Used Bearing for sale (2,965)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Pgjdpfx Ajz D Taajc Aet Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Podjzy Ndcepfx Ac Ajgt Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: used, Spring actuated self-levelling pallet turntable, capacity 2000 kg Spring actuated turntable, which keeps palletised loads at an optimal working height, using a system of calibrated springs and shock absorbers. No power source or compressed air required. Lowers the risk of fatigue and injury. Reduces the time taken for loading and unloading pallets by over 40%. Fitted with fork pockets for easy relocation. Smooth running ball bearing turntable, which eliminates the need to walk around or stretch over the unit. Height 240mm (compressed), 710mm (extended). Turntable dia. 1100mm. Pgjdpfx Acszz Rane Ajt Weight: 160kg. CE marked.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Tank volume: 60 liters and 30 liters Motor power: 1.9 kW Podpozwmxlofx Ac Ajgt Power supply: 3 x 400 V (three-phase current). Speed: Continuous mechanical regulation (variator) in the range of approximately 53 to 288 rpm.

Condition: used, Year of construction: 2015, operating hours: 35,000 h, functionality: fully functional, machine/vehicle number: HS6434, path measurement accuracy: 620 mm, type of input current: AC, total width: 620 mm, total length: 3,820 mm, total height: 700 mm, overall weight: 300 kg, input voltage: 230 V, The Cox & Plant HS6434 is a high-performance, industrial-grade electromagnetic vibratory conveyor designed specifically for the hygienic handling of bulk solids, particulates, and fragile products. Manufactured in 2015, this unit represents the pinnacle of Cox & Plant’s specialist engineering in efficient, low-maintenance food and chemical processing technology. Utilizing a precise 6mm stroke amplitude driven by heavy-duty electromagnetic coils, the system offers instantaneous start/stop control and eliminates the mechanical wear components (like belts, bearings, and eccentric drives) common in traditional conveyors. Pgedpfszz Ax Aox Ac Aet

Year of construction: 2020, condition: good (used), Remmert LaserFLEX | Fully Automatic Loading and Unloading – Used - : Price ex location: now only €119,000 (net), previously €145,000 (net) plus dismantling, etc.! Manufacturer: Remmert Model: LaserFlex Year of manufacture: approx. 2020 Sheet format: 3015 Load capacity: 1,000 kg 220 kg/m² Maximum sheet dimensions: 3048 x 1524 mm Maximum sheet thickness: 25 mm SMART Control 4.0 Can be combined with a sheet metal storage system (storage system not included in the sale) Original price: €250,000 (net) Manufacturer description: Equipped with two automation units – a loading unit and an unloading unit – the LaserFLEX allows for the decoupling of loading and unloading processes in laser cutting systems. After cutting, a fork unit lifts the processed metal sheet from the change table, while simultaneously a new sheet is transported from the connected storage system via a vacuum unit. As soon as the sheet is positioned next to the laser machine, the system is loaded with the workpiece by the unloader. This entire process takes just one minute. With LaserFLEX, the downtime of integrated laser cutting systems is virtually eliminated, even high-speed laser processing is optimally supported. Pjdpfx Aewga E Toc Aogt Key features: • Changeover times of approx. one minute (with 3015 format) • Highly automated production processes • Separate loading and unloading operations for the laser cutting machine • Manufacturer-independent integration of laser systems • Flexible storage options with tower or large-scale storage systems • Reduced downtime of the processing machine • Connection of multiple laser systems in a chained layout • Integration into existing warehouse and production environments • Intuitive, graphical touch operation with visual status management • Modern industrial design Fast, flexible solution for the automation of laser systems Increased productivity in laser processing Fastest sheet changeover time on the market Seamless integration into existing production environments Handling of any sheet formats Effective supply and removal for multiple laser systems Intuitive, graphical touch operation with visual status management Innovative, modern industrial design Condition: Good Available: Immediately Location: 46419 Isselburg

Condition: excellent (used), -Dimensions: 691x1171x1593 mm -Serial number: AR100/MK1L -Model: AR100 Isdjwxv Tqecvyqi Aebd -Year: 2008 -Supplied with whisk Pgodpfxjwxv Tqj Ac Ajt -1 speed -Voltage: 400V -Power: 3 kW -Weight: 395 kg -Refurbished equipment: The equipment is prepared upon order, and the pick-up and return times are agreed at that moment (please request the price after refurbishment)

Condition: used, functionality: fully functional, FAG 24056-K-B Spherical Roller Bearings – Refurbished / Excellent Condition – 2 pcs available Available: 2 FAG spherical roller bearings, model 24056-K-B, disassembled from an industrial plant and in full operational efficiency. High-end components, engineered for heavy-duty applications, ideal as immediate replacement parts or to reduce downtime. Technical Specifications Brand: FAG Model: 24056-K-B Type: spherical roller bearings Tapered bore (K) High radial and axial load capacity Suitable for: Pjdpoyu Rh Tsfx Ac Aegt industrial gearboxes lifting equipment heavy machinery quarries, cement plants, steel mills snowmaking systems / industrial pumps Condition Used, but in perfect working condition Removed from operating equipment No signs of damage on raceways and rollers Excellent running smoothness Properly stored in crate Ready for reinstallation

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 621307509, controller model: Delem DAC-350, working width: 3,080 mm, sheet thickness (max.): 10 mm, overall weight: 11,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. sheet thickness: 10 mm Max. working width: 3,080 mm Cutting speed: 20 mm/min MACHINE DETAILS Control system: CNC Controller: Delem DAC-350 Drive type: Hydraulic Connected power: 30 kW Dimensions & Weight Dimensions (L x W x H): 4,980 x 2,400 x 2,200 mm Weight: 11,500 kg Transport packages: 1 unit Pgodjz Ebcfopfx Ac Ajt EQUIPMENT Electric back gauge Pneumatic sheet support system Fixed finger guard with hinged protection Ball-bearing table Motorized angle adjustment Motorized shear gap adjustment Documentation

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 10 m2 workspace, 4 m2 dressing area 16 x Filter Fan Units Dimensions: Length: 6,000 mm Width: 3,000 mm Clear height: 3,600 mm (adjustable depending on ceiling and installation space) Area: 14 m² Brecon BCPS cassette system: Panel thickness: 70 mm Pgodpezgcy Defx Ac Ast Maximum wall height: 6 meters Standard panel width: 1,200 mm Aluminum frame profiles Finish: 0.6 mm coated steel or 3 mm HPL (RAL 9010) Flush-finished seams with cleanroom sealant. Ceiling Brecon BCPS system ceiling: Panel thickness: 50 mm Walkable ceiling option Load-bearing capacity up to 150 kg/m² Suitable for integration of: HEPA filter units (FFU) LED cleanroom lighting Air diffusers Utilities (data, electrical, gases) Chemically resistant ETP rubber Flat, cleanable design Optional with access control or interlock. Air handling Depending on desired classification: ISO 8 (production, assembly, packaging) ISO 7 (pharmaceutical, medical devices, precision engineering) GMP C/D possible, depending on the installation concept. Indicative bill of materials Component Specification Walls BCPS 70 mm panels Ceiling BCPS 50 mm system ceiling Doors 1–2 cleanroom doors Height 3,600 mm, adjustable in height

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: FANUC, controller model: Series 31i – Model B, total height: 2,400 mm, total width: 1,900 mm, overall weight: 2,200 kg, spindle speed (max.): 24,000 rpm, tool weight: 23,000 g, product length (max.): 2,115 mm, number of axes: 3, This 3-axis FANUC ROBODRILL α-D21LiB was manufactured in 2018. It features an impressive X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine includes a robust clamping area of 850 × 410 mm and a maximum workpiece weight of 250 kg. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL α-D21LiB vertical machining centre we have for sale. Contact us for further details. Travels and speeds • Rapid traverse (X/Y/Z): 48 m/min • Feed rate (X/Y/Z): 1–15,000 mm/min • Interference radius: 380 mm • Spindle nose to table: 350–680 mmTable • Clamping area: 850 × 410 mm • T-slots: 3 • T-slot width: 14H14 mm • T-slot spacing: 125 / 250 mm • Table height from floor: 815 mm • Max. workpiece weight: 250 kgSpindle • Spindle bearing diameter: 50 mm • Max. torque: 35 Nm (100% duty)Tool magazine • Stations: 21 • Max. tool diameter: 80 mm • Max. tool length: 200 mm • Tool clamping force: 2,200 N • Max. tool weight: 2 kg/tool • Total tool mass: 23 kgCutting capacity • Max. metal removal rate: 600 cm³ Pgedpfx Acjz E Sthe Aet • Max. drilling diameter: 20 mm • Max. tapping: M16Feed forces • X-axis: 2,700 N • Y-axis: 2,700 N • Z-axis: 5,400 NElectrical • Voltage/Frequency: 400 V / 50 Hz • Connected load: 22 kVA • Power requirement: 17.6 kWUnits available and runtimes • Unit 1 • FANUC S/N: P182ZL013 • STAMA S/N: KMM 021.1705 • Runtime: 400 h 20 min 5 sec • Unit 2 • FANUC S/N: P1827L014 • STAMA S/N: KMM 021.1704 • Runtime: 29,444 h 47 min 12 sec Additional equipment • KNOLL KF 200/950 cooling unit • Unit 1 S/N: 1347674 • Unit 2 S/N: 1347675 • KNOLL 300 K-1 chip conveyor • Unit 1 S/N: 1347673 • Unit 2 S/N: 1347676 Technical Specification Taper Size SK 30

Condition: ready for operation (used), operating hours: 11,525 h, functionality: fully functional, machine/vehicle number: 0613, travel distance X-axis: 1,500 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 610 mm, controller model: Okuma OSP7000M, spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Travel in X-axis: 1,500 mm Travel in Y-axis: 630 mm Travel in Z-axis: 610 mm Distance from spindle nose to table surface: 230–840 mm Distance from spindle center to front of column: 730 mm Main spindle Spindle speed range: 10–5,000 rpm Continuously variable speed control Spindle taper: 7/24, No. 50 Tool holder: BT50 Angle: 90° Diameter of front spindle bearing: 100 mm Work table Effective table size: 1,530 × 630 mm Table size: 1,800 × 780 mm Maximum table load capacity: 1,500 kg T-slot width: 18 mm Number of T-slots: 5 T-slot spacing: 125 mm Distance from table surface to bottom edge of machine bed: 830 mm Feeds Rapid traverse X/Y-axis: 15,000 mm/min Rapid traverse Z-axis: 13,000 mm/min Cutting feed X/Y/Z-axis: 1–10,000 mm/min Average continuous cutting feed: 1–2,000 mm/min Tool changer Number of positions in tool magazine: 20 Tools included in the machine MACHINE DETAILS Control model: Okuma OSP7000M Operating hours (as of 12.04.2026) Power-on hours: 59,180 h Operating hours: 16,510 h Machining hours: 11,525 h Dimensions & weight Machine dimensions (L × W × H): 4,570 × 4,530 × 3,265 mm Weight: 11 t EQUIPMENT Pedjztpmdopfx Ac Aogt Kitagawa NC rotary table TSR180A Handheld terminal Mac mini IH Oil skimmer Chip conveyor Tools included in the machine Machine manuals Original tolerance reports Parameter backup / Backup of machine parameters

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total width: 600 mm, total height: 750 mm, total length: 2,000 mm, conveying length: 2,000 mm, construction width: 500 mm, construction height: 750 mm, overall weight: 65 kg, Manufacturer: TAF Year of manufacture: 2025 Overall dimensions (LxWxH) in mm: 2,000 x 600 x 750 Width including side panel in mm: 600 Overall height in mm: 750 Conveyor length in mm: 2,000 Conveyor width in mm: 600 Base structure: Supports, castors (2 pieces) Base plate, material: steel segments 600 x 500 Roller spacing in mm: 100 Ball roller material: steel Pedpfxoza Dgyj Ac Aegt Ball roller diameter in mm: 15 Drive: none Net weight: 65 Condition: used / fully functional Functional test: OK

Condition: ready for operation (used), Year of construction: 1989, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 20216035, color channels: 2 kleuren met keertrommel ook 1/1, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 102 mm, paper height (max.): 360 mm, total length: 2,800 mm, total width: 1,250 mm, total height: 1,690 mm, space requirement length: 2,800 mm, space requirement width: 1,250 mm, space requirement height: 1,690 mm, counter reading (black): 11,500,000, type of input current: three-phase, input current: 16 A, input voltage: 200 V, Equipment: documentation/manual, In exceptionally good and original condition, only 11.5 million prints (!) High-quality "heavy duty" B3 (35x50cm) 2-colour offset machine for high-quality streak-free printing due to typical constructive qualities; The turning device is in excellent condition. Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour with clean and weather printing 9,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Maximum printing surface 500 x350mm Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Height of the stack in the insert 900 mm Pgsdev Nwgnspfx Ac Ast Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 4.75 kW Built-in circulation pump and water tank for damp work Dimensions L x W x H = 2800 x 1250 x 1690 mm Net weight 3,560 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220/230 VAC or via the supplied transformer 3 x 380/400/415 VAC

Condition: like new (used), Manufacturer: IBC Wälzlager Type: ARTB 200 Design: Axial-radial bearing Inner diameter: 200 mm Outer diameter: 300 mm Pjdpfx Aoyryfcec Aogt Width: 45 mm Item number: 221691 Drawing number: 90210001802 Marking: 13SS1R Partially unpacked for photography – unused item from warehouse clearance.

Year of construction: 2017, operating hours: 2,000 h, condition: ready for operation (used), travel distance X-axis: 315 mm, overall weight: 14,100 kg, total width: 2,900 mm, total height: 1,800 mm, spindle motor power: 22,500 W, product length (max.): 13,000 mm, number of axes: 2, Cylindrical grinding machine manufactured in 2017. This KRAFT TT60-40L-C2-H features a grinding diameter of 600 mm and a grinding length of 4000 mm. It has a maximum workpiece weight of 3000 kg and a grinding wheel diameter of 760 mm. If you are looking to get high-quality grinding capabilities, consider the KRAFT TT60-40L-C2-H machine we have for sale. Contact us for further details regarding this machine. Pgedpfx Asz Ep Ivoc Aet - Grinding Diameter: 600 mm- Grinding Length: 4000 mm- Center Height: 320 mm- Max. Workpiece Weight (Between Centers): 3000 kg- Max. Workpiece Weight (With Steady Rests): 6000 kg- Grinding Wheel Diameter: 760 mm- Grinding Wheel Width: 100 mm- Grinding Wheel Speed: 45 m/sec- Table Travel: 4400 mm- Table Speed (Continuously Variable): 10 - 6000 mm/min- Workpiece Drive Speed: 8 - 80 1/min- Tailstock Quill Stroke: 100 mm- Tailstock Quill Taper: 6 MK- CNC Control: Siemens 828D with grinding cycles- Guideways and Spindle Bearings: Hydrostatic- Electrical Specification: Metric execution, 400V, 50 Hz, 3 Phases- Included Equipment & Features:* Hydraulically actuated tailstock quill* CE execution* Full enclosure* Automatic coolant and lubrication system* Manual grinding wheel dresser* Grinding wheel flange* Open steady rests (2 pcs)* Magnetic and paper band filter* Telescopic cover* Live center (2 pcs)* Set of operating tools* Adjustable grinding headstock* Faceplate* Technical documentation in German

Condition: like new (used), Year of construction: 2023, operating hours: 3,884 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 8,380 mm, In the interest of a major European steelworks group, we are selling this particularly high-quality turning and milling center. Due to a restructuring, this machine will theoretically be available for delivery starting in October 2026. Further photographs and the order confirmation will be provided after review. MAZAK INTEGREX e-800H 8000U Manufacturer: Yamazaki Mazak Model: INTEGREX e-800H 8000U Machine Type: 5-Axis CNC Turning-Milling Center / Multi-Tasking Machine Previous applications mainly involved the machining of long shafts or shafts in general. Max. Workpiece Size: Ø 1,300 × 8,000 mm Working Area Max. Swing Diameter: Ø 1,300 mm Max. Machining Diameter: Ø 1,300 mm Max. Supported Workpiece Weight: 15,000 kg including clamping devices X-Axis: 1,300 mm Y-Axis: 800 mm Z-Axis: 8,380 mm W-Axis / Tailstock: 6,870 mm B-Axis: -30° to +210° = 240° Psdez E Ax Ispfx Ac Ajgt C-Axis: 360° Main Spindle Chuck Range: 24" to 50" Max. Spindle Speed: 700 rpm Spindle Nose: A2-20 Spindle Bore: Ø 275 mm Spindle Bearing Inner Diameter: Ø 355.6 mm C-Axis Resolution: 0.0001° Spindle Motor: 45 kW Milling/B-Axis Spindle Milling Spindle: Single Spindle Turret with automatic tool changer Max. Spindle Speed: 10,000 rpm (current specification) Milling Spindle Motor: 37 kW B-Axis: 240° Tool Holder: ISO / CAT No. 50 Tool Magazine: 40 tools Max. Tool Diameter: Ø 135 mm With free adjacent positions: up to Ø 260 mm Max. Tool Length: 650 mm Max. Tool Weight: 30 kg Tool Change Time Tool to Tool: approx. 1.8 s Feed Rates Rapid Traverse X: 18 m/min Rapid Traverse Y: 18 m/min Rapid Traverse Z: 18 m/min Rapid Traverse B-Axis: 30 rpm Rapid Traverse C-Axis: 12.5 rpm W-Axis: approx. 2–6 m/min Tailstock / Long Shaft Machining Tailstock Taper: Metric Center No. 100 Max. Tailstock Force: 75 kN W-Axis Travel: 6,870 mm 8000U version with two steady rests Optional long boring bar system up to approx. 1,500 mm tool length with 8000U Dimensions and Weight Footprint approximately: 16,000 × 6,000 mm Machine Height: approx. 4,650 mm Machine Weight: approx. 96,500 kg Coolant Tank: approx. 2,400 liters Electrical Connection: approx. 131.4 kVA Ø 1,300 × 8,000 mm workpiece capacity Up to 15 tons workpiece weight 5-axis simultaneous turning and milling 8,380 mm Z-axis travel 800 mm Y-axis 240° B-axis 700 rpm main spindle 10,000 rpm milling spindle 45 kW turning spindle 37 kW milling spindle 40 tools 2 steady rests Approx. 96.5 tons machine weight

Condition: used, Year of construction: 1997, total length: 4,200 mm, total width: 2,200 mm, total height: 2,000 mm, Colour: Cream Weight: 13.500 kg Cutting bench, cutting shear, Guillotine shear Type: Hydraulic Type: Conventional Manufacturer: Safan Type: HVR 430-6 Year: 1997 Max. working width: 4300mm Max. sheet thickness: 6mm Electric backgauge 1000mm + stacking-station Motor-power: 15kW Machine-dimensions: 5200x2200x2000mm Machine-weight: 13500kg - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 15.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4300 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic Pjdjzlytlopfx Ac Aogt - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Ball-bearing table - Options: Digital readout - Transport dimensions: 4200mm x 2200mm x 2000mm (l x w x h) - Transport weight [kg]: 13500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, SKF 23996 CA/W33 Spherical Roller Bearings – Used – Excellent Condition – 2 pcs Available: 2 SKF spherical roller bearings, model 23996 CA/W33, sourced from an industrial plant and fully operational. These are high-quality components, suitable for heavy-duty applications and ideal as immediate replacement parts. Technical Specifications: - Brand: SKF - Model: 23996 CA/W33 - Type: Spherical Roller Bearing - Cage: CA (solid brass) - Lubrication: W33 (lubrication groove and holes) - High radial and axial load capacity Suitable for: - Industrial gearboxes Pedpsyu Rm Aofx Ac Asgt - Hoisting/lifting systems - Steel plants and cement works - Heavy-duty machinery - Pumping and snowmaking installations Condition: - Used, but in excellent working condition - Removed from a functioning plant - Raceways and rollers in very good shape (see photos) - Protective grease applied - No significant oxidation or visible damage - Stored in original SKF crate Ready for installation or use as a strategic spare part Scope of Supply: - Complete bearings - Original SKF wooden crate - Internal protective packaging

Condition: excellent (used), Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: NSK, cylindrical roller bearing inner ring unused -Type: NNU4960 03DR -Outer diameter: 335 mm -Inner diameter: 300 mm Pgsdpfx Acjzbrlte Aot -Width: 120 mm -Quantity: 2x inner ring available Price: per piece -Dimensions: Ø 335 x 120 mm -Weight: 16.2 kg/pc.

Condition: new, a selection of 80 bearings for sale bearings 60.., 62.., 63.. NU 3.., NU 2.. and NU 22.. Podpjzhv I Dsfx Ac Ajgt see the list for details.

Condition: excellent (used), functionality: fully functional, Base plate for Esterer sash cutters type SS 71 or HD 71 with main shaft and bearings. Pjdpfx Acoth Udme Ajgt Equipped with full and idle pulleys.

Condition: good (used), Offer 35511 Technical specifications: - 8 ball bearing drawers, 90% extendable - Drawer size: approx. W 1010 x D 650 mm - Drawer heights: 2 x H 55 mm; 3 x H 80 mm; 3 x H 130 mm - No key available - Cabinet space requirement: approx. W 1120 x D 780 x H 1000 mm - Weight: approx. 80 kg Pjdpfx Ajxdi A Hec Aogt

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,020 mm, controller model: Pro 5, table load: 1,200 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,900 h, coolant supply: 40 bar, spindle nose: HSK100, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, Very well-maintained machine with a low number of operating hours. The machine was purchased and installed in 2013. IKZ 40 bar and air. Tool center point control, tilted workplane, Die & mold package, extended memory, extra zero points. Lots of accessories, pallets, cubes, vises, HSK holder, shrink holder. Ca. 125 pices. Zoller for tool measurements. Psdpfxjzw Efko Ac Asgt

Condition: excellent (used), Year of construction: 2015, Equipment: chip conveyor, documentation/manual, DMG ECOMILL 1035V machining center Year: 2015 In good condition Spindle bearing issue Podsz Ehuhspfx Ac Asgt