Condition: new, Dimensions with base frame: approx. 1500 mm x 1400 mm Feed speed: 27 m/min Rotor blades: 2 Stator blades: 1 Infeed cross-section: approx. 10 x 40 mm Drive motor: 1.5 kW Weight with base frame = approx. 270 kg Godpfjyr Tu Rjx Ahneud

Condition: used, machine/vehicle number: 13187, Rotor diameter: 400 mm Rotor width: 1100 mm Rotor blades: 54 Stator blade rows: 1 Inlet cross-section approx. 1100 x 1500 mm Drive motor: 37 kW Gujdpeyr Tudjfx Ahnod

Condition: used, machine/vehicle number: 13063, Rotor diameter: 350 mm Rotor width: 1200 mm Rotor blade: 66 Stator knives: 1 row Inlet cross-section approx. 1100 x 1200 Gsdsyr Tttopfx Ahnjud Drive motor: 55 kW

Condition: new, machine/vehicle number: 12007, Technical data: Guodpfjyr Tpuox Ahned Cutting area: 700 x 1300 mm Number of cutting discs: 18 Cutting disc width: 65 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2900 kg

Condition: new, The AMIS twin-shaft shredder is equipped with a CNC-manufactured, heavy-duty grinding chamber that is fully bolted for easy maintenance. Both the machine housing and the bearings are protected by wear rings and plates. The geared motors drive the two hexagonal working shafts, which can be fitted with various interchangeable cutting discs. The two working shafts are mounted in large-sized SKF spherical roller bearings with lifetime lubrication. Optionally, an automatic, battery-powered continuous lubrication system for the main bearings can be installed. Special features The change of wear plates and scrapers does not require disassembly of the machine housing. Thanks to the horizontally split bearing plates, the rotors including the bearings can be inserted or removed from above in a very short time. This allows for quick and easy rotor changes with different cutting tools. The size of the grinding chamber can be modified with relatively little effort due to the bolted housing design. Motor configuration, gearbox size, installation position, and rotor speed can all be adjusted as required. Technical Data Cutting chamber: 600 x 1200 mm Number of cutting discs: 60 (made of Hardox) Cutting disc width: 19 mm Maximum cutting disc diameter: 295 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2,800 kg Electrical control The machine is operated via a modern Siemens S 7/1200 controller featuring an advanced 7-inch touchscreen display. Both geared motors are controlled depending on load, and feature a reversing operation. Three different control programs are available depending on the material and application. Options The machine can be tailored for a wide range of applications to meet customer requirements. A variety of options are available: Godpfjyr Tlpjx Ahneud Customized base frames Special hoppers Grinding unit with different tools/cutting discs (diameter, size, thickness, shape, material grade) Various drive power ratings Different gearbox sizes with variable speeds

Condition: new, The Zerma ZCS shredder combines leading shredder and granulator technology in a single, compact unit. By developing the combination of shredder and granulator, ZERMA has successfully expanded its product portfolio. Through the interplay of the proven design and high torque of the single-shaft shredder with a highly efficient granulator, ZERMA is able to deliver a reliable and compact pre-shredding system. Gjdpfx Ahoyr Tg Teneud The shredder and granulator are driven separately, providing better process control throughout. To further improve efficiency, the ZERMA Smart Drive System is used to constantly monitor the load and adjust the current accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where consistent quality in shredding and granulating is required. Typical applications include, but are not limited to, the following: Injection molding Thermoforming Blow molding Recycling Extrusion Waste

Condition: new, The solution for shredding large, long pipes and profiles. The ZRS series has been specifically developed for shredding pipes with diameters of up to 1,300 mm, made from various materials such as PE, PP, and PVC. Godpfsyr Tg Hox Ahnjud These machines can shred plastic pipes up to 9 meters in length directly, without the need for prior cutting or sawing. The core components are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low rotational speeds. The pipe is loaded into an enclosed feed trough, where a hydraulic pusher presses it against the rotor. The pre-shredded material is then conveyed via a belt to a granulator, which processes it into granulate suitable for immediate use. The entire system is operated automatically via a central control unit. Additional advantages of the system include low energy consumption, the avoidance of power peaks, and reduced risk of accidents during pre-shredding.

Condition: new, ZXS 1500 – 2x75kW – Working cross-section: 1500 x 1490 mm ZXS 2000 – 2x90kW – Working cross-section: 1500 x 1900 mm ZXS 3000 – 2x110kW – Working cross-section: 1500 x 2700 mm Guedpfx Asyr Tf Aohned ZXS Series: The single-shaft shredder for demanding shredding tasks. The machines are built extremely robust and deliver high throughput rates. Working widths from 1500 to 3000 mm and a rotor diameter of 750 mm are available as standard. Wide range of applications for the ZXS series: Many other materials can be shredded and prepared for recycling with the ZXS series, such as old cables, PET bottles, paper and cardboard, etc. Let us advise you on how your material can be shredded and recycled.

Condition: new, GENERAL INFORMATION The ZIS series single-shaft shredders are characterized by their spacious cutting chambers, which owe their stability to a robust steel-welded construction. The rotor diameter is generously dimensioned at 457 mm. Rotor widths are available in 1200, 1500, and 2000 mm. The ZIS series retains all benefits of the ZSS series: drive via an oversized gearbox, reversible blades, bolted blade holders, durable externally mounted bearings, hydraulic screen cradle, easy handling, and technically advanced control systems. APPLICATIONS The ZIS series was primarily developed for large-volume hollow bodies such as IBCs, waste bins, pallets, rain barrels, etc. Additionally, the machine can be universally used for countless applications in the plastics and wood industries. Like all Zerma shredders, machines of the ZIS series can also be equipped with various wear protection options. Gusdpfjyr I I Sex Ahnsd ADVANTAGES 35% larger cutting chamber volume compared to the ZSS series Internally positioned hydraulic ram Increased ram speed in the return stroke Compact dimensions Blade holders bolted into rotor pockets

Condition: new, ZERMA single-shaft shredders of the ZPS series offer versatile applications. They are suitable for the size reduction of heavy and bulky parts that cannot be directly granulated by a granulator. The large and heavy rotor of the ZPS shredder series, combined with the low rotor speed and high torque, ensures low power peaks, thereby avoiding high energy costs. Gjdpfx Ahjyr I Ixonjud Single-shaft shredders from the ZPS series are designed for a wide range of applications. Depending on the specific requirements, the shredded material can be used directly in the processing operation or can be further granulated in a downstream granulator. The shredders of the ZPS series are equipped with a two-stage hydraulic system that prevents rotor blockage. The knives and knife holders are completely bolted to the rotor. Generously sized, externally mounted rotor bearings and a hydraulically tiltable screen basket come as standard on every shredder. The machines can be equipped or upgraded with numerous options, such as rotor cooling or Hardox wear protection. Compared to ZSS shredders, the machines of the ZPS series are equipped with a higher pressure unit, which optimizes the feed between pusher and rotor, especially for large-volume parts or pipes.

Condition: new, ZHS 600 - 18.5/22 kW Rotor diameter: 400 mm Working cross section: 520 x 470 mm ZHS 850 - 30 kW Rotor diameter: 400 mm Working cross section: 800 x 820 mm ZHS 1100 - 37 kW Rotor diameter: 400 mm Working cross section: 1,080 x 1,040 mm ZHS 1400 - 55 kW Rotor diameter: 400 mm Working cross section: 1,400 x 1,380 mm ZHS 1500 - 90/110 kW Rotor diameter: 600 mm Working cross section: 1,360 x 1,430 mm ZHS 1700 - 75 kW Rotor diameter: 400 mm Working cross section: 1,640 x 1,550 mm ZHS 2000 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross section: 1,920 x 1,550 mm Gusdpfx Ahsyr I Irjned ZHS 2600 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross section: 2,480 x 1,550 mm ZHS – economical all-rounders The ZHS series features a load-dependent, hydraulically actuated pusher that feeds material horizontally to the rotor in a slightly inclined position. The material is cut between the rotor and stator blades until it passes through the screen, which is bolted and mounted underneath the rotor. The interchangeable screen determines the final particle size. The shredded material can be discharged via conveyor belt, discharge screw, or pneumatically using an extraction system. The ZHS single-shaft shredders are designed for light to medium-duty applications in the plastics industry. Technical details: • Roller-mounted hydraulic pusher with horizontal movement • Bolted knives and knife holders • Optional segmented floor for particularly thin parts and materials • Rotor aggressiveness can be reduced or increased by bolting in filling pieces • Can be integrated in a two-stage system with a granulator as a pre-shredder

Condition: new, The cost-effective single-shaft shredders of the ZWS series enable the realization of a wide range of size reduction tasks, such as a preliminary stage for subsequent briquetting, the production of wood chips for combustion, or re-introduction into the particleboard industry. Depending on throughput and material, the machines can be customized to meet specific requirements. Typical material for shredding includes: - Large panel and board offcuts - Wooden pallets Gusdpoyr I Ilsfx Ahnjd - Waste from joinery workshops - Packaging wood - Construction and demolition timber - Veneers, MDF, and particleboard

Condition: new, machine/vehicle number: ZWS 600 SMART, The ZWS 600 SMART serves as a complement to the ZWS series. The series was designed as an economical solution, specifically for the shredding of wood residues in small and medium-sized woodworking companies. AT A GLANCE: Compact design Sturdy welded steel construction Large-volume hopper for material feed Solid steel rotor with bolted knife holders PLC control for fully automatic operation Technical data SMART 600: Infeed 600 x 840 mm Motor 11 / 15 kW Rotor diameter 250 mm Rotor speed 80 – 120 13 rotor knives Technical data SMART 600 S: Infeed 600 x 840 mm Motor 18.5 / 22 / 30 kW Rotor diameter 250 mm Gusdpfoyr I Ifsx Ahnjd Rotor speed 80 – 120 26 rotor knives

Condition: used, Year of construction: 2017, operating hours: 10,400 h, Equipment: Basic version DW 3060-F "Buffalo" Gusdpfx Ahoyu Srmjnod Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EU directive 50 mm EU towing eye incl. adaptor shoe Hydraulically adjustable support leg Splash protection (mudguards inside and on the sides) Permissible total weight 25,000 kg Tyres 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with emission standard EUROMOT IV Auxiliary hydraulic connection 20 l/min Hydraulic preparation for drive Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) - Size L (174 mm, armoured) Rear conveyor belt: length 5,500 mm, width 1,200 mm, hydraulically foldable, with anti-magnetic central section Longitudinal conveyor belt: length 3,300 mm, width 1,000 mm Centrally positioned wear strips 24 V electric control Roller reversing via electric motor when engine is off automatically reversible fan wheel Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Additional equipment: Hydrostatic travel drive Radio remote control Attachment for comb extension Limiter Size “L” Comb extension Size "L" Limiter Wetting system Removable hopper extension plates on both sides Delivery date by arrangement

Condition: used, Year of construction: 2017, operating hours: 3,500 h, Equipment: Base package AK635 Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive Tyres 385/65 R22.5 Permissible total weight 25,000 kg Hydraulically adjustable support leg Gusdpfx Ahjy D Nktjned Splash guards (inner and side fenders) Mercedes-Benz diesel engine OM502LA, 440 kW at 2,000 rpm, compliant with EUROMOT IIIB emission standard Load-dependent feed control including automatic scraper floor reversal Separate drives for feed roller and scraper floor (twin drive) Fuel tank 750 litres Feed roller: length 1,690 mm, diameter 510 mm, with mounted toothed segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: flail tip “Streusel” Additional hydraulic connection 20 l/min Centrally arranged wear strips Electric pump for operating cylinder functions (e.g. raise/lower support leg and open/close rear basket, fold/unfold rear conveyor, release drive) when the engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket with flap (mesh size from 30 - 280 mm, gradation on request) Rear conveyor: belt length 6,150 mm, belt width 1,500 mm, discharge height 4,500 mm, hydraulically foldable, with anti-magnetic centre section Lower conveyor: belt length 1,700 mm, belt width 1,400 mm Scraper floor with 34 slats Radio remote control incl. transmitter, receiver, 230 V charging station, 12/24 V charging cable, transmitter bracket. The following functions can be controlled: engine stop, engine speed +/-, material feed: on/off/reverse, fine shredding basket: open, rear/lower conveyor: on/off, feed roller: reverse, scraper floor stop/reverse/forward, support leg: raise/lower, drive preparation: stop/reverse/forward/release Drive preparation Acoustic start-up warning Paint finish: RAL2011 deep orange Fine shredding basket 60 mm Optional equipment: Impact plate with impact bar Overband magnet -Neodymium- Frame for overband magnet Smooth feed roller Scraper floor with cleaning holes Delivery date to be agreed

Condition: used, Year of construction: 2019, operating hours: 6,725 h, Equipment: Gusdpoy D Nicefx Ahnod Base version DW 3060-F "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting in accordance with EC directive 50 mm EC towing eye incl. slip-on shoe Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with EUROMOT IV emission standard Auxiliary hydraulic connection 20 l/min Hydraulic pre-equipment for traction drive Fuel tank 2 x 300 litres Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Discharge conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24V electrical control system Roller reversal via electric motor when engine is stationary Automatically reversible cooling fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL 2011 deep orange Optional equipment: Hydraulic traction drive Auxiliary hydraulic connection 70 l/min Radio remote control Overband magnet for rear conveyor Frame for overband magnet Moistening system Delivery date upon agreement

Condition: excellent (used), Year of construction: 1993, Wieser Vorbrecher DV 1350-V EPS Crusher / Grinder / Shredder Capacity: 40 m³/h Available: 3 units In addition to its crushing function, the machine also acts as a rubbing mill (granulator), designed to break the material down into individual EPS beads. Unlike simpler machines of this type, which only feature a primary crusher, this is a much more advanced design consisting of two main sections: Guedpfx Ahjwtmw Aenjd 1. Upper Section: Twin-Shaft Primary Crusher This section performs the initial size reduction of bulky material before it enters the grinding chamber. 2. Lower Section: Grinding and Rubbing System The final reduction process takes place in the lower chamber, which consists of: -Rotor: equipped with 3 moving blades -Stator (fixed knives): equipped with 2 stationary blades -Screen: located at the bottom of the chamber, allowing only sufficiently processed material to pass through Optional Equipment The machines can also be supplied complete with dust collectors and an extraction fan. The Wieser ESTAL1350 dust collectors were specifically designed to match the throughput of the crusher. Tags: EPS shredder, EPS crusher, styrofoam grinder, recycling machine, waste reduction system, foam granulator, EPS waste processor, volume reduction machine, compactor, dust collector, extraction fan.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 4,451 h, functionality: fully functional, machine/vehicle number: W09307330E2D38070, Equipment: AdBlue, Shredder/Crusher Doppstadt DW-3060 SA - Year of manufacture: 11.2014 Gjdozcwziopfx Ahnsud - Mercedes-Benz internal combustion engine - AD Blue - Euro 6 - VIN: W09307330E2D38070 - Machine mounted on a three-axle trailer chassis - Shredding shaft, 3m long, diameter 0.60m - Magnetic separator - Additional hydraulic outlets - Hydraulic drive - Hydraulically extendable support leg with wheels - Ready for operation - VAT invoice available Contact: 607-53-88-55

Condition: excellent (used), EPS CRUSHER / SHREDDER / GRINDER – GRINDER N. 1 For sale: a professional, high-efficiency EPS (expanded polystyrene) shredder/grinder, designed for continuous operation within a technological production line. Unlike standalone machines that require manual feeding or separate conveyor loading, this unit is specifically engineered for installation directly underneath an EPS cutting line. It automatically collects, crushes, and reduces the volume of both side and bottom waste material as it falls onto the conveyor belt during the cutting process. PRICE: Original Price: 6,500 EUR Guodpfx Ahszc Hnljned New Price: 5,900 EUR Technical Specifications: External Dimensions (L x W x H): 191 x 120 x 64cm Inlet Dimensions: 148 x 38cm Drive System: Heavy-duty 7.5 kW gear motor (motoreducer) Shaft Configuration: Dual-shaft drive via heavy-duty gears (both shafts are actively driven) Tags: EPS shredder, polystyrene crusher, EPS grinder, recycling equipment, volume reducer, styrofoam shredder, compactor, waste processor.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, total power 5.5 kW briquette diameter 50 mm hopper diameter 900 mm year of manufacture 2008 capacity 30-50 kg/h power supply 380 V Guodpfszdyl Sox Ahnjd CE marking Length 175 cm Width 130 cm Height 155 cm

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 330, rotational speed (max.): 2,900 rpm, motor model: 5,5kW, Equipment: CE marking, STYROFOAM/STYRODUR GRINDER KP2 5.5 kW three-phase 400V electric motor Circuit breaker 1:0, power cord, 5-pin 16A plug 500 mm diameter grinding drum with hopper feed two granulate outlets with rubber clamps single-direction rotary knife with double blades Gujdpfsy Nantjx Ahnjd 13 mm diameter screens positioned around the grinding drum operating capacity min. 4 m³/h The crusher allows the resulting granules to be bagged directly into bags or plastic sleeves, which are secured to the outlets using elastic rubber straps. All our shredders come with complete technical documentation (DTR), CE certification, and professional operating instructions

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 440, total length: 650 mm, total height: 1,500 mm, overall weight: 100 kg, total width: 1,100 mm, filling opening length: 650 mm, filling opening width: 450 mm, motor model: 11kW, Equipment: CE marking, RP2 Foam Shredder – Industrial Foam Grinding and Recycling Machine Professional Foam Waste Processing Solution The RP2 Foam Shredder is a heavy-duty industrial machine designed for shredding and grinding polyurethane foam (PU foam), upholstery foam, foam offcuts, production waste, and bonded foam materials. It is an ideal solution for furniture manufacturers, mattress producers, upholstery workshops, foam processing companies, and recycling facilities looking to efficiently reuse foam waste and reduce disposal costs. The machine converts foam scraps into high-quality foam flakes that can be reused for: Godpfx Ahjzdra Usnsud Cushion and pillow filling Upholstery production Acoustic insulation products Rebonded foam manufacturing Packaging materials Other recycling applications Key Benefits ✔ High processing capacity – up to 10 m³/hour ✔ Suitable for soft and rigid polyurethane foam ✔ Processes foam with fabric, textile, or synthetic leather coverings ✔ Robust industrial steel construction ✔ Reliable and low-maintenance operation ✔ Easy loading and material handling ✔ Uniform output thanks to interchangeable screens ✔ Custom configurations available Technical Specifications Motor power: 11 kW Power supply: 400 V / 3 Phase Rotor diameter: 500 mm Large feeding hopper Dual material discharge outlets Single-sided cutting rotor knife Interchangeable screening system Capacity: approximately 10 m³ of foam per hour Applications: Furniture manufacturing Mattress production Upholstery workshops Foam converting industry Recycling facilities Acoustic insulation manufacturers Packaging industry Custom Manufacturing We are a manufacturer of industrial foam processing equipment and can adapt the machine to individual customer requirements. Different motor sizes, screen configurations, capacities, and customized solutions are available upon request. Why Choose RP2? Increase the value of foam waste Reduce disposal costs Improve recycling efficiency Produce reusable foam flakes for further manufacturing Reliable industrial-grade construction Direct support from the manufacturer Interested in improving your foam recycling process? Contact us for detailed specifications, pricing, delivery options, and customized solutions tailored to your production needs. Manufacturer Direct | Industrial Foam Recycling Equipment | Made in EU

Condition: good (used), Year of construction: 2005, functionality: fully functional, LINDNER KOMET 2200 SHREDDER Shredder for Refuse-Derived Fuel (RDF) and plastic Two 132 kW motors Number of blades on the rotor: 60 Blade dimensions: 175 x 57 x 28 mm Gjdpfx Ahozd Hqhjnjud Number of fixed blades: 12 Screen with a 30 mm hole diameter Production: 7 tons per hour Year: 2005

Condition: used, machine/vehicle number: 11403, Rotor blades: 2 x 7 stars Rotor width: 1200 mm Rotor diameter: 350 mm Inlet: 850 x 1200 Gsdeyx Nlyspfx Ahnsud Power: 30 kW

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 2 h, functionality: fully functional, Cable Granulation Plant GUIDETTI SINCRO MILL 530 + Pre-shredder PMG-H 900 – Immediately Available – As New For sale is a high-quality cable recycling plant from the Italian manufacturer Guidetti, consisting of: • Guidetti Sincro Mill 530 cable granulation plant Gusdpfx Ahoy Ahlysnjd • Guidetti PMG-H 900 pre-shredder • External filtration unit The system was installed, tested at a customer site, and then professionally dismantled. Due to a project change, the plant is now for sale. Condition: Nearly new (test operation only) Availability: Immediate ex stock – no lead time Price: Significant savings compared to new equipment — Special advantages: • Immediately available – no long lead times as with new machines • Only operated for test purposes – correspondingly minimal wear • Complete system incl. pre-shredder • Proven Guidetti technology — Description: The Sincro Mill 530 is a compact, fully integrated cable granulation plant for processing mixed copper and aluminum cables – without pre-sorting. The system consists of: • Granulator (cutter mill) • Zig-zag separator • Turbo mill for fine grinding • Dry separation table Material purity up to 99% can be achieved. In combination with the PMG-H 900 pre-shredder, the system offers a high-performance recycling line for industrial applications. — Technical Data Sincro Mill 530: • Throughput: 450 – 600 kg/h • Motor power: 53 kW • Dimensions (L x W x H): 3410 x 1515 x 4395 mm • Weight: approx. 2,700 kg • For processing copper and aluminum cables — Technical Data Pre-shredder PMG-H 900: • Power: approx. 38.5 kW • Dimensions (L x W x H): 2110 x 2070 x 2245 mm • Weight: approx. 2,840 kg Suitable for pre-shredding cables, non-ferrous metals, and plastics. — Note: The plant is available at short notice. Subject to prior sale. Inspection by appointment possible.