Press container wet waste press

Bergmann MPB405 SN/10

Condition: as good as new (ex-display), For sale Fpedpfxjh Uqibj Andsi Demag wheelblocks New and uses NB! we have more than 15,000 Demag parts in stock see our website or other ads

Condition: new, Year of construction: 2025, machine/vehicle number: 472684923, Gasparin Jaw Crusher GI107CV Vesuvio, mobile jaw crusher on a tracked chassis The mobile crusher GI107 VESUVIO stands for versatility and can be configured in two different ways. Equipped with a Grizzly vibrating feeder (GI107C), it is suitable for more traditional applications. With a vibrating feeder and pre-screen, the machine (GI107CV) is suitable for demanding applications with high fines content and high material moisture. With its standard equipment featuring the patented HCS system (Hydraulic Crushing System), VESUVIO is the best solution for the requirements of professionals and rental companies. Production capacity: approx. 320 tons/hour Patented HCS system Proportional valve with "Load Sensing" for system optimization and a reduction in fuel consumption of approximately 30%. Jaw gap hydraulically adjustable, even during the crushing process Fast locking system with wedges and tilting cylinders Discharge height 3000 mm Dust extraction Tank pump Magnetic separator Warranty 1 year, up to a maximum number of operating hours from the start of operation Technical data: Jaw crusher 1020 x 700 mm Crushing gap from 45 to 180 mm Hopper 5 m³ - 2000 x 3960 mm Two-deck vibrating screen 1020 x 1800 mm Main conveyor belt 800 x 9600 mm 4-cylinder diesel engine with constant speed, 82 HP / 60 kW, emission stage V Control panel Tracked chassis 400 x 3310 mm Weight: kg Fodpfehd I Rzox Andjpi Transport length 12900 mm Transport width: 2530 mm Transport height 3200 mm Further information: Application: Construction, General condition: very good, Technical condition: very good, Optical condition: very good

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 1590, Equipment: cabin, hydraulics, Zenith Machinenfabrik GMBH Neunkirchen/Siegerland GERMANY Used for production of concrete vibropressed pavement and borders. The machine is fully functional and it comes togheter with 2 mixers, bunkers for aggregates, skippers, packaging machine and 150 pallets for production. It also has included molds for different pavement models. Fjdpeucruusfx Andspi We also have to sale a Mobil Zenith 941 II A from 1978 which also has the identification plate attached. The machine is beeing sold because it was replaced with newer techonology.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Fedpfstvau Ajx Andopi Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Year of construction: 2023, condition: new, machine/vehicle number: 6YXXX23, SINC FEROX is the must have machine in scrap business, to reduce the volume or to prepare scrap for baling or just to get it in to size for melting. FREOX alligator shears are available from 300mm up to 1000mm cutting size, as longer the cutting blade, as higher the cutting force. Fpsdpfsmqku Uox Andsi The machines are able to operate with pedal, semi-automatic and full-automatic. The option to set the cutting opening is easy solved with the manual limitation. The machines are designed for to have minimal service needs; the blades are reversible to be reused on all four edges.

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg The hydraulic unit is functional, the drive motor is in the removed state. Fpjdpfxjic Rl Do Andei

Condition: good (used), Manufacturer: MBT Type: MV-250 S Motor: 5.5 kW Hopper size: 780 x 600 mm Housing size: 3500 x 1000 x 2200 mm Fpjdpfx Aehzr U Iondei

Year of construction: 2001, condition: excellent (used), Single screw extruder WEBER NE5 1-30:D with 2 co-extr. WEBER ZE30 Fedpfx Aehy Tp Dondepi Year of construction 2001 Screw diameter 50 mm Application:PE-PP, Three-layer pipes or pipes with colored stripes The plant has manufactured heating pipes Condition: very good 2 Co-Extruders WEBER ZE30 Screw diameter 30mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Year of construction: 2011, condition: good (used), Offer 24370 Sludge filtration system in a sea container + conveyor belt Technical data: - Sludge filter press JUNGHANS with cylinder unit - Flocculation system - Pumps - Separate conveyor belt for sludge removal, length 8.0 m - Control cabinet with electrical equipment - Water collection tray made of aluminum on the entire container floor - Lighting - Sea container with 4 doors - Space requirement for the container: approx. W 6.0 x H 2.4 x D 2.4 m - Weight: approx. 5000 kg - Space requirement for the conveyor belt: approx. W 8.0 x H 0.8 x D 1.0 m - Weight: approx. 1000 kg Fsdpfx Anet Srkpsdopi

Condition: ready for operation (used), 30 kw main drive 3250 rpm 1.2 kg /dcm. exelent conditions Fpodpfox Aurkjx Andsi