Used Balancing Scale for sale (3,062)

Condition: used, This listing is for an OHaus Harvard Trip 1400/1500 Scales 2-5ib Capacity Mechanical Balance The unit is in full working condition and is ready for immediate release The Harvard Trip series is a precision, mechanical two‑pan (comparative) balance. Its principal use is for comparative weighing (i.e. comparing masses, not simply reading off an absolute weight) — you place an unknown object on one pan and “poise” weights / sliding masses on the other pan until balance is achieved. Because it is mechanical, it requires no external power supply (no battery or electronics). Lredpfxsxv Aflj Abyou The Harvard Trip balances are known for durability, low maintenance, and long service life.

Condition: good (used), Sartorious Stainless platform scale / balance trolley Ljdpfx Absd Tw Ixsysru Stainless mobile platform scale with a Mariotti & Pecini homogenisor attachment

Condition: good (used), Floor weighing scale K-PZ Weigher indicator Type: KPZ 52E-9-1 Maximum weight: 300 kg Minimum weight: 2 kg, e=: 0.1 kg, T=- 300 kg Dimensions: 800 mm x 1100 mm x 100 mm Lodpfxsx Hz Dqs Abyeru Including ramp

Condition: used, This listing is for a Sartorius Tare CPA34001S Analytical Balance The unit is in full working condition and is ready for immediate release. This model offers a weighing capacity of up to ~34,000 g (34 kg) with a readability of 0.1 g. It includes an automatic internal calibration (isoCAL) function, allowing the balance to self-calibrate at set intervals to maintain accuracy. The weigh cell is described as “monolithic weigh cell technology” which gives stability, precision and durability. Large weigh pan: e.g., specification documents list a pan size of 400 × 300 mm for this model. The housing is designed to be robust and chemical-resistant for tough lab environments. Lredpfxjxrt N Hj Abyou Interface: it supports RS-232C / V24‐V28 serial interface for data logging, printing, external systems. Fast response time: average response stated < 2 s in one specification sheet. Tare function: full subtractive tare up to 100% of capacity is supported. Technical Specifications (typical) Based on the manual and spec sheet for this model: Capacity (Max): 34,000 g (34 kg) Scale interval (d): 0.1 g Linearity: ±0.2 g (typical) Repeatability (standard deviation): ≤ 0.1 g Pan size: ~400 × 300 mm Dimensions (W × D × H): ~313 × 532 × 120 mm Typical response time: ≤ 2 s Operating ambient temperature with isoCAL: 0 °C to 40 °C; without: +10 °C to +30 °C (from manual) Interface: RS-232C serial, 7-bit, various parity, 150-19200 baud. Applications & Use-Case Given its capacity (34 kg) and readability (0.1 g), this balance is suited for large-capacity analytical weighing rather than ultra-fine micro-weighing. Typical uses could include: Weighing bulk samples, large containers or vessels (e.g., large drums, tanks) where still a good accuracy of 0.1 g is required. Industrial laboratories, QA/QC, production where large items must be weighed with decent precision. Situations where the weighing pan size needs to accommodate large items (400×300 mm is relatively large). Environments where interface to computer/printer is needed for logging and traceability. Where regular internal calibration is a benefit to maintain accuracy over time without frequent manual external weight calibration.

Condition: used, This listing is for the Ohaus Harvard trip 1400/1500 series scales The unit is in full working condition and is ready for immediate use OHAUS Harvard Trip 1400/1500 Series Scales Lodexv Difepfx Abysru The OHAUS Harvard Trip 1400 and 1500 series are precision mechanical beam balances ideal for comparative and direct mass measurement. They operate on the Roberval principle, maintaining accuracy regardless of pan placement, and feature durable construction suited for education, laboratory, and industrial settings.

Condition: used, This listing is for a Sartorius Combics 3 Balance The unit is in full working condition and is ready for immediate release The Combics 3 is described as a weighing terminal / indicator rather than the weighing pan or scale itself. It is designed to connect to one or multiple load‑cells / scales and manage/control them. Housing: It uses a stainless‑steel enclosure rated IP69K, meaning it is highly resistant to dust and powerful water jets — suitable for very demanding industrial or hygienic environments (food, pharma, chemical production). Lrodpfx Aexv Abgjbysu Display & Interface: Has a back‑lit graphical LCD display for clarity in industrial conditions. Connectivity/Interfaces: Comes with standard communication ports (for example RS‑232) and various optional ones such as RS‑485, Profibus-DP, Ethernet TCP/IP, Modbus TCP, and analog/digital I/O for integration into automated systems. Multi‑scale support: Capable of managing up to three scales simultaneously. This allows e.g. combining inputs or workflows from multiple platforms. Applications: The terminal supports a number of weighing‑related functions: piece counting, recipe/formulation support (multi‑component weighing), target weight monitoring, classification, dynamic weighing (items in motion), percentage weighing, etc. Traceability & certification: Optional alibi memory (for trace logging of weighing data) is available, supporting compliance requirements (GMP, ISO, ATEX in some cases) for industrial/regulated environments.

Condition: used, This listing is for the Ohaus Scout Pro Portable balance Sp4 The unit is in full working condition and is ready for immediate release Ljdpfexv A S Ssx Abyoru The Ohaus Scout Pro SP4001 is an intuitive, durable portable electronic balance designed for a wide range of laboratory, industrial, and educational applications. This balance is easy to operate with minimal instruction and offers advanced features for precise and reliable weighing. Key Features: Simple Operation: The Scout Pro digital scales are incredibly easy to operate, featuring a high-contrast LCD display that ensures readability from any angle. Durable Design: Sealed front panel, molded spill ring, and a stainless steel platform protect the balance from spills and make it easy to keep clean. Multiple Weighing Units: Includes grams, kilograms, pounds, ounces, and a combined pound:ounce display. Switch between units with just the touch of a button. Multiple Application Modes: Enhanced Parts Counting: Allows for recalculating the average piece weight. Percentage Weighing: Ideal for comparing sample weights to a reference weight. Totalization: Allows repeated summation to the limit of the display, not just the capacity of the balance. Display Hold: Perfect for weighing large packages, only available in the Ohaus Scout Pro series. Weigh Below Hook: An integral hook allows for below-balance weighing, critical for density or specific gravity determination. USB/RS232 Connectivity: Features an easy-to-install USB or RS232 interface for quick data connection to a PC or printer, a feature unique to the Ohaus Scout Pro in this price range. Battery or AC Power: Powered by 4 AA batteries, offering up to 40 hours of operation with auto shut-off, or can be powered through the included AC power pack. Physical Lock Switch: The lock switch helps reduce operator error by locking the balance into a specific configuration. Security Bracket and Shipping Lock: Comes with an integral security bracket and a shipping lock to protect the weighing mechanism during transport. Specifications: Maximum Capacity: 4,000 g Readability: 0.1 g Pan Size: 5.6 in x 6.5 in (142 mm x 165 mm) Linearity: ±0.1 g Stabilization Time: 3 seconds Dimensions: 8.3 in x 2.1 in x 7.5 in (210 mm x 54 mm x 192 mm) Weight: 4 lb (1.8 kg) Power Supply: 4 AA batteries or AC adapter (included) Construction: ABS housing with stainless steel platform Units of Measurement: g, kg, oz, lb, lb:oz, t, dwt

Condition: good (used), Marel Stainless Steel floor weighing scale Marel weigher indicator M2200-P02 110-230 Vac, 0.24-0.12 A Dimensions scale: 900 mm x 900 mm. Lrjdpfox Il Ntjx Abysu

Condition: used, Electrodynamic balance shaft balancing machine, vertical balancing machine, balancing machine SCHENCK RoTec Type EBLY Manufacturer No. 1FLY, Year of Manufacture 2000 Workpiece/Test Specimen: Balance shafts Number of measuring planes: 2 Number of balancing planes: 2 Angle of balancing components: 145 - 215° Test specimen weight: max. 10 kg Lrodpfxowgnu Ne Abysu Indicated unbalance: 2 gmm/square Lowest value per scale value: 8 gmm/square Balancing spindle speed: 1200 rpm Scale disc with test specimen holder Ø 320 mm Test specimen diameter max. 400 mm Vibration sensor: P01 force sensor Angle position sensor: HBBC incremental encoder CAB 750 microprocessor measuring device RS232 serial interface Workpiece weight: 2.2 kg Workpiece length: 250 mm Workpiece diameter: 70 mm Power supply: 400 V, 50 Hz Rated current: 16 A - SCHENCK M341 balancing indicator Space requirement: L x W x H: 2000 x 1800 x 2000 mm Weight: 620 kg Good condition

Year of construction: 2021, condition: ready for operation (used), travel distance X-axis: 1,350 mm, travel distance Y-axis: 560 mm, overall weight: 6,100 kg, total width: 2,200 mm, total height: 2,600 mm, spindle motor power: 7,500 W, product length (max.): 4,600 mm, spindle speed (max.): 1,500 rpm, table length: 1,200 mm, table load: 1,880 kg, table width: 500 mm, number of axes: 3, This 3-axis Proth PSGC-50120AHR surface grinding machine was manufactured in 2021. It features a table size of 500 x 1,200 mm and a maximum travel of 560 x 1,350 mm. The machine has a continuous table load capacity of 1,200 kg and includes a digital readout system retrofitted in 2022. If you are looking to get high-quality grinding capabilities, consider the Proth PSGC-50120AHR machine we have for sale. Contact us for further details. - Max. Distance Spindle Center to Table: 700 mm- Table Load Capacity (Continuous): 1,200 kg- Table Load Capacity (Non-continuous): 1,880 kg- Weight of Electromagnetic Plate: 315 kg- Installation Height Table to Bottom Edge of Grinding Wheel: 522 mm- Hydraulic Longitudinal Feed: 1 - 25 m/min- Step Cross Feed: 0.1 - 15 mm/stroke- Continuous Stepless Cross Feed: 50 - 1,500 mm/min- Handwheel Rotation Cross: 5 mm/rev (Graduation: 0.02 mm)- Handwheel Rotation Vertical: 0.25 mm/rev (Graduation: 0.002 mm)- Automatic Vertical Feed: AD 1- Spindle Speed: 1,500 RPM (Infinitely variable)- Spindle Motor: 7.5 kW (400V, 4P, 15A, 50Hz)- Cross Feed Motor: 0.37 kW / 0.7 kW (220V, 6P, 2.1A, 50Hz)- Rapid Feed Motor: 0.75 kW (110V, 6P, 6.1A, 50Hz)- Hydraulic Pump Motor: 3.7 kW- Transformer Tr1: 825 VA- Transformer Tr2: 2,000 VA- Drive Power (Antriebsleistung): 400V, 3P, 34.05A, 50Hz- Coolant System: Coolant device with paper filter and magnetic separator (Capacity: 100 liters)- Mist & Dust Extraction System: Model PSGC-50120AHR, Tank Capacity: 100 l, Output: 50-60 l/min, Motor: 0.55 kW, 400V, 1.8A, 50Hz, Weight: 120 kg- Digital Readout (DRO): 2-Axis Digital Readout (SINO SDS6-2V, SN: 7201723C0032, Scale: KA-300 1µm - 670 mm) retrofitted in 05/2022- Grinding Wheel Dimensions: 400 x 50 x 127 mm / 355 x 50 x 127 mm (Included KINIK 405 x 50 x 127 mm 32A 46 J 9 V, 33 M/S)- Number of Axes: 3 Axes (X, Y, Z movements with 2-Axis DRO on Y)- Optional Equipment & Features: Parallel dresser (head mounted), Table dressers, Balancing arbor, Balancing scale, Electric handwheel, LED lighting, Alignment feet, 6x Grinding wheel flanges total, Complete hydraulic and electrical system- Travel dimensions: 4.1W x 2.7D x 2.96H m)- Optional spare grinding wheels (including ZISCHE and KINIK brands) and various wheel flanges in stock/storage rack Lodpfx Abo Aa Ay Uoyeru

Condition: used, Little used European Spraydry Technologies model 8 - 19 Tall Form Spray 304 stainless steel ATEX rated spray dryer system. Mass balance design capabilities approximately 246kgs feed @ 10% solids with 26kgs Powder @ 5% residual moisture + 220kg/h water evaporated based on Potato Proteins. Inlet temperature 190 deg.c. with exhaust temperature 90 deg.c. Mass flowrate of drying air rated 6,895kg/hr. System includes the following parts: (1) Airco model CHP inlet fan driven by 11kw motor. (1) Lanemark model DB07 propane burner with control panel. (1) Tall form spray dryer chamber with conical base fitted with dislodging hammers fitted to cylinder and cone. Access/inspection doors. Explosion suppression bottles. (1) Stainless steel feed lance with pressure nozzle. (1) 304 Stainless steel product cyclone with explosion suppression bottles. Includes DMN Westinghouse type AL250DairyMZC-11 APS rotary lock value with motor. (1) Exhaust air chamber with explosion suppression bottle. (1) Gough type GBS550 stainless steel vibratory sifter/screen, mounted on stainless steel mobile frame. (1) Feed balance stainless steel vertical vessel. (1) FBF Italia model FBF2004/P High pressure plunger pump. (1) Mettler Toledo type V4-REM industrial flow-though metal detector with Piab conveying system. (1) Airco type CHP825 exhaust fan driven by 30kw motor. (1) Robbe model Atlas filling machine for bags with controls. Various small scale circulation pumps, pipework, instrumentation and ducting available. System has now been removed from installed production position and ready for loading Specifications: Material Of Construction: 304 Stainless Steel Type Of Spray: Nozzle Lrodpfxez D Efns Abysu

Condition: good (used), functionality: fully functional, Keyence VHX 700F Measurement Microscope in fully functional condition. - Base unit VHX 700F - Stand VHX-J20 - Objective lens VH-Z20R - Reference object (calibrated glass scale) - User manual Camera Scanning method: Progressive Image sensor: 1/1.8-inch, 2.11 megapixel CCD sensor Total pixels: 1688 (H) x 1248 (V) Effective pixels: 1628 (H) x 1236 (V) Usable pixels: 1600 (H) x 1200 (V) Frame rate: Selectable 15 fps and 28 fps Resolution: 2 megapixels, 1600 (H) x 1200 (V), approx. 1000 TV lines Gain: AUTO, NORMAL, PRESET Electronic shutter: AUTO, MANUAL, OFF, 1/15, 1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.2 seconds to 17 seconds adjustable in 0.1 second increments White balance: Auto, Manual, One-touch setting, Preset (2700 K, 3200 K, 5600 K, 9000 K) Back focus adjustment: Not required LCD Monitor: 17-inch color LCD (TFT)*1 Panel size: 365.76 (H) x 228.6 (W) mm*1 Pixel pitch: 0.1905 (H) x 0.1905 (W) mm*1 Number of pixels: 1920 (H) x 1200 (W) (WUXGA)*1 Display colors: Approx. 16,770,000 colors *2*1 Brightness: 270 cd/m² (typical)*1 Contrast ratio: 450:1 (typical)*1 Viewing angle: ±80° (typical, horizontal), ±70° (typical, vertical)*1 Hard Drive 500 GB (including 80 GB reserve capacity) Lrjdpfx Asw Ah Axobyeu Approx. 2.1 million images (with compression of a 2-megapixel image) or approx. 70,000 images (if 2-megapixel images are uncompressed) Image format JPEG/HD Photo (compressed), TIFF (uncompressed) Viewable image size: 1600 pixels (H) x 1200 pixels (V) Light source: Lamp 12 V, 100 W, halogen lamp Video output: Output format DVI-I, 1920 x 1200 pixels Output Scan frequency

Condition: excellent (used), Year of construction: 2022, operating hours: 5,000 h, functionality: fully functional, center height in crank: 200 mm, center height: 200 mm, workpiece weight (max.): 100 kg, grinding length: 1,000 mm, workpiece weight between centers: 100 g, workpiece diameter between centers: 400 mm, On behalf of a customer, I am offering this machine, which is in nearly mint condition. It is currently still powered up. The machine is equipped with the following options: Ljdpfow Ed D Rex Abyjru Glass linear scales in X and Z axes Electric door drive Integrated wheel change assistant Fanuc 0i TF Blue Solution HMI Back Solution Basic Black CAM Profile Security interface Remote diagnostics via mobile network (4G) Grinding head with automatic 1-degree indexing Grinding head UR 1-2-3 (prepared for HF internal grinding spindle) T1 500; T2 400 mm 3-jaw steady rest Active longitudinal positioning at the head Semi-automatic balancing GAP control A brochure for the K 10 can be provided upon request.

Condition: used, This listing is for a Magellan Instruments Tandem Pro Gas Analyser. The unit is in full working condition and is ready for immediate release. Ljdpfxexx Aqye Abyeru The Magellan Instruments Tandem Pro Gas Analyzer is a self-contained O2 & CO2 gas analyzer. The PRO system comes with an internal gas pump and programmable display. It includes calibration functions, error reporting and dual 4-20mA outputs. An RS232 output is included for integration into control systems. Benefits: Greater understanding of your cells and processes Physiological state measurement on-line Scale-up and scale-down predictions Batch variation studies: feature analysis Metabolic flux analysis and mass-balance calculations Accurate fed-batch control Batch variation studies: anomaly analysis Metabolic activity based feeding Dedicated, continuous, standard signals for all your reactors On-line information, allows real-time calculation of RQ, CER, OUR, growth rate, KLa, etc. 0-10V and 4-20mA, with RS232 on PRO & Multiplex Integrates to any reactor size (250ml – 100m3) Specifications: Feature CO2 O2 Measurement Principle: Infrared Absorption Electrochemical Range: 0-5%, 0-10%, 0-20% 0-30%, 0-50%, 0-100% Resolution: 0.01% 0.01% Accuracy: ±2% of full scale ±2% of full scale Drift:

Condition: used, This listing is for the Sartorius MSE124S Solent Scales The unit is in full working condition and is ready for immediate use The Sartorius MSE124S Solent Scale is a dependable laboratory balance designed for accurate and consistent weighing in research, education, and industrial environments. Built with precision engineering, it delivers reliable measurement performance for routine laboratory applications. Ledpfx Ajyypxpebyoru Its robust construction ensures long-term durability, while the clear digital display allows for easy reading of results. The intuitive interface makes operation straightforward, reducing user error and improving workflow efficiency. Ideal for general laboratory weighing tasks, the MSE1245 Solent Scale provides the accuracy and stability expected from Sartorius equipment, making it a practical and cost-effective solution for everyday use

Condition: new, workpiece weight (max.): 10 kg, rotor diameter: 250 mm, High-Precision Vertical Balancing Machine for Disk-Type Rotors up to 10kg The 97V10 is a versatile vertical balancing machine designed to efficiently balance disk-type rotors without their own bearing surfaces. Ideal for serial, small-scale, and single-piece production, it ensures optimal performance and reliability of your products. HIGHLIGHTS • High Accuracy: Delivers precise unbalance measurement with an accuracy of at least 4 g∙mm/kg. • Versatile Design: Accommodates a wide range of disk-type rotors, including: - Discs of various designs - Pulleys and flywheels - Fan impellers Lrsdpfx Abou U Nqdeyou - Brake discs and drums - Couplings - Pump impellers - Cutting tools • Efficient Operation: - Vertical axis of rotation for quick part replacement and easy access. - Semi-automatic mode for streamlined operation. - Protective covers and compliance with CE and ISO safety standards. • Flexible Configuration: - Customizable with drilling or milling modules for in-situ unbalance correction. - Available with various spindle fits (cylindrical or tapered) and mandrels. - Options for pneumatic or manual collet chucks and hydraulic jacks for heavy workpieces. SPECIFICATIONS Weight range of balanced rotors 0.1 - 10 kg Maximum rotor diameter 250 mm Maximum rotor height 150 mm Minimum achievable residual specific unbalance 4 g*mm/kg Number of measurable rotor correction planes 1 & 2 Rotor speed range 300 – 1500 rpm Electric motor power 1.0 kW Parameters of the supply network 380V, 3 Ph, 50Hz For more information and to discuss your specific balancing needs, please contact our sales team. We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 530 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,215 mm, overall weight: 620 kg, controller manufacturer: SIEMENS, controller model: Sinumerik ONE, number of slots in tool magazine: 40, number of axes: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information. • Main spindle (direct drive): • Max. torque: 250 Nm • Subspindle (direct drive): • Max. drive power: 29 kN (as provided) • Max. torque: 250 Nm • Speed range: 0–5000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Kinematics and axes: • Cross slide at the top with turning/milling spindle as motor spindle; hydraulic clamping during turning • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tooling: • 40-position tool magazine, HSK-T63 • 12-position radial turret with direct drive, BMT55P tool interface • Spindles and clamping: • High-clamping cylinder with draw tube for main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing on main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based UI • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and Drawing • Residual material detection • Unblocking from external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for C-axis programming • USB interface, Network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status bar • Fluids and utilities: • 2 coolant lines at 25 bar • 2 flushing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor, and turret direct drive • Hydraulic unit Ledpfx Abox D E Hbjyoru • Machine light • 8 leveling elements • Feedback/measurement: • Glass scales: X1 (incl. air system), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1200 mm • Belt filter system, 980 liters • Dirty water pump • Control/monitoring options: • BAOD-SL electronic handwheel (portable, magnetic mount for Siemens controllers) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage control BK-MICRO • 4-axis turning / balance cutting (SINUMERIK option) • Alternative-end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specifications as provided): • Bar length: 300–1200 mm • Bar diameter: 10–104 mm • Material support surface (front view): 800 x 1250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min. edge length 6 mm; max. circumference 105 mm • Hexagonal material: SW 5 to 85 mm • Round material:

Condition: like new (used), Year of construction: 2022, functionality: fully functional, EURO-Jabelmann bagging scale, model TN 260, with bulk material hopper 1,500 × 1,500 mm – year of manufacture 2022 – like new, including accessories For sale is a practically new bagging scale, model TN 260, from EURO-Jabelmann (manufacturer in Itterbeck, Made in Germany), with an upstream bulk material hopper 1,500 × 1,500 mm, manufactured in 2022. The scale doses and fills bulk materials such as potatoes, onions, vegetables, or firewood directly from the storage hopper into bags. Condition: – Like new, hardly used – Fully functional – Inspection and test run possible by arrangement Included in the scope of delivery: – Bagging scale, model TN 260, with bulk material hopper 1,500 × 1,500 mm Lredoz Tda Rspfx Abysu – “Gantry” for hand sewing machine with roller track, roller device, and aluminum spring tensioner (load capacity 4–6 kg) – new price €825 net – 2× hand sewing machine Union Special 4000A (bag sewing machine, single-thread chain stitch, with thread chain separator, 90 W) – new price €1,425 each net New price of the scale without accessories: €18,950 net. New price of the entire package: €22,625 net. Price: €10,000 net plus VAT (11,900 € gross) for the complete package, negotiable – VAT can be shown separately. Collection & shipping: – Location: 31848 Bad Münder am Deister – Loading will be assisted – Shipping by freight forwarder possible for an extra charge

Condition: used, machine/vehicle number: H2X393V04185, Year of construction: 2019, operating hours: 14,576 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 3,615 mm Fork length: 1,350 mm MACHINE DETAILS Mast type: Duplex mast Lift type: Full free lift Drive type: LPG Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,250 x 2,441 mm Own weight: 4,665 kg UVV certificate valid until: 09/2027 Next service due in: 423 hours Lrjdpfx Abez Nxd Neysu Operating hours: 14,576 hours EQUIPMENT Former Linde full-service unit 3rd hydraulic valve 4th hydraulic valve Side shifter Hydraulic telescopic forks Integrated scale Full cabin Air conditioning Heater Windshield wiper LED work light, front LED work light, rear Safety light, front Safety light, rear Safety light, side Rear view camera Comfort seat Lumbar support Seat heating LPG gas tank Facelift model with tilt angle indicator All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 171

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment Lsdpfx Asq H Sqdobyeru per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: used, This listing is for the Sartorius MSA225S-1CE-D1 + Sartorius YDP10 Printer The unit is in full working condition and is ready for immediate use Lredjyyp Hyspfx Abysu The Sartorius Sartorius MSA225S-1CE-D1 + Sartorius YDP10 Printer combination is a dependable laboratory balance and printer set designed for accurate and consistent weighing in research, education, and industrial environments. Built with precision engineering, it delivers reliable measurement performance for routine laboratory applications. Its robust construction ensures long-term durability, while the clear digital display allows for easy reading of results. The intuitive interface makes operation straightforward, reducing user error and improving workflow efficiency. Ideal for general laboratory weighing tasks, the MSE1245 Solent Scale provides the accuracy and stability expected from Sartorius equipment, making it a practical and cost-effective solution for everyday use

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 3.802.14.2501, workpiece weight (max.): 10 kg, type of input current: AC, input frequency: 50 Hz, input voltage: 230 V, rotor diameter: 270 mm, Like-new balancing machine MPM 3.BMT200-1.S40 for fast, straightforward, yet precise balancing of rotors, grinding wheels, or tools up to 10 kg. Year of manufacture: 2014 Stand-alone operation (no PC required) Single-plane measurement (second plane can be retrofitted) Measurement speed: n = 1600/min Model: 3.BMT200-1.S40 Serial number: 3.802.14.2501 Mains voltage: ~115/230 V Frequency: 50-60 Hz Power consumption: max. 140 VA Various balancing programs for radial or axial boring, as well as determining the spreading angle for holders with weights. Ideal for grinding wheel sets, tools, and ultimately for rotors of all kinds up to 10 kg. Lredpfx Abo Adr Rkjysu Includes: Mounting adapter HSK63F / HSK50E, SK40, HSK32 Includes: Spreading mandrel adapter with sleeves for bores 30, 35, 40, 50 mm (year of manufacture 2021) Includes: Weldon holders SK40 with 12 / 16 / 20 / 25 mm Includes: Hydro-expandable chuck HSK63F/D25mm (year of manufacture 2023) Includes: Original operating manual If you have any questions or need more information, please send us a message or call us.

Condition: reconditioned (used), IRD Model B750 End Drive Balancing Machine. Capacity 34,000kg (75,000lbs). Ledpfxsz Eay Ne Abysru Maximum Balance Length 5000mm (Approx). Max Rotor Diameter 3250mm (128"). Max Journal Diameter 508mm (20"). With IRD Model 295 Balancing Instrument and Operating Manual. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79268 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2007, Available immediately from our location: CNC vertical balancing machine, TIRA Type KV 10 Year of manufacture 2007 Rotor mass 1 – 10 kg Rotor height up to 400 mm Rotor diameter up to 400 mm Max. balancing speed up to 2000 rpm Max. display sensitivity (gmm) 0.5 Lrodpe Aa Iklofx Abyju Drive power 2.2 kW Weight 1500 kg Price: EUR 2,000.00 (plus VAT, ex works)

Condition: used, This listing is for a Sartorius F1 10KG Cylindrical Calibration Weight The unit is in full working condition and is ready for immediate release. Lodpfoxv Aavjx Abyjru This is a high‑precision reference/test weight manufactured by Sartorius, made of stainless steel, with a nominal mass of 10 kg. It’s used primarily for calibrating, verifying and testing weighing instruments such as balances and scales. For example, the “Cylindrical Calibration Weight” line covers nominal masses from 1 g up to 10 000 g (10 kg) and this item falls at the top end of that range for the 10 kg value. Because it’s manufactured to a high class (F1 / OIML F1) and often comes with traceable certification, it serves as a “standard” weight for checking or adjusting high‑capacity lab or industrial balance