2 x 18.5 kw motors
Burcjy3wdx
Weima 4-shaft shredder ZM 30 Nr.B, constructed 1995, 2 x 11 kW
Technical data
Manufacturer Weima
Type ZM 30
Int.no. B
Year of construction 1995
Burdb7l70i
Motor 2 x 11 kW
Operation hours 6720 h
Hopper opening 1250 x 1000 mm (i x w)
Cutting shafts 4
Working width 462 mm
Lengh 562 mm
Shaft diameter 235 mm
Mesh aperture 15 mm
Throughput up to 1 t/h
Dimension Approx. 1500 x 900 x 2000 mm (LxWxH)
Machine weight approx. 2000 kg
TPA Twin-shaft 4-motor GM 2000 SHREDDER
Manufacter year: 2006
Power: Electric engines 360 kW - 4 motors
Shredding chamber 2050 mm x 1520 mm
Status: running
Ofzjyrtv
VERY LIGHT WORK MACHINE.
Buijeyedqk
ONLY 987 HOURS.
READY TO WORK.
Weima 4-shaft shredder ZM 30 Nr.A, constructed 2004, 2 x 11 kW
Technical data
Manufacturer Weima
Type ZM 30
Int.no. A
Year of construction 2004
Motor 2 x 11 kW
Operation hours 6753 h
Hopper opening 1250 x 1000 mm (i x w)
Cutting shafts 4
Working width 462 mm
Lengh 562 mm
Burdbaym8f
Shaft diameter 235 mm
Mesh aperture 15 mm
Throughput up to 1 t/h
Dimension Approx. 1500 x 900 x 2000 mm (LxWxH)
Machine weight approx. 2000 kg
Brand: PRECIMECA
French manufacturer Toulouse
Hydraulic drive
Power: 2 x 75 KW
Engine: LEROY SOMER
Cutting table: 1600 x 1100
Disc thickness: 55 mm
14 discs per rotor
7 teeth per disc
hydraulic unshredder ejection door
Stress pusher in the hopper.
Machine near new condition.
New electrical cabinet
Overhauled engines
New hydraulics and or totally revised
Bpm8u2f08d
new cylinders
Full frame
The VECOPLAN waste shredder VAZ 145/135 is designed exclusively for shredding files.
Throughput capacity with material like : 1.000 kg / h - depending on material
Power 55 kW
Nominal motor current : 104 A
Protection class : IP 55
Overload protection
Infeed length : 1450 mm
inlet width : 1350 mm
Rotor width : 1299 mm
Rotor diameter : 370 mm (flight circle)
Bjjtclas
37 rotor blades : 40 x 40 mm
Speed: approx. 135 rpm
E-motor with turbo coupling,
V-belt drive, two-stage spur gearbox
Feed unit
Contr...
Cutting size: 400 x 500 mm
Drive power: 5,5 kW
Blade width: 25 mm
Number of blades: 17 pieces
Blade shape: 3-hooked
Perforation diameter: variable
Construction year: 2012
Bmeuz7figf
Cutting unit with funnel, hydr. press-in device, frame and control.
3 shafts shredder
Hopper 825*536
Cutting table 488*525
Engine Power 2*15 kW
48 blades with 10 picks of 15mm thickness
Hopper, electrical panel and holder included
Fogqdsy
UNTHA RS 30 4S 2 X 7,5 KW FOUR-SHAFT Shredder
Description
Four-shaft system
Engine installed power: 2 x7,5 KW
Shaft lenght: 440 mm
cutting unit: 440 x 540mm
Hopper upper edge: 1100 x 1250 mm
Main shaft speed: 23 rpm
Auxiliary shaft speed: 24 rpm
Dimensions: 1800 x 1300 x 2030 mm
Weight: 1100 kg
Brplywcde0
Brand: PRECIMECA
Hydraulic drive
Power: 2 x 75 KW
Cutting chamber: 1600 x 1100
14 discs per rotor
7 teeth per disc
Disc width 55 mm
Stress pusher in the hopper.
Machine in near new condition.
New electrical cabinet
Overhauled engines
New hydraulics and or totally overhauled
Cutting table like new
Full frame
New paint
- Mechanical:
Sanding, primer, painting
Dismantling of all electric and hydraulic reducers.
Display the machine.
Reassembly, exchange of all silentblocs, nuts, bolts etc ...
- Hy...
Cutting size: 400 x 500 mm
Drive power: 5,5 kW
J9fodr
Blade width: 25 mm
Number of blades: 17 pieces
Blade shape: 3-hooked
Perforation diameter: variable
Construction year: 2019
Cutting unit with deflector plate, without funnel, frame and control.
Optional new parts: funnel + machine frame + control
Cutting size: 480 x 580 mm
Drive power: 2 x 11 kW
Blade width: 30 mm
Number of blades: 24 pieces
Perforation diameter: 30 mm
Construction year: 2009
Bfs32rbpet
Machine with funnel, frame and control.
I sell shredder n.4 shafts with the grid 35mm + mill under n.3 rotating blades + n.2 against blades grid 8mm, plant complete with belt feed, fan for extraction of material, cyclone with filter and dust collector, fan for fumes, door castle BIG BEGS
Plant and been completely painted and overhauled also available for testing, thanks.
Cjo98jz0u
Single-shaft crusher with hydraulic pressure
rotor length 600mm
diameter 220mm
charge 600x1000mm
movable knives 40x40, quantity 22+4pcs
fixed knives -2 rows
hydraulics 2.2kW
main engine power 18.5kW
O8zuh
sieve 25mm
weight 1400kg
CSR-900/400R
Power:
55 kw
J99lgz
Dimensions:
1800x2400x2500 mm
Weight:
5500 kg
The single-shaft industrial shredders CSR allow the grinding and the volumetric reduction of tenacious materials and electronic industrial waste and can be driven by electric or hydraulic power units. The selection grids, available in different sizes, allow to obtain the required size at the first step. The electronically controlled hydraulic power box and rotation inversion system allow to optimize the productio...
New & Unused DGM Environmental Technologies general purpose model DGS 1200 Single Shaft Shredder.
Has approximately 1570mm x 1120mm feed opening.
Unit has 81 knives fitted to rotor which measures approximately 457mm diameter x mm wide and 8 stator knives.
Unit is driven by 55kw, 400volt, 50hz, 1480rpm motor.
Unit has hydraulic powerpack driven by 5.5kw, 400 volt, 50hz, 940rpm motor.
Unit has 50mm bottom screen fitted.
Unit includes Siemens Smart Line Touch Screen PLC control panel. Also in...
Plummer Block Housings, Plummer Block Housings
-Hole center height: 40/Ø 10 mm
Il3yijo7
-Base plate: 145 235 x 95 mm
-Price: per piece
-Number: 2 pieces
-Dimensions: 145/95/H approx. 65 mm
-Weight: 1.3 kg
* General * SKU306M440 * LocationBarneveld * MakeKusters Venlo * No.60193/4 * Year of construction2006 * Material * MaterialStainless steel * Key Features * Shredder * Double shaft * With hopper * Inlet600x400x240mm * Motor1kW, 3x 400 Volt * Information * Mounted on legs * With switchgear * Floorspace1,5 x 0,9m * Total height2,1m * Weight600kg * Extra SpecificationsHopper and breaker are stainless steel What you can expect from Foeth: all our machines are in working condition, and at a reduced p...
Multi-speed machine with flexible shaft BIAX type MB 4-2
Bikxdoqkkh
machine No. 9/50/55 Year of construction approx. 1970
length of the flexible shaft: 2 meters
Speed: 900 - 9000 rpm. infinitely variable
Engine speed: 3000 rpm.
Engine power: 1,2 kW = 1,5 PS
Power supply: 380 Volt, 50 Hz
- Handheld straight grinder with collet Ø 6 mm
- swivelling and rotating foot
- Transport trolley with 2 drawers
Overall dimensions: 850 x 550 x 1100
Weight: approx. 80 kg
sound condition
Universal for milling, g...
Single-Shaft-Slow-Speed-Shredder Doppstadt DW 3060 K
Mercedes-Benz engine MTU 6R1300, 315 kW, EUROMOT IV
Machines weight: 30.000 KG
Track-chassis
18-channel remote control
Rear conveyor 7 m
Overband magnet neodym
Magnetic roller
Water spraying system
21 trapezoidal shaft teeth with DoppLock fitting system, L-size
20 trapezoidal comb teeth, L-size
Comb extentions
Additional hydraulic drive 70 l
The machine is in a good technical and optical condition!
Buuudkl77s
The machine will be sold in the...
Technical characteristics
Hopper dimensions: 800 X 800 mm Matrix grid: 14 mm Power and Motors
Power: 2 X 9 Kw Overall dimensions
Bso8kjr39v
Length: 2300 mm Width: 1400 mm Height: 2300 mm
New & Unused DGM Environmental Technologies general purpose model DGS 850 Single Shaft Shredder. Has approximately 840mm x 1340mm feed opening. Unit has 60 knives fitted to rotor which measures approximately 387mm diameter x 900mm wide and 6 stator knives. Unit is driven by 55kw, 400volt, 50hz, 1480rpm motor. Unit has hydraulic powerpack driven by 3.75kw, 220-380 volt, 50hz, 1430/1730rpm motor. Unit has 50mm bottom screen fitted. Unit includes Siemens Smart Line Touch Screen PLC control panel. I...
Moving floor chipper, crusher, shredder for chipboard, solid wood and pre-shredded pallets.
Only 176 operating hours.
A video of the machine in operation can be sent on request.
Hopper size, approx. 800 x 600 x 900mm
Rotor length 600mm, rotor diameter 252mm
low speed rotor
drive motor 18,5kW
screen diameter top 20mm, bottom 15mm
Shaft with 14 knives
Moving floor load dependent controlled
SPS-control
The knives were freshly turned once, so they can still be used twice
Suction nozzle 160mm
Instruc...
Cutting disc diameter: 235 mm
Cutting unit width: 462 mm
Cutting unit length: 562 mm
Izgk7wp
Working cross section approx. 455 x 560 mm
Drive motor 2 x 11 kW
Weight approx. 1300 kg
Used machine, overhauled,
new knives and counterknives,
new oil and lubricants,
new colour
Feed opening: 600x 800 mm
Rotor length: 600 mm
Rotor diameter: 258 mm
Hghsfq0do
G rotor
Tools: 14 delta knives 30x30 mm
Controlled by PLC
Hydraulic tank size: 20 l
Single-shaft shredder especially suitable for secondary shredding, granulation of pre-shredded material.
Application: Commercial waste for thermal or material recycling, e.g. paper, cardboard, plastics and foam materials, rubber, leather, textiles, floor coverings, etc.
Drive power: 2 x 200 kW ( 400 KW)
Control cabinet: complete with FÜ ABB and recooler
Volume: approx. 4 m3
working opening: 2135 x 2030 mm
rotor length: 2115 mm
rotor flight circle: 740 mm
Rotor speed: approx. 264 rpm
Number of ro...
Infeed opening: approx. 974 x 917 mm
Rotor width: approx. 1000 mm
Bucvp3kwnq
Rotor diameter: approx. 250 mm
Drive: 30 kW
Incl. second-hand control unit
High Class Shredder KS 1000/2
Technical Data:
Propulsion: 2x 15kW Motors Revolutions: 16,5 RpM at 7269 NM Cutting width: 1000 mm
Blade width: 19 mm
Dimensions: 1700 x 2400 x 2550 mm Advantage of double motor drive: Constant torque on both shafts
Areas of Application:
Grdqukd7a
Industrial waste:
Metal Cans & Buckets, Plastics, Wood
Production waste:
Cartons, Paper, Rubber
Electronic waste:
Cable, Cable Remains, Small Electronic Devices
Other waste:
Food, Leftovers, Biowaste, Wood, Gl...
Shredder single shaft ZERMA Model ZSS 850 + 55kW
Rehabilitated : bearings, cutting tools, rotor, motor, paint. NEW
Hopper opening (mm): 1340x840. Equipped with a crusher type hopper that limits releases
Cutting chamber : 700x730mm
Rotor diameter x width (mm): Ø 457 x 850 mm
Rotor speed: 80rpm
Rotor type : E
Number of rotor knives : 40 dimensions: 34x34x22
Stator knives: 1 row of 3
Engine power: 55kW
SEW gear box
Screen perforation: Ø25mm and Ø50mm other on request
Total length : 2070mm
Length on...
EcoShred® 2SS-1800X-220kW
Gwskr8ubs
Single-shaft shredder especially suitable for re-shredding, granulation of pre-shredded material.
Application: Industrial waste for thermal or material recycling, e.g. paper, cardboard, plastics and foam, rubber, leather, textiles, floor coverings, etc.
Lindner Power Komet 2200, rebuilt machine 12/2020
Year of manufacture 2008
Switch cabinet: star/delta
control panel: complete
Drive motors : 2x132 kW
Paint new /RAL: 5003/7001
rotor bearing / withdrawal sleeve / shaft seals : new
Wear plates: R+L...
Twin shaft Shredder
Dx3j0q
Manufacturer: Progetto Ecoambiente T15-150 B
year: 2006
power: 200 Hp with electric motors
blade thickness 70 mm
High Class Shredder KS 1000/2
Technical Data:
Propulsion: 2x 15kW Motors Revolutions: 16,5 RpM at 7269 NM Cutting width: 1000 mm
Blade width: 19 mm
Dimensions: 1700 x 2400 x 2550 mm Advantage of double motor drive: Constant torque on both shafts
Areas of Application:
Industrial waste:
Metal Cans & Buckets, Plastics, Wood
Production waste:
Cartons, Paper, Rubber
Electronic waste:
Cable, Cable Remains, Small Electronic Devices
Other waste:
Food, Leftovers, Biowaste, Wood, Glas, Cerami...
Shredder single shaft Zerma ZWS 850-E 22kW
ZWS single-rotor shredders are used in the wood industry to achieve an economic crushing of scrap wood, pallets or other waste. The machines have been designed for strength and reliability in daily operations. These shredders can be integrated in a complete line with other ZERMA equipment and accessories such as belt conveyors, crushers, etc.
Rotor diameter : 400mm
Rotor width: 850 mm
Rotor Rotation Speed: 100 Rpm
Cutting chamber dimension 800x820 mm
2...
EcoShred® 2SS-1800X-180kW
Corukfp
Doppstadt DW 3060 Type F
- Year of manufacture 2016
- Operating hours 2846
- shredder roller with 125 teeth
- fire extinguishing system
- humidification system
- remote control
- Hechband 5,5m
29bv8f7j
- Limiter intake
- Engine MTU 490 HP
Machine is overhauled and immediately available
Doppstadt single shaft shredder with underframe, discharge belt, control cabinet and cabling.
Operating hours: approx. 17.636 h
Drive power 315 kW
direct current motor: LAK 4250 C
Eef7zu2
cutting unit: roller length: 2500 mm
diameter: 600 mm
rotor speed: 0-35 1/min
roller teeth: 17 pieces, width: 60 mm, height: 150 mm
comb length: 2500 mm
Comb teeth: 18 pieces, width: 60 mm
Throughput capacity Up to approx. 30 t/h depending on material
Total weight approx. 23 t
Underframe with discharge belt: ap...
WEIMA Zerkleinerer WL 4.
Antrieb:18,5 kw.
Messer:28.Stück
zur Zeit nur noch 1.Stk an Lager.
Vs9lrq
Feed opening: approx. 1150 x 1200 mm
Rotor width: approx. 1200 mm
Btggukezbf
Rotor diameter: approx. 600 mm
Stator knives: 10
Rotor knives: 96
Incl. a second-hand control unit.
EcoShred® 2SS-1500X-150kW
Bufym3r0jm
Cutting size: 880 x 670 mm
Drive power: 22 kW
Blade width: 30 mm
Number of blades: 29 pieces
Bey8yed
Blade shape: 3-hooked
Perforation diameter: 25 mm
Construction year: 2012
Cutting unit with machine frame without feet, without funnel, frame and control.
Optional new parts: funnel + machine frame + control
Code: 0357
Brand: COLOMBO
Model: 130
4-shaft tenoning machine for window frames
Technical data:
Cutter-bearings-heads diameter mm 120
Max. tenon length mm 130
Max. tenon thickness mm 100
Circular saw blade mm 300
Max. tenoning width mm 1000
Plane inclination 20 degrees
Inclination of the frame up to 45 degrees
Spindle moulder motor Hp 5 - Rpm 3000
Spindle motor Hp 4 - Rpm 5300
Overall dimensions: mm 2800 x 1200 x 1200 h
Fb9zylh
Weight kg 1000
WEIMA. Shredder Neuanlage.
Typ: WL 4.
Bgrsmqbooc
Antrieb: 18.5 kW.
Rotorbreite:600.mm.
doppelte Messer Reihe.
Trichter: Logspacer 600x1050.mm.
Details of the Two Shaft Shredder KS 1000/2
Gvw7bk
Engine: 2x 15kW
Engine speed: 16,5 U/min - 7269NM
Blade Strength: 19mm
Working width: 1000mm
“Pallmann PS 4-7,5 F – Granulator / Roll Crusher” for Sale
Find our complete stock on our website.
Manufacturer: Pallmann
Qhonex79
Type: PS 4 – 7,5 F
Mach. No.: 2264036
Year of Manufacture: 1964
Electrical Motor: 75 kW Included
Included frame.
Shredder will be overhauled, sandblasted and painted.
EcoShred® 2SS-1300X-74kW
Cdsbagrg