Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, working width: 550 mm, power: 32 kW (43.51 HP), empty load weight: 3,000 kg, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! Guedpfxszk Dyyo Ahnjd TECHNICAL DETAILS Maximum working width: 550 mm MACHINE DETAILS Power: 32 kW Dimensions & Weight Dimensions (L x W x H): 1,700 x 2,700 x 2,900 mm Empty weight: 3,000 kg Control: Conventional Wet/Dry: Dry EQUIPMENT Station type 1: Belt sander CE marking

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, working width: 1,300 mm, TECHNICAL DETAILS Gusdpszktntefx Ahnjd Working width: 1,300 mm EQUIPMENT Vacuum conveyor belt Satinizing roller Brush roller EA dust extraction machine with high-pressure blowing system and rotating nozzles Ionization for statically charged dust Cross-grinding unit with belt blowing device Longitudinal grinding unit, infinitely adjustable speed, with belt blowing device Calibrating roller can be activated via the control panel

Condition: used, 120 x 2600mm sanding belt 950 x 270mm worktable with tilt Handwheel rise and fall to worktable Godpfjy H Itfjx Ahneud Mitre fence for table End table for bobbin / shaped sanding 3kw sanding belt motor 0.4kw belt oscillation motor

Condition: excellent (used), Year of construction: 2008, operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: 5202023, VIET 3 belt sander running very well. new bearing fitted in all motors and rollers 12 months ago so machine has full recon and can be seen running very smooth with no rattles or vibration when sanding 1.5mm from oak with 40 grit belt and can give excellent finish with 180 grit with 3rd belt. also have over 200 sanding belts mixture of 40 grit 80, 120, 150, 180 Grit with value of 7000 euro will give with sander for 3000 euro Gujdpfxsxtf Htj Ahnsd

Condition: used, Year of construction: 2016, Working width: 950 mm Min height of processed material: 3 mm Godpfx Aszd Uzzehnjud Max height of processed material: 160 mm Sanding belt size: 950x1900 mm Sanding belt speed: 18 m/s Feeding belt speed: 4.5/9 m/min Air consumption: 20/180 L/min Air pressure: 5.5 bar Air pressure for blowing off the sanding belt: 8 bar Extraction port diameter: 150 mm Main engine power: 7.5 kW Power: 400V Overall dimensions: Length: 1400mm Width: 1520mm Height: 1800mm

Condition: used, Year of construction: 2016, A versatile 2 head edge sander for solid timbe, mdf, chipboard, etc 1 - 80mm wide x 2450mm sanding belt with 2 speeds 700 / 1400rpm x 1.0 / 1.5kw with timed entry / exit, mechanical oscillation, and pneumatic belt tensioning 2 - Abrasive wheel sanding unit with automatic compensation for wear Sanding units can be used vertically or horizontally and have mechanical digital readouts for setting Manually adjustable top pressure beam with rubber rollers Track feed with variable feed speeds 1 - 18m/min Touch screen controller Gedpfx Ahozd Uzhensud Year - 2016 CE.

Condition: used, Year of construction: 2018, total width: 1,800 mm, total height: 2,200 mm, total length: 1,900 mm, Colour: Grey Empty weight: 1.500 kg Wide belt sander Boere Sandrite 1100C 380V Maximum sanding width 1100mm Maximum sanding height 150mm Sanding unit COMBI Engine 11kW (15HP) Transport dimensions:1800x1300x2100mm (LxWxH), Weight 1850kg - Year: 2018 - Documentation available: No - CE marking present: Yes Guedsyz U Dmjpfx Ahnod - CE certificate present: No - Serial number: 18.03.7507 - Number of units [pcs]: 1 - └ Unit 1: - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1100 - - Roller diameter [mm]: 150 - - Motor power [kW]: 15 - Max. working width [mm]: 1100 - Min. working height [mm]: 3 - Max. working height [mm]: 152 - Feed motor [kW]: 0.55 - Min. feed speed [m/min]: 2.5 - Max. feed speed [m/min]: 8 - Voltage [V]: 400 - Current consumption [A]: 28 - Fuse [A]: 32 - Power [kW]: 15.6 - Transport dimensions: 1900mm x 1800mm x 2200mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1996, operating hours: 12,171 h, total width: 2,300 mm, total height: 2,400 mm, total length: 9,000 mm, Colour: Grey Empty weight: 10.000 kg BOERE sanding line 'Compact' Elite Year of construction 1996 (CE) 12171 Operating hours Maximum height 150 mm Maximum width 1300 mm Elite BKKS 1300 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 183Amp Elite TKKS 1100 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 172Amp Revised by Boere in 2019 Godpfswnh Eqsx Ahneud - Year: 1996 - Documentation available: Yes - CE marking present: Yes - Bottom sander: - CE certificate present: No - Serial number: 98015305 - Operating hours: 12171 - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Contact roller material: Steel - Number of contact rollers [pcs.]: 2 - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Top sander: - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Number of contact rollers [pcs.]: 2 - Contact roller material: Steel - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Structuring brush present: No - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Voltage [V]: 380 - Current consumption [A]: 172 - Transport dimensions: 9000mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 1998, condition: used, Colour: Grey Polishing sander Löwer FA 4 S Year of construction 1998 Machine no. 9667 400V, 14.5Amp. 4x 0.37kW motor Working length 3000mm Dimensions: 5000x18050x1600mm (LxWxH), weight 550kg - Year: 1998 Gsdswnh Avopfx Ahnjud - Documentation available: Yes - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2026, CASADEI Libra 35 - Wide belt sanding machines in a two-belt configuration immediately available - from stock in 54634 Bitburg Technical data Sanding width 1100 mm Min. / max. working height 4 / 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Feed speeds 4.5 / 9 m/min Feed motor 0.33/0.55 kW Motor power, table adjustment 0.25 kW Power of drive motor 11 kW Electrical voltage 400 V Phase(s) 3 phases Mains frequency 50 Hz Length 1650 mm Width/Depth 1820 mm Height 1960 mm Image shows optional equipment Wide belt sanding machine in a two-belt configuration up to 1100 mm with numerous optional features for cost-conscious workshops Robust, tubular reinforced monoblock steel machine body with work units mounted high up for maximum rigidity Gsdscr S Ecjpfx Ahnsud User-friendly due to clear control panel on the front Motorized table height adjustment Digital display for the working height Electronically controlled sanding belt oscillation with reduced compressed air consumption Automatic star-delta start for the main motor Natural rubber feed belt with a negative profile Support table with two rollers at the infeed and outfeed of the feed belt Belt feed via geared motor with two speeds Flexible steel pressure bar in front of the first unit Rubber pressure rollers, before and behind each work unit Pneumatic belt tension per unit with decimal correction option for grain size/belt thickness Quality - Made in Europe RTC version 1st unit with grooved steel roller Ø 120 mm and fine adjustment for calibration 2nd unit Combination unit with finely adjustable working height for calibration and fine sanding with rubber-coated roller Ø 120 mm (45 Sh) and hard sanding shoe with graphite coating on a replaceable insert Scope of delivery: Work table height adjustment with electronic display of the working height Oscillation of the sanding belts with an electronic system Rubber-coated, grooved pressure roller at the infeed, 1° position with anti-rollback protection (C.E.) Star-delta start of the main motors Grooved calibration steel roller Selector switch for positioning the sanding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic belt centering Location: From stock in Bitburg - at a special price

Year of construction: 1988, condition: used, machine/vehicle number: 01910/88, Floor sanding machine, Eugen Laegler Type: Vibrafor Godpfxocb Au Sj Ahnsud Motor power: 1.1 kW Voltage: 220 V Vibrating sanding surface Dust bag Location: 54634 Bitburg – can be inspected.

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine should have. A solid, cast iron grinding unit with a powerful motor ensures maximum sanding performance. The work table, which is height-adjustable by spring pressure, allows for optimal belt utilization and safe operation. Optionally, a belt oscillation, stepless unit swivel, veneer sanding device, and an additional table for sanding work on the idler roller can be retrofitted. The machine is supplied with a range of sanding belts; a miter and angle stop are also included in the scope of delivery. Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Sanding belt speed: 22 m/sec • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Dust extraction diameter: 100 mm Location: In stock at warehouse 54634 Bitburg Guedpfx Ajd R Ev Dshnjd - free for collection - Can be shipped for an additional fee.

Condition: new, Year of construction: 2025, Kündig edge sanding machine Uniq-S Edition 30 Top condition - available immediately - - Complete sanding unit can be tilted up to 45 degrees by motor without any table adjustment - Feed system integrated in the machine carrier, transport belt 50 mm wide at the bottom, pressure rollers 60 mm diameter at the top, motor 0.55 KW, speed infinitely variable 3 - 15 m/min - Can be operated from both sides with flat and contact sanding side - Sanding belt size 200 x 2000 mm - Belt drive motor 3 KW, 380 V, 50 Hz - Oscillation stroke programmable 10 - 90 mm Gjdpfxovk R Ars Ahnoud - CE compliant/dust tested Standard version Kündig Uniq - S Accessories: - Q4 auxiliary table belt drive roller - Q6 semi-circular table belt drive roller - Z04 table extension Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Perfect-2 1350 RED-L Wide belt sanding machine incl. sanding version for intermediate sanding of coatings Special price for showroom machine - in-house trade fair machine - - Robust, space-saving W-wide belt sanding machine for the highest demands. - Constant working height thanks to adjustable upper part - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller in proven hardness - Contact roller level can be adjusted continuously according to a sanding grit scale - Electric raising/lowering of the contact roller according to the selected unit - Electronically controlled segment sanding pad - Entire sanding pad unit can be tilted 10 degrees - Parallel, spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between the sanding units and at the outfeed - 2 motors, 18.5 kW and 11 kW, 400 volts, 50 Hz - Motor-driven, finely adjustable height adjustment with digital display - Belt tension, control and oscillation are pneumatic - Compressed air consumption approx. 2 l/min - Optimal safety thanks to automatic emergency stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum device for the entire work table with additional perforations of over 200 mm for smaller workpieces - Automatic thickness adjustment over the entire working width - Over-thickness protection for workpieces with feed emergency stop and lifting mechanism - Continuously adjustable chip removal rate - Electronic feed control on the control panel, continuously adjustable from 3 - 15 m/min - PLC control with teach-in memory - Pneumatic belt control - Workpiece support with roller at the infeed and outfeed - Enormatic: Fully automated quick setting and feed release - Eco energy-saving mode - Fault diagnosis - Pass height 210 mm up to 18.5 kW - Sanding belt dimensions 1350 x 2000 mm Perfect - Equipment: High-quality, swiveling acrylic glass control panel - 10-inch touch screen - Industry control - Automatic pressure regulation and saving of sanding pad elements - Electronic compensation of sanding belt grit size - Operating and running hour counter Coating equipment: - Continuously adjustable sanding belt speed on the 2nd unit - Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process - Electronic sanding pad with a segment width of 22 mm - Additional sanding pad insert Additional options included in the machine: Gsdpfjk Dpp Sex Ahnjud Foldable outfeed table extension (without top) C10) LED package ASB5+AS3) ECS workpiece blowing system with fan Location: 54634 Bitburg - Available immediately -

Condition: new, Year of construction: 2024, The Uniq series is a full-fledged base model in our product range and shares all the characteristics that have made the Kündig edge sanding machine renowned in the market as a robust, versatile precision tool. Part of its extremely robust construction is the motor-driven oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and the possibility of motor-driven inclination of up to 45°. All common edge processing operations can be performed at the up to four sanding stations. Kündig Uniq edge sanding machine, front and rear Ingenious design – the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a range of intelligent functions and features. For example, in our machines, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation stroke, sanding belts can be used optimally over their entire width, without laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The tilting of the sanding unit is also conveniently done using a rotary switch and with the help of its own motor. The unit can be tilted between 90° and 45°. Thanks to the well-thought-out pivoting mechanism, the full oscillation is always available and simultaneous sanding on both sides is possible. The different table heights of the front and rear sanding stations also ensure that the belt is not used at the same height at the same time. Furthermore, the combination of the pivoting mechanism and the different table heights ensures that the distance between the sanding unit and the worktable remains minimal at every angle of inclination. Changing the belt is also quick and easy, taking only seconds. The four sanding stations 1. Sanding station: "Veneer side" The front sanding station is used for the precise calibration of materials and functions like a planing machine. The feed stop is adjusted using a rotary handle to set the material removal to within a tenth of a millimeter. Importantly, the stop is not tilted. The feed stop, sanding pad, and discharge stop are always parallel to each other. Rounding of workpieces is thus excluded. Fine adjustment of the sanding pad for grain compensation or setting to zero between stops and pad is possible via a handwheel. The massive worktable is fitted with sliding pads on this side. 2. Sanding station "Solid wood side" This station is ideal for sanding flat, angled, chamfered, or externally rounded workpieces. Again, the entire sanding unit oscillates. The belt runs across its entire width on a graphite surface that keeps it cool. On the solid wood side, there is also a mitre stop. Gujdpfsfig Rwex Ahned Supplied accessories: Half-round table Additional table with sanding rollers Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Heavy-duty machine stand guarantees high torsional rigidity and vibration-free operation. Improved sanding results through sanding belt oscillation via a separate geared motor. Oscillation can be switched on or off as desired. Veneer edge sanding device with fine adjustment included as standard. Grooved infeed guide rail for sanding veneer overhangs. Quick changeover from veneer to solid wood sanding. Height-adjustable sanding table to utilize the full sanding belt width. Height adjustment of the sanding table and swiveling of the sanding unit via handwheels. Height-adjustable auxiliary table with dust extraction for sanding radii. Optimal chip removal through dust extraction at the unit and the cross table. Automatic compensation of belt length differences through spring-loaded belt tension. Dimensions and weights Length approx. 1900 mm Width/Depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Dust extraction nozzle diameter 120 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 352 mm Work table height adjustment 210 mm Cross table height min. 730 mm Electrical data Power consumption 3 kW Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt running speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 220 mm Swivel range 0 – 45 ° Guodpfeff Ed Tsx Ahned Oscillation stroke 20 mm Availability: Short-term

Condition: new, Year of construction: 2026, The robust design also allows for the processing of longer workpieces. The grinding unit can be swivelled, making it suitable for use as an edge grinding machine. Large, balanced belt pulleys (225 mm) ensure low-vibration operation. Simple adjustment of the grinding belt. High belt speed of 17 m/s. Reversible rotation (right/left). Upper grinding platen with graphite coating. Grinding shoe with 4-point suspension. Equipped with a movable grinding shoe for grinding angled surfaces. Smooth-running work table, even under heavy loads from large workpieces. Optimal price-performance ratio. Additional ESE equipment: Standard with electric table height adjustment. Split table that can be folded out for special edge grinding applications. Godpsff Hdfefx Ahneud Drawer-type grinding attachment. Integrated work table lighting. Equipment details: Large, balanced belt pulleys (225 mm) ensure optimal and low-vibration operation. Belt speed: 17 m/s. Equipped with a swivelled professional grinding shoe for grinding angled surfaces. 4-point suspension. Standard with electric table height adjustment. Controls ergonomically arranged on a separate control panel. Standard with drawer-type grinding attachment. Split table that can be folded out for special edge grinding applications. Dimensions and weights: Length approx. 3750 mm Width/Depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust extraction connection. Dust extraction port diameter: 160 / 160 mm Work table(s): Work table height adjustment: 550 mm Work table traverse: 690 mm Electrical data: Power of height adjustment motor: 0.37 kW Power of drive motor: 3.0 kW Connection voltage: 400 V Phase(s): 3 phases Type of current: AC Mains frequency: 50 Hz Grinding unit: Grinding belt length: 7000 mm Grinding belt width: 150 mm Belt speed(s): 17 m/s Grinding shoe length: 270 mm Grinding shoe width: 150 mm

Condition: as good as new (ex-display), Year of construction: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 "Z" Designation for RTC 135 5257452 Vacuum table with electric fan 3 kW 5257453 Oscillating belt air-blast device for 5257454 Oscillating belt air-blast device for 5257462 Reinforced motor 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for 5257499 Grooved rubber pressure roller, 2nd position 5257500 Grooved rubber pressure roller, 3rd position 5257504 Infinitely variable conveyor feed with inverter 5257605 Door with inspection window 5257606 LED lamp for internal illumination TECHNICAL DATA Dimensions and Weights Length (product) approx. 1800 mm Gsdpfx Ahoy Ehiwonsud Width/depth (product) approx. 2000 mm Height (product) approx. 2070 mm Extraction Connection Number of extraction ports: 2 Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Height adjustment motor power: 0.25 kW Output power (motor power): 11 kW Sanding Unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Max. sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Workpiece Min. workpiece height: 4 mm Max. workpiece height: 170 mm Product Information EU 2023/2854 Type of generated data: usage data Format of generated data: common, machine-readable formats, e.g., JSON Data volume: up to 5 MB Continuous real-time data generation: yes Data storage location: on the device and a remote server Data access: on the device and via physical and wireless interfaces Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Holzkraft Edge Sander Type: KSO 200 F with Veneer Sanding Attachment Sanding unit can be swiveled up to 45° via a lever The machine stand made of welded steel guarantees high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for better sanding results Oscillation can be switched on/off as required Sanding pad with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table to utilize the entire width of the sanding belt Height-adjustable auxiliary table with dust extraction for sanding radii The spring-loaded belt tension automatically compensates for belt length differences. With double dust extraction Extendable roller table extension With rubber-coated sanding roller Veneer edge sanding attachment with contact shoe with fine adjustment, relief rollers and guide rails With grooved infeed guide for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding is possible Dimensions and Weights Length approx. 1900 mm Width/Depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Connection for dust extraction Dust extraction nozzle diameter 140 / 100 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Power of drive motor 3.0 kW Connection voltage 400 V Gedpfxslht H No Ahnjud Sanding unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt running speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, Rapid belt tensioning via lever Upper belt support with graphite coating 250 mm diameter weighted belt pulleys ensure optimal drive. With electric height adjustment With dust extraction and noise reduction features With noise reduction certificate With two speeds Adapts to surfaces through a pivoting sanding shoe For processing beveled surfaces Standard with right and left rotation The rapid belt tensioning enables quick and easy changing of the sanding belts. Delivered partially assembled Gjdpfx Ajff Hdbohnoud Dimensions and weights Length approx. 4540 mm Width/Depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Dust extraction nozzle diameter 2 x 140 mm Work table(s) Work table height adjustment 620 mm Working width max. on table 900 mm Electrical data Power of height adjustment motor 0.37 kW Power of dust extraction motor 0.75 kW Power of drive motor 3.3 / 4.5 kW Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Sanding unit Sanding belt length 8100 mm Sanding belt width 150 mm Belt speed(s) 9 / 18 m/s Sanding shoe length 360 mm Sanding shoe width 150 mm Workpiece Height max. 590 mm Height max. workpiece longer than work table 180 mm Explanation of height max. workpiece longer than work table: Processing of the workpiece with an overhang to the right over the work table is possible.

Condition: like new (used), Year of construction: 2025, Holzkraft Edge Sanding Machine Model: KSO 200 F with veneer sanding equipment Sanding unit tiltable up to 45° via lever The machine frame is made of welded steel, ensuring high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be activated as needed Sanding shoe with graphite coating for extended belt life Height-adjustable sanding table to utilize the entire sanding belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tension automatically compensates for belt length variations Double extraction system Extendable roller table extension With rubber-coated sanding drum Veneer edge sanding device with fine-adjustable contact shoe, pressure rollers, and stop rulers Infeed ruler with groove for overlapping veneer Quick changeover from veneer edge to solid wood sanding possible Dimensions and Weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Suction nozzle diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Working Tables Working table length 960 mm Working table width 350 mm Godoy Iu N Aspfx Ahneud Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Connection voltage 400 V Sanding Unit Abrasive belt length 3000 mm Abrasive belt width 200 mm Belt speed(s) 20 m/s Sanding surface length 1050 mm Sanding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg — Immediately available —

Condition: new, Year of construction: 2025, Edge grinding machine with an overhead feed mechanism What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table, featuring a rubberized feed belt and an overhead pressure bar. This significantly simplifies the grinding and production of bevelled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it provides assistance when processing exceptionally large or small parts. The feed speed can be continuously adjusted between 3 and 15 m/min. A soft conveyor belt at the bottom and rubberized rollers on the upper pressure bar gently convey the material. An optional second, lower conveyor belt is also available. The upper pressure rollers can also be replaced with a rubber band, which is particularly helpful when grinding extremely small parts. The Uniq-S is recommended as an all-rounder that enables all types of processing – from solid wood to fine veneer edges – with high quality. The continuously adjustable feed speed allows for optimal adaptation to the material. 1. Grinding station: “Veneer side” 2. Grinding station: “Solid wood side” 3. Grinding station: “Additional table” Gjdpfxjhqb Rcj Ahneud 4. Grinding station: “Half-round table” Location: Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Holzkraft Edge Sander: KSO 150 F PRO With oscillating sanding belt for the best sanding results Item number: 5390020 Brand: Holzkraft Gsdjv Sk Nnepfx Ahneud Sanding unit can be pivoted using a hand crank The welded steel machine stand guarantees high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for better sanding results Oscillation can be optionally activated Granite-coated sanding sole for a longer sanding belt service life Height-adjustable sanding table for utilizing the entire sanding belt width Additional table with extraction openings for sanding radii on the rubberized guide roller Sanding sleeve device with attachable work table The spring-loaded belt tension automatically compensates for belt length differences With adjustable stops, ideal for veneer sanding The grooved veneer stop allows the veneer overhang to be adjusted TECHNICAL DATA Dimensions and Weights Length (product) approx. 1700mm Width/Depth (product) approx. 1000mm Height (product) approx. 1150mm Net weight approx. 300kg Extraction connection Number of extraction nozzles: 2 Extraction nozzle diameter: 100mm Worktable(s) Worktable length: 950mm Worktable width: 450mm Worktable height adjustment: 110mm Electrical data Connection voltage: 400V Mains frequency: 50Hz Oscillation motor power: 0.11kW Sanding unit Sanding belt length: 2640mm Sanding belt width: 150mm Belt rotation speed(s): 14m/s Oscillation stroke: 15mm Sanding surface length: 800mm Sanding surface width: 150mm Sanding unit pivoting 0 – 45° SCOPE OF DELIVERY 1x Sanding Belt K100 5x Rubber Rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x Sanding Sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm On-Board Tool Kit Miter Gauge

Condition: excellent (used), Year of construction: 1983, Johannsen Long Belt Sander T 82 - K Pneuma - Air-cushioned sanding pad - Max. workpiece length: 2800 mm - Table width: 950 mm - 5.5 kW main motor - 2.2 kW fan motor - Sanding belt width: 160 mm Guedpfx Asxpmtyjhnsd - Extraction connection diameter: 180 mm - Right/left rotation - Handwheel adjustment - Overall dimensions (L/W/H): 4080x1800x1400 mm - Weight approx. 1000 kg Location: ex stock Saarland - immediately available -

Condition: excellent (used), Year of construction: 1993, Enorm edge sanding machine (now Kündig) In very good condition. Type: LBK 160 Year of manufacture: 1993 With veneer edge sanding attachment Oscillation can be switched on. Electric height adjustment of the sanding unit Table can be tilted up to 45 degrees Gjdjzbyt Eopfx Ahnjud Sanding belt width 150 mm Sanding belt length 2600 mm 3 kW motor 2 additional motors for height adjustment and oscillation With feed system Weight approx. 400 kg Location: in stock at 54634 Bitburg - immediately available -