Used Document Shredder for sale (8,755)

Condition: ready for operation (used), functionality: fully functional, rotor length: 650 mm, rotational speed (max.): 160 rpm, rotor diameter: 500 mm, TECHNICAL DETAILS Ljdpfx Aljzr Hylsmjrr Hopper opening: 1,850 × 1,250 mm Hopper volume: approx. 3.0 m³ Rotor diameter: 500 mm Rotor length: 650 mm Rotor speed: approx. 160 rpm Power: material-dependent MACHINE DETAILS Control system: PLC control Motor-gearbox power: 45 kW Control cabinet: Fully wired Cable length: 5 m EQUIPMENT Control cabinet including 5 m cable Automatic star-delta starter

Condition: refurbished (used), Year of construction: 1995, functionality: fully functional, power: 367.75 kW (500.00 HP), filling opening width: 700 mm, filling opening length: 1,200 mm, rotational speed (max.): 1,050 rpm, rotational speed (min.): 950 rpm, - Engine: Deutz 500 HP Lrodpfx Ajy I Uwaslmer - Fill opening dimensions: 1200x700 mm - Rotor: 4 shafts and 40 stars - 950-1050 rpm - Throughput: 4-6 t/h - incl. new spare rotor & stars - completely overhauled & modernised

Condition: excellent (used), Year of construction: 2001, CATALOGUE NO. 7089 TECHNICAL DATA - Loading hopper inlet 1020x1230mm - Rotor working width 1020mm Lrodpfeztau Sjx Almjr - Rotor diameter 348mm - Main motor 22kW, 400V, 50Hz - Pump motor 0.75kW - Number of knives: 50 pcs - Knife size: 35x35x20mm - Sieve: 12mm - Hydraulic pusher drawer - Electric auto-reverse - Dimensions (L/W/H): 2000x1130x1530mm - Weight: 970kg ADVANTAGES – Auto-reverse – Similar to WEIMA WL 10 – German made – Pusher drawer – Very good condition – Used shredder, DTR+CE documentation Net price: PLN 99,900 Net price: EUR 23,790 based on exchange rate 4.2 EUR (Prices are subject to change with major fluctuations)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Lodpfx Alju Tha Ismsrr Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: UNTHA 1, power: 22 kW (29.91 HP), Untha RS 30 4S – Year of manufacture 1992 Cable shredder, pre-shredder, chip shredder, two-shaft shredder, rotary shear, rotary knives, chip shredder Power: 400V, 22kW with pump station, with control system Includes 5m long screw conveyor and inclined belt conveyor Ledjyhzwcopfx Almerr Ideal for pre-shredding cables (including plug ends), plastics, metals, wood, etc. Very robust motor and gearbox Very good condition Collection by appointment only in 75053 Gondelsheim Shipping via freight company possible, please provide postal code for inquiry

Condition: excellent (used), Catalog number: 8089 TECHNICAL DATA - inlet width 400mm - inlet height 170mm - shaft width 430mm - number of knives on the shaft 4 pcs - drive rollers, toothed, top and bottom 2 x 1.73kW - screen 25x25mm - automatic reversing - vibrating feeder 1.5kW - length of vibrating feeder 3250mm - width of vibrating feeder 380mm - main motor 45kW - overall dimensions of vibrating feeder 3250x750x1100mm - dimensions of shredder length/width/height 2400x1400x1400mm - total weight approximately 3000kg ADVANTAGES – vibrating feed table – automatic reversing – manufactured by the Polish brand OSKA – DTR + CE documentation – unpainted – used shredder, very good condition Net price: 96900 PLN Net price: 23071 EUR depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations) Lrsdpfozwf Tusx Almsr

Condition: excellent (used), CATALOG NUMBER 6875 TECHNICAL SPECIFICATIONS - Infeed width: 720 mm - Infeed height: 160 mm - Maximum input material thickness: 160 mm - Shaft width: 720 mm - Shaft diameter: 600 mm - Knife length: 80 mm - Number of knives: 4×12 pcs - Screen size: 25 mm - Infeed pressure feed roller motor: 0.75 kW - Lower toothed feed roller motor: 1.8 kW - Upper toothed feed roller motor: 1.8 kW - Vibrating chute length: 4470 mm - Vibrating chute width: 710 mm - Vibrating chute motor: 2.2 kW - Main motor: 55 kW - Autoreverse (with adjustable control) Lrjdpfezrm Uiox Almor - Extraction nozzle diameter: 260 mm - Vibrating chute dimensions (L/W/H): 4470/950/930 mm - Machine dimensions (L/W/H): 3100/1500/1170 mm - Total weight: approx. 5500 kg – German manufacture – Very low hours – Original documentation – Used shredder, condition very good / excellent Net price: 139,900 PLN Net price: 33,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Condition: used, Shredder Dreher S20/20 No.:K2740 Funnel opening: 310mm x 340mm Motor: 3kW 6.3 Amps Ljdpfx Alowh I Uxemerr 380 Voltage - Documentation available: No - CE certificate present: No - Main motor power [kW]: 3 - Opening width [mm]: 310 - Opening length [mm]: 340 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Catalogue number: 7649 TECHNICAL DATA Infeed width: 900mm Infeed height: 300mm Shaft width: 1030mm Shaft diameter: 700mm Knife length: 1030mm Number of knives: 3 pcs Screen dimensions: 70x70mm Bottom: 2 toothed feed rollers Bottom roller motor: 7.5kW Top: 2 toothed feed rollers Top roller motor: 7.5kW Belt conveyor Redler chain conveyor 5600mm + 10600mm 2.2kW Infeed belt width: 800mm Main motor: 90kW Reverse operation Total machine dimensions (L/W/H): 3300x3100x1700mm Shredder base dimensions: 3300x2080x1940mm Feeder / redler dimensions (L/W/H): 5600x900x1000mm + 10600x1050x1600mm Base dimensions for infeed belt: 5100x1300x2520mm Total weight approx.: 16000kg ADVANTAGES – German-made – Redler chain conveyor equipped with scrapers – Reverse operation – DTR technical documentation – Used shredder in very good condition Net price: 219,900 PLN Net price: EUR 52,350 (at EUR 4.2 exchange rate) Lsdpjzrm T Sjfx Almjrr (Prices may vary with significant fluctuations)

Year of construction: 2021, condition: ready for operation (used), A single-shaft shredder Erdwich for contaminant-free red brass and brass chips is available. Cutting unit dimensions X/Y: 600mm/500mm, height: 300mm, knife width: 25mm, screen hole diameter range: 25mm-35mm, machine dimensions X/Y/Z: approx. 1600mm/650mm/800mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Lrsdjymfc Nopfx Almor

Condition: excellent (used), Year of construction: 2017, CATALOGUE NUMBER 8014 TECHNICAL DATA - inlet width 540mm - inlet height 260mm - roller width 560mm - roller diameter 590mm - number of knives on the roller 4 pcs - feed rollers, geared, top and bottom 2x4kW - screen 40x35mm - electric auto-reverse (adjustable) - reverse gear - vibrating feeder 2.2kW - vibrating feeder length 6000mm - vibrating feeder width 500mm Lrsdpfx Aleza Tvdemjr - capacity approximately 12-16 m³/h (depending on the type of material being shredded and the screen opening) - main motor 75kW - automatic hydraulic lifting function for the upper feed roller - overall dimensions of the vibrating feeder 6000x950x1600mm - overall dimensions of the machine L/W/H 3400x1700x2000mm - total weight approximately 6000kg ADVANTAGES - vibrating feed table 6000mm - electric auto-reverse (adjustable) - reverse gear - manufactured by the Polish brand OSKA - electrical diagram, DTR documentation + CE - unpainted - used shredder, very good condition Net price: 179900 PLN Net price: 42834 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to higher fluctuations)

Condition: ready for operation (used), Year of construction: 2007, The Vecoplan VAZ 2000 M F-T is a robust heavy-duty single-shaft shredder manufactured in 2007 for industrial recycling applications. Suitable for plastics, films, wood, paper, cardboard, EBS/RDF, and commercial waste. Formerly part of a production line for LDPE PCR film bales; the production line was modernized and rebuilt in 2024. Successful tests for processing used pallets and cardboard cores have been carried out. The processing of wood and cardboard cores is technically unproblematic. The machine condition has been documented by Vecoplan, and the required spare parts for recommissioning have already been ordered. The sale is due to an internal department closure and the associated restructuring of operational processes. Rotor length approx. 2,000 mm, hydraulic ram for uniform material feeding, flipper/airspring counter-knife system for high operational reliability, Torque/HiTorc drive for high torque and energy-efficient operation, replaceable reversible cutting inserts, suitable for both pre-shredding and secondary shredding, final particle sizes depending on screen and material approx. 10–250 mm, high throughput capacity, and robust, maintenance-friendly design. Inspection possible by appointment. Lrjdpfoy T Hbbjx Almjr

Year of construction: 2011, condition: ready for operation (used), A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible. Lodpfx Aou Nlkxslmorr

Condition: excellent (used), Catalogue number 7973 TECHNICAL DATA - feed opening width: 410mm - feed opening height: 210mm - shaft width: 430mm - shaft diameter: 330mm - knife length: 430mm - number of knives: 2 pcs - screen dimensions: 50x50mm - lower toothed feed shaft - lower shaft motor: 1.1kW - upper toothed feed shaft - upper shaft motor: 1.1kW - vibrating chute - vibrating chute length: 4160mm - vibrating chute width: 370mm - main motor: 45kW - auto-reverse (adjustable) - reverse mode - machine overall dimensions (L/W/H): 2150x1450x1050mm - vibrating chute overall dimensions (L/W/H): 4160x650x880mm - weight approx. 2500kg Lredoztq Suopfx Almjr ADVANTAGES – German manufacture – Auto-reverse (adjustable) – protects the machine from blockage and damage in case of overload – Reverse mode – DTR technical documentation – Used shredder, in very good condition Net price: 73,900 PLN Net price: 17,600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 8039 TECHNICAL DATA - inlet width 320mm - inlet height 160mm - roller width 320mm - blade length 310mm - number of blades 2 pcs - toothed drive roller, top Lrsdpfx Aezkvglolmsr - toothed drive roller, bottom - vibratory feeder with magnet 1650x310mm - automatic reversing - main motor 22kW - feed motor 2×1.1kW - machine dimensions with vibratory feeder (length/width/height) 2600x1500x1800mm - machine and vibratory feeder weight approximately 1500kg ADVANTAGES – Austrian made – vibratory feeder with magnet 1650mm – automatic reversing – original DTR documentation – used shredder, very good condition Net price: 34900 PLN Net price: 8310 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7897 Technical data: - inlet width 400mm - inlet height 160mm - shaft width 530mm - shaft diameter 530mm - knife length 530mm - number of knives 2 pcs - screen dimensions 65x65mm - lower toothed feed roller - lower roller motor 2.2kW - upper toothed feed roller - upper roller motor 2.2kW Ledpfszmfu Rex Almorr - belt feeder - feeder belt length 2200mm - feeder belt width 400mm - main motor 45kW - auto-reverse (adjustable) - overall dimensions (L/W/H) 4400x1600x1630mm - weight approx. 3000kg ADVANTAGES – German made – auto-reverse (adjustable) – DTR technical documentation – used shredder, very good condition Net price: 75,900 PLN Net price: 18,070 EUR depending on EUR/PLN rate 4.2 (Prices may change in case of higher fluctuations)

Condition: used, total length: 1,800 mm, total height: 2,050 mm, total width: 1,400 mm, Empty weight: 1.000 kg Price: On request Shredder  Hopper opening: 950mm x 700mm (lxw) Ljdpfx Aljxa D Iijmorr overall size: 1620mm x 1370mm x 215mm (lxwxh) Motor:  50Hz 11kW - Documentation available: No - CE certificate present: No - Transport dimensions: 1800mm x 1400mm x 2050mm (l x w x h) - Transport weight [kg]: 1000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Colour: Grey Price: On request Shredder Dreher S26 Type: S26/26 No.: K4727 Hopper opening: 250 mm x 400 mm Motor: 4kW 380Volt 8.3Ampere - Documentation available: No - CE certificate present: No - Serial number: K4727 - Main motor power [kW]: 4 - Number of shafts [pcs.]: 1 - Opening width [mm]: 250 - Opening length [mm]: 400 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lrjdeyfguqjpfx Almor Yorick Diebels

Condition: new, functionality: fully functional, Year of construction: 2026, Product overviews of Waste Industrial Timber Wood Pallet Double Shaft Shredder Shredders can generally be used to shred hard-to-break plastics, rubber, large tires, large nylon materials, large pieces of fishing nets, fibers, paper, wood, electrical devices, cables, PET bottles, cardboard, wood, plastic barrels, etc. Solid objects. The main function of the equipment is to squeeze the bulk materials and large-diameter drum metal materials that are not convenient for transportation through the shear of the shredder, and shred them into sheets that meet the requirements. The main structure of the double-shaft shredder is a feed hopper, a knife roller, a driving device, a bearing, a hydraulic system, and an electric control box system. Working principle: All kinds of waste materials enter the shredding chamber through the feeding hopper. The double-knife rollers do relative rotation to shred and cut the materials, and then the materials are discharged from the shredder to achieve the shredding of large pieces of materials. Applicable materials and fields Double shaft shredder is one of ethential equipment for waste recycling in following fields and materials: +Bulky Waste: Sofa,Mattress,Chair, Funiture,Windows,etc +Industrial Waste: Textiles,Leather,Rubbers, Leathers ,General industrial waste,etc +Hazardous Solid waste: Medical waste,Paint sludge,Radioactive waste,Hazardous waste oil drum,Jumbo bag,etc Lsdpfxjvn D I No Almsrr +Paper waste: Carton,Cardboard,Book,Newspaper,Document,Brochure,Packaging paper,etc +Garden waste: Branch, Wood pallet, Trunks, Boards,etc +Domestic waste +Biomass straw: Straw, Bamboo, Corn, Sorghum straw, Bean straw, Fruit shell, Palm shell, etc +Scrap metal: Car Shell, Aluminum casting, Household appliances, Scrap light metal,Automobile hub,etc +Paper mill waste: Paper mill slag, Paper mill rope, Paper mill offcut,etc +Wood pallet, scrap furniture, waste chair, tree roots recycling, etc. Double shaft shredder main body: The main body is welded with excellent steel plate to ensure the stability of the equipment under heavy load for a long time. Bearing: The bearing seat is split and easy to disassemble, and the movable knife, fixed knife, bearing and other parts can be quickly removed, and it is easy to maintain and replace the knife. The sealing structure can avoid the contact of broken materials and grease, and can also protect bearings and gears when handling liquid materials.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Industrial WEIMA extraction and briquetting setup removed from a working environment. Used from new by the same company and regularly serviced/maintained. Includes: WEIMA TH 520 extraction/filter unit WEIMA WL8 shredder Briquette press Blower system Control cabinet Associated ducting/pipework Model: TH 520 Year: 06/2010 400V 3 Phase 7.5kW 50Hz Weight: approx 1.2 tonne Joinery workshops Furniture manufacturing MDF/wood waste processing Recycling operations Biomass fuel production System is currently operational and can be demonstrated working. Lrsdpfx Aszgclaelmer Buyer responsible for removal/transport. Located: South Wales Message for more details, viewing or video walkthrough. Open to offers

Condition: ready for operation (used), Year of construction: 2022, We are offering this used shredder for sale, manufactured in 2022. Lrjdpfxjztxpbe Almor Motor type: AMMF 90L BA4 Frequency: 50 Hz Power: 1.5 kW Voltage: 230 V Current: 9.3 A If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 3101, power: 22 kW (29.91 HP), filling opening width: 500 mm, filling opening length: 800 mm, Shredder for wood waste / plastics / paper / cardboard / ... Nails in the wood are no problem either... READY FOR USE Lsdpfx Alozvmphsmorr

Condition: ready for operation (used), Weima WLK 12 Specifications Motor Power: 100 hp (75 kW) Ljdpfx Ajw U Txujlmorr Feed Opening (Infeed): approximately 6.2′ × 5.9′ (1,920 mm × 1,800 mm) Rotor Diameter: ~14.4″ (368 mm) Rotor Width / Length: ~47.2″ (1,200 mm)

Condition: used, Year of construction: 2003, operating hours: 10,120 h, total length: 1,800 mm, total height: 1,700 mm, total width: 1,200 mm, Colour: Grey Empty weight: 1.300 kg Price: On request Shredder Untha LR 630 Year of construction 2003 Input opening: 624 x 792 mm Lrjdpfewh Na Nsx Almsr Throughput speed: material and sieve dependent Rotor diameter: 248 mm Rotor speed: 86 - 96 rpm Engine power: 15 kW Cutting system: 17 knives Sieve diameter 24mm Transport dimensions 1800*1200*1700mm (L*W*H), Weight 1300kg - Year: 2003 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: LR632318 - Operating hours: 10120 - Transport dimensions: 1800mm x 1200mm x 1700mm (l x w x h) - Transport weight [kg]: 1300kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), functionality: fully functional, machine/vehicle number: see pictures, overall weight: 260 kg, fuel type: gasoline, JCB wood chipper model CH150120PE with JCB-E460PE petrol engine (457 cc) and chipping capacity 120 mm. Specifications: Brand: JCB Model: CH150120PE Engine: JCB-E460PE, 4-stroke OHV, 1 cylinder Engine displacement: 457 cc Power: 15 hp Starting method: electric and pull start Drive: belt Lrjdpfx Alozvf Rwjmsr Chipping capacity: 120 mm Feed hopper: 588 × 440 mm Feed opening: 278 × 167 mm Disc diameter: 600 mm Blades: 2 cutting blades + 6 chipping blades Disc speed: 1800 rpm Fuel tank capacity: 6.5 litres Documentation: Manuals: JCB-CH150120PE and JCB-E460PE (EN)