Used Surface for sale (6,831)

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits Crsdpfxsxqzmkj Ahusi The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Year of construction: 1998, condition: good (used), CHEVALIER FSG 1640 AD SURFACE GRINDING MACHINE MAKE CHEVALIER, MADE IN TAIWAN MODEL FSG-1640 AD YEAR 1998 TABLE SIZE 1000 x 400 mm Cedpfx Asirfpgehueri GRINDING WHEEL SIZE 445 mm TRAVERSES 400 x 1000 mm MAX HEIGHT FROM TABLE TO SPINDLE CENTRE 445.0 mm TOTAL POWER REQUIRMENT 7.4 kW PLUS AUTOMATIC DOWN FEED WHEEL-MOUNTED WHEEL DRESSER SYSTEM HYDRAULIC MOVEMENT COOLANT SYSTEM 400.0 x 1000.0 mm ELECTRO MAGNETIC CHUCK MACHINE MANUALS

Condition: new, functionality: unexamined, machine/vehicle number: PST400, Complete multi-stage industrial washing system with stainless steel tank structure, ultrasonic cleaning, oil separation, demineralized and ultrademi water washing, hot air drying, and integrated filtration. Equipped with digital temperature control, automated regeneration system, and safety containment basin. Ideal for precision cleaning applications in surface treatment. Cjdpfxjxfrg Rj Ahujri

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: Inv.119140, total length: 26,000 mm, total width: 9,000 mm, Equipment: cabin, lighting, 1 used painting line, featuring circulating conveyor belt, manual spray booth for sample coating, automatic spray booth equipped with robot and workpiece rotary holder, reverse osmosis system for DI water, paint preparation, and exhaust air treatment system. The system operates two shifts in serial production. Manual loading and unloading onto a conveyor belt; otherwise fully automatic. 18.7.25: Update: Dismantling is to be carried out from September 2025 on-site in Lohr by the buyer. The buyer is responsible for all costs related to dismantling, packaging, collection, and transport to their own facility (FCA terms). The area must be vacated no later than mid-January 2026 for installation of new production machines. For further details, see attached handout/flyer. Due to the significant effort required for dismantling, early and thorough planning with the disassembly company is essential, as is prompt contact or a visit to the site. Additional information is provided in the attached handout. --- 1 used painting line, with circulating conveyor, manual paint booth for samples, automatic paint booth with robot and workpiece rotary fixture, reverse osmosis system for DI-water, paint preparation, exhaust air treatment. Info in English, French, Spanish available upon request. --- Please indicate your offer price. Sale only within the EU, Switzerland, Turkey, and United Kingdom. Dismantling to be performed by the buyer. --- Credpfxowqg Iie Ahuoi No packaging; all warranty rights are excluded. Should you wish to dismantle the system yourselves, please indicate this in your offer. We do not guarantee the accuracy of technical data, completeness of accessories and tools, or compliance with all safety and environmental regulations as per accident prevention guidelines.

Condition: good (used), Year of construction: 2002, operating hours: 1,008 h, functionality: fully functional, type of input current: three-phase, total height: 4,310 mm, total width: 2,372 mm, total length: 2,565 mm, input voltage: 400 V, power: 20 kW (27.19 HP), overall weight: 5,000 kg, workpiece weight (max.): 2,500 kg, operating pressure: 7 bar, inner dimension height: 1,000 mm, inner dimension length: 1,500 mm, turntable diameter: 1,500 mm, Equipment: documentation/manual, We sell a hanging - table jet blaster. The jet has a table load capacity of 2.5t. Possibility of using as a hanging jet blaster, maximum hook load capacity of 300kg. The jet blaster has a filter in it and the extraction works as a compact. Everything is inside the machine. It does not have external extraction. It is possible to try it, it is under voltage. Everything can be obtained and is still being produced. The total power of the engines is Turbine 2 x 7.5kw. Abrasive transport and extraction approx. 6kw. Total approx. 20kw. I will recommend the manufacturer with spare parts. Blade set: €245.00/set Blade spring: €1.15/pc Top plate: €82.50/pc End plate: €82.50/pc Impeller: €86.00/pc Impeller casing: €93.70/pc SAF35 carrier: €95.00/pc Throwing wheel: €718.00/pc Metal unit housing €768.00/pc Csdpfeu Nk H Sjx Ahusri Metal unit housing lid €32.40/pc Otherwise the machine is functional, very little used. I will pack some blades as spare parts.

Condition: new, Surface Shields SC300XL 200 pcs Shoe Covers. Please check out our other listings as well. Crjdevxvlzopfx Ahusi

Condition: as good as new (ex-display), functionality: fully functional, Table size 540 x 250 mm Max table travel 560 x 260 mm Max distance from table to spindle center 450 mm Table slide-way Double-V rail Feed of cross handwheel, per revolution 5 mm Feed of cross handwheel, pe graduation 0,02 mm Feed of vertical handwheel per revolution 1,25 mm Feed of vertical handwheel per graduation 0,01 mm Wheel speed (50 Hz) 2850 rpm Wheel speed (60 Hz) 3440 rpm Wheel size 200x31,75x20 mm Power of spindle motor 1500 W Hydraulic station motor 1500 W Working pressure 3 Mpa Csdpfx Ahsu Hzg Rouori Max runoff 18 L/min Fuel tank capacity 80 L Coolant pump 40 W Machine's net weight 900 kg Size 1,80x1,40x1,80 m Robust and reliable construction. Zero working hours Price should remain the same till end of December.

Condition: repair required (used), Year of construction: 2000, functionality: not functional, machine/vehicle number: 49299, rotary table diameter: 600 mm, grinding height: 400 mm, workpiece weight (max.): 300 kg, grinding diameter: 500 mm, workpiece diameter (max.): 500 mm, TECHNICAL DETAILS Workpiece diameter: 500 mm Workpiece weight: 300 kg Workpiece height: 400 mm Grinding diameter: 500 mm Grinding height: 400 mm Table load capacity: 300 kg Magnetic rotary table diameter: 600 mm Rotary table speed: 20–80 rpm Y-axis Max. feed rate: 300 mm/min Incremental position measurement system, rotary encoder, resolution: 0.001 mm Z-axis Max. automatic cross travel: 330 mm Cross feed: 4–1,500 mm/min, adjustable Incremental position measurement system, rotary encoder, resolution: 0.001 mm Credpfxexr U T Te Ahuji Grinding spindle taper: 60 mm Grinding wheel: 400 x 100 x 127 mm MACHINE DETAILS Total power requirement: 18 kW Grinding spindle drive: 10 kW Space requirement approx.: 2,500 x 2,700 x 2,800 mm Control cabinet dimensions (L x H x D): 1,600 x 2,200 x 500 mm EQUIPMENT Coolant system with paper band filter NK grinding program Electronic handwheel switchable for B-Y-Z axis Machine enclosure with manually operated sliding door for loading and unloading Note: The frequency converter for the grinding spindle is defective. An offer from ELB is available (costs € 3,712.50 + packaging and shipping).

Condition: ready for operation (used), Year of construction: 2004, operating hours: 2,184 h, functionality: fully functional, machine/vehicle number: 2407-463, spindle speed (max.): 60,000 rpm, number of spindles: 3, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 15 °, TECHNICAL DETAILS Grinding spindle speeds Spindle 1: 60,000 rpm Spindle 2: 60,000 rpm Spindle 3: 45,000 rpm B-axis swivel range: -90°/+15° Crjdextdfbspfx Ahuei MACHINE DETAILS Spindle hours Spindle 1: 11,278 h Spindle 2: 2,184 h Spindle 3: 2,841 h Main counter: 45,144 h EQUIPMENT Touch probe (on 4th spindle position)

Condition: ready for operation (used), additional equipment features: yes, Besturing: Siemens Sinumerik 840 (achteraf ingebouwd) Siemens-aandrijving: 6SN1145-1BA00-OCAO Worklength with magnetic table: 1270 mm Longitudinal travel X-axis (autom.): 610 mm Cross-travel Y-axis (autom.): 1310 mm Travel Z-axis (autom.): 565 mm Dimensions of the table: 1215 x 1250 mm Dimensions magnetic table: 1250 x 500 mm Distance between table -- spindlecentre: 680 mm Spindlespeeds: rpm Cjdpfexuwxwex Ahusri Motorpower: 15 kW Cooling system: yes

Condition: used, functionality: fully functional, Opportunity to acquire a good condition 1400 J&S surface grinder. Codpowtfngofx Ahusri Machine has been purchased from a liquidated company previously. Current pricing on these is between £5,000 - £8,000 +VAT in perfect condition. *Important Note* - This machine looks like it has been wired up to a secondary electrical panel, which is not included in this sale. Viewing recommended so the buyer can see the wiring arrangement. Sold as seen, viewing available on request.

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection -Belt conveyor: Vacuum surface for suctioning the material to be conveyed -Belt width: 100 mm Codpfjxu El Sjx Ahujri -Conveyor length: 650 mm -Drive shaft: Ø 30 x 100 mm -Dimensions: 650/520/H250 mm -Weight: 51 kg

Condition: used, Year of construction: 1999, Price: On request Crjdpfxswnhyhe Ahusi - Year: 1999 - Documentation available: Yes - CE marking present: Yes - Travel Z: 360mm - Travel X: 900mm - Center height: 950mm - Grinding diameter: 400mm - Travel Y: 550mm - Table length: 790mm - Max. spindle speed: 3400rpm - Table width: 380mm Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, rotary table diameter: 800 mm, overall weight: 6,500 kg, grinding wheel diameter: 400 mm, workpiece diameter (max.): 1,000 mm, grinding wheel width: 80 mm, TECHNICAL DETAILS Workpiece diameter: 1,000 mm Rotary table diameter: 800 mm Max. distance from rotary table to grinding spindle center: 850 mm Grinding wheel diameter: 400 mm Grinding wheel width: 80 mm MACHINE DETAILS Credpexr U R Eefx Ahuji Total power requirement: 25 kW Grinding spindle motor: 11 kW Dimensions & Weight Space requirement (L x W x H): approx. 4,100 x 3,200 x 2,600 mm Machine weight: approx. 6,500 kg EQUIPMENT Coolant system 500 liters with paper band filter 4 grinding wheels (3 unused)

Condition: used, Year of construction: 1993, table-size 1500 x 550 mm grinding range 1250 x 500 mm workpiece height 500 mm grinding length 1250 mm grinding width 550 mm voltage 400 V weight of the machine ca. 10 t Cjdpfx Ajxukn Ejhujri Machine has cooling arrangement, dressing arrangement and auto. vert. feed.

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection -Belt conveyor: Vacuum surface for suctioning the material to be conveyed -Feed belts: 3 pieces, length 1840 x 30 mm -Drive shaft: Ø 30 x 100 mm -Individual components: see photos Crsdpfx Ahexu Ehyeuoi -Dimensions: 1840/570/H285 mm -Weight: 129 kg

Condition: used, total width: 800 mm, total length: 4,000 mm, total height: 1,500 mm, Empty weight: 5.000 kg - Documentation available: No - Model: kslijper - Travel X: 2500mm - Table length: 2500mm - Magnet size: 2500mm - Table width: 60mm - Transport dimensions: 4000mm x 800mm x 1500mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Crsdpew A I Inefx Ahusi Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1989, table-size 1800 x 900 mm grinding range 1500 x 900 mm workpiece height 690 mm grinding length 1500 mm grinding width 900 mm table speeds 4 - 36 längs m/min table speeds 1 - 60 quer m/min grinding wheel size 500 x 100 x 203 mm grinding spindle speed 1000 U/min voltage 400 V total power requirement 80 kW grinding spindle drive 28 kW weight of the machine ca. 17 t Machine was complete refurbished and modernized in 2009/23. X-axe and drive were refurbished in 2023 and the machine got new magnetic chucks. Machine has cooling arrangement, dressing arrangement and auto. vert. feed. Machine has mechanical table drive and a Siemens Control. Cjdpfxsxukqao Ahueri

Condition: used, Year of construction: 2004, total height: 2,000 mm, total length: 1,700 mm, total width: 1,500 mm, Empty weight: 900 kg Price: On request - Year: 2004 - Documentation available: No - CE marking present: Yes - Serial number: C30029 - Travel Z: 450mm - Digital: Yes - Model: kslijper - Travel X: 472mm - Center height: 450mm - Travel Y: 205mm - Table length: 465mm - Max. spindle speed: 2900rpm Credpfowmf Awjx Ahuji - Type digital: Fagor 2A - Magnet size: 400mm - Table width: 200mm - Transport dimensions: 1700mm x 1500mm x 2000mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1955, grinding length 1000 mm grinding width 400 mm workpiece height 400 mm total power requirement 11 kW weight of the machine ca. 5 t Csdpfxsxuknxo Ahusri dimensions of the machine ca. 4 x 2,5 x 2,5 m

Condition: used, total height: 2,100 mm, total length: 3,000 mm, total width: 1,700 mm, Empty weight: 3.500 kg - Documentation available: No - Serial number: 172600981 - Motor power: 5.0kW - Travel Z: 400mm - Digital: Yes - Model: kslijper - Travel X: 600mm - Grinding diameter: 300mm - Travel Y: 350mm - Table length: 610mm - Max. spindle speed: 3600rpm - Type digital: Elesta - Magnet size: 610mm - Table width: 310mm - Min. spindle speed: 1500rpm - Transport dimensions: 3000mm x 1700mm x 2100mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Cjdpfxswxc Rcj Ahujri Lukas van Rossum

Condition: used, total height: 1,700 mm, total length: 2,300 mm, total width: 1,500 mm, Empty weight: 2.000 kg - Documentation available: No - Serial number: OF50-158 - Control: Conventional - Motor power: 2.0kW - Travel Z: 400mm - Digital: Yes - Model: kslijper - Travel X: 500mm - Travel Y: 200mm - Table length: 720mm - Max. spindle speed: 4000rpm - Type digital: VisoData - Magnet size: 400mm - Table width: 200mm - Min. spindle speed: 1000rpm - Transport dimensions: 2300mm x 1500mm x 1700mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Credpfx Aswningshusi

Condition: used, total height: 2,000 mm, total length: 1,900 mm, total width: 1,700 mm, Empty weight: 1.500 kg Price: On request - Documentation available: No - Serial number: 12389 - Control: Conventional - Travel Z: 400mm - Model: kslijper - Travel X: 670mm - Grinding diameter: 240mm - Travel Y: 250mm - Table length: 800mm - Magnet size: 630mm - Table width: 200mm - Transport dimensions: 1900mm x 1700mm x 2000mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Credpewh Npkefx Ahuji

Condition: used, Year of construction: 1986, total height: 1,900 mm, total length: 2,300 mm, total width: 2,200 mm, Empty weight: 2.000 kg - Year: 1986 Crodew E If Eopfx Ahuji - Documentation available: No - Serial number: 86721 - Motor power: 1.5kW - Travel Z: 400mm - Model: kslijper - Travel X: 700mm - Grinding diameter: 250mm - Travel Y: 400mm - Table length: 900mm - Magnet size: 350mm - Table width: 350mm - Transport dimensions: 2300mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,700 mm, total width: 2,000 mm, total length: 4,500 mm, Empty weight: 12.000 kg - Documentation available: No - Digital: Yes Crsdpfx Ahjw A Ngleuei - Table length: 1000mm - Type digital: Newall 2-A - Magnet size: 1000mm - Transport dimensions: 4500mm x 2000mm x 2700mm (l x w x h) - Transport weight [kg]: 12000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum