Frame press

Casolin BU JUNIOR

Condition: used, Length 2700 mm Width 1100 mm Height 850 +- 150 mm engine output 0,37 kW Electric capacity 0,5 kw compressed air 6 bar Horizontal impregnation system 'Pro flow' for individual parts with rinsing circuit. ----- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. ----- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blow-off and outlet. Horizontal feed of the workpieces By motor-driven rollers made of plastic with grooves. Electrical converter for controlling and changing the conveying speed. transmission The machine is equipped with an exclusive system so that all Gear located outside the flood chamber and easily accessible to the Operators are to guarantee a longer service life and the to facilitate maintenance operations. The moving components are protected by cover plates and appropriate seals protected. circulation pump Pneumatic double diaphragm pump made with valves, seals and diaphragms Nitrile rubber and housing made of plastic material (PVDF). air jets A blow-off system is present in the first chamber to prevent product leakage avoid. A second blow-off system after the flood chamber blows off the excess product from the workpiece. Electrical panel According to CE, degree of protection IP 55. Including inverter to the Lhedsnl Nqqspfx Ad Asf set feed rate. technical features Length mm 2700 Width mm 1100 Conveyor speed (min./max.) m/min 3-6 Motor power train group kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 +- 150 Min. length of the workpieces to be flooded mm 250 Max. width of the workpieces to be flooded mm 300 Max. height of the workpieces to be flooded mm 250 Compressed air consumption lt/min 2000 Pressure of the required compressed air bar 6 Equipment and available accessories Flushing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))

Year of construction: 2012, condition: excellent (used), Window production line WEINIG Lodpfx Aoh H Iyxod Aehf consists of: Unirex 3000 machining center Univar 15 Unitex 15

Year of construction: 2010, condition: good (used), CNC BIESSE BREMA EKO 902 INSERTS FOR SALE TECHNICAL DETAILS: 3-AXIS C.N.C. MACHINING CENTRE (X-Y-Z) - Integral protection of the operating spindle and the working area on the machine. - Numerical control (control) with BIESSE Works software on Windows. Lhjdpohknbrefx Ad Ajf - Vertical positioning of the panels, with N. 2 panel locking clamps. - Panel feed (in X-axis direction, on the lower support with rubber wheels), movement (in X-axis) of the panel/board clamps. DIMENSIONS OF THE PALLETS (WORKING DIMENSIONS): - Length Min mm 160 / Max mm 3200 - Width Min mm 35 / Max mm 900 - Wait Min mm 8 / Max mm 80 WORKING GROUPS: - No. 1 Spindle (electro-spindle) vertical ER32 (KW 4,5) with reversing (up to 18000 RPM). - No. 1 Circular saw (for grooves) diameter mm 120 (fixed X axis) - No. 13 Independent vertical spindles for drilling (6 in X-axis + 7 in Y-axis) - Nº 8 Independent horizontal spindles for drilling (3+3 on X axis and 1+1 on Y axis) - Nº 1 Hinge drilling head unit - Total installed power 20 KW AUTOMATIC DOWEL INSERTION GROUP ON BOTH SIDES WITH PRESSURE PUMP TO APPLY THE GLUE.

Condition: used, max. tool diameter , mm 0 , mm operating pressure , bar filling amount 52 l Quicksonic QS 520 Ultrasonic cleaning device with lid and work basket ----- Technical manufacturer's description: External dimensions (length x width x height): 560 x 460 x 510 mm Useful dimensions (length x width x height): 500 x 400 x 260 Useful basket dimensions (length x width x height): 444 x 364 x 224 Capacity: approx. 52 l Ultrasonic power Rated power: 800 watts Lhjdpfx Ajumng Aod Aof Peak power: 1600 watts Operating frequency: 40 or 25 kHz Mains voltage: L+N+PE, 230 V/50-60 Hz Heating power: 2000 watts Heating control: 30 - 85°C Timer: 0-15 min & Duration ----- All prices ex works plus packaging, transport, insurance, and statutory VAT. (Technical specifications according to the manufacturer - without guarantee!)

Condition: new, working length 2451 mm Working width 2170 mm Working height 800-1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ----- base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor system for wood lengths from 300mm to 4200mm - Conveyor system for wood widths up to 240mm Roller conveyor - infeed - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG Ljdpfxoi Hmpij Ad Aehf cross conveyor - Cross conveyor with 6 traverses - Conveyor belts PVC coated (green) 50mm wide, guided in plastic tracks - Continuously driven cross conveyor approx. 5 - 20m/min - Drive via geared motor 0.37kW - Approximately 1750mm lock to lock Roller conveyor - outlet - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG ----- Conveyor belt approx. 320mm x 3500mm base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor belt for wood lengths from 300mm to 4200mm - Conveyor belt for timber widths up to 240mm - Conveyor belt on castors with brake tape - Continuously driven approx. 5 - 25m/min - Drive via geared motor 0.37kW - Tape PVC coated 260mm wide - Stop on both sides approx. 15mm ----- Steering: - Ready to plug in with its own controller and logic - Siemens PLC, 24VDC - Siemens frequency converter - Optical limit switches and emergency stop loop - Ready installed with 16A Euro plug - Connection: 400V AC, 2kW, 50Hz ----- Pneumatic: 6-8 bar, consumption approx. 16NL/min Colour: RAL 7035 light grey Basic EC Directive 2006/42/EC in accordance with 2006/95/EG Electrical Equipment (Low Voltage Directive) and 2004/108/EC EMC Directive ----- Price of the above version ex works: on request! plus packaging and transport costs ----- (Technical information according to the manufacturer without guarantee!)

Condition: new, Year of construction: 2025, functionality: fully functional, ACTION M frame press Press for any kind of window system: windows, slatted shutters, shutters and solid wood doors. Max working dimensions L x H 3500x2500 mm Min working dimensions L x H 250x375 mm Max vertical/horizontal thrust 7,4/2 ton Working height 480/1050 mm Hydraulic pump power 2.1 kW MACHINE COMPOSITION: ACTION M ACTION M FRAME PRESS num 1 109831 Normative CE per SM 1 R00494 action m 35-25 1 930731 Volt 400 EU 1 931201 Frequency 50 Hz 1 530074 PVC-coated beams working surfaces 1 530075 Intermediate manual crossbeam complete of piston and counter-stop 1 Lhjdpfxewh T Dlo Ad Asf 530076 Hydraulic system for low pressure working 1 530077 Equipment for trapezoidal products with oscillating head to adapt to the different corners of the windows system 1

Condition: used, Year of construction: 2014, Capacity 300cm/180cm 1.5kw hydraulic unit Lhedpfx Ajwz Uvpod Aef 380V Weight 1.200kg

Condition: used, Year of construction: 2006, Capacity 300/185cm 1.5kw hydraulic unit Lhjdpfx Adewy Dlko Asf 380V Digital display

Condition: excellent (used), Year of construction: 2008, I sell the double side throughfeed CNC working centre Biesse Skipper 100 Year 2008. Very productive and fast. Automatic infeed table. Working length 90-3000mm Working width 70-1000mm Working height 8-60mm Configuration per side: Milling head 3,5 kW, 7000-18000 rpm 29+8+2 Drilling heads 1 Grooving saw D.150mm X-direction Software BiesseWorks. CD included. Version with outfeed table. Condition very good ! Fully working. Automatic system of central lubrication and dust collection connections. Complete with safety barriers, Transport elements and CE-points. Lhodpfx Aoq Diw Ajd Aef CE-certyficate and full documents included.

Condition: good (used), functionality: fully functional, Conveyor belt Transport belt Lodpfx Adevn Sk Ss Ashf Belt conveyor Conveyor belt L 7600 x W 350 x H 900 mm Belt width: 240 mm 3-phase permanent magnet motor Rexroth cleaned, repaired & function tested