Year of construction: 1977, Condition: ready for operation (used), Dimensional range: M6-M14, length range: 110mm, number of strokes min./max.: 110strokes/125strokes/min, max. wire diameter: 15mm, slide stroke: 160mm, pressing force: 100t, oil capacity: 70l, oil type: CLP 68, clutch manufacturer: Ortlinghs, air consumption at 30 operations/min: 800l/min, weight: approx. 23000kg. Duebujt Nhmho Tfryet

Condition: new, Year of construction: 2024, Functionality: fully functional, total height: 2,430 mm, drop-through hole in table: 150 mm, table width: 850 mm, table length: 570 mm, overall weight: 5,000 kg, pressing force: 60 t, Eccentric C-frame press 60 ton. NEW machine Pressing force 60 ton. NOMINAL LOAD CAPACITY POINT 4 mm MAX. HEIGHT OF CLOSED DIE 310 mm STROKE ADJUSTMENT (SEMI-AUTOMATIC) 20/100 mm Speed 60 SPM Diameter of die mounting hole 50 mm Throat depth (hole center to the back) 275 mm Dsbu Tfovnq Tlsryout Ram adjustment STROKE 80 mm RAM DIMENSIONS 580 x 350 mm Table dim. 850 x 570 mm DIAMETER OF THE TABLE HOLE 150 mm TABLE HEIGHT FROM THE FLOOR 795 mm Weight approx. 5,000 kg Height 2430 mm Depth 1370 mm Width 1265 mm MOTOR POWER 5.5 KW

Condition: new, AYEL-TECH WORKSHOP PRESS TYPE WP 100 - Capacity 100 tons - Cylinder stroke 400 mm - Working width 1000 mm - Cylinder is moveable - Electric or manual operation Dusbu Tjgg Nq Usfryot - Pressure gauge - Emergency stop - 400V CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE

Condition: excellent (used), total height: 3,950 mm, Hydraulic press single column PHY 160 C with die cushion, year of manufacture 2007 Dujbu Tfsvy U Eieryst - latest UVV - machine can be repainted on request Pressing force: 160 t Installation height: 800 mm Stroke: 600 mm Table size: 1000 x 700 mm Drawing cushion: 40 t; stroke: 300 mm Weight: 11 t Connection: 22 KW - path - pressure - time - dependent ram setting - light curtain (single-stroke, two-stroke, protective operation) - vibration feet

Condition: new, Year of construction: 2025, with the following standard equipment: chrome-plated cylinder, welded steel frame, oil pressure gauge, pressure adjustment Optional equipment available at extra cost: Pressure regulator, V-block, automatic control, hydraulically movable cylinder Dobu Tsrc A Tzefryeut Pressure: 80 t Stroke: 400 mm Total power requirement: 3 kW Machine weight: 725 kg Space requirement: 900 x 1560 x 2400 mm Passage in table: 900 mm Working speed: 5.4 mm/sec Return speed: 8.3 mm/sec

Condition: ready for operation (used), Pressing force: 1250kN, stroke rate: 55/min, max. switching frequency: 50/min, ram stroke: 8mm-120mm, ram adjustment: 80mm, power: 7.5kW, safety clearance: 340mm, weight: approx. 8700kg. The machine has a hairline crack on the main shaft. On-site inspection is possible. Duebu Tfsukh Alsryet

Condition: new, pressing force: 60 t, cylinder stroke: 400 mm, AYEL-TECH WORKSHOP PRESS TYPE WP 60 Debu Tfegg Nq Rorysut - Capacity 60 tons - Cylinder stroke 400 mm - Working width 1000 mm - Cylinder is moveable - Electric or manual operation - Pressure gauge - Emergency stop - 400V CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE

Condition: new, Year of construction: 2023, Nominal press force of 1,000 kN Piston stroke, in steps adjustable 16 to 140 mm Dujbu Tfrodulidjyot Tappet adjustment 90 mm Throat depth 295 mm Number of strokes in the idle 70 / min Mould installation height at Größthub down and adjustment up 420 mm *. Table clamping area (Wxd) 1,050 x 660 mm Plunger clamping area (Wxd) 640 x 460 mm Pin hole in the tappet 65 H 7 mm Power of main motor 7,5 kW Height of the machine 3,085 mm Weight of machine 8,500 kg, hydr. Overload protection, automatic slide adjustment, semi automatic stroke adjustment, latest UVV

Year of construction: 2011, Condition: ready for operation (used), Two heated hydraulic presses are available. 1) Italpresse GL9-6/188, year of manufacture: 2011, press force: 300t, spec. press force: 43kg/cm², cylinder: 6, cylinder diameter: 140mm, table dimensions X/Y: 1400mm/600mm, opening height: 400mm, heating plates: electric, drive power: 5.5kW. 2) Joos HP S80, year of manufacture: 2011, pressing force: 80t, plate dimensions X/Y: 2500mm/1250mm, piston diameter: 80mm, operating pressure: approx. 385bar, spec. pressing force: 2.5daN/cm², cylinders: 4, heating: electric, machine dimensions X/Y/Z: approx. 2900mm/1500mm/2100mm, weight: approx. 3300kg. On-site inspection is possible. Duebuougmxpj Tfryst

Year of construction: 2002, Condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Dsbu Tsum U Sxjfrysut

Year of construction: 1995, Condition: ready for operation (used), A Gebrüder Edelhoff punching machine is available. Pressing force: 80t, stroke adjustment: 20mm-80mm, ram adjustment: 100mm, stroke rate: 30-200/min, motor power: 15kW, weight: approx. 9500kg. Including reel AMT CA 300/R7-60. The machine occasionally has a problem with the speed, as it increases by itself. This is probably due to the wiring harness. An on-site inspection is possible. Dusbujuhqcbs Tfryot

Year of construction: 1971, Condition: ready for operation (used), Working width: 3500mm, max. sheet thickness: 4mm, machine dimensions X/Y/Z: approx. 3800mm/1500mm/1900mm, weight: approx. 9000kg. The machine has a leak on the right cylinder. Documentation available. On-site inspection is possible. Debeuh Az Nju Tfryout

Year of construction: 2000, Condition: ready for operation (used), A high-performance cold press is available for pre-pressing diamond segments in tools. Main cylinder: 2, cylinder diameter top/bottom: 100mm/100mm, cylinder stroke top/bottom: 180mm/150mm, max. operating pressure: 300bar, press force: 235kN. Die clamping cylinder: 2, piston diameter: 63mm, cylinder stroke: 15mm, max. clamping force: 62kN, max. operating pressure: 200bar, piston area: 31.2cm². Weighing stations: 2, weight range: 1g-50g, accuracy: +/-0.05g, powder hopper volume: 12l. Machine dimensions X/Y/Z: approx. 1800mm/1000mm/1900mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible. Debu Tfreuii Swjyout

Year of construction: 2003, Condition: ready for operation (used), There are 3 retrofit Feintool fineblanking presses with controls from Pneutronik available. 1) Feintool GKP-F 160, year of manufacture: 2001, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, max. material thickness: 6mm, stroke height: 62mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. 2) Feintool GKP-F 160, year of manufacture: 2003, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, material thickness: 6mm, stroke height: 60mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. Presumably there is bearing damage to the flywheel. 3) Feintool GKP-F 250, year of manufacture: 2000, total pressing force: 250t, head pressure: 75t, table pressure: 75t, ejector force: 18t, material thickness: 10mm, lifting height: 61mm, machine dimensions X/Y/Z: approx. 2100mm/3100mm/3200mm, weight: approx. 14500kg, control: Pneutronik. Presumably there is bearing damage to the worm shaft. Documentation available. On-site inspection is possible. Debu Tfrou Dalyeyeut

Condition: ready for operation (used), Pressing force: 440kN, working width: 1600mm, cylinder stroke: 150mm, travel X/R: 400mm/200mm, adjustment speed R-axis: 200mm/s, installation height: 400mm, throat depth: 200mm, machine stand distance: 1530mm, motor power: 7.5kW, weight: approx. 2100kg. Including various accessories and tools. Documentation available. On-site inspection is possible. Dujbou N Hc Nsu Tfryjt

Year of construction: 1982, Condition: ready for operation (used), Pressing force: 1961kN, working width: 4000mm, table width: 200mm, working height: 800mm, stroke rate: 28/min, clear width: 3450mm, motor power: 22kW, length: 4420mm, width: 2060mm, height: 3800mm, weight: 22.66t. With comprehensive documentation, machine with age-related signs of use and wear, associated dies and matrices in usable but heavily worn condition. On-site inspection possible. Dobjuy T H Aou Tfryeut

Year of construction: 1970, Condition: ready for operation (used), Pressing force: 45t, cutting area: 1000mm², stroke adjustment: 20mm-100mm, ram adjustment: 45mm, stroke rate: 60 strokes/min, table dimensions X/Y: 730mm/500mm, opening in table: 180mm/180mm, table height: 710mm, ram area: 350mm/220mm. On-site inspection is possible. Dujbevr Ed Hsu Tfryst

Condition: ready for operation (used), Press force: 160t, stroke adjustment: 20mm-140mm, stroke rate: 10-60 strokes/min, table dimensions X/Y: 1050mm/820mm, opening in table: 300mm/300mm, ram adjustment: 100mm. On-site inspection is possible. Dusbujvr Edye Tfryet

Year of construction: 1982, Condition: ready for operation (used), Stroke speed: 57-86/min, ram adjustment: 63mm, including documentation. Duebsi Ati Nsu Tfryet

Year of construction: 1987, Condition: ready for operation (used), Installation height: 408mm, max. working pressure: 315bar, max. pressing force upper piston/lower piston: 630kN/100kN, upper piston retraction force: 71kN, max. stroke upper piston/lower piston: 160mm/80mm, overtravel: 26mm, overtravel time: 106ms, safety distance: 169mm, hydraulic oil capacity: 250l, weight: approx. 3700kg, operating hours: 9283h. Documentation available. On-site inspection is possible. Duebu Tfjuxdi Eoryot

Condition: ready for operation (used), Maximum forming capacity at full length: 9 gauge (mild steel), corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg. Duobu Tfetia Hhjryst

Year of construction: 2003, Condition: ready for operation (used), Press force: 400t, stroke rate: 15-120/min, stroke adjustment (defective): 30mm-210mm, fixed stroke: 186mm, ram adjustment: 150mm, overall height: 350mm-576mm, max. belt width: 600mm, table dimensions X/Y: 2000mm/1400mm, shuttle tables on rails: Blue (220mm) and red (250mm), parts conveyor belt X/Y: 800mm/1800mm, dimensions X/Y: 20000mm/6000mm, operating hours: 32000h. Including conveyor system and change trolley. Documentation available. On-site inspection is possible. Dsbu Tfrotyyn Teysut

Condition: ready for operation (used), Punching force: 40t, working range: 1500mm/900mm, max. sheet thickness: 4mm, dimensions X/Y/Z: approx. 3700mm/1700mm/1900mm, weight: approx. 2500kg. Including various stamps. Dujbjt Amdrju Tfryet

Year of construction: 1976, Condition: ready for operation (used), Pressing force: 400t, table length: 890mm, table width: 780mm, stroke: 180mm, ram stroke: 30-300mm, ram adjustment: 125mm, stroke rate: 55/min, safety distance: 400mm, drive power: 15kW. Machine dimensions X/Y/Z: approx. 2800mm/1000mm/3000mm, weight: approx. 14000kg. Dsbougmw Seu Tfrysut

Year of construction: 1996, Condition: ready for operation (used), Pressing force: 1500kN, max. sheet thickness: 2.5mm (at 450N/mm²), max. tool dimensions X/Y: 350mm/650mm, max. tool weight: 270kg, working speed: 13mm/s, ram stroke: 500mm, weight: approx. 10800kg. Dusbuotxbzxj Tfryot