Wide belt sander

Heesemann EH 51.11

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 1 belt sanding machine with combination unit with electronic segmented pressure bar for sanding soft and hard veneers Calibrating and fine sanding of solid wood Calibrating of workpiece carrier plates Sanding of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings Sanding of barrier films with graphic operator terminal CNC-controlled thickness adjustment from 3-150 mm Activation of the calibrating roller via the terminal with patented CSD segmented pressure bar for compensation of workpiece tolerances up to 2 mm Sanding width 1100 mm Sanding belt length 2150 mm Sanding belt speed, frequency-controlled, approx. 2-18 m/sec Drive, sanding unit: 15 kW Feed rate: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min with belt extraction: 490 l/min Extraction nozzle: 180 mm Air requirement, sanding unit: 1800 m³/h Required air velocity: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2000 kg Gsdpfx Aleyulfmj Djbp Dimensions (W x D x H): 1840x1670x2200 mm The machine will be fitted with a new feed belt. Availability: short-term Location: Röllbach

Condition: new, Year of construction: 2024, TECHNICAL DATA Table size 1100 x 760 mm Table height 870 mm Milling spindle non-replaceable 30 mm Clamping height 140 mm Gedpfxefpb Nmj Al Djbp Height adjustment 125 mm Dust extraction port 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 Light Gray and RAL 5000 Violet Blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Table milling machine with a permanently installed, single-sided swiveling milling spindle for a swiveling range of -5° to +45.5° Positioning control for height and swivel adjustment with zeroing of the height and offset dimension Electronic position and speed indicators 4 speeds 3000 / 4500 / 6000 / 9000 rpm Belt quick-clamping device Push buttons for spindle start and stop Left and right rotation Milling cutter quick-clamping device Finely planed gray cast iron table with rigid frame support Control panel located below on rigid frame support Milling fence 216, total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum splinter guards Machine socket Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE compliant GS tested

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,000 mm, saw blade diameter: 550 mm, tilt adjustment saw blade: 45 °, Equipment: CE marking, documentation/manual, saw blade guard, Screen control; parallel fence; storage for 20 programs; double roller carriage 3000 mm; cutting width 1000 mm; cutting height 200 mm; table extension 840 mm; three selectable speeds: 3, 4, 5 rpm. Godpoy Nyuajfx Al Dobp

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with emptying function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking and integrated length control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer edging coils, as well as fixed lengths from 0.4–3.0 / 6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. ● 3 free slots for finishing units ● 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8–60 mm Min. workpiece width: approx. 75 mm Gbsdpsw I U Drefx Al Dep Min. workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0–2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: Surcharge for radius scraper unit with air nozzle + extraction Surcharge for surface scraper unit + extraction Surcharge for buffing unit EVA/PUR glue pot with emptying function Surcharge for diamond tools, height = 65 mm for pre-milling unit Riepe spray system (anti-adhesive) at the pre-milling unit Riepe spray system (cleaning spray before buffing unit) Pipe system with 90° bend + manual slide valve, installed on machine, D=200 mm Availability: short-term Location: Hochheim

Condition: used, Year of construction: 1997, Column reach: 630 mm Godpjwbqi Sjfx Al Dobp Feed rate: 7 m/min

Condition: used, Used machine Year of manufacture: 1988 Condition: well-maintained Equipment and technical specifications: - Length of worktables: 1,440 mm - Total width of two worktables: 710 mm - Worktable tilt adjustment: 0 – 30 degrees - Working pressure: 6 bar - Sanding belt length: 2,170 mm - Sanding belt width: 150 mm - Sanding belt speed: 10 – 20 m/sec - Vertical adjustment of oscillation unit: 125 mm - Air consumption: 25 NL/min - Electrical: 400 V / 2.9 kW Gbodpfxjxzl Aqo Al Dep Weight: 490 kg Availability: short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1997, incl. 3-roller feed motor: 2.2 kW, electric oscillation, belt speed: approx. 22 m/s, height-adjustable grinding table, table size: 1000 x 350 mm, continuously adjustable pivoting grinding unit from 0 - 45°, angle scale and mechanical lock, fold-up veneer edge sanding device, aluminum sanding shoe, height-adjustable radius sanding table, central dust extraction connection: 140 mm diameter, sanding belt: 3000 x 150 mm. Gedpfey Dd Igsx Al Debp Location: Nattheim

Condition: used, Year of construction: 1997, Belt width: 150 mm Belt length: Table size: Gedpjyffxzofx Al Dobp Veneer sanding unit: yes Oscillation: yes Tilting table: yes, 0°÷ 45° Extraction connection: 120 mm Motor power: 3 kW Machine length: 1440 mm Machine width: 800 mm Weight: 530 kg

Condition: used, Kündig Premium-1 1100 K Quality product made in Switzerland Constant Table Machine / Automatic Head Positioning Wide Belt Calibration and Fine Sanding Machine Combination unit with grooved rubber contact roller of proven hardness Contact roller height adjustable steplessly according to grit scale Pneumatic lifting/lowering of contact roller Pneumatic sanding pad with quick-change glide plate and precision pressure regulator Gbodpoy R Ruaofx Al Djp Spring-loaded, ground steel pressure roller at infeed Rubber-coated pressure roller at outfeed Sanding belt drive motor power: 11 kW Working width: 1100 mm Maximum workpiece pass-through height: 200 mm Feed speed: 3–15 m/min, steplessly adjustable Automatic workpiece thickness setting ENORMATIC quick adjustment with feed activation (for long workpieces) PLC control with touch screen and teach-in memory for automation and management of all working programs Infeed and outfeed tables with roller support Machine is workshop-tested and in VERY GOOD CONDITION First delivered in 2016 from a training workshop / on retirement Available from stock in Lieboch

Condition: used, Bütfering ECO 111 Electronic Wide-Belt Calibration and Fine Sanders Contact roller unit 85 SH CPS electronically controlled segmented pad Working width 1100 mm Terminal for various operating programs with selector switch and LED display Motor power approx. 11 kW Brush cleaning unit RTE additional compact roller table at infeed RTA additional compact roller table at outfeed Machine is FULLY REFURBISHED and in TOP CONDITION Available ex-stock Lieboch Gbodpfx Aey Rzf Ael Dop