Used Armature Undercutting for sale (51)

Condition: like new (used), Year of construction: 2024, Technical specifications: - Motor power 2.2 kW S1 - Max. Saw blade diameter: 350 mm - Saw blade holder: 30 mm - Cutting time per stroke: 1.5 sec. - Speed ​​on the saw shaft: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction nozzle: 2x100 mm - Operating pressure: 7-8 bar - Net weight: approx. 200 kg - Required air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 100 x 125 Standard basic equipment: - Saw blade feed pneumatic drive - Automatic engine brake - Set of operating keys Iaedpsfhbuyefx Afnjn - Emergency stop push button - Speed ​​control for saw blade feed - Fixed vertical protection device - Upper safety pressure device (pneumatic protective hood) - Suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 401 Aluminyum Pvc Alttan Çıkma Kesim Makinası, functionality: fully functional, • Complies with CE standards. Ijdpfx Aoq U Tctsfnsan • Performs precise cutting at 0 - 180 degrees and intermediate angles. • Quick setting stops for 15, 22.5, 30, 45, 60, and 90 degree angles. • Table locking lever for intermediate angles. • Saw output speed regulator reduces speed when cutting aluminium, decreasing motor load. • Safety guard for secure cutting. • Diamond saw blade diameter: 450 mm, output distance: 12.5 cm. • Standard with measurement and transport conveyor (2.5 metres right and left). OPTIONAL • Cooling system and Hydro check system available for aluminium cutting. • Capability to work with a digital meter.

Condition: good (used), Year of construction: 1995, functionality: fully functional, saw blade diameter: 400 mm, max blade diameter 400 mm cutting height adjustment angle adjustment 0″- 45″ spindle diameter 30 mm blade guard max. cutting width with guide bar 1270 mm 2 types of rotation speed 3000 / 4500rpm table top dimensions 1020 x 1120 mm worktop extension worktop extension Iodpfx Ajqwduxofnjan undercutter max diameter of undercutting saw blade 130 mm diameter of undercutter spindle 20 mm undercutter motor 0,75 kW motor 4 kW overall dimensions L/W/H 2930 x 2600 x 1450 mm weight 711 kg

Condition: ready for operation (used), functionality: fully functional, Undercutter 145x12x40 HW Application: processing of solid wood, both hard and soft Compatible with four-side planers designed for edge shaping Specifications: total height L - 12 mm external diameter D - 145 mm bore diameter d - 40 mm cutting blades - Z2 maximum rotation speed n.max - 9,200 rpm condition - used body material - steel Additional information: the photos shown illustrate the actual condition of the object of sale Iodpfxst A Ny As Afnsan the price given in the auction is a gross price

Condition: ready for operation (used), Year of construction: 1990, MARKON Log house drilling machine with undercutter year 1990 manufacture Markon Lathi / Finland Length = 3550mm Width= 1500mm Iaodpsfw Rt Rsfx Afnsn Height= 2910mm Engine power Drilling unit: 6 x 3 kW moulder: 1 x 5.5 kW Dimensions of the log to be pushed Height max 250mm Height min 130mm Width max 250mm Width min 60mm Length min 600mm Tool sizes and speeds Drill max diameter 40 mm Moulder max diameter 250 mm Drill length 325 mm Drill mounting arm diameter 20h7 mm Drill rotation speed 2880 rpm Moulder: rotation speed 2880 rpm AIR Suction openings dia. 160 mm 2 suction openings Drill unit suction opening diameter 90 mm Suction openings 6 pcs Air speed at the suction opening 30 m / s Air consumption 8460 m3 / h electrical connection Total power 380 V 24 kW Compressed air connection Minimum pressure 6 bar Drilling unit air demand / stroke "48 1 Total air demand ~ 2200 1 / min incl. 3,5 meter roller conveyor + 12 drillings

Condition: excellent (used), SMT Lathe 80001350   The machine is designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick & place unit between the shaft ends. - Ring seat turning + commutator facing + commutator turning. - Ring assembly - commutator side - Ring assembly - drive wheel side The machine has several production programmes to produce different parts. Each programme corresponds uniquely to one shaft type Technical data Armature shaft length from to 92.5 - 163.1 mm  Bearing journal diameter commutator side 8; 10; 12.5 mm Drive side 12; 8 mm Min. available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Ring dimensions Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm Ring seat diameter 44 - 50 mm Surface ring seat Rz 20 mm Main dimensions and weight of the machine Machine length 2870 mm Machine width 2600 mm Machine height 2530 mm Machine weight 5000 kg Iasdpfohw Emqox Afnen Electrical installation Rated current 10 A Rated voltage (AC) 400 V Rated power 7 kVA Rated frequency 50 Hz Pneumatic installation Nominal pressure 5 bar Maximum pressure 10 bar Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, Year of construction: 2022, machine/vehicle number: 83.178.489.6, This is a deep freezer from premium manufacturer Liebherr, year of manufacture 2022. The unit has been inspected in our in-house workshop and is fully functional. With a gross volume of 601 liters, it offers space for stackable 2/1 GN containers or E2 crates. The rounded stainless steel runners for GN containers make cleaning very easy. The Liebherr ProfiPremiumLine GGPv 6590-40 freezer offers various safety features, including the option to connect to an alarm system for optimal protection of valuable stored goods. The dynamic cooling system quickly brings products down to the desired temperature between -10°C and -26°C, thanks to the powerful refrigeration unit and professional-grade electronic controls, even at ambient temperatures up to +43°C. Defrosting is automatic but can also be initiated manually. Predefined cooling programs are available for easy operation, specifically designed for the storage of frozen goods and the deep-freezing of ice cream and frozen desserts. The unit has been inspected in our in-house workshop and is fully functional. You will receive an invoice with VAT shown separately. Condition: Used, tested and fully functional Technical data: • WxDxH: 700 x 830 x 2120mm (external) • WxDxH: 510 x 650 x 1550mm (internal) • Type: GGPv 6590 Index 42C /001 • Serial no.: 83.178.489.6 • Power supply: V: 230 / A: 1.0 / W: 500 / Hz: 50 • Volume: 601 liters (gross capacity) • Refrigerant: R 290 • Weight: 139 kg • Year of manufacture: 2022 Further details can be found on the photographed nameplate. Additional information: Iajdpfx Afoxz Tf Hjnsn • Height-adjustable feet: Where daily hygiene is essential, height-adjustable feet provide sufficient ground clearance and ensure easy, convenient cleaning underneath the unit. • NoFrost technology: Never defrost again – Liebherr’s NoFrost professional-grade equipment provides reliable long-term freshness. Frozen goods are cooled with circulating air and moisture is dissipated, keeping the freezer compartment completely frost-free and preventing food from becoming iced over. • Temperature alarm: The integrated temperature alarm signals if preset temperature thresholds are exceeded or undercut. This alarm is equipped with both acoustic and visual alerts, ensuring maximum safety for stored goods. • Reversible door hinges: Units are supplied with a right-hand door hinge as standard. Thanks to the option to reverse the door hinge, the unit can always be optimally positioned in the installation area and individually adapted to your needs. • SwingLine: The elegant SwingLine design with illuminated side edges makes these appliances the first choice for the highest design requirements. The elegantly curved construction makes Liebherr appliances a visual highlight in professional settings. The SwingLine doors feature an integrated recessed handle along the full height of the door, making them ergonomic, easy to open, and particularly easy to clean. Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following use: Diffusion welding machine for connecting the armature lead to the commutator of a starter armature using diffusion welding. Diffusion welding unit (also known as polymer diffusion welding unit, diffusion welding, copper soft welding unit, copper strip welding unit), consisting of a main machine and control system, PLC control, touchscreen operation. Process Description Iaodpfxsg Icfpj Afnon The workpiece carrier enters the station and is lifted. The alignment gripper picks up the armature from the workpiece carrier and aligns it according to the welding position. The loading gripper picks up the armature and places it in the welding chuck. The welding chuck moves with the armature into the welding position. The contacting unit and welding cylinder move together, and the first weld is performed. This process is repeated until the armature is completely welded. The welding chuck moves with the anchor into the transfer position, and the unloading gripper picks up the anchor and places it on the raised workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with OK anchors continue on the conveyor system; NIO anchors are sent to the removal conveyor. At a welding machine, the OK anchors are marked with a color on the end face of the commutators using a stamping station. This allows for identification during the final inspection of which welding machine produced the anchor. ... Technical Data: Diffusion Welding Machine Energy Data: Frequency: 50 Hz Rated Power: approx. 11 kW Operating Voltage: 400 V / 3P Control Voltage: 24 V Rated Current: 20 A Fuse: 35 A Water: Inlet pressure 4 bar, 15-23 °C, approx. 25 l/min Compressed Air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine Dimensions without Control Cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of Manufacture: 2016 Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 50 kg, total width: 400 mm, total length: 1,200 mm, total height: 1,800 mm, overall weight: 950 kg, Equipment: documentation/manual, The KKT Universal BA & KA balancing machine is a horizontally operating industrial balancing machine for precision balancing with belt drive and cardan shaft drive. It is suitable for balancing motor armatures of various sizes, as well as shafts, fan impellers, grinding wheels, cardan shafts, and similar rotors. We offer this machine in various versions, both as a used machine and as a new machine built to meet customer requirements. Please feel free to contact us - we will be happy to provide you with comprehensive advice and support. Iasdsf Sqiqopfx Afnsn

Condition: used, Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: Ankerwerk Nuremberg AEG, geared motor with brake -Gear: Armature movement CAM 76 N 1 i= 33 -Speed: 43 rpm -Engine: AEG type AM 80 N4 -Power: 0.75 kW / 1400 rpm -Shaft: Ø 32 x 78 mm -Dimensions: 525/240/H275 mm Ijdpfx Aorgtd Hofnoan -Weight: 50 kg

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm Iaedpfoq Ii Dlox Afnjn linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: excellent (used), DEMAG wheel drive motor 36/24 K6P for electric wire rope hoist P2000 / P1600, optionally with clutch and brake disc. Type 36/24 K6P, motor completely overhauled, in very good condition. Armature / rotor / runner, bearing end shields, clutch, and brake also available separately. Ijdpfx Aev Uai Aefnsan

Condition: refurbished (used), machine/vehicle number: L0319, Year of construction: 2014, operating hours: 15,500 h, The Fortus 900mc 3D Printer is one of the most precise and powerful FDM printers on the market. With the largest build size among all Fortus® systems, this 3D printer is designed to meet the most demanding manufacturing requirements. The build volume of the Fortus 900mc by Stratasys measures 914.4 x 609.6 x 914.4 mm, covering a wide range of 3D printing applications. The selectable layer thicknesses of 0.178mm, 0.254mm, 0.330mm, and 0.508mm allow for precise adjustments to suit your specific part requirements. For optimal operation of this Stratasys 3D printer, an additional washing station is needed. The Stratasys Fortus 900mc uses the soluble support material SR30 or a Break-Away support material, enabling the creation of intricate models, including undercuts and holes, while reducing the need for post-processing. The FDM 3D printer Fortus 900mc works seamlessly with the popular, free GrabCAD software, making it accessible even for inexperienced users to swiftly and easily fabricate their projects. Make the most of this Stratasys FDM 3D printer model with iSQUARED materials such as ABS, ABS-ESD, ABS-CF, ASA, PC-ABS, PC, ULTEM 9085, and ULTEM 1010. The cartridges for building and support materials each hold either 1510 cm³ or 3020 cm³, ensuring uninterrupted printing. This printer can be installed anywhere without the need for specific setup conditions. No special ventilation is required, as the Fortus systems do not produce harmful vapors, chemicals, or waste. Iodpfsvmph Esx Afnean Download the provided site preparation guide to understand the space and connection requirements of the Stratasys Fortus 900mc. This printer is part of the Certified Pre-Owned (CPO) program. Certified Pre-Owned 3D printers are used 3D printers that have been fully refurbished, serviced, and then verified through a 24-hour test print by our experts. If you opt for installation and training by one of our certified service technicians, you will also receive a 6-month warranty on your 3D printer. Additionally, we can provide you with all the accessories and consumables, tailored to your purchased 3D printer, from a single source. This means that you take no risks with your purchase.

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Iaedpovr Eh Eofx Afnsn Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 118210287, type of input current: three-phase, nominal power at 50% duty cycle: 80 kVA, short-circuit current: 35,000 A, input voltage: 380 V, overall weight: 480 kg, Technical Data Machine Dimensions (L x W x H): 0.73 x 1.22 x 1.57 m Machine Performance Rated Power at 50% Duty Cycle: 80 kVA Continuous Power: 56.6 kVA Maximum Short-Circuit Power: 306 kVA Maximum Welding Power: 245 kVA Machine Voltage Secondary Open-Circuit Voltage: 8.44 V Power Supply Rated Primary Voltage: 380 V Rated Frequency: 50 Hz Short-Circuit Current: 35 kA Maximum Welding Current: 28 kA Permissible Duty Cycle at Maximum Welding Current: 55% Cylinder Electrode Stroke Max. Electrode Stroke (EH): 90 mm Electrode Force: max. 60 N / min. 10 N Spot-Welding Armature Arm Spacing: max. 360 mm / min. 160 mm Electrode Arm: 60 mm upper / 70 mm lower Iedpfjyk Rn Sex Afnsan Electrode Holder: 33 mm Electrode Holder Adjustability: 110 mm upper / 170 mm lower Height Adjustment for Electrodes: 100 mm adjustable Throat Depth: 500 mm Materials / Sheet Thickness: S 235JO+N / 0.5–6 mm Stainless Steel / 0.5–4 mm Light Alloy / 0.5–3 mm

Condition: used, LDS Type: V875 Shaker System V875-440 with amplifier SPA40K Shaker for medium forces Technical data: Headexpander 850 * 850 mm Armature dimensions: 440 mm Sinusoidal force vector 35.6 kN (peak) Sine force vector 35.6 kN (effective) Shock force vector 106.75 kN (peak) Frequency range 5 to 3000 Hz Test specimen mass max.600kg Acceleration max. 1078.7 m/s² Speed max. 1.8 m/s Condition: gebraucht / used Weight: Shaker approx. 2200 kg Iodpfx Aouxcpwofnoan Blower: 181 kg Amplifier: 622 kg Scope of delivery: (See pictures) (We reserve the right to make changes and errors in the technical data!) We will be happy to answer any further questions you may have over the phone.

Condition: used, LDS Type: V875 Shaker System V875-440 LPT600C with amplifier SPA40K Shaker for medium forces Technical data: Armature dimensions: 440 mm Headexpander 850 * 850 mm Sinusoidal force vector 35.6 kN (peak) Isdsuxcugopfx Afnean Sine force vector 35.6 kN (effective) Shock force vector 106.75 kN (peak) Frequency range 5 to 3000 Hz Test specimen mass max.600 kg Acceleration max. 1078.7 m/s² Speed max. 1.8 m/s Deflection ± 25.4 mm Vibration tests: Sinusoidal Noise Shock Amplifier SPA40 Sliding table: WxHxD mm : 1400 mm x 1250 mm x 2200 mm Work surface: 600 mm * 600 mm Thickness of the top : 37 mm Weight of the top: 27.4 Max load : 500 kg Condition : gebraucht / used weight: Shaker approx. 2200 kg Blower 181 kg Amplifier: 622 kg Sliding table 4760 kg Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, IMV Type: i240 + SA3AM Power Amplifier + Fan Dimensions Power Amplifier: SA3AM.i40 W x H x D 1234 x 997 x 720 mm Vibration Exciter: i240 W x H x D 580 x 1950 x 850 mm Technical Data: Armature Mass: 20 kg Armature Diameter: 290 mm Armature Resonance: 2300 Hz Permissible Eccentric Moment: 850 N·m Frequency Range: 0-2600 Hz. Maximum Force: 24 kN (sine and random) 48 kN (shock) Maximum Acceleration: 1200 m/s² (sine) 840 m/s² (random) 2400 m/s² (shock) Maximum Displacement: 100 mm p-p. Maximum Load Capacity: 400 kg. Ambient Conditions: Temperature 0-40 °C, Humidity 0-85 %RH. Maximum Output Power: 30 kVA (SA3AM-i40) Iajdew H N U Dopfx Afnsn + Shaker Armature 290 mm Usable up to 2000 Hz Weight: 410 kg (SA3AM-i40) Total weight approx. 2800 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) For further questions, please contact us by phone.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2014, operating hours: 6,105 h, The Fortus 450mc 3D printer is a powerful and user-configurable workhorse, ideal for creating functional prototypes, manufacturing tools and production parts. The build envelope of the Fortus 450mc from Stratasys measures 406 x 355 x 406 mm and therefore covers a wide range of 3D printed parts. The selectable layer thicknesses of 0.127mm, 0.178mm, 0.254mm and 0.330mm also allow perfect adjustment options for your component. To be able to operate this Stratasys 3D printer optimally, you need a wash-out station. The Stratasys Fortus 400mc works with soluble support material SR30, or with a break-away support, to display even more models and even enable undercuts and drill holes in 3D printing, thus saving post-processing steps. The Fortus 400mc FDM 3D printer works with the popular, free GrabCAD software, which enables even inexperienced users to produce their projects quickly and easily. Use the iSQUARED materials ABS, ABS-ESD, ABS-CF, ASA, PC-ABS, PC, ULTEM 9085 and ULTEM 1010 with this Stratasys FDM 3D printer model. The cassettes for construction and support material each contain 1510 cm³ or 3020 cm³. Iaedpevmm Icjfx Afnsn This printer can be installed anywhere and does not require any special installation conditions. No special ventilation is required as the Fortus systems produce no harmful fumes, chemicals or waste. Download the site preparation guide to see the space and connection requirements of the Stratasys Fortus 450mc. This printer is part of the Certified Pre-Owned (CPO) program Certified Pre-Owned 3D printers are pre-owned 3D printers that have been refurbished and serviced by our experts and then verified by a 24-hour test print. Maintenance contracts and other services We offer optimal advice before, during and after the purchase. In addition to our services such as on-site installation and training for your team, we also offer the supply of accessories, spare parts and materials. Sign a maintenance contract with us and benefit from full planning and cost certainty, fast response times and minimized machine downtimes. This means you take no risk with your purchase.

Condition: refurbished (used), machine/vehicle number: P17307, Year of construction: 2015, operating hours: 9,018 h, Experience the ultimate in user-friendliness with the Stratasys Dimension SST 1200es 3D Printer. Whether you’re a novice or an experienced user, this printer offers a seamless and efficient 3D printing experience. Constructing parts has never been easier! Our ABS material ensures the creation of robust and virtually indestructible parts. With the Stratasys Dimension SST 1200es, you can produce high-quality, functional parts with ease. The build chamber of the Dimension SST 1200es measures 254 x 254 x 305 mm, providing ample space to accommodate a wide range of 3D printing needs. Customize your prints with selectable layer thicknesses of 0.254mm and 0.330mm, allowing for precise control and exceptional detail. For optimal operation, the Stratasys Dimension SST 1200es requires a wash station. It utilizes soluble support material SR30, enabling the creation of complex models, including undercuts and holes, while reducing the need for post-processing. Seamlessly integrate your workflow with the popular and free GrabCAD software. This user-friendly software allows even inexperienced users to quickly and effortlessly bring their 3D printing projects to life. Unlock endless possibilities with a variety of iSQUARED materials compatible with the Stratasys Dimension SST 1200es. Choose from ABS, ABS-ESD, ABS-CF, and ASA to meet the specific requirements of your applications. Each spool for building and support materials contains a generous 922 cm³, ensuring uninterrupted printing. The Stratasys Dimension SST 1200es can be installed anywhere, as it requires no special ventilation or complex setup conditions. The Dimension system is designed to be environmentally friendly, emitting no harmful fumes, chemicals, or waste. For detailed installation and connectivity requirements, refer to the provided site preparation guide. Discover the power of the Stratasys Dimension SST 1200es and revolutionize your 3D printing capabilities. Iajdpfx Afjm Tv Evjnen This printer is part of the Certified Pre-Owned (CPO) program. Certified Pre-Owned 3D printers are used 3D printers that have been fully refurbished, serviced, and then verified through a 24-hour test print by our experts. Maintenance contracts and other services We offer optimal advice before, during and after the purchase. In addition to our services such as on-site installation and training for your team, we also offer the supply of accessories, spare parts and materials. Sign a maintenance contract with us and benefit from full planning and cost security, fast response times and minimized machine downtimes. This means that you take no risks with your purchase.

Condition: used, Year of construction: 2022, LDS / Brüel & Kjær V780 Vibration Test Stand incl. HPA-K Amplifier – Vibration Test System Description: For sale is a professional electrodynamic vibration testing system from LDS / Brüel & Kjær, comprising the V780 shaker, HPA-K / 780 power amplifier, cooling fan, as well as extensive accessories and original documentation. The system is designed for precise vibration, environmental, and durability testing of components and assemblies, making it ideal for use in industry, research, development, and quality assurance. The shaker enables testing from DC to 4,000 Hz with sinusoidal or broadband excitation. Test specimens of up to 100 kg can be mounted directly on the armature. Technical Highlights - Max. Sine Force: 5,115 N - Frequency Range: DC – 4,000 Hz - Max. Test Load: 100 kg - Amplifier Output: 5 kVA - Total Power Consumption: 7.1 kVA - Power Supply: 3-phase 380–500 V - Accurate Laboratory and Industrial Configuration - Genuine LDS / Brüel & Kjær Quality Important Note: "The table shown in the photos is not included in the sale." Weight: approx. 6,700 kg Ijdpfjx Hx Nkex Afnjan Condition: used Scope of Delivery: (see pictures) - LDS V780 shaker - HPA-K / 780 power amplifier - Cooling fan - Controller / electronics - Cables, adapters, accessories (see pictures) - Original manuals & documentation (Subject to changes and errors in the technical data and specifications!) For further questions, we are happy to assist you by phone.

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 72 kW weight of the machine ca.: 18,0 t dimensions of machine: LxBxH: 2100x3400x2600 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2300 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x850x2500 mm dimensions electric cabinet: Nr.3: LxBxH: 1000x850x2100 mm dimensions electric cabinet: Nr.4: LxBxH: 1000x500x2350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Iaedpfxsu Idvwj Afnsn Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - left 3x drill & mill spindle and 2x thread cutting spindle - right 2x drill & mill spindle and 2x thread cutting spindle and 1x U-Axis such as 2x thread cutting spindle slidable, 2x drill and milling spindle from that one slideable and 1x U-axis slideable - 1. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 weight of the machine ca.: 17,0 t total power requirement: 83,0 kW dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1:LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxBxH: 650x600x1700 mm dimensions electric cabinet: Nr.4: LxB.H: 1000x500x1350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m Iasdsu Idxfspfx Afnon TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - left 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 72 kW weight of the machine ca.: 18,0 t dimensions of machine: LxBxH: 2100x3400x2600 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2300 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x850x2500 mm dimensions electric cabinet: Nr.3: LxBxH: 1000x850x2100 mm dimensions electric cabinet: Nr.4: LxBxH: 1000x500x2350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - left 3x drill & mill spindle and 2x thread cutting spindle - right 2x drill & mill spindle and 2x thread cutting spindle and 1x U-Axis such as 2x thread cutting spindle slidable, 2x drill and milling spindle from that one slideable and 1x U-axis slideable - 1. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) Ijdpeu Idv Djfx Afnean - control panel - manual switch i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 83,0 kW weight of the machine ca.: 17,0 t space requirement of the machine approx.: LxBxH: 5,0 x 6,2 x 3,8 m dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxB.H: 650x600x2300 mm dimensions electric cabinet: Nr.4: LxBxH: 1300x650x2350 mm TRANSFER MACHINE with 3 work station and 15 drill & mill spindles - for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, clock cycle of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm Ijdpju Idxrsfx Afnjan - right 4x drill-& mill spindle with 18 stages and 1x thread cutting spindle hydr. 14 up to 224 U/min, left 4x drill and mill spindle with 18 stages and 1x thread cutting spindle hydr. from 14 up to 224 U/min such as radial 3x drill -and mill spindle from that 1x U-Axis and 1x thread cutting spindle 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *