Condition: used, Year of construction: 1994, Max. passage height: 160 mm Sanding belt length, unit 1: 1900 mm Max. working width: 1350 mm Number of belts: 2 Belt, unit 1: Calibrating roller, grooved, rubber design Unit 1: Steel, grooved Sanding belt width, unit 1: 1350 mm Unit 2: Combination sanding unit Design, unit 2: Roller/shoe Control: Manual control panel, electric/pneumatic Belt oscillation: pneumatic Infeed height: fixed (top section moves) Table stroke: electro-mechanical Table display: mechanical numerical display Working height or feed table height: 900 mm Location: Nattheim Giodpfx Aoy Naq Uombsw

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical data: - Grinding unit can be swiveled using a hand crank - The machine stand made of welded steel guarantees high torsional rigidity and vibration-free operation - Oscillating grinding belt with separate gear motor for better grinding results - Oscillation can be switched on as desired Gedpjzk Nruefx Amboiw - Grinding pad with graphite coating for a longer service life of the grinding belt - Height-adjustable grinding table to utilize the entire width of the grinding belt - Additional table for grinding radii with integrated extraction ports - The sprung belt tension automatically compensates for belt length differences - With adjustable stops, it is ideally suited for veneer grinding - Veneer overhang can be easily ground down - With chassis - Power of oscillation motor: 0.11 kW - Connection voltage: 400 V - Mains frequency: 50 Hz - Grinding belt length: 2,640 mm - Grinding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Grinding area length: 800 mm - Grinding area width: 150 mm - Swivel angle of grinding unit: 0–45° - Work table length: 950 mm - Work table width: 450 mm - Work table height adjustment: 110 mm - Dimensions: 1,700 × 1,000 × 1,150 mm - Weight: 300 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Condition: fully inspected and serviced Equipment and technical data: - Incl. combined unit with contact roller and sanding shoe - with height-adjustable contact roller for calibration - with air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - with pneumatic belt tensioning device - with a rotating texturing brush on the discharge side of the machine - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Passage height: 150 mm - Main motor: 15 kW - Feed speed continuously adjustable 2.5 - 12.5 m/min. - with roller table at the infeed - with separate additional texturing brush Godpfx Aezlbpnombjiw - with roller table at the outfeed - with digital display for the electrically driven workpiece thickness adjustment - with automatic workpiece thickness adjustment - Dust extraction port 2 x 200 mm - Feed belt is in good condition

Condition: used, Year of construction: 2008, total length: 2,060 mm, total width: 830 mm, total height: 1,180 mm, Colour: Grey Empty weight: 566 kg - Year: 2008 - Documentation available: No - CE certificate present: No - Table length [mm]: 1000 - Table width [mm]: 400 - Sanding belt width [mm]: 200 - Sanding belt length [mm]: 3200 - Extraction nozzle diameter [mm]: 120 - Conveyor belt speed [m/s]: 13 - Min. tilting angle [°]: 0 - Max. tilting angle [°]: 45 - Transport dimensions: 2060mm x 830mm x 1180mm (l x w x h) - Transport weight [kg]: 566kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Godpfxeywlfyj Amboiw Yorick Diebels

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 2-Belt Wide Belt Sander - Usable working width: 1100 mm - Abrasive belt dimensions: 1120 x 2150 mm - Max. workpiece thickness: 160 mm - Steel calibration roller, Art. 018: 150 mm - Sanding shoe width: 50 mm - Motor power: 14.7 kW - Belt speed: 18/16 m/s - Feed motor power: 0.55 kW - Adjustable feed conveyor with infinitely variable speed: 4–20 m/min - Motorized height adjustment: 0.24 kW Gjdpoxz Ialefx Ambsiw - Mechanical belt oscillation "ECO GEAR PATENT SYSTEM" - 1 pc. drum brake for belt deceleration - Swiveling roller for belt tensioning - 3 pcs. rubber-coated pressure rollers - Emergency stop bar at infeed - Electronic workpiece thickness display - 2 extraction ports, Ø 160 mm - Automatic table positioning Additional options: - Electronically segmented sanding pad with 20 segments - Increased belt motor power to 14.7 kW instead of 11 kW - Frequency-controlled feed speed - Electronic machine function control with 7" touchscreen BASE MACHINE ACCORDING TO CE STANDARD Art. 029 IMPORTANT: New patented belt oscillation system 1. No valves 2. No light barrier 3. Not sensitive to dust 4. Energy-saving and environmentally friendly system Availability: Short notice Location: Holm

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Industrial cross-sanding machine for high-quality surface finishing of wood, veneer, and painted workpieces. The combination of a cross-sanding and longitudinal-sanding unit enables efficient and precise processing in a continuous flow. Processing units: 1 × Cross-sanding unit with pressure pad belt 1 × Longitudinal-sanding unit 1 × Brushing unit Technical data Technical data: Sanding width: 1,300 mm Maximum workpiece thickness: 140 mm Gisdpozinvijfx Ambew Working height: 780–920 mm Feed rate: 4.5–22 m/min Cross-sanding belt: 4,900 × 150 mm Pressure pad belt: 4,650 × 140 mm Longitudinal-sanding belt: 2,620 × 1,350 mm Brush roller: Ø 150 mm Workpiece vacuum clamping system: 7.5 kW Total connected load: 44 kW Machine weight: approx. 3,850 kg

Condition: used, functionality: fully functional, 0.75 kW Spray system Flap disc 150/70/25 mm, sisal/leather/synthetic fabric Giodpfeigaf Rsx Ambew Flap disc 150/70/25 mm, sisal/synthetic Flanges 70 mm reduced to 11 mm (2 pcs), metal Control panel on top 4 motors at 0.18 kW each for the brushes

Condition: reconditioned (used), machine/vehicle number: 9958, functionality: fully functional, Power connection: 380V, 7.3 kW Dust extraction: 1x 120 mm, 1x 180 mm Sanding table dimensions: 2850 x 1550 mm Sanding belt dimensions: 7820 x 150 mm Table height adjustment via handwheel Length x Width x Height: 4400 x 1700 x 1450 mm Giodjiau Tlspfx Ambew Weight: approx. 1100 kg

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, overall weight: 950 kg, Sanding belt length 2200 mm, sanding belt width 400 mm, table length 1200 mm, usable height 120 mm, sanding width 390 mm, sanding belt speed approx. 21 m/sec, feed speeds 6 - 11 - 16 m/min, main drive motor 7.5 kW, feed motor 0.26 - 0.55 - 1 kW, pneumatic belt oscillation and belt air-blast, frame support, chassis. Gisdpfx Aexq Ehxembew

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding width: 1,350 mm, SCM Wide Belt Calibration and Fine Sanding Machine Gjdpfxotwqn So Ambeiw Model: dmc sd 60 RCS 135 Technical Specifications: Working width: 1,100 mm Min./max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (HP) Gear motor: 0.45/0.8 (0.6/1.1) kW (HP) Feed speed: 4.5/9 m/min Standard equipment: - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore - 2nd position - Hard sanding pad with manual working height adjustment - Motor power for unit 1: 11 kW (15 HP) - Electronic ammeter for main motor indicating current draw - Electronic work height display - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Anti-kickback device at infeed before first unit - 60 Shore rubber feed belt - Roller table with two rollers at infeed and outfeed of working table - Feed belt with two speeds 4.5 / 9 m/min driven by gear motor - Automatic belt centering Including the following special accessories: 1 pc. version "B" for RCS with: pneumatic on/off for roller 1st unit “R” + pneumatic on/off for roller 2nd unit “CS” + “MESAR” elastic segmented sanding pad + pneumatic on/off for sanding pad unit + electronic programming unit “LOGIC 50” + electronic working height adjustment 1 pc. CE safety standards 1 pc. roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 pc. "RA" diagonally grooved steel contact roller, 1st unit 1 pc. main motor 15 kW 1 pc. abrasive belt wear optimizer 1 pc. LED interior lighting 1 pc. door with viewing window on rear side 1 pc. Logic SC control

Condition: reconditioned (used), machine/vehicle number: 10728, functionality: fully functional, Table size: 2300 x 900 mm. Gisdpfx Aoiyp Rfombjw

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 9673240, grinding width: 1,100 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 1,120 mm, Combination sanding unit with contact roller and air sanding pad Brush roller Pneumatic sanding belt tensioning Motorized thickness adjustment Technical data max. working width 1100 mm max. workpiece thickness 150 mm min. workpiece thickness 3 mm Sanding belt dimensions 1900 x 1120 mm Feed speed 5/10 m/min. Motor power sanding unit 15 kW Motor power height adjustment 0.50 kW Motor power feed carpet 0.5/1.0 kW Operating pressure 6 bar Air consumption approx. 20 l/min Suction nozzle 2 x 200 mm Weight approx. 2100 kg Machine width approx. 1750 mm Machine depth approx. 1700 mm Gsdpfstppzvex Ambeiw Machine height approx. 1900 mm

Condition: good (used), Code: 0437 Brand: CMC - ITALY Model: CL 300 - CE Standard Belt sanding machine with double gooseneck and 3 motors for joinery, furniture, custom-made furniture, window and door frames, doors, panels, metals, aluminium and various other applications – CE Standard Worktable length 3000 mm Worktable width 800 mm Vertical table stroke 670 mm Transversal table stroke 800 mm Gooseneck depth 700 mm Gedpfxezkhmke Ambeiw Gooseneck height 250 mm Pulleys diameter 250 mm N° 2-speed motor 3/4 Hp Table lifting/lowering motor 0,5 Hp Suction motor 0,5 Hp Belt width 120/150 mm Belt length 7850 mm Overall dimensions mm 4000 x 1550 x 1600 h Weight kg 490

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 2435059, total length: 1,500 mm, total width: 700 mm, total height: 1,450 mm, table height: 900 mm, type of input current: three-phase, table length: 1,000 mm, table width: 280 mm, height adjustment type: electric, input voltage: 380 V, grinding belt length: 2,580 mm, grinding height: 150 mm, Enorm (now Kündig) edge sanding machine in very good, used condition. LBK-D/solid – manufactured in 1995. The edge sanding machine was purchased from a dealer in 2022. The machine is being sold as part of the closure of our carpentry business. Gijdpjziupiofx Ambsw Price for pickup – delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, as well as for damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement. Fixed inspection dates are July 18th or August 1st from 10 a.m. to 2 p.m. at our facility in Stemwede.

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Gijdpfexy Tmujx Ambsw

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 1 belt sanding machine with combination unit with electronic segmented pressure bar Gijdpfozk N Ddex Ambow for sanding soft and hard veneers Calibrating and fine sanding of solid wood Calibrating of workpiece carrier plates Sanding of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings Sanding of barrier films with graphic operator terminal CNC-controlled thickness adjustment from 3-150 mm Activation of the calibrating roller via the terminal with patented CSD segmented pressure bar for compensation of workpiece tolerances up to 2 mm Sanding width 1100 mm Sanding belt length 2150 mm Sanding belt speed, frequency-controlled, approx. 2-18 m/sec Drive, sanding unit: 15 kW Feed rate: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min with belt extraction: 490 l/min Extraction nozzle: 180 mm Air requirement, sanding unit: 1800 m³/h Required air velocity: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2000 kg Dimensions (W x D x H): 1840x1670x2200 mm The machine will be fitted with a new feed belt. Availability: short-term Location: Röllbach

Condition: used, Used machine Year of manufacture: 1988 Condition: well-maintained Equipment and technical data: Giodjzk Ny Ejpfx Ambsw - Length of work tables: 1440 mm - Total width of the two work tables: 710 mm - Inclination adjustment of the work tables: 0 to 30 degrees - Working pressure: 6 bar - Abrasive belt length: 2170 mm - Width of the abrasive belt: 150 mm - Speed of the abrasive belt: 10 to 20 m/sec - Vertical adjustment of the oscillating unit: 125 mm - Air consumption: 25 NL/min - Electrical supply: 400 V / 2.9 kW Weight: 490 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1976, Used machine Year of manufacture: 1976 Equipment and technical data: - Underside sanding - Material feed via rubber rollers - Non-contact oscillation control - Quick-change pressure beam - Electromotive adjustment of the tool thickness with an easily readable digital display Gsdpfjzk Nyrjx Amboiw - Push-button control with contactor - Sanding width: 1350 mm - Maximum workpiece thickness: 150 mm - Sanding belt width: 1360 mm - Sanding belt length: 1900 mm - Feed rollers switchable: 10 + 20 m/min - Compressed air connection: 6 bar - Air requirement: approx. 180 NL/min - Motor power: 17.5 kW - Dimensions (W x D x H): 1800 x 1100 x 1520 mm - Weight: 2600 kg Availability: short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 1 wide belt sander with combination unit Equipped with electronic segmented pressure bar For sanding of soft and hard veneers Calibration and fine sanding of solid wood Calibration of workpiece carrier boards Removal of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitrocellulose, and polyester coatings Sanding of blocking foils With graphical operator terminal Giodpfx Amszk Nxzebjw NC-controlled thickness adjustment ranging from 3 to 150 mm Calibration roller can be engaged via terminal With patented CSD segmented pressure bar for compensation of workpiece tolerances up to 2 mm Sanding width: 1350 mm Sanding belt length: 2150 mm Sanding belt speed, frequency controlled, approx. 2–18 m/s Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air consumption: 15 NL/min Belt blow-off: 490 l/min Extraction connection: 180 mm Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/s Total power connection: approx. 17 kW Weight: approx. 2500 kg Dimensions (W x D x H): 2090 x 1670 x 2020 mm Machine will be supplied with a new feed belt Availability: by arrangement Location: Röllbach

Condition: used, Used machine Year of manufacture: 1981 Features and technical data: Motor 5.2/7.5 kW, pole-changeable 750/1500 rpm Belt speeds: 11 and 22 m/sec With attached blower motor 2.2 kW (2840 rpm, air flow 2400 m³/h) Table size: 2900 x 1400 mm Usable working length: 2700 mm Table stroke: 320 mm Belt dimensions: 7800 x 150 mm Including pneumatic pressure shoe with belt brake Extraction nozzle: 180 mm Air requirement: 2 l/min at 6 bar Weight: 1300 kg Availability: short notice Location: Röllbach Giodpfx Aozk Nxnembjw

Condition: used, Used machine Belt grinding machine Motor power: 4 hp / 3 kW Motor speed: 2890 rpm Table dimensions: approx. 2460 mm x 900 mm Manual table height adjustment Gedpfxezk Nvmo Ambeiw Transport dimensions: approx. 3600 x 1600 x 1450 mm Weight: approx. 500 kg Availability: short notice Location: Röllbach

Condition: used, Used machine Gedpozk Ntxefx Ambjiw Condition: consistent with age Table size: 2600 x 900 mm Max. usable grinding length: 2700 mm Belt length: 7800 mm x 150 mm 1100 mm throat on the right Motor: 5.2/7.5 kW with belt air blast nozzle Shipping dimensions: 4300x1650x1800 mm Weight: 1300 kg Availability: short term Location: Röllbach

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Condition: fully checked and serviced, including new feed belt Equipment and technical data: - Including combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air-cushion pressure pad controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating cleaning brush on the outfeed side of the machine - Belt oscillation via photoelectric sensor for automatic monitoring and regulation of lateral belt alignment, ensuring uniform belt wear - With roller table at the infeed - With digital display unit for the motorized workpiece thickness setting - With additional veneer sanding pad - Including 2x spare sanding pads - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Workpiece height: 150 mm - Main motor: 15 kW - Infinitely variable feed speed: 2.5 - 12.5 m/min - Extraction ports: 2 x 200 mm Gjdpfx Amszk Npmsbsiw Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2300 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: - Casadei Libra 10/95 TC machine with V2 special equipment package - Working width: 950 mm - Also suitable for smaller craft businesses for occasional use - Combination sanding unit with sanding pad for fine sanding - Standard equipment includes a diagonally grooved steel roller, Ø 120 mm, for calibrating - Fine adjustment of the working height - Clear control panel on the front - Robust tubular steel monoblock machine body, robot-welded, with work units mounted high up for maximum rigidity - Motorized height adjustment of the work table with digital display - Electronically controlled sanding belt oscillation - Carpet feed via geared motor with two speeds - Natural rubber feed carpet with negative profile - Flexible steel pressure bar in front of the first unit - Rubber pressure rollers, before or behind each work unit - Pneumatic belt tensioning per unit with decimal correction option for grit/belt thickness - Universally applicable for solid wood and veneer thanks to the combination unit - Entry-level model for smaller companies - Combination unit for calibrating and sanding: - Diagonally grooved steel roller Ø 120 mm with fine height adjustment - Hard sanding pad with graphite pad - Universal version for calibrating and sanding solid wood, chipboard and veneer - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel Giedpfx Aezk Nn Njmbsw - Electronic control system FOX 500 KTR - Table extension with 2 rollers at the infeed and outfeed - Automatic table positioning with button - Sanding belt length: 1525 mm - Sanding belt width: 970 mm - Working width max 950 mm - Feed rate: 4.5/9 m/min - Workpiece height: 4 - 170 mm - Motor 7.5 kW - Dust extraction connection 140 mm Dimensions: 1388 x 1545 x 1668 mm Weight: 600 kg Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Gedjzk Nm Sepfx Ambsiw Sanding width: 1100 mm Sanding belt length: 1900 mm Workpiece thickness: 3-150 mm Feed speed: infinitely variable, 2.5 - 13 m/min 1 steel contact roller 1 rubber-coated contact roller 1 sanding shoe unit: with air-cushion sanding shoe Drives: 1st sanding unit: 15 kW 2nd sanding unit: 15 kW 3rd sanding unit: 11 kW with infeed table extension with outfeed table extension Total connected load: 43 kW Extraction capacity: approx. 6750 m³/h Air velocity: 20 m/s Compressed air connection: 6-8 bar Air requirement: approx. 30 l/min Dimensions: 1750 x 2740 x 1890 mm Weight: 3100 kg Availability: short notice Location: 65439 Flörsheim