mm Y axis working area: 2250 mm Working Table: Flat table Godpfxox A Tcuo Admjtt Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 12 Total number of tool changer positions: 14

Condition: used, machine/vehicle number: 007601, X axis working area: 4320 mm Gtodpfx Adju N Skfemot Y axis working area: 2245 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 16 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 008088, X axis working area: 3700 mm Y axis working area: 2100 mm Working Table: Flat table Main Electrospindle power: 9 KW Gsdpfx Aex A Hbqsdmott Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 14