Used Baking Moulds for sale (2,099)

Year of construction: 1992, condition: ready for operation (used), An injection molding machine Dr. Boy is available. Clamping force: 500kN, tie-bar spacing: 305mm/305mm, platen dimensions X/Y: 500mm/500mm, max. opening stroke: 350mm, max. platen spacing: 600mm, min. mold height: 250mm, max. screw stroke: 120mm. Machine dimensions X/Y/Z: approx. 3450mm/1050mm/2000mm, weight: approx. 2050kg. The system has minor defects requiring repair. Documentation available. An on-site inspection is possible. Ncjdpfxeyw Svfs Agwep

Condition: ready for operation (used), Year of construction: 2018, operating hours: 5,600 h, functionality: unexamined, planing height: 240 mm, spindle diameter: 40 mm, planing width: 320 mm, overall weight: 9,000 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, surfacing fence height: 2,500 mm, Service by Rehomy BV (Netherlands) ----- 9 spindles: U-R-L-O-U-R-L-O-U Max. planing dimensions: 240 x 320 mm Removed from operation in working condition (machine has since been dismantled) Serial no. 18A1869 FEM9-32XC / RHINO 800XL Feeler-series 9 FEELER series A. Capacity: (1) Working width: 18–320 mm (2) Working thickness: 6–160 or 230 mm (3) Min. working length: 240 mm (4) Feed speed: 7–36 m/min B. Motors: (1) 1st bottom horizontal spindle: 10/20 HP with outboard bearing (2) 2nd right vertical spindle: 10/15 HP with outboard bearing (3) 3rd left vertical spindle: 10/20 HP with outboard bearing (4) 4th top horizontal spindle: 10/20 HP with outboard bearing (5) 5th bottom horizontal spindle: 10/20 HP with outboard bearing (6) 6th right vertical spindle: 10/15 HP with outboard bearing (7) 7th left vertical spindle: 10/15 HP with outboard bearing (8) 8th top horizontal spindle: 10/20 HP with outboard bearing (9) 9th bottom horizontal spindle: 10/20 HP with outboard bearing (10) Feed: 15 HP (inverter drive) (11) Elevation: 2 HP C. Spindles: (1) Spindle diameter: 50 mm (1st, 2nd, 3rd, 4th, 9th spindles); 40 mm (5th, 6th, 7th, 8th spindles) (2) Spindle speed: 6,200 rpm (3) Adjustment range vertical spindle: 80 mm (4) Adjustment range horizontal spindle: 35 mm D. Cutting circles: (1) 1st bottom horizontal spindle: 100–180 mm (2–9) All other spindles: 110–250 mm E. Miscellaneous: (1) Dust extraction outlet diameter: 160 mm (2) Infeed table: 2 or 2.5 m (3) Feed roller diameter: 140 mm (4) *Supplied with 50 mm cutter head F. Standard equipment: (1) Digital feed speed display DPRLF-40K (2) Automatic table lubrication system (3) Central lubrication system (point-to-point) (4) Pneumatic chip breakers on top spindles (5) Pneumatic fence on left spindles (6) CE-marked (7) Motor: IE3 efficiency Options: OP014-15 Variable feed speed controller, 15 HP inverter OP001 Pneumatic elevation for 1st and 2nd infeed rollers OP041 Outboard bearing for 2nd, 3rd, 6th, and 7th spindles OP017 Digital position controller for 3rd, 4th, 7th, and 8th spindles OP042C Enhanced soundproof enclosure OP023AE3-15 Feed drive motor, 15 HP (IE3) Ncsdpfjyguf Hex Agwsp OP023BE3-10-15 Motor for 10/15 HP spindle (star/delta, IE3) OPO08-5 Extension table 2.5 m with stand and fence OP023BE3-10-20 Motor for 10/20 HP spindle (star/delta, IE3) OP002 Three-mode feed roller pneumatic elevation OPO10-230 Extra working height, 230 mm (2nd, 3rd, 6th, 7th spindles) OPO08A Air-cushion table, 320–400 mm Spindle sequence: Bottom, right, left, top, bottom, right, left, top, bottom

Year of construction: 2019, operating hours: 17,716 h, condition: ready for operation (used), General Data Measurements width 1920 cm Measurements depth 7750 cm Machine weight 26210 kg Measurements height 2410 mm This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding Ncjdpox D Nx Iefx Agwsp

Condition: used, Year of construction: 2001, clamping force: 25 kN, displacement volume: 20 cm³, injection pressure: 2,500 bar, overall weight: 1,800 kg, load hours: 38,850 h, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) Nsdpoyt R S Aofx Agwecp delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2007, Patented tie-bar-less clamping system, screw diameter 70 mm. Fully operational. We are winding down our production. Nodjyw Hyxjpfx Agwocp

Condition: used, Year of construction: 2010, operating hours: 60,000 h, Patented tie-bar-less clamping system. Screw diameter 55 mm. We are closing down our production; we have two of these machines available, both in full working condition. Ncodpfx Aeyw Hwqjgwop

Condition: used, Year of construction: 2010, operating hours: 65,000 h, Patented tie-bar-less clamping system, fully hydraulic, with high rigidity. Screw diameter 22 mm. We are winding down our production. We have two of these machines. Both are fully operational. Ncjdpfxoyw Ht Ss Agwop

Condition: good (used), Year of construction: 2008, Ref. no.: 18643 Ncedpfxjxvy Rlj Agwep Hersteller: ARBURG Type: 470 C 1500-400 Golden Editions Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Machine weight: 4850 kg Dimensions LxWxH part 1: 4,6 x 1,6 x 2,1 m Additional information & extras Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67).

Condition: refurbished (used), operating hours: 22,000 h, In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Ncodpfel Tnz Eex Agwsp Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free with a 3 month (parts only) warranty. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we'll do the rest.

Condition: good (used), Four-side planer SCM SINTEX – very well-maintained machine from a small joinery Weight: 925 kg Nedpfx Agjyuw Rnjwjcp Dimensions (L x W x H): 340 x 100 x 160 cm 380V 4 spindles Bottom/top spindle 7.5 kW Left/right spindle 7.5 kW Max. working height 105 mm Max. working width 180 mm Infeed table 2300 mm Spindle diameter 40 mm

Year of construction: 2006, condition: ready for operation (used), Four Engel injection molding machines are available. 1) Engel ES 750/150 HL, year of manufacture: 2006, core pulls: 2, screw diameter: 55mm, shot volume: 511cm³, injection pressure: 1616bar/2052bar, nozzle stroke: 350mm, nozzle contact force: 67kN, clamping force: 1500kN, opening stroke: 606mm, ejector force: 60kN, ejector stroke: 150mm, min. mold installation height: 294mm, platen dimensions X/Y: 750mm/520mm, weight: approx. 9500kg, control system: CC100, operating hours: approx. 79000h. Including Engel HLi automation robot. 2) Engel ES 80/30 HL, year of manufacture: 1995, core pulls: 2, screw diameter: 22mm, shot volume: 38cm³, injection pressure: 1500bar/2050bar, nozzle stroke: 200mm, nozzle contact force: 28kN, clamping force: 300kN, opening stroke: 330mm, ejector force: 24kN, ejector stroke: 70mm, min. mold installation height: 110mm, platen dimensions X/Y: 550mm/380mm, weight: approx. 2500kg, control system: CC100, operating hours: approx. 113300h. 3) Engel ES 2000/250, year of manufacture: 1993, core pulls: 3, injection unit: PVC, screw diameter: 70mm, shot volume: 1154cm³, injection pressure: 1400bar/1700bar, nozzle stroke: 450mm, nozzle contact force: 150kN, clamping force: 2500kN, opening stroke: 600mm, ejector force: 70kN, ejector stroke: 200mm, min. mold installation height: 200mm, platen dimensions X/Y: 910mm/910mm, weight: approx. 16000kg, control system: CC90, operating hours: approx. 109300h. Including Wittmann W322 automation robot. 4) Engel ES 750/150 HL, year of manufacture: 1998, core pulls: 2, screw diameter: 35mm, shot volume: 135cm³, injection pressure: 1060bar/1600bar, nozzle stroke: 200mm, nozzle contact force: 28kN, clamping force: 600kN, opening stroke: 450mm, ejector force: 40kN, ejector stroke: 100mm, min. mold installation height: 150mm, platen dimensions X/Y: 600mm/560mm, weight: approx. 4700kg, control system: CC100, operating hours: approx. 108600h. Including Engel sprue picker automation robot. Documentation available. An inspection on site is possible. Nsdpfx Asyu T D Dogwocp

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Hersteller: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Ncodpfx Ajxhfuajgwsp Producer: Wittmann Type: W721-0231 Year: 2005

Condition: good (used), Year of construction: 2011, operating hours: 32,000 h, functionality: fully functional, clamping force: 280 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,065 bar, total length: 3,200 mm, total width: 1,350 mm, total height: 1,850 mm, overall weight: 2,900 kg, Equipment: documentation/manual, warehouse no.: 503562 manufacturer: ENGEL type: Victory 200-28 Tech Ncjdpsykpvbsfx Agwep controller: CC200 year of construction: 2011 clamping force: 280 kN size of mould plates h x v: 500 x 400 mm min. mould height: 150 mm max. open daylight: 550 mm opening stroke: 400 mm screw diameter: 30 mm swept volume: 99 ccm injection pressure: 1450 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor LxW: 2800mm x 350mm Discharge height: 950mm Speed: 9m/min machine incl. Handling machine incl. water flow regulator Anti vibration mounts interface for ejector plates safety interface for temperature control units Schuko-socket 10A selection unit measures of machine l x w x h: 4.4m x 1.9m x 2.1m total weight: 2900KG technical data robot-system handling type: Linear manufacture: ENGEL controller: Viper 6 year of construction: 2011 electric cabinet dimensions: 1,00m x 0,35m x 0,64m

Condition: excellent (used), Year of construction: 2012, operating hours: 49,130 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 42 mm, displacement volume: 214 cm³, injection pressure: 1,724 bar, ejector force: 20,400 N, ejector stroke: 130 mm, plate length: 610 mm, plate width: 635 mm, total length: 4,370 mm, total width: 1,210 mm, total height: 2,200 mm, overall weight: 3,730 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 725 mm, Equipment: documentation/manual, warehouse no.: 503452 manufacturer: BOY type: 90 E controller: Procan ALPHA year of construction: 2012 operation hours: 49130 h clamping force: 900 kN distance between tie-bars h x v: 430 x 360 mm size of mould plates h x v: 635 x 610 mm min. mould height: 250 mm max. open daylight: 725 mm opening stroke: 475 mm screw diameter: 42 mm swept volume: 214.7 ccm injection pressure: 1724 bar screw length: 20 l/d screw stroke: 155 mm Ncedpeyknr Iefx Agwop screw speed: 280 min screw torque: 700 N plasticising rate: 136 g/s PS number of heating zones: 4 nozzle stroke: 250 mm equipment included screen text german core pulling hydraulically 1x machine without material hopper machine without water flow regulator Anti vibration mounts interface EUROMAP 67 interface USB measures of machine l x w x h: 4.37m x 1.21m x 2.2m total weight: 3730KG

Condition: good (used), Year of construction: 2007, Ref. no.: 18588 Hersteller: BATTENFELD Type: EM 30/55 Unilog B6 Run hours: 3.200 Electric machines Year of construction: 2007 Clamping unit Clamping force: 30 ton Distance between tie bars: 300 x 300 mm Mould height min.: 150 mm Mould height max.: 330 mm Opening width: 580 mm Platen size (h x v): 450 x 450 mm Nodpsxdk Auefx Agwscp Injection unit Screw diameter: 18 mm Injection volume: 19 cm³ Shot weight: 17,5 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,5 x 1,1 x 1,9 m Machine weight: 2700 kg

Condition: good (used), Year of construction: 2011, Ref. no.: 18586 Nodpew E E Evefx Agwscp Hersteller: KRAUSS MAFFEI Type: KM180-750 AX Electric machines Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 1050 mm Distance between tie bars: 560 × 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,07 x 1,92 x 2,01 m Machine weight: 6500 kg

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Nedpfogrzh Ejx Agwecp Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: used, Stretch blow molding machine from Etek ISBM Line = Injection Stretch Blow Molding Stretch blow molding machine for single-use PET bottles from PET preform blanks Stretch blow molding machine for rotary index production Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 Volt, 50 Hz Net weight approx. 6000 kg Nedjkucxlspfx Agwocp As new condition

Condition: new, spindle moulder with tillable spindle guaranteed quality at your finger tips - easy-to-use the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine. spindle speed readout via LED's left right turning of spindle spindle moulder fence with manual adjustment machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button Nodpjcuwptsfx Agwecp carriage on work table for tenoning works incl. fence and work piece clamp incl. feeder unit STEFF 2048 4 rollers 8 speeds work table dimensions 1200 (2500) x 855 mm spindle DM 30 mm usable spindle lenght 125 mm max. tool DM under table 240 x 80 mm suction connection DM 2 x 120 mm motor 5,5 kW INcL. OPTIONS: version 'LL' with long cast iron tables (2500 mm) & pull out work piece support in front fence with hand wheel adjustment and numerical read out machine dimensions L x B x H = 2500 x 855 x 900 weight approx. 500 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2013, clamping force: 50 kN, displacement volume: 59 cm³, injection pressure: 2,500 bar, overall weight: 3,700 kg, load hours: 29,000 h, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Krauss Maffei Type: KM50-180AX Condition: aus laufender Produktion Operating hours: ca. 26.000 CLAMPING UNIT: - Clamping force: 50 t Öffnungsweg: 300 mm Mould installation height min.: 150 mm Mould installation height max.: 470 mm Tie bar distance (h x v): 410 x 360 mm Plate dimension (h x v): 510 x 460 mm Centering (fix- movingplate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Injection weight in polystyrol: 54 g Stroke volume: 59 cm³ Einspritzdruck: 2.500 bar CONTROL: MC5 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 x (Hydr. Kernzug-Aggregat) Air valves: 2 Hot runner control devices: 6 Robot interface: Euromap 67 Other equipment: Qualitätsüberwachungspacket GENERAL DATA: - Installed heating capacity: 8,1 kW Njdpfx Ageppigdewecp Pump drive power: entfällt Total installed power: Motor + Heizung Total weight: 3.700 kg Total size L x B x H: 4,4 x 1,6 x 1,9 m

Condition: used, Year of construction: 2008, clamping force: 160 kN, displacement volume: 251 cm³, injection pressure: 2,500 bar, overall weight: 8,200 kg, load hours: 37,200 h, screw conveyor diameter: 40 mm, terms of delivery: FCA Pegnitz delivery time: on request Nedpfewd Udlox Agwscp terms of payment: 100% prior to delivery

Year of construction: 2011, condition: excellent (used), Key Choc Chocolate Moulding Tempering Machine Bench Top Machine Ncsdpsnxkc Rjfx Agwsp Model MM15 Year 2011 Capacity 15kg In everyday use at present

Condition: ready for operation (used), Year of construction: 2006, operating hours: 30,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 44500 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - tiebar pull system - 3 x core pulls on movable plate Ncsdpfx Agjymn Rvewjp - 2 x core pulls on fix plate - 20 x hot runner controller - Robot interface according to Euromap 67

Condition: used, Year of construction: 2005, clamping force: 25 kN, displacement volume: 440 cm³, injection pressure: 1,550 bar, overall weight: 2,500 kg, load hours: 40,000 h, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Ncedpfsynbcnjx Agwsp

Year of construction: 2025, condition: new, functionality: fully functional, "Columbus Vacuflex" Vacuum Bag – Available Immediately! (Professional vacuum bag for a wide range of vacuum technology applications) The COLUMBUS Vacuflex is a robust and versatile vacuum bag designed for applications such as vacuum form bonding, veneering, coating, and laminating workpieces made of wood and wood-based materials. Thanks to its flexible construction, the vacuum bag is particularly suitable for workpieces that, due to their size or geometry, cannot be processed, or can only be processed to a limited extent, in conventional vacuum presses. Ncjdoyaxxkspfx Agwep The fabric-reinforced and durable material ensures a long service life, even under demanding professional use. At the same time, the vacuum bag allows for easy handling and can flexibly adapt to various workpiece shapes. With the COLUMBUS Vacuflex, even very large or complex workpieces can be efficiently produced. This makes the vacuum bag ideal as a standalone tool for smaller production environments as well as a valuable addition to existing vacuum presses, significantly broadening the scope of applications. Technical Specifications • Robust, fabric-reinforced vacuum bag • High flexibility for a wide variety of workpiece shapes • Suitable for form bonding, veneering, and laminating • Ideal for large or complex workpieces • Simple integration into existing production processes • Perfect as an accessory for vacuum presses The COLUMBUS Vacuflex is developed and manufactured directly by the OEM and is designed for long-term use. High-quality materials and meticulous workmanship ensure exceptional reliability and long service life.