Used Painting for sale (3,833)

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 Djdpfsfz U Nbox Af Uski ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ Dksdeflk Awspfx Af Uji 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. Djdpfxsfz U Tis Af Uski With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Condition: good (used), Paint mist extraction DIT-FNA 20/18 - with upper and side guide plates Dkedpfx Ajyrnyhef Uoi - 2.7 kW - 380 Volt

Condition: like new (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, Automatic door painting line comprising: Automatic door destacker, door by door Automatic painting robot with spraying Door stacker onto trolleys Door dimensions: lengths from 2000 to 2600 mm widths from 730 to 1030 mm Dksdpfx Aeyrr Dkef Usi

Condition: used, Year of construction: 2018, functionality: fully functional, Punching machine, barely used, weight: 8500 kg. Lot includes steel cabinet with contents. Contents consist of tooling, spares and miscellaneous small parts. Dsdsxzpvuepfx Af Uoki

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime Dkedpfxou T Hrpo Af Uei - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: used, Year of construction: 2009, - Details: - └ Description: Exclusive Makor - Year: 2009 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: MKR30029343 - Rail present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dkedpfx Afewnh I Es Uji Yorick Diebels

Condition: used, Year of construction: 2016, Used Makor START ONE spray coating machine suitable for low-volume woodworking production. Designed for applying water-based or solvent-based paints and glues to veneered components and PVC panels. Ideal for companies moving from manual finishing to automatic spray coating. Equipped with PLC control system with intuitive interface and automatic panel detection to optimise paint usage. Features a self-cleaning paper transport system, reducing maintenance and downtime. Spraying unit includes an electronically controlled oscillating arm with capacity for up to 4 spray guns, 2 high-pressure feed circuits, and quick-change coupling system. Efficient air-flow and filtration system ensures clean operation and environmental compliance. Technical Data: • Feed speed: 1–4.5 m/min • Air capacity: 10,000 m³/h Dodpfxjx Iggyo Af Ueki • Installed power: 7 kW • Working height: approx. 900 mm

Condition: used, Trolley 12 levels - year of construction unknown - min. part length 320 mm - max. part height approx. 90 mm Dkjdpfx Afjwbtvuo Uji - number of levels 12 pcs. - distance between levels 100 mm - insertion depth of levels 650 mm - Upright stands 300-450-450-300mm, 5 pcs. - Total height 1.740 mm - Total width 1.540 mm

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm Dkedpfx Afou Afu Re Usi 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: used, Paint mist extraction, water irrigated system - Producer Reinox - Type WW 25/22 - Width 2.600 mm - Height 1.700 mm (2.250) mm - Depth 1.640 mm - Required space 2,75 x 2.45x1,65m mm - With irrigated exhaust system - With water circulating pump Djdsumvtqjpfx Af Uski - Motor power 4,2 kW - Exhaust pipe 2 x 350 mm - With switch cabinet - In stainless steel - Voltage / HZ 400 / 500 - Location on stock - Voltage fluctuation max. +/- 5 %

Year of construction: 2026, condition: used, functionality: fully functional, Passenger Car Paint and Drying Booth DURST / CMC Concord – 26,000 m³/h – modernized – ready for operation Manufacturer: CMC / DURST Paint Systems Model: Concord Cabin year of manufacture: 1998 Modernization: 2016 For sale is a professional passenger car paint and drying booth from our bodywork and paint workshop. The unit is still in daily use and can be fully tested on-site. The sale is solely due to a new investment in modern paint systems. Technical Data Internal cabin dimensions: Length: approx. 7,000 mm Width: approx. 4,000 mm Height: approx. 3,000 mm External dimensions: Length: approx. 7,100 mm Width: approx. 4,100 mm Height: approx. 3,800 mm Airflow Capacity Supply air: 26,000 m³/h Exhaust air: 26,000 m³/h Air changes: approx. 310 air changes per hour Fans: Radial fans Motor output: 7.5 kW each Heating system: Gas surface burner Heating output: approx. 260–300 kW Maximum drying temperature: 80°C Fuel Originally natural gas Currently converted to LPG (liquefied petroleum gas) Electrical Data Connected load: approx. 20 kW 400 V / 50 Hz Equipment Spray and drying mode Automatic switch-over between spraying / drying Frequency converter for fans Temperature control 0–100°C Ceiling filter pressure monitoring Dodpfoyrxy Ssx Af Ueki Ceiling filter system Floor grid extraction Automatic run-on timer Operating hours counter Burner safety shut-off Explosion-proof emergency button Control cabinet with digital display Complete supply and exhaust units Fresh air and exhaust air ducts Condition Unit is fully functional Still in operation Inspection and functional test possible at any time Delivery / Dismantling Unit can be inspected by arrangement Dismantling and transport by purchaser Forklift assistance can be provided if required Location Germany 35582 Wetzlar

Condition: used, Paint mist extraction system, approx. width 1200 mm, height 2200 mm, extraction motor mounted on top Dkedeyl Ippjpfx Af Usi

Condition: ready for operation (used), Fully Equipped Water-Based Paint Factory Djdpfx Afjyknlus Uski Sale or lease of the entire site or individual plant components - Over 50 mixing and stirring tanks (stainless steel) - 5 horizontal ball mills (including Netzsch ZWM 88) for fine dispersion - Extensive dispersing, dissolver, and transfer systems - Tank farm with tanker and container unloading - Filling lines for small and large containers - High-bay warehouse with approx. 2,300 pallet spaces - Container cleaning system - Laboratory, workshop, office, and social areas - Complete utilities, cooling, ventilation, and safety technology (EX design) The existing infrastructure allows for flexible utilization – from immediate production start-up and capacity expansion to project-based or temporary usage concepts. This makes the site attractive for both strategic buyers and lessees/tenants. Further details, technical specifications, and layout plans available on request.

Condition: used, machine/vehicle number: 008047, Position 1: Brushing Machines SCM-BRAVOROBOT P1 Position 2: spraying machine SCM-BRAVOROBOT P1 Dodsw Idbyjpfx Af Ujki Position 3: Roller Conveyors SCM-BRAVOROBOT P1 Position 4: Compressed Air Dryers SCM-BRAVOROBOT P1 Position 5: Ovens SCM-BRAVOROBOT P1

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, working width: 1,300 mm, working height: 110 mm, TECHNICAL DETAILS Max. working width: 1,300 mm Max. working height: 110 mm Min. working height: 8 mm EQUIPMENT Motorised feed rollers 2 brush units The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. Dksdpfx Asyqynuof Uji External reference: 7615

Condition: used, !!! Attention: Only the conveyor system is offered here !!! Available for sale is a floor conveyor system for a wheel rim coating line. The system consists of the following components: - Conveyor chain - Conveyor rails (curved and straight rails) - Carriages with mounts for automotive rims - Rotating rail: the rim rotates on this rail during the coating process to ensure even paint application Total length approximately 150 meters Maximum part size: 550 mm diameter Maximum part height: 400 mm The system is suitable for both wet paint and powder coating processes. Dodpfx Asyrffhef Uoki No control unit is included with the system. The system has been dismantled and packed in crates. Inspection is possible by appointment. The system must be serviced before being put into operation. Two additional systems are also available. These are suitable for baking/curing in an oven.

Year of construction: 2016, condition: excellent (used), - (dust-free operation, paint overspray collection system, stable spraying temperature, elevated drying temperature) Control box including advanced safety functions and operator-friendly software- (weather condition independent operation, elevated temperature in the drying phase)- (daylight-grade illumination, fire safety, efficient ventilation rendering operator's individual respiratory protection equipment redundant)- Low operation cost : (reduced operating costs owing recirculation of warm air in the drying phase)- (efficient dust collection, low solvent vapor concentration, low air pollutant emission)- Limited operating area requirement : (minimized production area) Length:16000mm Dkodpeygu Smjfx Af Uoi Width:6000mm Height:6000mm

Year of construction: 2016, condition: excellent (used), Painting booth Diana serie with horizontal ventilation Modern technology: Dust free operation paint overspray collection system Stable spraying temprature Control box with safety function Djdpfxjygum Rs Af Uski Length:16000mm Width:6000mm Height:6000mm

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Storage location: Garbsen Dsdpfx Aevvizksf Uski

Condition: good (used), Year of construction: 2023, This paint booth is being sold on behalf of a customer and can be inspected under power. Dkedpfxoylm U Ro Af Uji

Year of construction: 2022, condition: like new (used), Immediately available, as new condition, 12-month warranty - For solvent-based substances according to DIN EN 1539 - Max temperature 150°C (can be increased upon request) - Useful volume 1,875 liters - Internal dimensions: W 1250 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Rails for loading the oven - Maximum allowable quantity of combustible materials at 150°C: 83.9 g - Minimum exhaust air flow rate at 20°C: 360 m³/h - KS 40-1 controller for simple temperature control with predefined ramp or hold times (1 program, 4 segments); the controller also offers features such as self-optimization and up to 3 process outputs - Additionally, a simple timer is integrated and can be started via the front buttons - Connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz Dedpfx Afjxbtvfs Uoki - Heating power: 36 kW - Net weight: 820 kg - Charging trolley with 12 trays and 24 stainless steel shelf levels available separately; 4 units on offer - Documentation, CE declaration Viewing by appointment in our warehouse. Oven, drying oven, firing furnace, heating oven, heat cabinet, industrial oven, solvent oven, tempering oven, warming oven, tempering chamber, drying cabinet, chamber kiln, curing oven, recirculating air drying cabinet, recirculating air oven, paint dryer

Condition: used, Spray Booth / Drying Booth ARYA PONY L7000 / L6000 – fully functional For sale are used spray and drying booths from the manufacturer ARYA Oto Servis Ekipmanları, model PONY, year of manufacture 2008. The units come from an operational environment and are fully functional. Technical specifications (depending on the booth): Internal dimensions: approx. 6000 × 4000 × 3050 mm (another booth approx. 6000 × 3070 × 2650 mm) Airflow capacity: 18,000 – 24,000 m³/h Motor power: Supply and exhaust fans each 5.5 kW to 7.5 kW Total power consumption: approx. 8 – 17 kW Burner heating output: approx. 200,000 kcal/h Temperature range: Spraying: approx. 20 °C Drying: up to 60 °C Connection: Dedpfeyniurex Af Uski 400 V / 3~ / 50 Hz Lighting 230 V Thermostat: 20–60 °C CE / TSEK certified Condition: used, age-appropriate technically sound ideal for automotive painting, smart repair, industry, or workshop use Other details: Inspection possible by arrangement Dismantling and transport to be carried out by the buyer Sale without warranty, private/business sale 📍 Location: Wörrstadt 💶 Price: negotiable If interested or if you have any questions, please get in touch.

Condition: used, functionality: fully functional, Painting line/spray hook conveyor with 19 hooks, continuous loop, consisting of 2 rails of 5000 mm each, 2 rails of 800 mm each, with 4 bends. Available at the beginning of August. Djdpjw Eb Rhefx Af Ueki