Tightening nut balancer for 36 mm threads
Buyoww8b
Balancing machine shaft
Cbtxnkzf
Balancing machine shaft
Bqirxwzpvi
Balance machine tightening nut 40 mm yellow
Mvtk7c
CEMP brand balancer, purchased in 2018, never used.
.
Year 2018
TYPE: ZB30000 G/GV
Cpuicrqaq
Prices, photos, technical info on request
workpiece length 2.000 mm
Bjwyj8kycx
weight of the machine ca. 4 t
circulation diameter max. 1.500 mm
Serial no .: A4141.01-03422, inventory no .: 20-1100111-0, integr. into the automation, control Hofmann, with extraction ringler and cooling unit.
Dimensions (HxWxD): 2.66 x 2.80 x 2.60 (m), number of parts: 3 pieces.
Machine characteristics:
Workpiece: gear 2, rotor weight with symmetrical load: 652, 5 g,
Clamping diameter: 19.5 g6 mm, measuring speed: 850 min, pneumatic connection: 5 bar.
Electrical equipment:
Connected load: kVA, mains frequency: 50 Hz.
Metrological equipment:
Measuring elect...
3
500 €
Starting bid not including VAT
Another 6 days
Another 6 days
Note: The award requires the consent
Bzvw27b
workpiece weight 0,3 - 30 kg
workpiece length 800 mm
diameter 400 mm
balancing speed variable 100 - 3000 U/min
dia. axle journal 7 - 40 mm
voltage V
total power requirement 2,0 kW
weight of the machine ca. 1,45 t
dimensions of the machine ca. 2,65 x 1,10 x 1,60 m
Balancing unit 1,50 x 0,80 x 1,30 m
Control 0,60 x 0,65 x 1,80 m
- Serial-no.: R 03/11
Protection class IP 20
Dpjkxaf
Max. Display sensitivity: 0.2 gmm
belt drive 100 - 3300 rpm.
Workpiece: max dia 200 x 200 mm, max. 4 kg, Flange dia 250 mm, Poswer 400 V 50 Hz / 12 kVA, LxWxH, ca. 4,1x4,2x2,5m, Weight, ca. 4,5 t, Description:
Balancing machine for rotors - Turbocharger fuselage groups
Bfs3d9uswe
- hydraulic measuring station
- Compensation station
- Pulsation measuring table
- Chip extraction
- Measuring instrument CAB 950T
- feeding device
- Schenck/Lauer Control on Dase of Windows This Machine is located in a Warehouse in Monheim Germany and is offered disma...
Bickenbach, Germany
(dealership location)
1998
excellent (used)
see type plate
Hsoocmv
Balancing machine, Manufacturer Schenck, Type HS20 / MAK18DV, Year of construction 2013, Base frame, Clamping device, Drilling unit, Linear motion control, Schenck control type CAB920, Control cabinet, Safety housing, Mobile suction unit Ringler type RI131, Accessories
Beypayncko
Width of rollers: 11 mm
Max. Load: per bearing 75 kg
Rotor weight: 1 – 100 kg
Support diameter: for belt "TCN" 30 – 300 mm
Bkhvzauolt
For belt "TCI" 50 – 320 mm
Max. Drive power: for GV machines 1.1 kW
Max. weight of workpiece 100 kg
Max. diameter of workpiece 800 mm
Max. workpiece height 450 mm
Main motor power 4 kW
The machine is in good technical condition, under power, after agreement it is possible to test it. Upgrade to VM3/2.
Bmeuia8wuj
Contact me for price and more information.
spindle 3.200 rpm, control CAB 750, weight, ca. 1 to (2712) S/N: EBS 0108
Cupwod2
Verfügbar ab April 2021!
Available from April 2021!
Balancing machine
Capacity: 30 kg
Biqqul9vmy
Max rotor diameter: 600 mm
Balancing speed: 900 rpm
Power: 1.5 kW
Workpiece mass: 3000(4000)kg, workpiece diamter: 1500mm, clamping length: 3500mm, drive power: 34kW, force measuring version.
Dshubwp
CMT Cheese Cooling and Stretching Line Included Moulding Accessories. 1400 kg/H
Iz0b0lvds
Condition: Excellent/ Boiler Tanks/ Accessories.
Duberring machine for small tubes
Dwmd3kzw0
Ingersoll Hansen Center 300 EDM CNC Erodiermaschine
Hersteller [manufacturer]: Ingersoll Hansen
Typ [ type]: Center 300
Steuerung [control unit]: MultiPulse Control
Bgwdgynkma
Baujahr[construction year]: 1997
+ Inkl. Handheld
+ Inkl. EROWA Preset Comfort 3D-22 / Robot X system EDM dynamic tooling system (optional)
+ Inkl. EROWA 3-D Koordinatenmesssysem (optional)
Vollständige Dokumentation ist vorhanden.
Besichtigung unter Strom kann kurzfristig erfolgen.
Für weitere Fragen stehen wir Ihne...
15X DRILL MACHINE Atlas Copco Ingersoll Rand Furukawa Sandvik Tamrock Stocknr.: BN1210 ALSO 10X DRILLING INSTALLATION WATER DRILLS AND 5X ANCHORING MACHINE 15X DRILL MACHINE Atlas Copco Ingersoll Rand Furukawa Sandvik Tamrock Stocknr: BN1210 ALSO 10X DRILLING INSTALLATION WATER DRILLS AND 5X ANCHORING MACHINE
Bqzhpeccyf
Length of the cut - 3000 mm
Zthyl0f7
Width of the cut - 1900 mm and 2950 mm
Fence 750 mm
Auto cut set for cutting backward and forward
One sided blade
Double sided blade
Cut thickness 1mm - 850mm
Speed control for rotation of blade
Variable speed control for cutting the length
Blade Size: 9745.20.0.5.18TPI
Modular drilling and milling machine GOMAD Automatic Drilling Machine AWL 2G-6B-2C
Automatic drilling machine AWL 2G-6B-2C
Automatic Drilling Machine, Modular Drilling Machine GOMAD AWL 2G-6B-2C
Type / Model: AWL 2G-6B-2C
Production Year: 2008
Bp7790l3bi
Technical condition: Good
Technical description:
The AWL-2G-6B-2C drilling machine is designed to make holes for pegs and handles in wooden strips, chipboards or wood-like material. It has 2 upper, 6 side and 2 front units, a material feeder an...
OMRON CPM1A control, 4 stations.
Target machine for assembling and compressing door glass modules.
Gc9xq2pzc
Price is a net target price, a matter of final price agreement
Purchase, acquisition, asset management of industrial equipment and machinery.
Wide range of used machinery, industrial equipment
Automatic Band Saw Swaging and Shaping Machine
Bq2fek2elc
Machine for peeling onions
Technical parameters:
- manufacturer: GOLDEN MACHINE
- machine type: 2-row
- capacity: approx. 0.4 - 0.6 tons / h
- year of production: 2018
Condition: used, operational
Bkvxbvftpd
Machine location: 33-340 Stary Sącz, Poland
Drum sieve Brand: The Screen Machine Type: Achiever Year of construction 2012 Engine: 4 cylinder Cummins Turbo Hours on display: 966 Stocknr.: BN1284 Trailed version ABS Air braked Leaf sprung 3 meter dump bunker with fingers Addition bunker Removable discharge conveyor approximately 9 meters long Drum 3 meter drum meshes 65x65 Diameter drum 153 Tires 435-50-16.5 90% Drum sieve Brand: The Screen Machine Type: Achiever Year of construction 2012 Engine: 4 cylinder Cummins Turbo Hours on display: 9...
Bed size 880 x 630 mm
Outer edge seal 950 x 700
Inside edge seal 880 x 630
Double heater
6 heat settings for the top heater
1 setting for the bottom heater
Vacuum pump included
Vacuum tanks included
Ojdgl
Top air ramp for blowing domes
MILLING MACHINE FOR ALUMINIUM pillars RINALDI LILIPUT 9M FS
Lnsin
3-head riveting machine for files
Perfect condition, practically unused.
Production Germany.
Operation via the control panel, cycle counter.
Opxw9
The machine is used for crimping all kinds of ring mechanisms, clips, etc.
Three riveting heads, with adjustable spacing and the possibility of activating each head separately from the control panel.
Cardboard thickness 0.5-4mm
Spacing of heads: 45-365mm
Weight 500 kg
380V power supply
Automatic Planing Knife Grinding Machine 85cm
Vtysc3
Main axis diameter 110 mm
Cone ISO Nº50
Main axis axia stroke 800 mm
Maximum height of the center main axis above table 1800 mm
Minimum height of the center main axis above table 0 mm
Booim72koh
Maximum boring diameter 600mm
21main shaft speeds (motor a 1440 rpm) 7 a 1000 rpm
Table Cross travel 2000mm
Longitudinal travel of the table with steady 2000mm
Longitudinal travel of the table without steady 2400 mm
Useful Surface of the rotary table 1260x1530 mm
Max. distance between main axis and s...
Manual or NC downfeed control
Working area X/Y/Z 300/600/500 mm, grinding wheel Ø 355 mm,
G0szoun
motor 3,7 KW, speed 1750 rpm., dimension 3100x1900x2200 mm,
weight ca. 2200 kg, digital read out, compl. hausing, 4 wheel flanges,
instruction manual, Installation pads; run only with oil.
with magnetic chuck + coolant system
Max. cutting force 30 tonnes
Cutting head 400 x 500 mm
Bed size 2300 x 510 mm
Stroke length (adjustable) 10 - 120 mm
Belt width 1800 mm
Operating height 990 mm
Pump motor capacity 1.1 kW 1.5HP
Approx.weight 3560 Kg
Bnlwiwyfgv
Traverse and feed drives closed loop, D.C. servo motors
Feed System “Ping and grab” clamp feed - two fixed,
one travelling clamp
Nylon belt cutting and feeding system
Intermediate cutting board and boar...
ITALPACK packing machine with its accessories
MASPACK/TOSA end line wrapping system with its accessories.
Puwpvy
The machine is as good as new as it worked for only 3 months.
Automatic single head saw METEOR I 600 (400V power supply)
disc Ø 600 mm, cooling system + conveyor K-3000 right in standard
APPLICATION:
Mvnuv0
For cutting aluminium, plastics and wood profiles
FUNCTIONS:
- Hydropneumatic cutting
- Safe cuts with automatic safety cover
- 0°, 15°, 22.5°, 30°, 45°, 67.5° right and left fixed angles
- Can be cut in any intermediate angle between
- 67.5 ° to + 67.5 °
- Speed control
- Horizontal (2pcs) and vertical (2pcs) pneumatic clamps
STANDARD EQUIPMENT:
- S...
Heavy Duty Band Saw Grinding Machine
Bq2fbvarwz
DMG Vertical Machine Center
DMC 835V
Year 2008
Travel X835 Y510 Z 510mm
Spindle 10,000rpm
ATC 20 magazine
Heidenhain iTNC-530 3D DMG ERGOLine – Control
Bt40 Spindle Taper
Coolant – Air Blast Changeover by M-Code
Spray Gun for swarf Removal
Bexr77si
Electronic Hand-wheel
Active Chiller for Spindle
Roller mill W12-25x3000, 4 - roller, with NC control - reading on all axes, desktop control, colour touch screen; year of manufacture 2015, power 45kW, weight -22 tons
Hbub7zxc
bent plate thickness 25mm
width of bent plate 3000mm
the machine has worked very little and has not been used for 2 years
Europa VS660 Gap Bed Centre Lathe with 660mm swing x 1500mm between centres. Equipped with Fagor 2 Axis DRO, 3 jaw chuck. Quick change toolpost and toolholders. Large capacity, heavy duty lathe
Pui0yq
Specification
Europa VS660
Centre height 330mm
Distance between centres 1500mm
Swing over bed 660mm
Swing over cross slide 430mm
Spindle bore (max. bar dia) 104mm
Spindle nose mounting D1-11 Camlock
Taper in spindle bore No. 7 Morse
Swing in gap 860mm
Width of bedways 480mm
Total travel of cross sl...
Single head saw for steel, metal, (blade Ø 315x2.5x32 mm)
APPLICATION:
For cutting metal profiles
FUNCTIONS:
- Robust spring system, safe cutting
- Cuts to any angle between 45° and 90°
- Hand clamps
- Possibility to prevent the blade from heating up and remove swarf by cutting with coolant
The price given is the net price.
12-month warranty
EXW. Obodovo, Sośno, Poland
The price offer presented is for informational purposes and does not constitute a commercial offer within the meaning of Article...
Automatic Band Saw Teeth Setting Machine
I9faf8t
FERMAT machine tool, s.r.o., Prague / Czech Republic
Universal cylindrical grinding machines BHC 63 CNC with cast iron bed * max loop length of 6,000 mm * swing up to 1,000 mm * workpiece weights up to 5,000 kg (with Bezel)-general product description
Machine base made of cast iron
Machines are with control Siemens 840 d sl (828 D sl) or B + R delivered power Panel 900.
Remote Diagnostics free to current warranty and beyond!
CNC Schleifscheibe Abrichtung
Reference visits throughout Germany poss...
Radial drill press in good condition.
With motorized boom (Up / Down)
Bnxo2cb
Morse taper 4
Travel on the boom: 725 mm.
Travel on spindle: 270 mm.
32 - 2500 rpm.
0.06 - 0.8 mm / rpm feed rate.
Spindle diameter: Ø65 mm.
Max height between table and spindle: 995 mm.
Total dimensions: 180 x 85 cm.
Height: 248 cm. (Transport height: 228 cm)
