Used Baking Moulds for sale (2,097)

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1700x860x850 mm Nksdpevz Hzljfx Agwjw Weight 190 kg Total power requirement 1,5 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1700x660x850 mm Weight 180 kg Total power requirement 3 kw Nodpfxjvz Hzfs Agwokw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 800x860x850 mm Weight 140 kg Nkedsvz Hy Uopfx Agwew Total power requirement 1,5 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1250x880x850 mm Weight 180 kg Nkjdpfx Agsvz E A Uowsw Total power requirement 1,5 kw

Condition: excellent (used), Year of construction: 2016, operating hours: 28,600 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 570 cm³, Clamping force 2000 kN Mould opening force, max. 101 kN Travel force movable platen opening 50 kN Travel force movable platen closing 42 kN Size of mould platens (h x v) 915 x 915 mm Distance between tie bars (h x v) 560 x 560 mm Mould opening stroke 700 mm Mould height min 550 mm Nedpfxsxz Tq No Agwokw Max. daylight 1250 mm Hydraulic ejector - stroke 200 mm Ejector force 58/28 kN Injection unit: Screw diameter 55 mm Ls/D ratio 23 Injection pressure 2387 bar Stroke volume 570 ccm Shot weight (PS) 519 gr. Injection rate 261 ccm/s Screw speed 260 1/min Plasticising rate max. 49 g/s Nozzle pressure 87 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Installed heating capacity 23 kW Adjustable barrel heating zones 6 Reservoir capacity 525 ltr. Dimensions and weights: Dimensions of the machine ca. 6,00 x 2,10 x 2,10 m Total machine weight 11500 kg Max. mould weight 2535 kg Accessories: - Anti vibration pads Additional Options: - Electrical plasticizing motor - Accumulator - 2 x Air valves - 2 x core pulls on movable plate - 1 x core pull on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Year of construction: 2018, condition: good (used), Mould turner 10Ton Year : 2018 Nksdpfx Agjw Dtp Hjwsw

Condition: ready for operation (used), Technical characteristics Panel width : 240 mm to 1200 mm Panel length : 240 mm to 3000 mm Panel thickness : 10 mm to 60 mm Band thickness : 0,3 mm to 3 mm Pin inner axis : 500 mm ENTRY / EXIT : Transfer realised with special chains covered in stainless long lasting rubber Entry pivoting guides adjustable depending on panel type Closing device on above pressor to assure the pressing of the panel against the pins Delaying device in entry for optimization of different width panel dimensions Single part rigid structural longitudinal chassis ADVANCE CHAIN : Continuous speed tuning from 10 to 40 m/min by INVERTER CN direct numerical command The stop pins are automatically adjusted in height by CN and can have : height/thickness 12- 18-23 mm from the chain level Chain pin inner axis 500 mm BELT PRESSOR SOUNDPROOF CABINS All machining groups inside the machine are surrounded by soundproof material Internal lighting CN command placed at entry of the machine, fixed chassis side NUMERICAL CONTROL Video interface Positioning axis control Chain advance speed tuning Pressor height adjusting depending on panel thickness Automatic adjustment of band changing and band charger Moulding list management Sequenced motor startup Possibility of connection to a barcode reader Module NC410 MILLING GROUP Timed pneumatical anti shard action for transversal milling Tool rotation speed : 6000 rpm Motor power : 5.8 kW Tool Ø : 200 mm DOUBLE SUPERPOSED SPLINTERS Simultaneous displacement for thickness adjustment and independent adjustment vertical and horizontal Cast iron bearing structure Tool speed rotation : 6000 rpm Motor power : 5.8 kW Tool Ø : 205 to 250 mm EXTENSION MACHINE to 3200 mm AUTOMATIC CENTRAL SUPPORT 10.5 This device allows support of parts that due to their dimensions or thickness can subdue central bending Fully automatic activation GLUING GROUP SP3 Straight bands in resin, melamine, ABS, PVC, PP EVA basis thermoplastic glue Independent Teflon covered changeable glue tank Glue level sensor inside the tank Glue input roller speed synchronized with the chain advance Breveted pre fusion device Glue granule container (8kg) Band presence detection device Automatic band changing procedure 6 POSITION MOBILE BAND CHARGERS END CUTTING End cutting unit for edge thicknesses up to 3 mm Device for quick removal in stroke Automatic exclusion of the unit when the motors are stopped Nkjdpfjtrihvsx Agwow Speed : 12000 rpm Panel projection : 35 mm Edge thickness : 0.3 to 3 mm Panel thickness : 10 to 60 mm Interval between 2 consecutive panels : 350 mm WHOLESALE TRIMMING UNIT 2 superimposed motors with horizontal axis Automatic pneumatic exclusion of the group Speed : 12000 rpm Motor power : 1.3 + 1.3 kw Panel thickness : 10 to 60 mm Tool diameter : 80 mm ANGLE TRIMMING GROUP The adjustment of the position of the tool in relation to the material is automatic with predefined dimensions on 4 pre-adjustable in-line stops The in-line stops are automatically selected by the control Use on the MULTIPROFIL tool group to change profile/shape without replacing the tool Tools are equipped with 20° chamfer and 1.5-2-3 mm radius Speed : 12000 rpm Motor power : 0.65 + 0.65 kw Panel thickness : 10 to 60 mm TOP / BOTTOM ROUNDING GROUP Rounding copier for the upper and lower stops of the panel with oscillating movement for the continuation of the panel Quick release system of the motor-holder groups Automatic exclusion of the tool with stopped motors Tool rotation speed : 12000 rpm Motor power : 0.3 kw

Condition: used, PRICE: 2000 EUR Nedpjuuip Ijfx Agwskw Bread maker for baguette bread Manufacturer: Seewer Rondo

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 202102, type of input current: three-phase, power: 5 kW (6.80 HP), input voltage: 230,400 V, Comec Moulding machine for pressing and moulding Shoe insole parts Nkodpfx Aeyizl Ssgwow

Condition: good (used), Year of construction: 2013, Ref. no.: 18494 Hersteller: ENGEL Type: Victory 50-200 Spex Year of construction: 2013 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Mould height min.: 200 mm Opening width: 600 mm Platen size (h x v): 500 X 450 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2400 bar Measurements and weight Dimensions: 3,4 x 1,3 x 1,8 m Machine weight: 2900 kg Additional information & extras Nodpfxexzq Skj Agwekw Core pull: 1 pcs

Condition: excellent (used), functionality: fully functional, Dies for rain gutter and accessory production lines We offer PVC extrusion dies for: -production of rain gutter systems, including the Royal Dual Wall Gutter and Gutter 125, -corners, elbows, and other PVC accessories, -other structural and construction elements made of PVC. Nodpfx Ageydbl Uowskw Available die types: -Royal Dual Wall Gutter die -Gutter 125 die -Other dies for accessories and gutter systems -Royal Dual Wall Gutter system Features: -Made of high-grade, wear-resistant tool steel -Precise shape forming -Adjustable die parameters to meet production requirements -Compatible with PVC granulation and extrusion lines NOTE: For detailed information about the dies and products, please contact us.

Condition: new, Year of construction: 2025, Ceetec A/S produces since 1970 wood painting machines in Norre Aaby, Denmark. According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative technology where it makes sense for our customer. This makes our machines very long living but also very cost effective for the customer. Our innovative drying systems are available in longitudinal and transversal version and can be combined with all our painting machines. We can also add IR-stripes for faster drying apart from the hot air drying (heated by hot water). You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. The machines will be configured and build according to the wishes of You. Delivery time on request. Do You have further questions? Please feel free to contact us whenever You want! Njdpfxoffc Ufs Agwjkw

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 675 mm Njdpfx Agov Stbmjwekw Max. daylight 1825 mm Hydraulic ejector - stroke 135 mm Ejector force 226 kN Injection unit: Screw diameter 70 mm Ls/D ratio 23 Injection pressure 2389 bar Stroke volume 1097 ccm Shot weight (PS) 998 gr. Injection rate 393 ccm/s Screw speed 218 1/min Plasticising rate max. 83 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 75 kW Installed heating capacity 36 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 8,70 x 2,90 x 2,80 m Total machine weight 44000 kg Accessories: - Anti vibration pads Additional options: - 1 x air valve - 8 x pneumatic sequentional valves - Accumulator - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate - Robot interface according to EUROMAP 67

Condition: ready for operation (used), Year of construction: 2006, operating hours: 77,000 h, functionality: fully functional, clamping force: 5,000 kN, screw diameter: 100 mm, Clamping force 5000 kN Mould opening force, max. 280 kN Travel force movable platen opening 137 kN Travel force movable platen closing 136 kN Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 900 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Nsdpewgni Hsfx Agwekw Max. daylight 1650 mm Hydraulic ejector - stroke 250 mm Ejector force 95/48 kN Injection unit: Screw diameter 100 mm Ls/D ratio 18 Injection pressure 1411 bar Stroke volume 2411 ccm Shot weight (PS) 2194 gr. Injection rate 801 ccm/s Screw speed 189 1/min Plasticising rate max. 161 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1075 ltr. Dimensions and weights: Dimensions of the machine ca. 7,50 x 2,50 x 2,50 m Total machine weight 27090 kg Max. mould weight 7900 kg Accessories: - Anti vibration pads - 2 x 8 fold water flow regulator Additional Options: - 2 x hydr. core pull on movable plate - 2 x hydr. core pull on fix plate - Robot interface according to Euromap 12 - 16 x hotrunner controller - 1 x air valve on movable plate

Condition: used, Year of construction: 2005, operating hours: 70,000 h, functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, Offer-Details: Stock-No. 14171 Manufacturer Engel Type of machine ES 2050 - 400 HL Year 2005 Working hours 70000 Controlversion CC200 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 4000 kN Size of mould platens (h x v) 1400 x 1080 mm Mould height min 350 mm Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Ejector force 83 kN Injection unit: Screw diameter 70 mm Injection pressure 1482 bar Stroke volume 1155 ccm Shot weight (PS) 1040 gr. Injection rate 419 ccm/s Screw speed 183 1/min Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Dimensions and weights: Dimensions of the machine ca. 8,30 x 2,35 x 2,48 m Total machine weight 31200 kg Accessories: - Anti vibration pads Nedpfx Aou Awalegwekw - 2 x 24 zones water flower - Material hopper - degassing screw Additional Options: - Robot interface - 4 x hydraulic core pulls

Condition: excellent (used), Bosch Angle Head Shrinking Tool You are buying a high quality angle head setting machine for anchor production. This machine is an own construction of Bosch Automotive and is possibly a unique piece. The field of application mainly concerns anchor production. Nsdpfx Ageg Ibyrewokw Manufacturing/production/operating documents are enclosed with the machine. Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Year of construction: 2017, operating hours: 17,481 h, functionality: fully functional, screw diameter: 50 mm, clearance between the columns: 520 mm, displacement volume: 393 cm³, injection pressure: 1,892 bar, injection weight: 375 g, mold height (min.): 300 mm, ejector force: 33 N, ejector stroke: 150 mm, total length: 5,000 mm, total width: 1,600 mm, total height: 2,000 mm, overall weight: 8,200 kg, heating capacity: 15.5 kW (21.07 HP), pump power: 2,200 W, type of input current: three-phase, Equipment: documentation/manual, The machine has been regularly maintained, test possible. Nkedpsxvqnnofx Agwjw

Condition: used, functionality: fully functional, Year of construction: 2012, DUE TO CHANGEOVER TO HEUFT THERMAL OIL OVEN TECHNOLOGY WE OFFER: Used HEIN oven system 5 StoneRoll 2 Ecostone² with baking technology 5 HEIN STONEROLL ANNULAR TUBE DECK OVENS ▪ TYPE: SR 106 3/8 ▪ 3 BAKING TRAYS 1000 X 600 PER SHELF ▪ 8 LEVELS = 24 BAKING TRAYS ▪ BAKING SURFACE: 14.4 M² ▪ USABLE HEIGHT PER DECK ~ 178.7 MM ▪ EXTERNAL DIMENSIONS: 1900 X 2500 X 3590 (BHT) ▪ BURNER: OIL ▪ WITH TROLLEY DRIVE ▪ YEAR OF CONSTRUCTION: 2012 ACCESSORIES: ▪ 15 BAKING TROLLEYS WITH 8 TRAYS ▪ 2 STONE TROLLEYS ▪ 1 LOADING TROLLEY ▪ 1 UNLOADING TROLLEY ▪ 1 COOLING TROLLEY 2 HEIN ECOSTONE² RACK OVENS ▪ TYPE: LR1-108-5-D ECOSTONE ▪ ROTATING PLATE ▪ FOR BAKING TRAYS 1000 X 600 ▪ BAKING SURFACE: 12 M² ▪ EXTERNAL DIMENSIONS: 175 X 168 X 2970 (TBH) ▪ CONNECTED LOAD ACCORDING TO MANUFACTURER: 100 KW ▪ BURNER: OIL ▪ TOUCHSCREEN COMPUTER CONTROL ▪ YEAR OF CONSTRUCTION: ONE OVEN BUILT IN 2019, ONE OVEN BUILT IN 2017 Below are the key details: • Loading: We will load the equipment onto the buyer’s trucks. • Condition: Sold as seen on site, without installation or warranty. Nsdpfx Agsu Uubhowekw • Inspection: The ovens are currently operational and can be visited for inspection at their location in St. Vith, Belgium, near the German border. Note: All information is provided to the best of our knowledge but without guarantee. Errors, prior sale, and technical changes are reserved. There may be deviations from the listed accessories.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 878 40013, clamping force: 2,500 kN, Fully operational machine. Numerous wear parts have been replaced recently. Nedpfextmp Nex Agwekw

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Nkjdowl Rucepfx Agwew Hersteller: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg

Condition: good (used), Year of construction: 2001, Ref. no.: 18404 Hersteller: ARBURG Type: 420C-1300-350 Year of construction: 2001 Clamping unit Clamping force: 130 ton Opening stroke: 500 mm Distance between tie bars: 420 x420 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 605 x 605 mm Injection unit Screw diameter: 45 mm Injection volume: 230 cm³ Shot weight: 210 g Injection pressure: 1670 bar Measurements and weight Dimensions: 4,68 x 1,3 x 2,2 m Nkodswm I A Tspfx Agwow Machine weight: 4080 kg Additional information & extras Core pull: 1 pcs

Condition: good (used), Year of construction: 1998, Ref. no.: 17507 Hersteller: DEMAG Type: ERGOtech system 800-310 Year of construction: 1998 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Nkedpfxjwm Iyfj Agwsw Dimensions: 4,1 x 1,4 x 2,0 m Machine weight: 3700 kg

Condition: good (used), Year of construction: 1997, Ref. no.: 18142 Hersteller: DEMAG Type: Ergotech pro 50-270 Year of construction: 1997 Clamping unit Clamping force: 50 ton Nkodpfx Aowm Iz Aogwew Opening stroke: 400 mm Distance between tie bars: 355 x 355 mm Mould height min.: 210 mm Platen size (h x v): 540 x 540 mm Injection unit Screw diameter: 35 mm Injection volume: 106 cm³ Shot weight: 95 g Injection pressure: 2573 bar Measurements and weight Dimensions: 3,65 x 1,15 x 1,18 m Machine weight: 3600-2500 kg

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Hersteller: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Nkedpfx Aewm Iy Ejgwow Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Hersteller: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Nedpfjwm Iz Njx Agwekw Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009