Used Stl for sale (563)

Condition: new, Brinkmann STL143 / 540-MVX+467 submersible pump, serial number as per photo, unused, 100% functional, scope of delivery as per photos Ndsdpfxji D Hlcs Aa Esf

Condition: used, Year of construction: 2011, functionality: fully functional, For sale: 4 temperature control units by Plasma: Medium: water Temperature: max. 90°C Heating capacity: 9 kW Cooling capacity: 30 kW Nodpfx Aaox Ek Rdj Eedf Alarm function Flow measurement Automatic water change function PT 100 sensor Interface for TTY 20 mA via 9-pin D-Sub connector

Condition: excellent (used), Year of construction: 2013, Type: STL-350 CE Serial number: 869.898 Year of construction: 2013 Model: left hand side Product height: max 350 mm Cutting width: max 275 mm Blade length: 2500 mm Ndjdpfxsrallgj Aa Eef Power: 3 x 400V, 50Hz, 2.2kW Dimensions: 850 x 850 x 1650 mm Weight: 210 kg With sliding table

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2011, loading space length: 13,870 mm, loading space width: 2,550 mm, Loading height 85-90 cm Nodpexptnqofx Aa Eedf Last axle = steering axle Tyres 215/75R17.5 NO TÜV / NO SP "Subject to errors, misprints, and prior sale"

Condition: excellent (used), Year of construction: 1980, I will sell a brush sander in good condition. - 1500/3000rpm. Njdpfxjv T Tq Ro Aa Eedf - 380V.

Year of construction: 2013, condition: like new (used), functionality: unexamined, machine/vehicle number: 130365 bis 130368, The heating units were acquired as part of a package in conjunction with a machine takeover from VW/Dieffenbacher and are not required. It is assumed they have very few operating hours (previously used in a laboratory setting). Ndodjx An Eqspfx Aa Eef

Condition: new, Brinkmann STL143 / 540-MVXZ+486 submersible pump 60 Hz, serial number as per photo, unused, 100% functional, scope of delivery as per photos Nsdpfx Aasi D Hlke Eedf

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma, model "Primus", is available for sale with the following technical specifications: Medium: water, Maximum temperature: 150°C, Heating capacity: 9 kW, Cooling capacity: 30 kW, Special equipment: reinforced pump K6 at 60 l/min up to max. 6 bar. The pressure booster pump is used to increase the cooling water pressure during filling; this is necessary if the system pressure is higher than the cooling water pressure. PT 100 sensor. Interface: On/Off, Alarm, PT 100, Temperature monitoring. Nodpfx Aaox Eg T Es Ejdf

Condition: used, Brush deburring machine, tube deburring machine RSA type STL 1 Year of manufacture: approx. 1990 Brush diameter: 250 mm Brush width: 25 - 60 mm Speed: 1430 / 2870 rpm Power: 2 / 3 kW Mains connection: 380 Volt, 50 Hz - Material support - Extraction connection Ø 75 mm Space requirement L x W x H: 650 x 550 x 440 mm Weight: 100 kg Good condition Nodoxpqy Repfx Aa Ejdf

Condition: good (used), Single TL 1-12-B10/20-TKN6 Water Temperature Control System Areas of application: • Temperature control in plastics processing • Tool and mold making • Chemical industry • Testing and laboratory applications Temperature range up to 90 °C Max. external volume 61 l Heating capacity 12 / 18 / 24 kW Cooling capacity 35 kW (20 °C supply) / 100 kW (15 °C cooling water) Max. flow rate 200 l/min Max. discharge pressure 3.8 bar Pump motor power 3.0 kW Circulating medium connections G 1¼" Cooling water hose connections 18 mm Dimensions (L × W × H) 690 × 400 × 880 mm Njdpfx Aexl A Daea Eedf Weight approx. 75 kg Heat transfer medium: Water For detailed technical data and processing instructions, we recommend We strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more items – new and used – in our shop! International shipping costs upon request!

Condition: excellent (used), Single Nodsi A H Ipopfx Aa Esdf STL 1-12-B10/20-TKN6 Temperature control technology

Condition: refurbished (used), For sale is a K+G weather 90L bowl. This machine is currently still in the overhaul. Information: Cutter K+G Wetter 90 STL. CE-compliant design Highest running smoothness due to solid, stainless clad and bottom closed machine column Easy cleaning due to slanted outer surfaces Machine feet adjustable and vibration damped Main switch and electrical control integrated in machine housing Njdpfx Asg Typ Tsa Eedf Centrally located control panel Temperature sensor for highest measuring accuracy mounted directly in the cutting chamber Adjustable blade shaft speed from mixing to maximum speed Mixing speed forward and reverse Electric knife shaft brake Errors excepted and subject to prior sale. All information is non-binding. The accuracy of the information and prices are not guaranteed. A warranty and / or liability is excluded. Until full payment, the machine remains our property.

Condition: used, TECHNICAL DETAILS - Number of axes : 11 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Travel : 320 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 8 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 8 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 1 LOWER TURRET - Number of positions : 10 - Number of motorized positions : 10 - X/Z stroke : 115/120 [mm] - Y stroke : 100 [mm] - Live tools speed : 6000 [rpm] Nsdpfx Aouhawbsa Esdf - Live tools power : 1 [kW] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 9 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] SECONDARY OPERATION - Number of positions : 4 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 40 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3600 X 2200 [mm] - Machine height : 1780 [mm] - Machine weight : 4600 [kg] EQUIPMENT - CNC : Siemens 840 D - 3 colors status lamp - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor - Coolant tank * with high-pressure pump * with cooling unit for coolant - Bar loader : LNS HYDROBAR MINISPRINT - Oil mist extractor : DONALDSON - Cooling unit - Fire extinguisher * - Electric transformer - Long part device - Number of turning tool holders : 10

Year of construction: 2025, condition: new, We manufacture new row cleaners according to customer requirements. Ndodpfx Ajxrcyhja Ejf

Condition: ready for operation (used), Kistler 5877A0 maXYmos high-end process monitoring system SN:4853937, used, in good condition, 100% functional, delivery as per photos. Ndedpex Et Dajfx Aa Esf

Condition: good (used), Year of construction: 2003, Kistler U1000H Year of manufacture: 2003 Rotational speed: 0-70 cm/min Motorised adjustment + rapid traverse Weight: 580 kg Nsdpjx Ed Rbsfx Aa Eedf Tube diameter: 28-800 mm Max. load: 2000 kg 380 Volt Dimensions (approx. in mm): 2480x1700x1050

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 50 h, table length: 600 mm, table width: 1,000 mm, overall weight: 300 kg, total width: 1,480 mm, total height: 900 mm, warranty duration: 1 months, Equipment: documentation/manual, fume extraction, type plate available, Technical specifications: - 80 Watt Synrad CO2 laser source - Machine dimensions: 1480x900x1120 mm - Working area: 1000x600 mm - Max. workpiece height: 230 mm - Aluminum honeycomb cutting table with vacuum function - 2'' focus lens incl. focusing gauge and nozzle - Optional lens set: 1.5'' focus lens - 2.5'' focus lens - 4'' focus lens - Clean-Tech dust protection system - Servo motors (max. 3.2 m/sec) - Autofocus with Microsonic sensor - Assist air incl. compressed air compressor - LED interior lighting Ndsdpfexvb Eksx Aa Eof - Laser class 2 - Power supply 230V - Weight 300 kg - JL Cockpit laser software - JustAir POR extraction system to JL 10.6 extraction with 640 m³/h performance

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, resolution (max.): 1,000 dpi, laser power: 80 W, operating speed: 3,200 mm/s, table length: 600 mm, table width: 1,000 mm, machine/vehicle number: JL2022059, TECHNICAL DETAILS Table length: 600 mm Table width: 1,000 mm Cutting speed: 21,120 mm/min Operating speed: 3,200 mm/s Workpiece height (max.): 230 mm Laser power: 80 W Resolution (max.): 1,000 dpi Njdex E Snwspfx Aa Ejdf Laser type: CO2 laser MACHINE DETAILS Power supply: 230 V Dimensions & Weight Dimensions: 1,480 x 900 x 1,120 mm Weight: 300 kg EQUIPMENT Compressor JustAir PRO accessories Rotary engraving device for JL 7.5 and 10.6 Aluminum grid cutting table with vacuum function LED interior lighting Autofocus with Microsonic sensor Computer system with Mini PC 8th Gen Intel i7-8569U for machine control Table (SogesFurniture BHEU-101-OK) Chair (WOLT Bar stool BH113an) Mounts and peripherals (Samsung Curved Monitor C24F396FHR, 24 inch) Compressed air kit, extension for external compressed air incl. compressor and all hoses.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Kistler Pipe Rotator U 500, 2 units available Price is per unit Speed infinitely adjustable via foot pedal control APPLICATION For clamping, rotating, and tilting workpieces with round cross-sections during manual or automatic welding, primarily in pipeline construction (prefabrication and on-site assembly) as well as in apparatus engineering. Alongside a high degree of efficiency (eliminates the need for an assistant and interruptions when rotating segments), there are also qualitative improvements: no weld seam interruptions, consistently optimal welding position. DESCRIPTION Njdexxvr Rjpfx Aa Eedf The stator, constructed as a solid-walled design, houses both the electrical control system and the tilting drive. Tilting is manual via hand crank (U 150 and U 500), (electromechanical tilting is standard for U 1000); for U 500, tilt angle is approx. 135°. Electromechanical tilting is also optionally available. The tiltable section includes the drive and roller housing, clamping column, clamping arm, and clamping roller. The unit is also available in a non-tiltable version under the model designations U 150 H, U 500 H, and U 1000 H. In general, with all U-series machines, the drive and electrical control are securely housed within the stand or roller housing.

Condition: used, Technical details: diameter: Nr.1: ca. 6 mm Nsdpfxou Nw Snj Aa Eedf diameter: Nr.1: max. 25 mm connection electric: 400 V motor: Getriebemotor / gear motor total power requirement: 0,25 kW weight of the machine approx.: ca. 120 kg space requirements approx. LxWxH: 0,85x0,6x0,1,0 m Wire Peeling Machine Application: peeling of electric wires to be processed parts: wires with PVC coat / rubber coating wire feed via angular rail 40mm on a length of 600mm infeed manual driver roller dia=80x21mm serrated copy of manual is available i.D. *

Condition: ready for operation (used), Kistler 5877AZ000 maXYmos monitor for demanding curve analysis SN:4834063, used, in good condition, fully functional, scope of delivery as per photos Nsdpsx Et Dgofx Aa Esdf

Condition: used, Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Manufacturer: Hengstler, temperature controller -Type: West 6600 -Article No.: 0906 Z220000 S -Number: 6 controllers available -Price per piece -Dimensions: 120/50/H50 mm -Weight: 0.2 kg/piece Ndjdpfstuycvsx Aa Esf

Condition: used, Absolute rotary encoders, encoders, rotary encoders, encoders, absolute rotary encoders, absolute encoders, function encoders, resolvers, resolvers -Manufacturer: Hengstler, encoder with cable and connector -Type: R176TD/500ED.4A25KF-FO 0 533 271 Ndsdpfoldk Igox Aa Esf -Voltage: 10-30VDC -Number: 2x encoder available -Price per piece -Dimension: 155/120/H80 mm -Weight: 0.7 kg/pc.

Condition: used, machine/vehicle number: 1605, Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turning and tilting table, welding turning device, welding turning tilting table -Manufacturer: Kistler, tiltable welding turntable with mobile base - Turntable: Ø 400 mm Nsdpfxeh D Il Tj Aa Ejdf -Speed: 0.08 to 6.3 rpm / 0.01 to 8m/min at Ø 400 mm - Direction of rotation: right/left rotation -Number: 1x available -Total dimensions: 740/580/H630 mm -Weight: 145kg

Condition: used, Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver Nodpfxoqv Hqke Aa Esdf -Manufacturer: Hengstler, rotary encoder with cable and plug -Type: R158-02000EK.42KD 0 522 166 -Voltage: 10-30VDC -Shaft: Ø 10 x 20 mm -Quantity: 1x encoder available -Dimension: 160/70/H80 mm -Weight: 0.4 kg