Used window spraying plants for sale (5)

Condition: used, Year of construction: 2015, Length 12000 mm Width 9000 mm Used manual overhead conveyor system with a SCHUKO paint mist extraction unit and a warm-air supply system. Includes a cross-flow heat exchanger (heat recovery) and a manual overhead conveyor; in very good, well-maintained condition. Manufactured 2015–2016. ----- Sold on behalf of a client! The system is still in operation and available for inspection. Price is ex-site; dismantling to be performed by the buyer ((Scissor lift and forklift available on-site)). Group 1: Dry-type paint mist extraction system, model FARBMEISTER: ----- Model FARBMEISTER-25/30, including a stationary paint mist extraction wall with dry-type filtration. Baffle/filter area: H x W 2,790 x 3,140 mm (cardboard filter cells). Features a centrally positioned, solid baffle panel designed to reduce the maximum required airflow, tailored to the specific frames and casements being painted. Includes an additional pull-down pre-filter. This reduces the effective extraction area—and consequently the total airflow—from a standard ~14,000 m³/h to the required 10,500 m³/h. Also includes a 250 mm deep extension around the perimeter (left, right, and top) to improve the capture of overspray. A high-performance centrifugal fan (model L-EX 500) with a 5.0 kW motor, capable of an exhaust air volume of 10,500 m³/h (free-blowing), including all necessary ductwork and components to construct and install the extraction system—extending through the wall to the outside—as well as a manually adjustable exhaust air damper. Group 2: Warm Air/Supply Air System for the Spray Booth: ----- Fedpe Ahkkhefx Agxegi BB 1,100 warm air/supply air system for the spray booth, including a supply air unit (model WZL110-com) equipped with an integrated heating coil (hot water connection, supply temperature +80°C). The unit has an air capacity of 10,500 m³/h and a 5.0 kW motor. The required heating capacity, based on a temperature differential (Delta-T) from -15°C to +22°C, is 137 kW. The system features an automatic louver damper at the air intake to seal off the ductwork and prevent cold air from entering when the system is not in operation. It also includes an explosion-proof warm-air thermostat designed to shut down the system in the event of a loss of heating capacity (hot water supply). This group encompasses all ductwork and supply air components, spanning from the external air intake to the air outlets in the distribution ceiling located above the spray wall. A cross-flow plate heat exchanger for heat recovery from the exhaust air duct leading outdoors, while simultaneously preheating the fresh air drawn in from outside. With an exhaust air temperature of +20°C and a fresh air temperature of -12°C, this results in an energy saving of approximately 58 kW of heating capacity. Includes all necessary duct and pipe components for integrating the exhaust and supply air lines with the plate heat exchanger, in accordance with the attached planning drawing. Also includes a maintenance/repair switch and a differential pressure monitor for supervising the intake filter. Please note that the heat exchanger core must remain easily accessible for routine maintenance and cleaning. Group 3: Electrical System Control for Paint Mist Extraction: ----- Electrical system control for paint mist extraction...

Condition: like new (used), Year of construction: 2022, functionality: fully functional, complete plat concisting of: Bi-rail overhanging conveyor with two points bar support , lift and rotation unit Spray booth for robot with full recirculation, with autimatic pre-filter replacment system High pressure humidificer for spray booth and flash off room Robotic spray system for windows with jacket nozzle cleaning unit automatic color change (3 independent ) electrostatic safty system paint flow meter drying tunnel with ldp system and axial fans supervisor systeem with data interface and datamic reader Fodpfx Agoxw Ux Hoxsgi “The line is packed for transport. It has been previously installed, but it has never been taken into operation.”

Condition: excellent (used), Year of construction: 2019, VIDALI painting system Spray booth with overhead conveyor in very good condition Fgedpfx Aezx Rxxjgxoi More pictures available upon request.

Condition: used, Year of construction: 2011, Length 5000 mm Width 100 mm Height 2800 mm Year 2011 0 Range + Heine Conveyor Technology with Reiter electrostatic airless spray technology. Fully automatic industrial painting and coating line for wooden windows, window frames, doors, and wooden elements for sale on behalf of a client. Viewing available. ----- ----- Technical Manufacturer’s Description (Summary): Item 1 Conveyor System: Power + Free circular conveyor, frequency-controlled drives, buffers, stop stations, crossbeams, steel structure according to layout. Item 2: Flood Coating System: flowcomat II-P for priming/pretreatment. Item 3: Spraying Technology: Reiter MAE 7-059 electrostatic airless spray systems with automatic spray nozzles. Item 4: Lifting Technology: Fjdey Ty E Hspfx Agxjgi MH2T mechanical lifting devices, lifting range approx. 3,200 mm. Item 5 Material Supply: High-pressure paint supply, insulated material supply, paint changeover, ring line, flushing agent supply. Item 6 Control System: Siemens S7-300 for conveyor technology as well as Reiter control system with workpiece recognition and high-voltage power supply. Item 7 Documentation (available separately): Range + Heine order confirmation, layout plan, Reiter order confirmation, and technical descriptions available. ----- Key Technical Specifications: Workpieces: Wooden windows, window frames, doors Workpiece length: up to approx. 5,000 mm Workpiece height: up to approx. 2,800 mm Capacity: approx. 60 window units per shift Coating systems: water-based systems / low-VOC Control system: Siemens S7-300 Electrostatic: 100 kV / 1 mA ----- ----- Price of the above machine available upon request! ----- Price is ex-location. Dismantling, decommissioning, packaging, loading, and all transportation etc. are the sole responsibility of the customer and are not included in the sale or provided by the seller. Further technical data and information in the attached PDF! ----- (Technical specifications according to the manufacturer—not guaranteed!) All prices listed are net, plus applicable VAT.

Condition: new, Finiture Paint Line for Windows and Doors ----- Short description: Item 1: 1x Double-rail overhead conveyor Item 2: 1x Traverse rotation unit with one coupling Item 3: 1x "Superjet" flood coating system Item 4: 1x High-pressure humidifier Item 5: 1x Wastewater separation system Optional: Flood channel or dipping tank (5–6 basins) For detailed technical description and layout, please see the PDF attachment! ----- Price of the above-mentioned paint line on request! ----- (Technical specifications according to manufacturer – no guarantee!) All prices are net plus statutory VAT. Fgjdpfx Agjy D A Hhsxoi