Used label systems for sale (133)

Year of construction: 2000, condition: used, - 5 printing units - 1 flexo coating unit - 6 UV drying units (air-cooled) - Rotary die-cutting unit Gjdpfsy H U Uiex Ahmsbr - GAP Master - BST video web monitoring system Fully rotary, 355.6 mm Maximum web width: 340 mm Minimum web width: 120 mm

Condition: used, Year of construction: 1988, - Processing - 4 printing units (letterpress) - UV coating Gedpfx Ahszq U U Iemjbr - Die-cutting - Winding

Condition: used, The Lemorau CT 1500 is a manual core cutter. It offers quick and easy conversion for various core diameters and wall thicknesses. The CT 1500 is very easy to operate: after the core has been slid onto the mandrel, the operator adjusts the end stop, which determines the width of the core cuts. The operator then presses the start button, lowers the knife using the handle, and cuts the core. - Maximum core length up to 1500 mm (59”) - Standard core diameters 25, 40, 50, 76 mm (1”, 1.57”, 2”, 3”) - Other sizes up to 152 mm (up to 6”) available as an option - Maximum measured cutting length 330 mm (13”) - Maximum wall thickness 6 mm (0.23”) for cardboard - Two-hand operation for operator safety Gbsdpfx Aszq U Uzjhmjr

Condition: used, The GM PN100S model is an automatic core cutter for cores with a maximum length of 100 cm. Gedpfxezq U Uns Ahmjbr The device is operated via a touch display. Max. wall thickness: 10 mm Core inner diameter: 25 mm (1") - 120 mm (4.7")

Year of construction: 2019, condition: used, Technical Data: • Working width: min. 20 mm, max. 250 mm • Winding diameter: max. 510 mm • Core sizes: min. 1” to max. 3” (up to 6” with adapter) • Compressed air supply: 6 bar • Web tension: 1–21 N Equipment: • Base frame with two servo motors • 2 pneumatic winding shafts • Web tension system via dancer roller • Splice and label defect detection • Splice table • Measuring roller • Counter • Operation via HMI touchscreen with digital handwheel Features: • Bidirectional winding • Inside and outside winding • Winding tension control: diameter-dependent or independent • Fully reproducible winding results • Integrated job memory (recipe management) • Counter for labels, running meters and diameter Performance Model Gepard 500 Speed: 500 m/min (depending on material and winding diameter) Web width: 250 mm Guide rollers: approx. 80 mm CFRP Counter: Diameter, running meters, label counter with ultrasonic sensors for “clear-on-clear” labels Splice detection: Yes Gedpfezq U Syex Ahmjbr Check for missing labels: Yes Camera upgrade: Possible Printing Module of the HR Series Printing Module: Rea-Jet HR Series, up to 2 print heads, 25.4 mm printing width when supplied with one print head (12.7 mm printing width) Unwinding shafts: CFRP encoder roller (particularly suitable for thin films) with integrated encoder Speed: 60 dpi / 300 m/min; 600 dpi / 30 m/min Front and back printing: Yes Register accuracy: +/- 0.3 mm Ink: DCV2 Splice stations: Fully automatic splice stations for uninterrupted printing Software: Error-free start and stop of the printing process in bidirectional operation. Antistatic bars: 2 DC antistatic bars (one for the front and one for the back) Inspection System HQ 5050 General: Base plate, control unit, 40-inch HD LCD monitor, lighting system, high-performance image processing computer Available Algorithms: • Print image inspection • 2D code detection (only with > 4-MP camera), minimum size 10 mm / single element 0.6 mm / QR code / Micro-QR / Micro-PDF • Barcode capture (only with 4-MP camera), minimum size 0.6 mm / JAN/EAN/UPC / Code39 / Codabar / ITF / Code93 / Code128/GS1-128 / GS1 DataBar / Pharmacode / OCR capture (only with a camera resolution of > 4 MP) • General distance measurement • Data capture in CSV file Lighting: • Top light dome with glare-free illumination and high-performance LED (32,000 Lux) • LED flat dome backlight (30,000 Lux) for transmitted light inspection Camera: • 5-MP QSXGA color camera • 2,448 x 2,048 at 200 x 167 mm > 310 dpi • Min. defect size 0.3 mm • Approx. 160 m/min (100 x 100 mm label) Technical data according to user (without guarantee)

Condition: used, Set of dual setups on rolling stand. Dual print heads allows for the marking of two product lanes Great for printing dates or codes on virtually anything, from plastic bottles to plastic bags to paper Stainless steel casing Stand mounted with casters Additional Details Gbjdpfsc Skirsx Ahmjr Voltage: other Voltage: 100-240 Phase: 1Ph Hertz: 60Hz

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added according to customer requirements. The MEBR+ operates in full rotation and semi-rotation modes. The semi-rotation mode is suitable for small print runs, while the full rotation mode is ideal for large print runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and deceleration phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system, which ensures excellent web tension control when the machine operates in semi-rotative mode. Standard features: - Maximum rotation speed 200 m/min (656 ft/min) – label stock - Maximum rotation speed 120 m/min (394 ft/min) – die-cutting, precision fit - Maximum semi-rotation speed 40 m/min (131 ft/min), depending on the plate size – die-cutting, precision fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter, as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of rotary knives with lateral adjustment - 2 interchangeable pneumatic unwinders with a diameter of 25, 40, and 76 mm (1, 1.5, 3 in) - Detection of paper and matrix tears - Winding upon label entry/label exit - Remote support via internet connection - Automatic stop at the end of the parent roll with programmable end-of-roll function - Semi-automatic winding - Foot pedal for step-by-step machine operation - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotation mode - Die-cutting repeats 41.30 – 371.00 mm (1.6 – 14.6 in) – semi-rotation mode - Maximum winding diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwinding diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 anti-static bar 1 "Clear-on-Clear" sensor 1 corona treatment 1 speed package (80 m/min in semi-rotation mode) 1 revolver unwinder Gedpfxjzqnxte Ahmsbr 2 flexo unit for spot coating with rotating register 1 web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30 – 371.00 mm (1.6 – 14.6 in) – semi-rotary mode approx. 700 die-cutting sheets An MAHO extraction system for the trimming waste is available as an option at an additional cost!

Year of construction: 2012, condition: ready for operation (used), Labelling machine Gbodpfxed A Hckj Ahmor Built in 2012

Condition: used, Small-format inkjet printer -Machine is sold as is, without testing, as a source of spare parts- Gjdecbmpuepfx Ahmjbr "The proven products in the Videojet EXCEL family mark all surfaces continuously, non-contact, flexibly, and extremely reliably. Already, 200,000 Videojet systems are in use worldwide in production facilities, printing variable data daily! All printers in the EXCEL family have an RS-232/V24 data interface for integration into your production line. A sealed stainless steel housing protects against splashing water and corrosion (in accordance with industrial standard IP 65) and makes our EXCEL printers extremely resistant, even under the harshest production conditions. The backlit LCD display with clear lettering, available in many languages, is easy to read, even from a distance. The SUREPRINT software controls individual ink droplets, their flight characteristics, distances, and viscosity. It ensures a perfect print image through high user-friendliness."

Year of construction: 1998, condition: good (used), functionality: fully functional, Nilpeter Model: F3000 Gedjztqrnspfx Ahmobr Machine No.: F-2002 Year of manufacture: Approx. 1994–1998 Please note: The exact year cannot currently be confirmed due to a damaged machine identification plate. Printing process: Flexographic printing + Screen printing Flexographic printing units: 5 Screen-printing units: 2 Availability: By arrangement _____ TECHNICAL CONFIGURATION Printing Units • 5 flexographic printing units • 2 screen-printing units • Combination of flexographic and screen printing within one production line • Suitable for standard as well as specialty label applications • Possibility to apply high-opacity inks, whites, and special effects through the screen-printing units _____ Drying System • 5 UV drying units • 5 hot-air drying units • Combination of UV-curable and water-based ink applications possible, depending on substrate and production requirements • Flexible drying configuration for different materials and coating applications _____ Web Handling • Unwinding section • Web transport through the complete production line • Turnbar system • Delamination / relamination system • Suitable for reverse-side printing and multilayer label applications • Stable web handling throughout the production process _____ Laminating Section • Integrated laminating unit • Suitable for protective lamination • Suitable for multilayer label structures • Allows inline finishing without the need for a separate laminating machine _____ DIE-CUTTING AND CONVERTING The machine is equipped with an extensive converting section: • 3 rotary die-cutting stations • 1 additional die-cutting station for sheet delivery • Integrated sheet delivery • Suitable for multiple cutting, perforating, and converting operations • Flexible configuration for different label and converting applications _____ SHEET DELIVERY • Integrated sheet delivery system • Additional die-cutting station dedicated to sheet production • Enables the machine to produce both roll-to-roll and roll-to-sheet products • Additional flexibility for specialty applications _____ INCLUDED ACCESSORIES The machine is supplied with a considerable quantity of production tooling and accessories. Magnetic Cylinders • 10 magnetic cylinders Anilox Rollers • 21 anilox rollers Printing and Rubber Rollers • 5 rubber rollers • 10 printing rollers Additional Tooling • Various additional cylinders • 1 new slitting cylinder • Further tooling available with the machine The extensive tooling package significantly reduces the need for additional investment and supports a faster production start after installation. _____

Year of construction: 1996, condition: good (used), functionality: fully functional, GALLUS T 180 SCREEN AND LETTERPRESS LABEL PRINTING MACHINE WITH HOT-FOIL STAMPING, EMBOSSING, AND FLATBED DIE-CUTTING We are pleased to offer the following versatile GALLUS T 180, designed for the production and finishing of high-quality narrow-web labels. The machine combines three screen-printing units with one letterpress printing unit, UV curing, hot-foil stamping, embossing, and flatbed die-cutting. Thanks to the integrated unwinding and rewinding system, finished rolls can be produced directly within the machine in one complete production process. _____ MACHINE DETAILS Manufacturer: Gallus Model: T 180 Year of manufacture: 1996 Web width: 180 mm Printing processes: Screen printing and letterpress printing Printing units: 3 screen-printing units and 1 letterpress unit Availability: By arrangement _____ TECHNICAL CONFIGURATION Printing Units • 3 screen-printing units Gbodpfeztqp Tox Ahmjr • 1 letterpress printing unit • Suitable for high-opacity inks, solid colors, and detailed print applications • Combination of screen and letterpress printing within one production line Drying System • UV curing system • Immediate curing of inks and varnishes • Suitable for direct inline finishing and further processing Varnishing • Varnishing capability within the letterpress printing unit • Suitable for protective and decorative varnish applications • Inline finishing without the need for an additional standalone varnishing machine Decorative Finishing • Hot-foil stamping unit • Embossing capability • Suitable for metallic, decorative, and tactile finishing effects • Particularly attractive for premium and specialty label applications Web Handling • Unwinding unit • Rewinding unit • Controlled material transport throughout the complete production process • Finished rolls can be produced directly in the machine Die-Cutting • Flatbed die-cutting unit • Suitable for precise die-cutting of different label shapes and materials • Inline production from raw material to finished rolls _____

Year of construction: 2007, condition: good (used), functionality: fully functional, Printing and Coating • 5 letterpress printing units • 1 additional varnishing unit • UV drying system • Inline varnishing capability • Suitable for high-quality label and packaging applications • Precise reproduction of fine text, barcodes, screens and detailed graphics Web Handling • Unwinding unit • Rewinding unit • Automatic web-guiding system • Corona treatment system • Stable and controlled web transport throughout the complete production process Gbsdpfx Ahsztqlzjmer Laminating and Converting • Inline laminating unit • Suitable for the production of laminated and multilayer labels • Laminating section can be used independently • Separate operation possible together with one printing unit • Machine can therefore also be used as a dedicated converting and finishing line Die-Cutting and Finishing • Semi-rotary die-cutting unit • Slitting unit • Perforation unit • Inline converting and finishing capability • Flexible processing of different label formats and repeat lengths Quality Control • Camera inspection system • Continuous monitoring of print quality and web registration • Improved production control • Reduction of production waste and defective material _____ WHY THIS VIVA CODIMAG 340? • High-Quality Letterpress Printing The letterpress printing process provides sharp text, clean lines, strong color coverage and precise reproduction of small details. This makes the machine especially suitable for self-adhesive labels, pharmaceutical labels, cosmetic labels, food labels, barcode applications and other demanding narrow-web products. • Five Printing Units Plus Varnishing The machine is equipped with five letterpress printing units and one separate varnishing unit. This configuration allows multi-color labels to be printed and subsequently protected or visually enhanced with a varnish in one continuous production process. • Independent Converting Capability One of the most important advantages of this machine is the flexible configuration of the laminating and converting section. This section can be operated separately together with one printing unit, allowing the machine to be used as a dedicated converting line for: • Laminating • Varnishing • Die-cutting • Slitting • Perforating • Rewinding This provides additional production capacity even when the complete printing section is not required. • Inline Laminating Unit The integrated laminating unit enables the production of protected, multilayer or enhanced label products. Laminating increases the durability of the finished label and can improve resistance against moisture, chemicals, abrasion and mechanical stress. • Semi-Rotary Die-Cutting The semi-rotary die-cutting unit provides flexibility for different label formats and repeat lengths. It is particularly suitable for short and medium production runs where frequent job changes and flexible format handling are important. • Complete Inline Production Printing, varnishing, laminating, die-cutting, perforating, slitting and rewinding can be completed within one production line. This reduces material handling, minimizes intermediate production stages and improves overall production efficiency. • UV Drying Technology The UV drying system enables immediate curing of inks and varnishes. This supports high-quality production, stable print results and direct further processing of the printed material within the machine.

Year of construction: 2006, condition: good (used), functionality: fully functional, VIVA CODIMAG 340 5-COLOR OFFSET LABEL PRINTING PRESS WITH VARNISHING AND HOT-FOIL STAMPING We are pleased to offer the following well-equipped VIVA CODIMAG 340, designed for the high-quality production and finishing of premium labels. The machine combines five offset printing units with an additional varnishing unit, hot-foil stamping, semi-rotary die-cutting, and inline finishing equipment. Its versatile configuration makes it particularly suitable for wine and spirits labels, cosmetics, food labels, and other demanding applications requiring precise printing and decorative finishing. _____ MACHINE DETAILS Manufacturer: Codimag Model: VIVA 340 Year of manufacture: 2006 Web width: 340 mm Printing process: Offset printing Printing units: 5 offset printing units Additional unit: 1 varnishing unit Availability: By arrangement • 1 additional varnishing unit • UV drying system • Inline varnishing capability • Suitable for high-quality label and packaging applications • Precise reproduction of fine text, screens, and detailed graphics Web Handling • Unwinding unit • Rewinding unit • Automatic web-guiding system • Corona treatment system • Stable web transport throughout the complete production process Decorative Finishing • Hot-foil stamping unit • Hot-stamping equipment • Suitable for metallic, decorative, and premium finishing effects • Inline enhancement of labels without requiring a separate finishing process Converting Equipment • Semi-rotary die-cutting unit • Slitting unit • Perforation unit • Inline converting and finishing capability Quality Control • Camera inspection system Gsdpfsztqi Hsx Ahmjbr • Continuous monitoring of print quality and web registration • Improved production control and reduction of waste _____ WHY THIS VIVA CODIMAG 340? • Premium Offset Printing Quality The offset printing process is particularly suitable for applications requiring sharp details, fine screens, smooth gradients, and high-quality color reproduction. This makes the machine an attractive solution for premium labels in industries such as wine and spirits, cosmetics, pharmaceuticals, and specialty food products. • Five Printing Units Plus Varnishing The machine is equipped with five offset printing units and one separate varnishing unit. This configuration allows multi-color labels to be printed and protected or visually enhanced with a varnish in one production process. • Integrated Hot-Foil Stamping The hot-foil stamping equipment enables metallic and decorative effects to be applied directly inline. This adds significant value to premium labels and reduces the need for a separate offline finishing process. • Complete Inline Production Printing, varnishing, hot-foil stamping, die-cutting, perforating, slitting, and rewinding can be carried out within one production line. This reduces material handling, shortens production times, and improves overall production efficiency. • Semi-Rotary Die-Cutting The semi-rotary die-cutting unit offers flexibility for different label formats and repeat lengths. It is particularly advantageous for short and medium production runs, where frequent job changes and flexible format handling are important. • Integrated Corona Treatment The corona treatment system improves the surface tension of the material and supports better adhesion of inks, varnishes, and coatings on a wide range of substrates.

Condition: used, Small character inkjet printer -Machine: has not been checked and is sold as a spare parts carrier Gbjdpfob A H Ivox Ahmsr -Dimensions: 500/600/H1750 mm -Weight: 40 kg

Year of construction: 2022, condition: excellent (used), Weber Compact CC Labeller Applicator Complete with controller Year - November 2022 Godpfxetq E Rko Ahmsbr In excellent condition

Year of construction: 2001, condition: used, functionality: fully functional, - Web Width: 510 mm - Functions: - Slitting - Rewinding - Rewind Diameter: Up to 700 mm - Unwind Diameter: Up to 750 mm - Core Sizes: 3" - Slitting System: Scissor Gsdpfxew Edbce Ahmebr - Web Path: Roll-to-roll - Counting Options: Label and length counting - Web Guiding System: Included

Year of construction: 2023, condition: as good as new (ex-display), Feeder Media width min. 100 mm max. 216 mm Page size min. 76.2 mm max. 254 mm * Max. 1200 mm in sequential mode Media diameter max. 254 mm Core max. 76 mm Media weight max. 10 kg Laminator Media width Min. 80 mm Max. 195 mm Media size max. length 200 m or 210 mm Outer diameter Inner diameter max. 76 mm Max. outer media diameter: 200 mm max. inside: 25.4 mm Media weight max. 8 kg Cutter System gate cut with cutting plotter Motor Digital servo motor Cutting force 20 - 300 gf in 31 steps Max. Cutting area No R. mark: 203 mm x 300 mm R. mark: 186 mm x 1200 mm Gbedpfxst D E Aij Ahmjr Max. Cutting speed 600 mm / s General data Max. Media diameter separating unit 220 mm Core: 25.4 mm Number of slitters 3 Interface USB2.0 (High Speed) Network (Ethernet 10BASE-T / 10BASE-TX) Display LCD with 128 x 64 pt Power source AC100-120V, AC200-240V 50/60Hz (automatic change) Max. Power consumption 170 VA Operating conditions 10 - 35°C / 35-75% relative humidity (non-condensing) Operating conditions for guaranteed accuracy 16 - 35°C / 35-70% relative room humidity (non-condensing) Dimensions (WxHxD) approx. 1904 mm x 994 mm x 1297 mm Weight approx. 151 kg

Condition: good (used), Year of construction: 1995, Gallus R200B Manufacturer: Gallus Ferd. Rüesch AG, Switzerland Model: Gallus R200B Year: 1995 Configuration: 8-Color UV Letterpress Incoterm: FCA (Free Loaded on Truck) FGT Condition Rating: ★★★★★☆☆ (8/10) _____ Why this machine is of interest The Gallus R200B has earned an outstanding reputation within the label industry thanks to its robust Swiss engineering, exceptional print quality, and long service life. Even today, it remains a highly reliable production press for self-adhesive labels and specialty applications. A particular highlight of this machine is its extensive package of original Gallus tooling, including a large quantity of printing cylinders, anilox rollers, magnetic cylinders, and die-cutting cylinders. This significantly reduces the investment required for a new owner while providing maximum production flexibility from day one. _____ Technical Specification • 8 UV Letterpress Printing Units • Approx. 200 mm Web Width • UV Drying System • Automatic Unwinder • Automatic Rewinder • Rotary Die-Cutting Station • Matrix Removal System • Automatic Web Guide • Electronic Register Control • Touch Screen Operator Panel • Gallus Ink Control System • Pneumatic Web Tension Control • Calvatron Corona Treatment System • Complete Electrical Cabinet • Operator Platform _____ Included Tooling & Accessories • Extensive package of Printing Cylinders • Large quantity of Anilox Rollers • Large selection of Magnetic Cylinders • Numerous Rotary Die-Cutting Cylinders • Various Repeat Sizes • Tooling Storage Racks • Spare Tooling • Ink Roller Storage Rack • Electrical Cabinet • Corona Treatment Unit • Operator Platform _____ Main Advantages Gbjdpsznwqgofx Ahmsr ✔ Proven Swiss Gallus engineering ✔ 8-color UV letterpress configuration ✔ Excellent print quality for self-adhesive labels ✔ Extensive original tooling package included ✔ Immediate production capability ✔ Reliable mechanical construction with low maintenance costs ✔ Excellent availability of spare parts ✔ Ideal machine for label converters seeking a cost-effective production solution _____

Condition: good (used), Year of construction: 2021, Manufacturer: Duplo Model: PFi Blade B3+ Year: 2021 Incoterm: FCA, Germany (free loaded onto truck) FGT Condition Rating: ★★★★★☆ (9/10) Godoznun Aopfx Ahmebr _____ Why this machine is interesting The Duplo PFi Blade B3+ is a compact and highly versatile digital cutting table designed for short-run and on-demand production. It combines cutting, kiss-cutting, and creasing in a single operation, making it ideal for packaging prototypes, labels, greeting cards, folding cartons, and digital print finishing without the need for conventional dies. Its CCD camera registration system ensures excellent accuracy, while the automatic feeder allows for efficient unattended production. _____ Technical Data • Working size: 210 × 297 mm up to 400 × 600 mm • Material thickness: up to 1.3 mm • Paper weight: 120 – 400 g/m² (depending on application) • Cutting speed: up to 800 mm/sec • Cutting accuracy: ± 0.3 mm • Tungsten steel cutting blades • 3 tool heads: Cutting, Kiss-Cut, and Creasing • CCD camera registration system • Automatic pile feeder with 5 combined suction heads • Feeder capacity: 100 mm • Power supply: 220 V / 50 Hz / 20 A • Connected load: 4 kW • Dimensions (L × W × H): 2,540 × 810 × 1,060 mm _____ Included Equipment • PC with monitor, keyboard, and mouse • Cutting and control software • Permanent transferable software license • CCD camera registration system • Three tool heads (Cutting, Kiss-Cut, and Creasing) • Complete tool holders and accessories • Assorted spare blades • Operating manual and technical documentation • Data backup available • Separate vacuum table compressor included _____ Availability • Immediately available • Machine under power • Demonstration possible by appointment _____

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: AK2-SCBS201, input current: 230 A, For sale is a used ELS labeler/labeling station with a conveyor belt. The machine was acquired by us after we installed our own labeling system on our thermoforming packaging machine. The labeler was subsequently completely overhauled and tested for functionality. The system is mounted on a sturdy stainless steel/aluminum frame and features an integrated conveyor belt. The photos show labeling heads, roll holder, control panels, sensors, and mechanical adjustment options for adapting to different products or packaging. Data / Features: Manufacturer: ELS Type / Designation according to nameplate: AK2-SCBS201 Machine no. according to nameplate: 16615 / 2024 Labeling station with conveyor belt Gbsdszkucfepfx Ahmjr Height and position adjustment Stainless steel / aluminum construction Control panels on the labeling head Sensors included Completely overhauled Function tested Condition: used, ready for operation The machine is suitable for use in packaging lines, e.g., for labeling packaged products, trays, boxes, or similar items. Before use, the system should be adjusted to the specific product and adapted to the corresponding label format. Note: Technical data such as label width, label length, belt width, connection values, and exact dimensions can be requested separately if needed or checked on-site. Inspection and testing possible by appointment. Errors and prior sale excepted.

Year of construction: 1995, condition: good (used), Max. roll diameter, unwinder: 700 mm (Shaft 76) Godozn Azwjpfx Ahmebr Max. roll diameter, rewinder: 450 mm Max. web width: 330 mm Max. speed: 220 m/min Description: Unwinder, splicing table, web guiding system, cutting unit, rewinder, counters (labels or meters), missing label detection with visual inspection.

Year of construction: 1998, condition: excellent (used), Max. roll diameter unwinder: 750 mm (Shaft 76) Max. roll diameter rewinder: Gbodpfezn Ayyjx Ahmsr 320 mm Max. web width: 270 mm Description: Unwinder, splicing table, 2x web guiding system, cutting unit, rewinder, counters (meters), Nikka camera Camera Manufactured by: Nikka Research Deutschland GmbH Type: ALIS C2 Date: 2005 Description: Since May 13, 2026, the camera has only been working intermittently (outdated hardware). Although it could be repaired, the chances of success are slim; the manufacturer recommends installing a new camera system. Accessories: 1x Shaft rewinder 76 mm 1x Shaft rewinder 40 mm 1x Shaft rewinder 50 mm 1x Shaft rewinder 100 mm 10x razor blades

Condition: used, A Heidelberg cylinder press (OHT) has been converted and equipped with a die-cutting unit from PRACMATIC for printing labels on rolls. Gbodpfx Aezgi Tdshmer

Year of construction: 2021, condition: ready for operation (used), A complete GEW UV curing system for a Gallus Labelmaster LM 440 is offered. Max. UV output: 140W/cm, UV lamp housings: 11, including 9 housings with lamps and 2 housings for screen printing modules, Operating hours: approx. 2900h/lamp, HMI: for 10 stations, Control system: GEW RHINO HMI. Including 2 RHINO control cabinets, 2 fans, a complete exhaust duct system and mounting kit for the Gallus Labelmaster LM 440. An on-site inspection is possible. Gsdpfjzlt Rksx Ahmobr

Condition: ready for operation (used), One Gietz platen die-cutting and embossing press and one Polygraph free-arm wire stitching machine are offered. 1) One Gietz Presto platen printing, die-cutting and embossing machine, max. paper size X/Y: approx. 320mm/480mm, frame size X/Y: approx. 320mm/460mm, working area X/Y: approx. 350mm/480mm, max. paper size without additional equipment: approx. 330mm/470mm, capacity: approx. 2500strokes/h, flywheel revolutions per stroke: 8, flywheel diameter: approx. 725mm, flywheel width: approx. 50mm, working height: approx. 900mm, weight: approx. 1100kg. Inspection possible by prior arrangement. 2) Polygraph 781/1L50 RF free-arm wire stitching machine, year of manufacture: 1960, number of stitching heads: 1, max. stitching thickness: approx. 8mm, stitching arm length: approx. 500mm, front stitching arm width: approx. 10mm, inside staple crown length: approx. 12mm, max. stitching capacity: approx. 250stitches/min. Inspection possible by prior arrangement. Gbodpfezk Nb Asx Ahmsr