Condition: good (used), Airless sprayer, painting device, spray pack, paint sprayer, paint spray system, paint pump, electrostatic sprayer, airless complete system, pneumatic piston pumps, airless high-pressure pump, air motor, AIR MOTOR -Manufacturer: Wagner, Airless sprayer type: 33-70 with transport trolley and spray gun -Material flow: max. 12.6 l/min -Air inlet pressure: max. 8 bar, operating pressure max. 264 bar -Individual components: see photos -Dimensions: 830/680/H1140 mm -Weight: 50 kg Dcedpfx Agew U T Atszjd

Condition: excellent (used), Here we offer a used Datona mobile sandblasting unit. Datona mobile sandblasting unit DUO - 74 liters SKU DT-55212 Advantages and disadvantages: 2.5 m long hose for a long reach Easy to switch between blasting agents thanks to the mixing valve When using soda, the surface of the workpiece is not damaged Description: This mobile sandblasting machine is used for removing paint and rust. Thanks to the two boilers, you can choose from two different blasting media. The mobile sandblasting unit works with a pressure of 4 to 8 bar and requires a compressor with a suction capacity of at least 350 l/min. Double boiler: If blasting with soda or calcium carbonate does not achieve the desired result, simply try a different blasting agent. For a more effective effect, it is also possible to use both blasting agents at the same time. With the sandblaster, you have a practical machine in your home. With the help of the special mixing valve, you can use soda to easily and gently remove paint from steel, stainless steel, chrome, aluminum or polyester. A major advantage of blasting with fine soda is that the surface of the object to be of the object to be blasted is not damaged. You don't even have to remove rubber seals, chrome parts or glass. This saves a lot of time! The mobile sandblasting unit can be used both in the workshop as well as on site. Attention: The one boiler is only suitable for soda and calcium carbonate!!! ✓ Duo sandblasting unit ✓ 74 liter boiler capacity ✓ Air consumption is around 350 l/min Technical data: SKU DT-55212 Dcjdpfjqcuvwox Agzed Weight 33 kg Suitable blasting material Aluminum silicate Dato-Blast calcium carbonate soda Blasting cabinet connection 1/4" Max. Pressure 2 - 6 bar Minimum air consumption 350 l/min Min. compressor tank capacity 100 liters Type: DT-55212 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2018, condition: excellent (used), EFD Type: MINAC 6/10 SM Heat treatment The compact design of the Minac induction heating system allows for easy installation and offers fast, concentrated and controlled heating with full repeatability. Dsdjt Din Ajpfx Agzjcd repeatability. Medium frequency product line Technical data: Maximum output power 10 kW Continuous output power 6 kW Mains voltage 400-480 V Frequency range 10-25 kHz Control range of output power 2-100% Recommended back-up fuse 16 A Cooling water approx. 4 l/min Cooling water flow temperature min./max. 18 - 35°C Cooling water pressure min./max. 4 - 6 bar Weight approx. 50 kg Dimensions (WxDxH): 345 x 708 x 453 mm Year of construction: 2018 optris CTlaser infrared thermometer Abbreviation: 3ML Measuring range: 50 to 400 °C Spectral sensitivity: 2.3µm Typical application: Metals at low object temperatures (from 50°C) Temperature control ECU 1214C Hyfra eChilly water cooler 4-S Cooling capacity 4395W The device comes from the laboratory sector. Only a few operating hours. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2001, condition: good (used), 1 used hardening furnace Manufacturer: Nabertherm, Type N 321 Serial Number: 160897, Year of manufacture: 2001, Max. temperature: 1,200°C, Connected load: 400V, 47 kW Internal dimensions: 750 x 1100 x 400 mm Usable volume: 320 liters Dcjdpfx Asxpf I Nsgzod Weight: approx. 1.6 t Dimensions: Length approx. 2 m, width approx. 1.5 m, height approx. 2 m,

Year of construction: 2012, condition: used, Technical details: total power requirement: 413 kW Induction hardening machine Rotary table Eldec: Z (servo drive 750 mm Dsdpsw Dufvofx Agzecd Y (electromechanical) 300 mm X (electromechanical) 200 mm Maximum part diameter 600 mm Maximum workpiece weight 500 kg High frequency generator type HFG 200 Medium frequency generator type MFG 30 *

Condition: good (used), Tumble rubber belt blast machine Max. batch volume: 800 L Max. batch weight: 2000 kg Max. component weight: 150 kg Compartment diameter: 1350 mm Compartment width: 1350 mm Nr. Of turbines: 2 Dcedpfslf Hq Nsx Agzod Power of turbine: 11 kW Max. turbine flow: kg/min Cleaner type: air Foundation: no Housing protection: Mn Req. air flow: yes Total width of machine: mm Total height of machine: mm Total length of machine: mm

Condition: good (used), Year of construction: 2000, Tray trolley, paint drying trolley -Total length: 1400 mm -Total depth: 960 mm -Total height: 2000 mm -Compartment height: 28 mm -Shelf load capacity: max. 15 kg -Number: 2 cars available Dsdpfxob A Hcmj Agzscd -Price: per piece -Weight: 127 kg/piece

Condition: good (used), Paint roller machine, roller coating machine, powder coating system Dsdjgal Agepfx Agzscd -Drying and exhaust air: used for slat/blind production -Dimensions: 2950/800/H1920 mm -Weight: 484 kg

Year of construction: 2006, condition: excellent (used), Manufacturer: FORNAX AS Drying oven, curring oven chanel, chamber with fans. Working Temperature: 130 ° C. Year of manufacture: 2006 Size: Length: 6,2 m Width: 2,5 m 2 chamber, Open size: 90 x 190 cm Heating capacity: 110 kW Dcodpfx Agofkvr Hjzsd 72 Heating elements

Year of construction: 2020, condition: good (used), Pad printing machine, screen printing machine, rotary printing machine, pad printer -Manufacturer: Eickmeyer, screen printing machine, pad printing machine -Type: TIC 121 SC -Voltage: 230 V -Table size: 180 x 100 mm -Protrusion: 165 mm Dsdpfxex Ei Tws Agzscd -Operation: with foot pedal -Number: 2x pad printing machines available -Price: per piece -Transport dimensions: 670/400/H530 mm -Weight: 50 kg/piece

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, total length: 2,500 mm, suction capacity: 7,200 m³/h, intake manifold diameter: 500 mm, Placing a bid obligates you to collect the item within the specified period until 27/02/2026! MACHINE DETAILS Voltage: 230 V EQUIPMENT - Robust construction - Easy and hassle-free spindle head change - Pneumatic two-hand operation - 6-spindle drilling head - Useful special accessories for extended processing options TECHNICAL DETAILS Djdsyfnqtspfx Agzecd Exhaust duct diameter: 500 mm Extraction capacity: 7,200 m³/h MACHINE DETAILS Noise level: approx. 78 dB(A) Motor power: 1.5 kW ex External dimensions (L x W x H): 2,500 x 2,000 x 750 mm Height with fan: 2,700 mm EQUIPMENT - Housing made from galvanized sheet steel - Soundproofing with perforated pre-panel - Folding carton filter with fiberglass filter at the second filter stage - Front panel with high-performance filters - Wall duct NW 500 L = 500 mm round sheet metal plate - Wall outlet 45° with grid - Push-fit connector for hose or pipe NW 500

Condition: used, Year of construction: 2017, Technical details: operating pressure: 12 bar container volume: 200 l Total weight, approx.: 220 kg dimensions L x W x H: 1,2 x 1,1 x 1,8 m Mobile pressure blasting pot - Sand blasting system Blasting tank pressure up to 12 bar Test pressure 17.2 bar Ideally equipped with: Djdpfx Agevvvrpezscd -with remote control valve -with remote control lever -with electro-pneumatic remote control -with carbide spray nozzle incl. 10 m nozzle hose i.D. *

Condition: good (used), Year of construction: 2013, Low carbon steel shot LC S-110, size: 0.3 mm Min. workpiece size: 50x80 mm Max. workpiece size: 600x400 mm Dedpoyhbkfefx Agzecd Number of spray nozzles: 4 pcs Spray wheel diameter: 380 mm Grain flow rate: 60-120 kg/min/nozzle Spray material loading: 1500 kg Spray material to be used max. HRC 51 Grain size 0.2–1.4 mm, max. carbon content 0.7%

Condition: good (used), Year of construction: 2016, total height: 2,640 mm, total length: 3,300 mm, total width: 3,960 mm, volume flow: 8 m³/h, Equipment: cabin, Technical Details: 75 m³ area including paint booth, drying booth, and paint storage room. Paint booth: - Internal dimensions: 3300 x 3960 x 2640 mm - Floor area: 13.1 m² - Internal volume: 34.5 m³ - Heating method: air intake from the air-conditioned area - Air supply: 8,000 m³/h Dcsdpfoyhbggjx Agzed Drying booth: - Internal dimensions: 3300 x 3960 x 2640 mm - Floor area: 13.1 m² - Internal volume: 34.5 m³ - Heating method: electric heating cartridges, 22 kW, 3x400V - Air supply: 2,500 m³/h Paint storage room: - Internal dimensions: 3100 x 2000 x 2600 mm - Heating method: air intake from the air-conditioned area - Floor area: 6.2 m²

Condition: good (used), Year of construction: 2013, Central control WAGNER automatic powder coating booth (for pre-treated parts), incl. WAGNER SuperCenter powder supply unit (2013) Manual powder coating system (small batches, mixed colors) with spray guns Cyclone separator Block gas-heated water drying oven. Drying and baking oven (incl. boiler) The powder-coated workpieces are cured in a natural gas-heated powder curing oven Cooling after water drying Cooling after powder curing Dcedoyhbdfjpfx Agzsd Handling system Automatic wastewater treatment capacity: max.: ~ 1 m³/h

Condition: new, Year of construction: 2026, warranty duration: 12 months, total width: 2,100 mm, total length: 1,500 mm, total height: 2,400 mm, 🇬🇧 WHEEL PAINT STRIPPING TANK — TOP SALES | ULTRA PREMIUM BUMEX Sp. z o.o. — Industrial Chemical Stripping Technology Professional industrial stripping tank designed for intensive chemical removal of powder coatings, industrial paints and solvent-based coatings from aluminium and steel wheels as well as various metal components. Engineered for maximum process efficiency, operational safety and long-term continuous industrial use. Technical Data Working basket dimensions: 1200 × 1200 × 700 mm (simultaneous processing of up to 8 wheels). Chemical capacity: approx. 1200 litres. Construction materials: Djdpfx Agefmf Izszjcd process tank — acid-resistant stainless steel AISI 304, external housing — stainless steel. Thermal insulation: fully insulated tank — 50 mm (high temperature stability and reduced energy loss). Standard Equipment ✅ indirect heating system via oil heating jacket for uniform temperature distribution, ✅ automatic heating medium temperature control, ✅ ceramic heating elements in acid-resistant protection tubes — 4 × 3.5 kW (14 kW), ✅ mixing system supporting uniform chemical circulation throughout the tank, ✅ fully stainless steel process basket, ✅ heavy-duty loading frame for safe lifting and lowering of the load, ✅ industrial control panel with LED status indicators and safety protection systems, ✅ fully enclosed stainless steel construction resistant to aggressive chemical environments. Key Advantages ✔ uniform heating of the entire chemical volume — no local overheating, ✔ high process efficiency with optimised energy consumption, ✔ designed for continuous industrial operation, ✔ excellent chemical and thermal resistance, ✔ ergonomic loading of wheels and large components. BUMEX Quality Standard CE conformity, full technical documentation, manufacturer warranty — 12 months, warranty and after-sales service, professional technical consulting. Commercial Terms ✔ short delivery times, ✔ customised configurations and dimensions available, ✔ own transport — individually priced, ✔ VAT invoice provided. BUMEX Sp. z o.o. — Industrial solutions engineered for reliability, safety and long-term performance.

Condition: used, Year of construction: 2017, Blast Cabinet with Extraction System Blast Cabinet: Manufacturer: SGT Strahlmaschinen AG Model: SX-100 / DK / 4P Djdpfxeyddufs Agzocd Extraction System: Manufacturer: Gläsner Plant No.: 5V 3028 055 Voltage: 400 V Frequency: 50 Hz Power: 2.2 kW The blast cabinet is sold together with the extraction system. Purchasing individual components separately is not possible. Inspection is available by appointment.

Condition: good (used), Year of construction: 2000, Sandblasting Cabinet Auer ST 700 Dedpfx Asyayu Hegzecd Blasting Chamber Width 750 mm Height 700 mm Depth 550 mm Blasting Gun Air Nozzle 3.0 mm Blast Nozzle 6.5 mm CONSUMPTION Compressed Air (4 bar) 0.41 m3/min Power 1.0 kW

Year of construction: 1997, condition: used, functionality: fully functional, High vacuum vapor deposition system with thick film device The vapor deposition system was used to coat lamp reflectors Dcodpfx Ajvu Aunjgzed System consisting of: - Vacuum chamber with support frame, evaporator - Pump stand - Control cabinet - Glow device with 5kV glow voltage - Incl. 2x rotating basket 940x1370 mm with charging trolley - Suction capacity of rotary vane pump: 200 qm/h - Suction capacity of Roots pump: 2500 qm/h - Suction capacity of oil diff. pump: 8000 l/s - Internal dimensions of chamber: øxl 1050x1370 mm Connection value: 40 kVA Dismantling and removal is the responsibility of the buyer.

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: 9884, overall weight: 500 kg, inner dimension width: 800 mm, inner dimension length: 1,150 mm, inner dimension height: 800 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to business closure. Placing a bid requires timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Internal dimensions: 1,150 x 800 x 800 mm MACHINE DETAILS Electrical data Power: 850 W Voltage: 230 V Frequency: 50 Hz Maximum air connection: 80 bar Dedpfexqnwpsx Agzecd Dimensions & weight Dimensions (L x W x H): 1,300 x 1,200 x 1,800 mm Weight: 500 kg

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. Djdexa H Ewjpfx Agzscd (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: Dcjdpfowzmcbjx Agzsd • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. Dsdpfxewzl Hxe Agzocd * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperature: 230 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, inner dimension width: 1,505 mm, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - ✔️ Internal dimensions: 2500 mm L * 1505 mm W * 1800 mm H ✔️ Electric heating output: 30 kW/h ✔️ Fan: 3000 m3/h 80 mm SS ✔️ Circulation fan output: 1.5 kW/h ✔️ Total 35 kW/h +- 10% ✔️ Digital heat control, continuously adjustable temperature up to 220°C Dcsdpewfgbrefx Agzsd ✔️ Sandwich panels inside: 1.5 mm galvanized steel, outside: 1.5 mm powder-coated Steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150 mm (150 mm rock wool) 🔥 PEF-2.5 Curing Oven: Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastic processing, or other thermal processes – the powder curing oven is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Optionally with insert shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control temperature progression and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: used, Year of construction: 2003, functionality: fully functional, total height: 4,000 mm, total length: 7,100 mm, total width: 8,100 mm, temperature: 80 °C, heating capacity: 116 kW (157.72 HP), Equipment: cabin, Complete wet paint installation with prep area, wet paint booth, mixing room, drying oven, and finishing zone. The installation can still be inspected in Diest. More details in the attachment or upon request. - Dimensions: LxWxH = 8,100 x 7,100 x 4,000 mm (external) and 8,000 x 7,000 x 3,950 mm (internal). - Height to underside of rail = 3,740 mm measured from floor level. Dodpjx H Rhrofx Agzecd - With a shared sliding door with the spray booth. - Sliding doors as oven exit door: WxH = 1,200 x 3,800 mm, equipped with 1 window, 2 panels. - Emergency door with window in side wall: WxH = 800 x 1,900 mm, self-closing with door closer and latch. The emergency door is fitted with sealing rubbers, large in diameter and highly elastic EPDM quality. - Wall type: vertical double-walled sandwich panels filled with mineral wool, thickness 55 mm. Includes lighting, ventilation unit, control panel, and a complete monorail system in front of and throughout the installation up to the finishing zone.