Used Presses for sale (23)

input power: 110 kW (149.56 PS), type of input current: three-phase, Condition: used, Year of construction: 1988, Used Amandus Kahl C35-780 Pellet press Incl. Kahl band cooler KC 101-06 Hydraulic nut with pump and hand pump 4 rollers head 5 rollers head 5 new rollers New die and used die Bipknu2zy8s Various spare parts

Condition: used, Year of construction: 1990, pressure ca.10 t throat anpassbar mm Bmaunyt3v stroke 250 mm table surface area 220 x 220 mm mm material diameter max. ca. Ø 267 mm total power requirement 1,5 kW weight of the machine ca. 430 kg dimensions of the machine ca. 899 x 772 x 1520 m

Condition: new, Year of construction: 2019, This system is completely new, stored and packaged. The system was configured for processing fresh hardwood with an output of up to 2 t/h. It consists of the following positions: - Level indicator for pre-bin - Dosing screw DN 200, stainless steel - U-trough with lid - Worm shaft with full-blade helix - External roller bearings - Motor power: 2,2 kW with frequency converter B03dpxwiev - Mixing screw M 315, stainless steel - Tube housing with maintenance cover - Wormshaft with progressive feed and mixing paddles - External roller bearings - Slewing ring to swivel away from the press - Motor power: 5,5 kW - Water dosing unit - Output: 5-50 l/h at 3-10 bar - Dirt trap, solenoid shut-off valve, pressure reducer, inductive flow meter, control valve - Pipes and pipe fittings - Pelleting Press Amandus Kahl, type 39-1000 - Ambient temperature: 0 to + 40 ° C - Cast iron housing in the drive area - Dust and inlet hood with product distributor - Main shaft (vertical shaft) with axial and radial bearings - Roller head with product-specific pan grinder rollers - Discharge device - Worm gear - Oil lubrication system with pump - Motor power: 200 kW with speed monitoring - Press hydraulic system with hydraulic nut, hydraulic unit - and pump, control box - Central roller lubrication system with grease lubrication pump, lubricant distributor and pipes - Press outlet box with diverter flap, inspection opening, control nozzle, exhaust air connection, level sensor - Oil filling for the press (worm drive) - Oil cooler with pump, hose connections and temperature controller - Flat die with a hole diameter of 6 mm - Counterflow Cooler, vertical - Inlet rotary valve and product distributor - Suction hood, fire protection flap with electro-pneumatic actuation - Container walls, one side with door, hard glass pane and level indicator - Grid discharge with drive - Outlet funnel and supporting frame - Circular Vibrating Sieve - Vibration motor: 0,75 kW - Vibration-resistant steel construction - Screen covering, coil springs, supporting frame dustproof cover - Isolation frame to absorb the vibration energy - Cyclone (separation of fine particles) - Upper part with tangential dust air inlet nozzle and vertical clean air outlet - Lower part with cleaning flap - Rotary valve with adapter - Radial fan - Air ducts - Control System Kahl EAPR Complete - Power cabinet and PLC control - Monitoring and control of all drives and sensors / detectors - Load-dependent press control - Throughput control - Control panel (touchscreen) - Remote maintenance

Condition: new, 2456 CPM Bearings - Italy Cylindrical Roller Bearing Double Row New, never used 182 x 240 x 90 mm Weight 8,73 kg 47 units available WAREHOUSE LIQUIDATION ADDITIONAL BEARINGS AVAILABLE: NP342204-90WA2 TIMKEN x14 units 22324 EDK FAG x2 71976MP.P5.UO FAG x1 23276 BMB FAG x2 23222-E1-A-K-M FAG x1 23224 HL BM S x1 F36204 FAG x3 STF374KV5051GAS3 NSK x3 2456 CPM ITALY x47 NP838887 TIMKEN x2255 R425-1G4S7 NSK x2 2TR19H C3 FP KOYO x1 31318F FERSA x165 NP942053-902-A1 TIMKEN x12 2TR19H C3 FP KOYO x1 24168-B-C3 FAG x 2 01/02/0274/C5309 x2 NNU6810 NTN x3 612833-B SKF x6 Dmx3kh CP354256-90001 TIMKEN x2 NU2324 EC ML SKF x1 23238C E4 S11 NSK x4 2IE.083.00 x2 SL182244-BR-A INA x1 23088-K.MB.R1000.1130.J15B FAG x2 612833-B SKF x6

Condition: used, Year of construction: 2018, Bosch Rexroth stroke-rotation unit Pneumatic cylinder Compressed air cyl. no. 3842 525849 2 units are available. Fzfgz70 The device has never been in use

Condition: refurbished (used), Year of construction: 1999, A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Fflenrk Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Refurbished Pharmapaktor APC L200/50. The Hosokawa Alpine APC L200/50 Pharmapaktor is the perfect compactor to test the product behaviour with this technology, while it even allows to keep a continuous production at small scale if needed. The Pharmapaktor can be fitted with a flake crusher to granulate the resulting compacted material increasing the possibilities of end product sizes and forms, from different sort of briquettes to granulates according to the required specification. Thanks to its flexibility, the machine can be adapted to different products and tasks. It even complies with the tough pharmaceutical standards. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the rollers. Pre-compaction unit The pre-compaction unit is mounted on a supporting column and can be lifted and swivelled to the side. The charging hopper (with 2 brake bars) is equipped with a cylindrical/conical precompression screw. When the pre-compaction unit is lifted off, a limit switch switches off the compacting rollers and the screw. Construction materials: Non product contacted parts: stainless steel Product contacted parts: stainless steel Non pressure shock resistant (NPSR) Non ATEX (can be implemented for an additional price) Without vacuum deaeration (can be implemented for an additional price) Scope: Hosokawa Alpine Pharmapaktor APC L 200/50, including feeding, without Flake Crusher.

Condition: used, Year of construction: 1995, Used van Aarsen C750 Pelletmill / Pelletpress Incl. Feederscrew, mixer 160kW IE3 WEG Main motor Automatic rolleradjustment B8mjuedstf Incl. rollers and frame Mainshaft refurbished 2-3 years ago Available med April-Mei

Condition: refurbished (used), Year of construction: 1970, CPM Europe 90KW pellet mill. Including spare parts such as bearings, dies, rollers etc. 3.5mm die for pressing feed. But can also be converted to other materials. In tact, has only produced about 2000 tons/year at half load. C00kkqqyaa

Condition: refurbished (used), The plant includes: 1. pc. steel construction for 2 pellet mill type C45-1250 - Overview drawing - 2x electric chain hoist for dismantling the pan grinder head and the dies 2. pcs. Amandus Kahl pellet mill type C45-1250 overhauled - all bearings checked / changed - 4 - fold roller head with roller track 192 mm - King shaft checked - Die seat overhauled Chhebymjll - Oil system refurbished - Gear wheel and worm screw shaft in very good condition Condition: overhauled and checked -roller mill outlet box equipped with: - deflection flap - control spout - aspiration opening - Produkt flow indicator Condition: overhauled and tested 2.pcs. Drive for the press consisting of: - tensioning rails - V-belt pulley - V-belt - V-belt guard - Three-phase motor in foot-mounted design, power 250 KW, design according to Atex 22 Condition: overhauled and tested 2.pcs. Hydraulic system for roller head for stepless change of the distance between rollers and flat die as well as for the quick and easy and unloading of the roller head. consisting of: - Hydraulic nut with double swivel joint - high pressure hose + couplings - electric hydraulic pump - control box with corresponding actuation Condition: overhauled and tested 2.pcs. Central roller head lubrication for the lubrication of the roller bearings during operation of the press. Consisting of: - Lubricant distributor with piping and coupling - Hose with central grease nipple - Grease lubrication pump unit with container Condition: overhauled and tested 1.pcs. steep belt conveyor for pellets Conveyor belt is as good as new, has to be re-clamped during during assembly. Condition: overhauled and checked 1.pcs. Counterflow cooler, hourly capacity 8 -9 t/h - dimensions 2800 x 2400 x 2000 mm - Inlet rotary lock cooler is in mint condition 1.pcs. Conveyor belt Feed from cooler to pellet sieve 1.pcs. Aspiration for counterflow cooler with rotary feeder, cyclone separator and low-pressure fan of suitable capacity. 1.pcs. Buehler vibrating screen type DFTA 23 4 fractions 3 screen covers Inlet with flap adjustment The covering of the screen ceilings must be discussed and calculated separately. Condition: overhauled and inspected 2.pcs. Control system with touch display for presses and control cabinet for the load part.

Condition: excellent (used), Squeezing machine for container Teja PWM-300 Ckmicfrs Hydraulic pressure max. 20 Mpa Power approx. 62 to at 20 Mpa designed for pressing out mixing vessels with 950 mm diameter Very good ready to use condition, directly from production!!!

Condition: ready for operation (used), Year of construction: 1992, Strand thickness: 12-100mm, compressed air supply: 6bar, compressed air consumption: 20NL/min, connected load: 40kW, weight: 6.7t, including various calibres and moulds. Bdlup8ftq9

Condition: ready for operation (used), Pellet mill for the production of e.g. feedstuff Bbwba8khxrb - Horse feed mineral pellets - With different die configuration also possible to produce wood pellets But only pressed about 2000to horse mineral pellets annually. In 2018 & 2019, the press was serviced and has not been in use since 2020. Various spare parts are also available as well as replacement dies.

Condition: refurbished (used), Pelleting Press - Amandus Kahl - C60-1250 Basic pelleting press consisting of: Ce2z9jxxep split cast housing with cooling fins in the drive area drive consisting of worm shaft and worm wheel (made of bronze), in good condition main shaft with grooves and new fether keys main bearing / worm shaft bearings + seals in the gear unit completely revised / checked new oil system installed with oil pump, filter, flow meter, thermometer and dirt trap knifes holder and knifes below the die revised and checked die seat revised and checked pelleting press dust hood with exhaust air connection housing and attachments sandblasted and powder coated drive accessories: tensioning rail, V-belt pulley, V-belt, V-belt guard _____ WITHOUT FLAT DIE WITHOUT PRESS DISCHARGE BOX WITHOUT MOTOR WITHOUT HYDRAULIC SYSTEM (for stepless height adjustment of the roller head) _____ The following OPTIONS are possible: Drive: Motors: 2x 200 kW available with and without ATEX possible Roller head: completely revised (depending on availability 4 or 5 pan grinder rollers possible) with grease or oil lubrication; depending on requirements adjustable roller head end stop execution of pan grinder rollers according to customer raw material lubrication unit, lubricant distributor and all lines and couplings for central grease lubrication of the pan grinder roller bearings during operation Hydraulic system: for stepless height adjustment of the roller head above the flat die and adjustment of the pan grinder roller gap (gap between pan grinder roller and flat die), hydraulic nut with swivel joint and spacer rings, completely revised and checked for function hydraulic unit for hydraulic nut, manually operated or electrically Inspection of the machines by appointment.

Condition: good (used), Due to its construction, this press is designed for pelletising animal feed. We do not recommend its use for biomass or wood pelleting. We recommend a flat die press for this purpose, which we of course also offer. Bzdbujalod Ring Die Pelleting Press - Data Ring Die: - Diameter: 400 mm - Width: 70 mm - Borehole diameter: 8 mm - Amount of knifes: 2 - Amount rollers: 2 - Drive: - Motor: BBC - Type: QU 180 L6 AG - 15 kW, 970 rpm, 380 V, 50 Hz - Protection class: IP 54

Condition: refurbished (used), Basic pelleting press consisting of: - split cast housing with cooling fins in the drive area drive consisting of worm shaft and worm wheel (made of bronze), in good condition - main shaft with grooves and new fether keys - main bearing / worm shaft bearings + seals in the gear unit completely revised / checked - new oil system installed with oil pump, filter, flow meter, thermometer and dirt trap - knifes holder and knifes below the die revised and checked die seat revised and checked - pelleting press dust hood with exhaust air connection housing and attachments sandblasted and powder coated - drive accessories: tensioning rail, V-belt pulley, V-belt, V-belt guard _____ WITHOUT FLAT DIE WITHOUT PRESS DISCHARGE BOX Bzrm8zhmtl WITHOUT MOTOR WITHOUT HYDRAULIC SYSTEM (for stepless height adjustment of the roller head) _____ The following OPTIONS are possible: Drive: - Motor between 250 - 315 kW - with and without ATEX possible Roller head: - completely revised (depending on availability 3, 4 or 5 pan grinder rollers possible) - with grease or oil lubrication; depending on requirements adjustable roller head end stop - execution of pan grinder rollers according to customer raw material - lubrication unit, lubricant distributor and all lines and couplings for central grease lubrication of the pan grinder roller bearings during operation Hydraulic system: - for stepless height adjustment of the roller head above the flat die and adjustment of the pan grinder roller gap (gap between pan grinder roller and flat die) - hydraulic nut with swivel joint and spacer rings, completely revised and checked for function - hydraulic unit for hydraulic nut, manually operated or electrically Inspection of the machines by appointment.

Condition: refurbished (used), Basic pelleting press consisting of: - split cast housing with cooling fins in the drive area drive consisting of worm shaft and worm wheel (made of bronze), in good condition - main shaft with grooves and new fether keys - main bearing / worm shaft bearings + seals in the gear unit completely revised / checked - new oil system installed with oil pump, filter, flow meter, thermometer and dirt trap - knifes holder and knifes below the die revised and checked - die seat revised and checked - pellet press dust hood with exhaust air connection Ccclwcrw housing and attachments sandblasted and powder coated drive accessories: tensioning rail, V-belt pulley, V-belt, V-belt guard _____ WITHOUT FLAT DIE WITHOUT PRESS DISCHARGE BOX WITHOUT MOTOR WITHOUT HYDRAULIC SYSTEM (for stepless height adjustment of the roller head) _____ The following OPTIONS are possible: Drive: - Motor between 55 -75 kW - with and without ATEX possible Roller head: - completely revised (depending on availability 3 or 4 pan grinder rollers possible) - with grease or oil lubrication; depending on requirements - adjustable roller head end stop - execution of pan grinder rollers according to customer raw material - lubrication unit, lubricant distributor and all lines and couplings for central grease lubrication of the pan grinder roller bearings during operation Hydraulic system: - for stepless height adjustment of the roller head above the flat die and adjustment of the pan grinder roller gap (gap between pan grinder roller and flat die), - hydraulic nut with swivel joint and spacer rings, completely revised and checked for function hydraulic unit for hydraulic nut, manually operated or electrically

Condition: excellent (used), For further details, please look at drawings. Ccywesxvfr

Condition: excellent (used), Bottom Part Kahl Pelleting Press 40-1000 - Cast housing with cooling fins in the drive area - Bearing seats for worm shaft By80kju9uc - Support for the vertical shaft bearing sleeve - Support surface for mounting the middle section - Opening for the gear oil cover to check the oil quality - Cover for gear oil - Oil drain opening - Mounting feet for concrete foundation assembly All seats and assembly surfaces checked / refurbished if necessary Housing sandblasted Priming and painting by arrangement

Condition: reconditioned (used), Pelleting Press - Amandus Kahl - C55-1500 Basic pelleting press consisting of: split cast housing with cooling fins in the drive area drive consisting of worm shaft and worm wheel (made of bronze), in good condition main shaft with grooves and new fether keys main bearing / worm shaft bearings + seals in the gear unit completely revised / checked new oil system installed with oil pump, filter, flow meter, thermometer and dirt trap knifes holder and knifes below the die revised and checked die seat revised and checked pelleting press dust hood with exhaust air connection housing and attachments sandblasted and powder coated drive accessories: tensioning rail, V-belt pulley, V-belt, V-belt guard _____ I2lss8rz WITHOUT FLAT DIE WITHOUT PRESS DISCHARGE BOX WITHOUT MOTOR WITHOUT HYDRAULIC SYSTEM (for stepless height adjustment of the roller head) _____ The following OPTIONS are possible: Drive: Motors: 1x 320 kw available with and without ATEX possible Roller head: completely revised (depending on availability 4 or 5 pan grinder rollers possible) with grease or oil lubrication; depending on requirements adjustable roller head end stop execution of pan grinder rollers according to customer raw material lubrication unit, lubricant distributor and all lines and couplings for central grease lubrication of the pan grinder roller bearings during operation Hydraulic system: for stepless height adjustment of the roller head above the flat die and adjustment of the pan grinder roller gap (gap between pan grinder roller and flat die), hydraulic nut with swivel joint and spacer rings, completely revised and checked for function hydraulic unit for hydraulic nut, manually operated or electrically Inspection of the machines by appointment.

Condition: refurbished (used), Basic pelleting press consisting of: • split cast housing with cooling fins in the drive area • drive consisting of worm shaft and worm wheel (made of bronze), in good condition • main shaft with grooves and new fether keys • main bearing / worm shaft bearings + seals in the gear unit completely revised / checked • new oil system installed with oil pump, filter, flow meter, thermometer and dirt trap • knifes holder and knifes below the die revised and checked • die seat revised and checked • pellet press dust hood with exhaust air connection Gffjxmjiq • housing and attachments sandblasted and powder coated • ambient temperatures: 0°C up to +40°C _____ • WITHOUT FLAT DIE • WITHOUT DISCHARGE BOX • WITHOUT MOTOR • WITHOUT HYDRAULIC SYSTEM (for stepless height adjustment of the roller head) _____ The following OPTIONS are possible: Drive: • Motor from 160 up to 200 kW • with and without ATEX • drive accessories such as tension rail, V-belt pulley, V-belt, V-belt protection Roller head: • completely revised (depending on availability 4 or 5 pan grinder rollers possible) • with grease or oil lubrication; depending on requirements • adjustable roller head end stop • execution of pan grinder rollers according to customer raw material • lubrication unit, lubricant distributor and all lines and couplings for central grease lubrication of the pan grinder roller bearings during operation Hydraulic system: • for stepless height adjustment of the roller head above the flat die and adjustment of the pan grinder roller gap (gap between pan grinder roller and flat die) • hydraulic nut with swivel joint and spacer rings, completely revised and checked for function • hydraulic unit for hydraulic nut, manually or electrically operated

Condition: refurbished (used), Basic pelleting press consisting of: • split cast housing with cooling fins in the drive area • drive consisting of worm shaft and worm wheel (made of bronze), in good condition • main shaft with grooves and new fether keys • main bearing / worm shaft bearings + seals in the gear unit completely revised / checked • new oil system installed with oil pump, filter, flow meter, thermometer and dirt trap • knifes holder and knifes below the die revised and checked • die seat revised and checked • pellet press dust hood with exhaust air connection • housing and attachments sandblasted and powder coated • ambient temperatures: 0°C up to +40°C _____ • WITHOUT FLAT DIE • WITHOUT DISCHARGE BOX • WITHOUT MOTOR • WITHOUT HYDRAULIC SYSTEM (for stepless height adjustment of the roller head) Hhx90wab8 _____ The following OPTIONS are possible: Drive: • Motor from 55 up to 75 kW • with and without ATEX • drive accessories such as tension rail, V-belt pulley, V-belt, V-belt protection Roller head: • completely revised (depending on availability 4 or 5 pan grinder rollers possible) • with grease or oil lubrication; depending on requirements • adjustable roller head end stop • execution of pan grinder rollers according to customer raw material • lubrication unit, lubricant distributor and all lines and couplings for central grease lubrication of the pan grinder roller bearings during operation Hydraulic system: • for stepless height adjustment of the roller head above the flat die and adjustment of the pan grinder roller gap (gap between pan grinder roller and flat die) • hydraulic nut with swivel joint and spacer rings, completely revised and checked for function • hydraulic unit for hydraulic nut, manually or electrically operated

Condition: refurbished (used), Basic pelleting press consisting of: • split cast housing with cooling fins in the drive area • drive consisting of worm shaft and worm wheel (made of Etbd8mf bronze), in good condition • main shaft with grooves and new fether keys • main bearing / worm shaft bearings + seals in the gear unit completely revised / checked • new oil system installed with oil pump, filter, flow meter, thermometer and dirt trap • knifes holder and knifes below the die revised and checked • die seat revised and checked • pellet press dust hood with exhaust air connection • housing and attachments sandblasted and powder coated • ambient temperatures: 0°C up to +40°C _____ • WITHOUT FLAT DIE • WITHOUT DISCHARGE BOX • WITHOUT MOTOR • WITHOUT HYDRAULIC SYSTEM (for stepless height adjustment of the roller head) _____ The following OPTIONS are possible: Drive: • Motor from 200 up to 315 kW • with and without ATEX • drive accessories such as tension rail, V-belt pulley, V-belt, V-belt protection Roller head: • completely revised (depending on availability 4 or 5 pan grinder rollers possible) • with grease or oil lubrication; depending on requirements • adjustable roller head end stop • execution of pan grinder rollers according to customer raw material • lubrication unit, lubricant distributor and all lines and couplings forr central grease lubrication of the pan grinder roller bearings during operation Hydraulic system: • for stepless height adjustment of the roller head above the flat die and adjustment of the pan grinder roller gap (gap between pan grinder roller and flat die) • hydraulic nut with swivel joint and spacer rings, completely revised and checked for function • hydraulic unit for hydraulic nut, manually or electrically operated

Condition: refurbished (used), Basic pelleting press consisting of: • split cast housing with cooling fins in the drive area • drive consisting of worm shaft and worm wheel (made of bronze), in good condition • main shaft with grooves and new fether keys • main bearing / worm shaft bearings + seals in the gear unit completely revised / checked • new oil system installed with oil pump, filter, flow meter, thermometer and dirt trap • knifes holder and knifes below the die revised and checked • die seat revised and checked • pellet press dust hood with exhaust air connection • housing and attachments sandblasted and powder coated • ambient temperatures: 0°C up to +40°C _____ • WITHOUT FLAT DIE • WITHOUT DISCHARGE BOX • WITHOUT MOTOR • WITHOUT HYDRAULIC SYSTEM (for stepless height adjustment of the roller head) _____ The following OPTIONS are possible: Ce2whpjc Drive: • Motor from 200 up to 315 kW • with and without ATEX • drive accessories such as tension rail, V-belt pulley, V-belt, V-belt protection Roller head: • completely revised (depending on availability 4 or 5 pan grinder rollers possible) • with grease or oil lubrication; depending on requirements • adjustable roller head end stop • execution of pan grinder rollers according to customer raw material • lubrication unit, lubricant distributor and all lines and couplings for central grease lubrication of the pan grinder roller bearings during operation Hydraulic system: • for stepless height adjustment of the roller head above the flat die and adjustment of the pan grinder roller gap (gap between pan grinder roller and flat die) • hydraulic nut with swivel joint and spacer rings, completely revised and checked for function • hydraulic unit for hydraulic nut, manually or electrically operated