Used paint finishing systems for sale (90)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Dwodpfewmm U Uox Agrsd

Condition: used, Year of construction: 2008, functionality: fully functional, compressed air connection: 5 bar, inner dimension height: 3,000 mm, inner dimension length: 17,700 mm, inner dimension width: 5,260 mm, Equipment: documentation/manual, Due to the restructuring of our workshop, we are offering our professional GARMAT spray booth installation for sale. The installation is currently in use and can be inspected while operational. Dismantling is possible from mid-December. This is a complete installation consisting of a spray booth, drying chamber, paint preparation area, burner, and ventilation and extraction systems. Dimensions: Laboratory / preparation area: 2.26 m wide x 5.26 m long x 3.03 m high Spray area: 6.00 m wide x 5.26 m long x 3.03 m high Floor extraction with a pit 5.00 m wide x 3.16 m long Wall extraction across the full width of 5.00 m and 2.00 m high Ceiling extraction available Drying chamber: 9.40 m long x 5.26 m wide x 3.03 m high Can be closed with two sliding doors Usable sliding door opening: 2.40 m Equipped with heating, extraction, and burner Technical data: Brand: GARMAT Dodpfj Agw A Tox Agrjwd Installation type: MASTER 15.5/5.26/3 Burner capacity: 300 kW Frequency controller included Includes control panel GMD 105 Separate paint preparation area with its own extraction system Technical specifications and detailed photos are available and are part of the sales information. Important: The installation is currently operational. Available for dismantling from mid-December. Dismantling, loading, and transport are the full responsibility of the buyer. Sale is in the condition the installation is currently in. Price: to be agreed / offers invited.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 9419257, total height: 2,500 mm, total length: 4,500 mm, total width: 2,200 mm, volume flow: 5,000 m³/h, type of input current: AC, overall weight: 600 kg, inner dimension height: 2,400 mm, inner dimension length: 3,800 mm, suction capacity: 4,500 m³/h, inner dimension width: 2,100 mm, input voltage: 400 V, space requirement height: 2,600 mm, space requirement length: 5,000 mm, Equipment: cabin, lighting, Selling a modular Straumann painting booth with few operating hours. Dwedpfx Aoz D Ifqjgred Straumann painting booth (year of manufacture 2021) – in good condition Selling a modular Straumann painting booth with few operating hours. Equipment & Details: Dimensions: Filter area 1.50 × 1.50 m, with extension and booth Work area approx. 2.10 x 2.40 x 3.50 m Technology: Extraction wall, fan with frequency converter, lighting Filtration: 3-stage filter system and 1+1 double door with filter for the afterflow air Construction: SVZ sheet metal panels, screwed together, smooth interior, with 1+1 double door Condition: Good, well-maintained, easily disassembled, as shown in the pictures. Design and details as shown in the pictures. Disassembly by the buyer; exhaust pipes can be taken over. Please contact me if you have any questions or would like to arrange a viewing. => Disassembly and removal by the buyer => Free of charge, including painting equipment / pressure tank with spray gun, as shown in the pictures => All information without guarantee. Subject to prior sale. Used system: Sale excluding any warranty or guarantee.

Condition: new, Paint booth / extraction wall for paint mist – various sizes | Royal Gold Industries Kft Professional paint mist extraction directly from the manufacturer | Custom dimensions | CE | 24 months warranty Available sizes and models Our paint booths and extraction walls are available in various dimensions. Choose the size that suits your workshop, paint shop or industrial production. 1800 × 1000 mm 1800 × 1500 mm 1800 × 2000 mm 2000 × 2000 mm 2300 × 1000 mm 2300 × 1500 mm 2300 × 2000 mm 2500 × 2000 mm 2800 × 2000 mm 3000 × 2000 mm Do you require different dimensions? As a manufacturer, we also produce individual custom sizes on request, tailored to your space requirements and specific application. High-performance paint mist extraction for professional painting With the paint booth or extraction wall from Royal Gold Industries Kft, you will receive a powerful and practical solution for professional painting. The paint mist extraction system captures the paint mist directly in the work area and supports a clean working environment and efficient workflows. Ideal for paint shops, metalworking companies, workshops and industrial manufacturing companies. Strong performance and precise control Equipped with a powerful 1.5 kW industrial motor, the system offers reliable extraction performance. An optional frequency converter can be integrated for stepless adjustment of the motor output. With a specified air flow rate of up to 11,150 m³/h at 860 Pa, this model is suitable for demanding extraction tasks in professional applications. Technical data of the 3000 × 2000 mm model Work area: 3000 × 2000 mm Motor output: 1.5 kW Electrical connection: 380 V / 16 A Air flow rate: up to 11,150 m³/h at 860 Pa Control: optional stepless adjustment Weight: approx. 185 kg Exhaust connection: right side, Ø 400 mm Marking: CE Warranty: 24 months Technical specifications refer to the 3000 × 2000 mm model. Depending on the size and configuration, the values may vary. Your advantages at a glance Effective capture of paint mist directly at the source Support for clean and efficient painting processes Various work areas for different requirements Optionally adjustable extraction performance Dwodo Agnyvjpfx Agred Space-saving integration into existing work areas Individual custom sizes according to customer requirements Direct purchase from the manufacturer without intermediaries Personal advice and support in the selection process Accessories and individual extensions Depending on the model and requirements, various extensions are possible: Multi-stage filter systems LED lighting Frequency converter for power control Individual special equipment Tailor-made solutions for your company Directly from the manufacturer: Royal Gold Industries Kft We are a manufacturer of industrial machines and extraction systems and offer solutions for commercial and industrial applications. Why Royal Gold Industries? Direct contact person at the manufacturer Manufacturing according to individual requirements Various standard sizes and custom dimensions Personal advice before purchase Delivery within Europe on request

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, For sale is a complete, fully functional automatic painting line, based on the Superfici Compact Spray 1300 automatic spraying system, along with a CEFLA drying system. The line is complete, currently assembled, and has been used in regular production. It is being sold as a complete technological line. The set includes: - Superfici Compact Spray 1300 painting machine - CEFLA drying tunnel – total length approx. 13 m - CEFLA control cabinet - CEFLA conveyor - GRACO Merkur X48 pump - GRACO D08B pump Condition: used, complete, and fully functional. The machine can be inspected on-site in Poland, in the Silesian Voivodeship (near Bielsko-Biała). Upon request, a video showing the line in operation and additional technical information are available. Available immediately. Dwsdpfx Agez Ix Azjred The terms for dismantling, loading, and transport can be agreed upon individually. Price: 49,900 EUR net.

Condition: used, Year of construction: 2007, operating hours: 20,000 h, functionality: fully functional, total height: 1,800 mm, total length: 1,000 mm, total width: 1,200 mm, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 6 m/min, feed length X-axis: 600 mm, feed length Y-axis: 600 mm, feed length Z-axis: 50 mm, We offer this used DIMA (Selective Protective Coating Machine) Hybrid Coating System HC-200, manufactured in 2007. Sale is ex works. Operating hours: 20,000 h, machine is operational. Dwodpfx Aez Ix R Eegrsd If you have any questions or require further information, please send us a message or call us. On-site inspection is welcome. Technical data: Type: HC-200 Selective protective coating machine Dimensions (L x W x H): 1000 x 1200 x 1800 mm (+500 mm for signal light) Stepper motor in combination with encoder, with ball screw and linear guide and spline axis XY speed 0.2 m/s Z-axis speed 0.1 m/s XYZ resolution 0.00625 mm Resolution of the rotary axis 0.036° Rotation 370 degrees Working area (based on a valve on the Z-slide) 600 x 600 mm – Z-movement 50 mm Inline chain conveyor 500 x 600 mm – Z-movement 50 mm Inline belt conveyor with clamping 525 x 600 mm – Z-movement 50 mm Min./Max. conveyor width (chain): 35 mm / 500 mm (manually adjustable) 35 mm / 500 mm (automatically adjustable) Min./Max. conveyor width (belt): 35 mm / 500 mm

Condition: used, Year of construction: 2018, operating hours: 4,717 h, functionality: fully functional, machine/vehicle number: 222319, total height: 6,500 mm, total length: 18,500 mm, total width: 12,500 mm, type of input current: three-phase, temperature: 250 °C, operating temperature: 250 °C, space requirement height: 6,500 mm, space requirement length: 19,000 mm, space requirement width: 12,500 mm, heating capacity: 30 kW (40.79 HP), year of last overhaul: 2023, Equipment: documentation/manual, emergency stop, lighting, We are selling our dipping conveyor system, which was installed in 2018 by Forplan AG. The system is fully functional and was used until 2022/2023 to overcome capacity bottlenecks, allowing for approximately single-shift operation. There are 4 sets of baskets (16 in total) for the system, with different wire diameters, making it suitable for smaller connecting elements, stamped, and bent parts that can be coated as bulk material. After prior arrangement, the system can be inspected at any time. Dwsdpfx Aszkt I Tegrjd

Condition: used, Powder coating booth with multi-cyclone and after-filter For sale is a professional, complete industrial system for powder coating: A Gema Volstatic powder coating booth, type MRS (multi-cyclone recovery system with after-filter). This system represents the highest Swiss quality, extreme robustness, and maximum efficiency in powder recovery. Thanks to its generous dimensions, it offers plenty of space for long and bulky workpieces. It is ideal for industrial companies, powder coaters, or workshops looking for a powerful and reliable system. Technical data • Manufacturer: Gema Volstatic • Type: MRS (multi-cyclone and after-filter system) • Electrical connection: 3 x 380 V / 50 Hz • Equipment: Booth substructure with inlet, manual coating opening, and spray gun travel slots. • Recovery: Highly efficient multi-cyclone with cleaning flap and powder collection container. • Extraction / After-filter: Powerful fan unit with integrated pressure monitoring and automatic flushing air filter cleaning. • Fan power after-filter: 15 kW with 12 filter plates (air volume flow: 8000 m³/h) 22 kW with 16 filter plates (air volume flow: 12000 m³/h) • Fan differential pressure: 4.2 kPa (at 8000 m³/h) or 4.5 kPa (at 12000 m³/h) • Compressed air connection: Min. 6 bar / Max. 10 bar (Recommended: 7 bar) • Compressed air consumption (flushing air filter box): Max. 18 Nm³/h • External dimensions: approx. Height 3.20 m × Length 8.50 m × Width 1.84 m • Internal dimensions (usable space): approx. Height 2.40 m × Width 1.84 m Item location: • 48683 Ahaus / Ottenstein (Münsterland, North Rhine-Westphalia) Djdpfsz Nyqwsx Agrewd Important pick-up & dismantling options (Please note): Option 1: Dismantling by the buyer The system must be professionally dismantled and transported by the buyer. Option 2: Our "all-inclusive package" (dismantling by us) Alternatively, we will take over the complete, professional dismantling of the system for you. Fixed price for this: 7,500,- € net (plus VAT). "Everything from one source: We would be happy to offer you a suitable bank financing option for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Powder coating booth with filter cart & fluidized bed For sale is a professional, industrial powder coating system from the traditional manufacturer Gema Volstatic. This is the proven MRS system (Multi-recovery System), which ensures highly efficient powder recovery (overspray extraction) and clean working conditions in the workshop. The system is extremely robust and, thanks to the generous manual coating opening, is ideal for manual operation (hand coating). Technical data & connection values: • Manufacturer: Gema Volstatic AG • System / Type: MRS booth with filter cart and fluidized bed • Electrical connection: Voltage 3 x 380 V / 50 Hz (standard three-phase) • Compressed air connection (input pressure): min. 6 bar / max. 10 bar (recommended pressure: 7 bar) • Compressed air quality: Water vapor content max. 1.3 g/m³, oil content max. 0.1 ppm • Compressed air consumption (filter plate cleaning): max. 18 Nm³/h • Fan output of the cleaning unit: • For organic powders: Depending on the number of filter plates, from 7.5 kW to 15 kW (volume flow up to 12,000 m³/h) • For powder coating: From 5.5 kW to 11 kW (volume flow up to 8,800 m³/h) • Fan differential pressure: 4.2 kPa (at 8000 m³/h) to 4.5 kPa (at 12000 m³/h) Dimensions & space requirements: • External dimensions of the booth: approx. Length 6.30 m × Width 2.52 m × Height 3.20 m • Internal dimensions of the booth (working area): approx. Length 6.00 m × Width 1.73 m • Dimensions of the platform: approx. Length 7.64 m × Width 2.45 m × Height 1.16 m Equipment & components: • Booth housing: Solid construction including booth inlet and booth substructure • Filter cart with fluidized bed: Excess powder is extracted downwards. The fluidized bed converts the powder into a liquid-like state using compressed air, so that it can be reprocessed and reused in the cycle (enormous material savings!). • Cleaning unit: Unit mounted on top including solenoid valve cover and sealing frame • Safety & control: Integrated pressure monitoring and pneumatic monitoring via the side control unit • Ergonomics: Hand lever valve for easy control directly on the booth, large manual coating opening for the operator, and gun travel slots on the back • CO₂ fire extinguishing system (fire protection system) Item location: 48683 Ahaus / Ottenstein (Münsterland, NRW) Dodpsz N Aivjfx Agrswd Important pick-up & dismantling options (Please note): Option 1: Dismantling by the buyer The system must be professionally dismantled and transported away by the buyer. Option 2: Our "all-inclusive package" (dismantling by us) Alternatively, we will take over the complete, professional dismantling of the system for you. Fixed price for this: €7,500.00 net (plus VAT). "We offer you a suitable bank financing option for your project." You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2020, operating pressure: 310 bar, pump capacity: 42 l/min, Graco Premier 42 liters/minute 6.9 GPM Ratio 45:1 Dodpjy Ul Dksfx Agrewd 310 bar / 4500 psi 2 units for sale Price per unit: €900

Condition: ready for operation (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: 070079A, total height: 4,500 mm, total length: 5,400 mm, total width: 5,500 mm, pressure: 6 bar, control cabinet height: 2,000 mm, control cabinet length: 2,500 mm, control cabinet width: 500 mm, operating temperature: 25 °C, working height: 950 mm, heating capacity: 107 kW (145.48 HP), number of seats: 66, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,350 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, emergency stop, Giardina drying oven, manufactured in 2007 with three different climate zones: evaporation zone - heating zone - drying zone Mobile pallets with conveyors, therefore no minimum size requirement for components Dedpfx Agezcnu Hsrowd Continuous vertical conveyor system

Condition: like new (used), Year of construction: 2016, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 16P1269203, type of input current: three-phase, operating pressure: 7 bar, pump capacity: 7 l/min, power: 0.06 kW (0.08 HP), Equipment: documentation/manual, MODE OF OPERATION The system is suitable for the proportioning (metering) and mixing of two- or multi-component products. An electronic control system monitors and regulates the specified mixing ratio. The base paint flows continuously, and the control system mixes the necessary amount of hardener (in timed intervals) via a valve. The flow rate of the base paint and hardener is measured with flow meter cells. With plunger pumps, stroke sensors can also be used. The components and cleaning agents are supplied by feed pumps. Color Selection The mixing ratios, pot life, etc., are stored in recipes. The color can be changed by simply switching recipes. Further Features and Applications: For low to medium pressure (32.5 MPa; 325 bar; 4714 psi). 2K COMFORT XL for high pressure (53 MPa; 530 bar; 7687 psi). Modular design – can be configured according to customer requirements. Electronic accuracy in metering ensures consistent quality. Processing of water-based 2K materials is also possible, as all material-contacting parts are suitable for this purpose – for example, made of stainless steel. The fluid component of the Ex version is suitable for use in potentially explosive areas (Zone 1 and 2). Many displays of the functions are language-independent and use simple symbols. Text is displayed in the selected language. Consumption overview for each component and for cleaning agents, VOC documentation. Storage of the last 700 error messages with date and time. Safety through continuous monitoring of system parameters, informing the operator when even the smallest malfunctions occur and, if necessary, automatically interrupting production. Protection of parameters by security code. Settings can be saved on a USB stick. Electronic adjustment of the mixing ratio between 0.1:1 and 50:1. Up to 100 work recipes. (Also with robot communication or Profibus.) Possibility of two separate fluid circuits: – for simultaneous operation, – for quick color changes, – or to separate two incompatible 2K materials from each other (e.g., PUR and epoxy paints). Programmable cleaning recipes to save up to 60% of cleaning agents compared to conventional systems. Fully automatic control and monitoring for 1–4 guns. Compatibility with solvent-based and water-based products, as well as selective automatic cleaning with water and/or solvents. Use of manual or automatic atomizers. Djdozb I Spspfx Agrswd Release of automatic spray booth, automatic gun cleaning device, etc. Possibility of robot communication.

Condition: like new (used), SHIPPING AVAILABLE 🚚 Dodpsz D Tkxofx Agrowd - Brand: Graco - Reference: X60DH3 - For general industry, paints, and contractors. - Maximum flow rate: 13.2 l/min (Output per cycle: 220 cc) - Xtreme Pump 60:1, cart-mounted - Maximum working pressure: 420 Bar - For high-viscosity paints, polyurethanes, enamels, etc. - Includes new hose, gun, and nozzle - New XTR7 Graco gun - New 15-meter, 500 Bar hose - New XHD519 Graco nozzle - Used product, fully inspected. - 1-year warranty - Shipping or in-store pickup available - VAT not included

Condition: new, functionality: fully functional, total height: 48 mm, total length: 150 mm, total width: 42 mm, overall weight: 68 kg, Dura-Flo NXT 2-ball piston pump, 15:1, low-noise air motor, CS, 3 PTFE seals / 2 leather seals Product number: P15LCD - 076A Graco's Dura-Flo pumps with NXT technology provide a smooth and easily controlled flow. Ideal for dispensing applications, these durable pumps feature an NXT motor and can now achieve an even higher pressure range without compromising flow rate. - General industry - Application: Painting, Bonding, Sealing, PVC, Grouting, Encapsulation, Molding, Discharging, Filling in case of material shortage Dsdpfxez Snius Agrewd Features The 2-ball piston design and positive displacement provide a smooth and easily controlled flow. Excellent flow and pressure performance to handle a wide range of paints and coatings. Improved service performance with fewer parts, faster repairs, and lower ownership costs. Technical specifications Fluid outlet size (mm) 38.1 Fluid outlet thread gender: Female Includes: Carbon steel pump, low-noise air motor, 3 PTFE seals / 2 leather seals Maximum air inlet pressure (bar) 6.9 Maximum air inlet pressure (kPa) 690 Maximum air inlet pressure (psi) 100 Maximum continuous cycle speed (CPM) 60 Maximum flow rate (L/min) 26.12 Maximum operating temperature (°C) 66 Maximum operating temperature (°F) 150 Maximum working pressure (bar) 109 Maximum working pressure (kPa) 10900 Maximum working pressure (psi) 1580 Model: Dura-Flo Mounting: Wall or stand Not portable Series: 2-Ball Maximum working pressure (MPa) 10.9 VAT not included.

Condition: used, Paint Line with (2) Delta Air Sweep Systems with Extraction, Wash /Degrease /Phosphate Treatment, Dry Off, Primer Booth (Delta Air Sweep), Curing Oven (GAS), Top Coat Spray (Delta Air Sweep) Final Curing Oven (GAS), Year 2013 Dedpj Afpiyefx Agrowd

Condition: new, functionality: fully functional, total height: 74 mm, total length: 63 mm, total width: 51 mm, overall weight: 43 kg, Husky 1590 SS Air-Operated Double Diaphragm Metal Pump, SS/PT Product number DB4311 - 199 The Stainless Steel + PTFE combination offers universal chemical compatibility and allows working with low to medium/high viscosity products: Solvents and Alcohols: Acetone, MEK, toluene, xylene, ethanol, methanol, isopropyl alcohol. Acids and Bases: Nitric acid, phosphoric acid, diluted sulfuric acid, caustic soda, alkaline solutions. Resins and Adhesives: Epoxy resins, polyurethanes, solvent-based or water-based adhesives. Inks and Paints: Industrial paints, enamels, lacquers, flexographic and gravure inks. Sanitary/CIP Chemicals: Concentrated detergents, industrial disinfectants, deionized water. - Chemical and Petrochemical Industry: Processing and transfer of reagents, solvents, acids, and alkalis in the plant. - Pharmaceutical and Cosmeceutical: Loading, mixing, and dispensing of raw materials and finished products. - Food and Beverage (auxiliary processes): Transfer of concentrates, flavorings, additives, and CIP (Clean-in-Place) cleaning that require aggressive chemicals. - Paints, Inks, and Coatings: Handling of resins, cleaning solvents, printing inks, and corrosive enamels. - Water and Industrial Treatment: Dispensing of flocculants, chemical neutralizers, and aggressive waste fluids. Features - Diaphragm life up to 5 times longer compared to other pneumatic diaphragm pumps in its class. - Wide range of materials to suit a multitude of applications. - Fewer parts than the competition; the pneumatic valve is accessible from the outside, allowing for quick and easy maintenance without disassembling the diaphragm pump. - Available in ATEX configuration. - 1-1/2 inch (38.1 mm) ANSI end connections. - High flow rate: 100 gpm (378 lpm) in a compact and portable size. - Fluid pressure up to 120 psi (8.4 bar, 0.84 MPa). - Lubrication-free operation. - Available in polypropylene, aluminum, and stainless steel. - Pneumatic section with epoxy coating for harsh environmental conditions. Technical Specifications Air inlet diameter (inches) 1/2 Fluid outlet thread type: Female Fluid outlet diameter (mm) 38.1 Maximum air consumption (SCFM) 125 Maximum air pressure (bar) 8.27 Fluid inlet thread type Female Fluid inlet diameter (mm) 38.1 Maximum flow rate (L/min) 379 Maximum fluid pressure (bar) 8.27 Fluid inlet size (in.) 37257 Maximum operating temperature (°C) 66 Maximum operating temperature (°F) 150 Maximum solid particle size (cm) 0.4763 Dwodpsz Snr Usfx Agred Maximum solid particle size (in.) 0.1875 Maximum solid particle size (mm) 4763 Husky Model diaphragm_compatible_material PTFE Air inlet thread type Female Maximum air pressure (psi) 120 Maximum cycle frequency (CPM) 200 Maximum fluid pressure (psi) 120 VAT NOT INCLUDED

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. Dwodpexa H Ewsfx Agrjd If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: good (used), Painting unit, paint sprayer – GRACO MERKUR + Graco G40 spray gun. Dwodsz Sb Nnjpfx Agrsd

Condition: used, Year of construction: 2008, Painting System Manufacturer: HEIMER Year of manufacture: 2008 Djdpfx Aozbvlwegrjwd Technical data: - Max. weight per suspension point: 44 kg - Conveyor system (frequency-controlled): 0.6 – 2.0 m/min - Total chain length: approx. 40,500 mm - Pitch: 270 mm In our assessment, the painting system is in good used condition. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: like new (used), functionality: fully functional, machine/vehicle number: MD1001, total height: 150 mm, total length: 45 mm, total width: 52 mm, overall weight: 50 kg, PROMIX 2KS MIXER, 1 COLOR + 1 CATALYST + 1 AIR + SOLVENT SHIPPING AVAILABLE 🚚 -Brand: Graco -Reference: MD1001 -UPC Code: 633955370647 -General Industry: Paints and Glues -Application: Two-component paints, solvent and water, glues, varnishes, lacquers. -Mixing close to the guns for greater control -Compatible with solvent- and water-based epoxies and polyurethanes -Mixing ratio up to 30:1 -Pressure: 275.6 bar (4000 psi) -Pre-owned, fully inspected -Warranty: 1 year Dwedpfx Aowp Slkogrjd -OPTIONAL: COLOR AND CATALYST CHANGE WITH CONTROL (PRICE ON REQUEST)

Condition: used, Year of construction: 2007, functionality: fully functional, total height: 2,900 mm, total length: 1,100 mm, total width: 3,150 mm, working width: 3,000 mm, Manufacturer: Heimer Model: TSW-R 22-22 Year of manufacture: 2007 General / technical data: Used spray booth with dry filter technology (TSW). The spray booth has a modular design and can be connected to an exhaust unit. The filter mats above the paint booth absorb the particles during the painting process within their structure. Due to the modular design, the filter mats can be easily replaced. Dodpfx Aszlrrmsgrowd Dimensions (h x w x d): 2900 mm x 3150 mm x 1100 mm

Condition: used, Year of construction: 2008, functionality: fully functional, Technical specifications: Washing booth: Manufacturer: Hege Year of construction: 2017 Washing equipment: Steam cleaner, electrically heated Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 8000 x 5000 x 3000 mm Preparation room Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 5140 x 4120 x 3000 mm Painting booth Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air / Recirculation mode possible Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Dwsdezdc D Sepfx Agrjd Drying 1 Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Recirculation mode Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 2 Manufacturer: Hege Year of construction: 2017 Ventilation: Recirculation mode Heating: Pumped hot water Dimensions: (l x w x h) 5840 x 4120 x 3000 mm Lift and lower station Manufacturer: Hege Year of construction: 2017 Lifting capacity: 980 kg Manual push conveyor: Year of construction: 2008 / Extension 2017 Load capacity: 400 kg/m Operating mode: manual

Condition: used, The painting line consists of the following elements: 1) MTL.120 monorail, 600 kg load capacity, equipped with hooks and rotation drive 2) Dry spray booth for painting 3) Dust extraction booth 4) Ducted solvent extraction system 5) Ducted paint oven system 6) Reciprocator for electrostatic spray guns 7) Wagner 30:1 high-pressure pump for solvent-based electrostatic installation 8) Protective enclosure for low-pressure ASAI system Dodpfx Agjyy Rivsrjwd 9) Flow coating system 10) Low-pressure pump for ASAI electrostatic installation

Condition: new, functionality: fully functional, machine/vehicle number: G30C25, overall weight: 33 kg, operating pressure: 207 bar, compressed air connection: 7 bar, Air-assisted 30:1 Merkur complete system: - Incl. Airmix spray gun PerformAA 50 - Chassis mounting - Incl. spray gun air-material hose, material filter - Permissible material operating pressure: 207 bar - Max. air inlet pressure: 7 bar - Max. material flow rate: 1.5 l/min. Graco spray guns in our clearance sale: We need space and are therefore offering this and other selected Graco Merkur pumps at particularly attractive clearance prices. If you are interested, we will be happy to assist you. Dodpfx Aozv S T Ejgrewd Sales notes: Sales exclusively to business customers. No sales to private customers. Sales and delivery exclusively within the EU – no sales to third countries. Delivery conditions and shipping costs based on individual effort and agreement. The sale is made with the exclusion of any warranty. Are you looking for other machines or similar products? Please do not hesitate to contact us. At Oltrogge, we regularly have a wide range of new and used machines as well as other products from our technical product range available. We will gladly check if we can offer you a suitable alternative.

Condition: new, functionality: fully functional, machine/vehicle number: G36W05, overall weight: 39 kg, operating pressure: 248 bar, compressed air connection: 7 bar, 36:1-Mercury Pump: - Wall-mounted Dsdpfjzwb Nrsx Agrswd - Includes suction hose, material filter - Permissible material operating pressure: 248 bar - Max. material flow rate: 6 l/min. Graco spray guns in our clearance sale: We need space and are therefore offering this and other selected Graco Mercury pumps at particularly attractive clearance prices. If you are interested, we will be happy to assist you. Notes on the sale: Sale exclusively to business customers. No sale to private customers. Sale and delivery exclusively within the EU – no sale to third countries. Delivery conditions and shipping costs will be determined individually based on effort and agreement. The sale is made with the exclusion of any warranty. Are you looking for other machines or similar products? Please feel free to contact us. At Oltrogge, we regularly have a wide range of new and used machines as well as other products from our technical range available. We will be happy to check if we can offer you a suitable alternative.