Condition: reconditioned (used), We sell used, checked, fully functional Dcelqujvyrx Tetczsg Arburg Thermonic controllers Model Si.FF10 G250/500 Price EUR 100.-- per unit / free delivery within Germany - EU and third countries ex works 10 units available On-site viewing possible - please arrange an appointment

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, clamping force: 8 kN, screw diameter: 105 mm, displacement volume: 4,156 cm³, injection pressure: 2,090 bar, injection weight: 3,740 g, Clamping unit: Clamping force 8000 kN Mould opening force, max. 620 kN Size of mould platens (h x v) 1650 x 1470 mm Distance between tie bars (h x v) 1170 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 180 kN Injection unit: Screw diameter 105 mm Ls/D ratio 20 Injection pressure 2090 bar Stroke volume 4156 ccm Shot weight (PS) 3740 gr. Injection rate 1520 ccm/s Screw speed 130 1/min Plasticising rate max. 99 g/s Nozzle pressure 150 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 110 kW Installed heating capacity 85,5 kW Adjustable barrel heating zones 8 Oil Reservoir capacity 1600 ltr. Dimensions and weights: Dimensions of the machine ca. 10,4 x 3,0 x 3,0 m Delqsur Haxjutczjcg Total machine weight 55000 kg Max. mould weight 13000 kg Accessories: - Anti vibration pads - 2 x 24 zones water flower - degassing screw Additional Options: - Robot interface - 1 x Air valve - 5 x hydraulic core pulls - 6 x hydr. sequentional valves

Condition: good (used), Functionality: fully functional, 3 sections Dcolqovu Dz Asutczjg Fully functional!

Condition: excellent (used), Year of construction: 2004, operating hours: 75,000 h, clamping force: 400 kN, screw diameter: 30 mm, injection pressure: 2,470 bar, injection weight: 97 g, Arburg 270C-400-250 + robot Multilift and conveyor belt, bimetallic barrel (3) Year of production: 2004 TECHNICAL DATA Screw Dia [mm]: 30 Shot Weight [g]: 97 Injection Pressure [bar]: 2470 Clamping Force [kN]: 400 Tie Bar Distance [mm]: 270x270 Platen Size [mm]: 446x446 Mould Height min. [mm]: 200 CONTROL Type of Controls: Selogica Monitor: Yes Control Cabinet: Yes Language: German OTHER Power [kW]: 18,4 Workinghours [h]: 75000 Dimensions [m]: 4 x 2,2 Weight [kg]: 1980kg + 300kg robot CR - CORE PULL R - ROBOT Dolqutsvu Tnreczjcg without hopper

Condition: as good as new (ex-display), Year of construction: 2024, Pneumatic Glazing Bead Saw Type GLSP-200N-AV Pneumatic Automatic saw feeding Pneumatic work piece clamping Adjustable table height 2 x 45° motors Accessories: HM Saw blade 200 x 2.2 x 32mm HSS Saw blade 103 x 2.0 x 32mm Z=60/45° Right HSS Saw blades 103 x 2.0 x 32mm Z=60/45° Left Glazing Bead Simulation- System With feed cylinder, 1 Revolver stop with 16 stops and 4 clamping cylinders Fixtures for 2 Glazing Beads, support Dolqusuydgotczjcg And leg adjustable for simulation Exhaust support D=80mm

Year of construction: 2016, Condition: new, Functionality: fully functional, HDPE Film washline construction year: 2016 0 working hours (was never in operation) brand: NEUE HERBOLD, D-74889 SINSHEIM consisting of: Wet-granulator type SM 450/600-S5-2 Friction washer type FW 560/3000 Conveying screw Floating tank (Floating - sink separation) type TB 500 Dcolqujtuui Detczjg Mechanical Dryer type TM 1005 Suction Unit type MFT 55/500 Electric control

Condition: like new (used), Year of construction: 2022, Engel duo 17060/2000 injection molding machine Year of production -2022 Robot viper 60 - RC300 integrated Z= 4280 mm X= 1800 mm Y= 2600 mm Injection system Screw diameter mm 135 Screw pitch mm 610 Maximum injection capacity cm³ 8731 Screw speed min⁻¹ 125 Screw torque Nm 14000 Maximum screw speed at reduced torque min⁻¹ 135 Reduced torque at max. speed Nm 12963 Reduced screw speed at max. torque min⁻¹ 112 Maximum screw torque at reduced speed Nm 15630 Regeneration efficiency (3-zone screw) g/s 222.9 Regeneration efficiency (barrier screw) g/s 279.2 Injection Injection efficiency cm³/s 1904 Injection volume cm3 8731 Injection weight g 7860 Injection pressure (regeneration) bar 1648 Injection pressure (maximum) bar 2000 Nozzle Nozzle stroke mm 1100 Nozzle pressure force kN 210 Material cylinder L/D ratio - 25 Heating zones (including nozzle) - 8 Heating power kWel 88.5 Closing system Closing force kN 20000 Minimum closing force kN 2000 Opening force (with pressure cushion) kN 1600 Force opening kN 614 Opening stroke mm 3000 Max. distance between platens mm 3800 Min. mould height mm 800 Max. mould height mm 1800 Djlqutsv Iz Umjczecg Spacing between tie bars (h x v) mm x mm 2000 x 1600 Size of mould plates (h x v) mm x mm 2700 x 2430 Max. mould weight (moving platen) kg 41330 Max. mould weight (stationary platen) kg 41330 Max. total mould weight kg 62000 Dry cycle stroke (Euromap 6) mm 1400 Dry cycle time (Euromap 6) s 5.5 Ejector Ejector stroke mm 400 Ejector force kN 385 Drive Installed power of main motors kW 265 Capacity oil tank (injection unit) l 1600 Oil filter Max. cooling capacity (at 25°C) kWcool 43.2 Water consumption (at 25°C) m³/h 6.3

Condition: ready for operation (used), Year of construction: 2006, operating hours: 54,535 h, Functionality: fully functional, clamping force: 3 kN, screw diameter: 45 mm, displacement volume: 305 cm³, Stock-No. 13973 Manufacturer Krauss Maffei Type of machine KM 300 – 1000 C1 Year 2006 Working hours 54535 h Controlversion MC 4 Screentext German Dcjlqutcoucc Avszeg Location Eschweiler - Germany Clamping unit: Clamping force 3000 kN Mould opening force, max. 160 kN Travel force movable platen opening 86 kN Travel force movable platen closing 68 kN Size of mould platens (h x v) 995 x 1050 mm Distance between tie bars (h x v) 630 x 630 mm Mould opening stroke 820 mm Mould height min 330 mm Max. daylight 1150 mm Hydraulic ejector - stroke 200 mm Ejector force 58 kN Injection unit: Screw diameter 45 mm Ls/D ratio 22 Injection pressure 2336 bar Stroke volume 305 ccm Shot weight (PS) 278 gr. Injection rate 200 ccm/s Screw speed 342 1/min Plasticising rate max. 37 g/s Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Installed heating capacity 19 kW Adjustable barrel heating zones 5 Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 6,20 x 2,20 x 2,40 m Total machine weight 14370 kg Max. mould weight 3430 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR 150 X: 900 mm Y: 1400 mm Z: 2500 mm C: 90 ° Additional Options: - 1 x air valve - 2 x core pulls - 16 x hotrunner controllers

Condition: used, Year of construction: 2003, Vertical pressure machine designed to produce pressed rubber and plastic parts by vulcanization. Manufacturer: RUTIL Type: VERTICALE DAS 100/30 RP Year of manufacture: 2003 Technical parameters: Injection volume: 100 cm3 Injection pressure: 1480 kg/cm3 Dcjlqueuntc Ejtczsg Nozzle diameter: 22 mm Hydraulic motor: 75 cm3 Max. operating pressure: 200 kg/cm2 Heating plates: 350 x 300 mm Closing force: 30 tons Minimum form: 130 mm Movable plate lifters: 350 mm Installed power: 21 kW Dimensions: width: 1400x1700 mm, height: 3050 mm Weight: 3300 kg . Full technical documentation. Technical condition: used machine, working until taken out of production

Condition: ready for operation (used), Year of construction: 1986, clamping force: 27 kN, screw diameter: 175 mm, Injection molding machine WINDSOR (Germany ) Type: W2700 Year of construction : 1986 with a revision in 2018 Clamping force: 27000 kN (2700to) Opening stroke: 2180 mm Installation height: 500 mm Delet Eat Sjqutczscg Vertical clamping dimension: 2750 mm Horizontal clamping dimension: 1900 mm Distance between vertical tie bars: 1400 mm Horizontal tie bar spacing: 2240 mm Centering DS / AS: 250 mm Max. injection volume: 15,300 / 48,000 ccm screw diameter: 175 mm The machine can be inspected under power. ___ Our general terms and conditions apply, and the seller is not liable for typing or data transmission errors. The appearance of the items on offer corresponds to their age and the pictures shown. The technology and wear of the items on offer are in keeping with their age. Used machines are sold exclusively to traders and without warranty.

Year of construction: 2019, Condition: new, machine/vehicle number: BI3, Tempering furnace for stress relieving and forming acrylic glass The furnace has two doors on one side and 2 narrow doors with rail system on the back. The sheets are hung there and pneumatically clamped with foot switch and released again. - The oven has a maximum temperature of 230°C and a permanent deviation around the set temperature of +/-3°C at 75°C . - The internal dimensions are approx. width 1600 x depth 2000 mm. The height of the oven in the rail system can accommodate a 1800mm high free-hanging panel. Djleb Nzycjqutczscg - You can see the rail system on the attached pictures. The rail system can also be mounted on the front side. It can accommodate panel thicknesses from 1.5 to 25mm and can support a maximum panel weight of 150kg. - The power can be adjusted in several steps. - Air circulation approx. 3.000 m³/h - doors can also be opened from the inside for safety reasons - Safety device which also switches off the heating in case of fan failure.

Year of construction: 1994, Condition: good (used), -Cutting mill / granulator -working width: 600 mm -rotor diameter: 400 mm -with sound insulation Dcolqutcjh Havtozog

Condition: good (used), Functionality: fully functional, Manufacturer Dupslaff GmbH Type E 400 S Dcolqevutmneutczeg 2 pieces available Price 850 EUR per piece

Condition: ready for operation (used), Year of construction: 2006, operating hours: 43,485 h, Functionality: fully functional, clamping force: 2 kN, screw diameter: 45 mm, displacement volume: 305 cm³, Stock-No. 13972 Manufacturer Krauss Maffei Type of machine KM 200 – 700 C1 Year 2006 Controlversion MC 4 Screentext German Working hours 43000 h Clamping unit: Clamping force 2000 kN Mould opening force, max. 101 kN Travel force movable platen opening 50 kN Travel force movable platen closing 42 kN Size of mould platens (h x v) 915 x 915 mm Distance between tie bars (h x v) 560 x 560 mm Mould opening stroke 700 mm Dolqutcsuccyuozjcg Mould height min 350 mm Max. daylight 1050 mm Hydraulic ejector - stroke 200 mm Ejector force 58/28 kN Injection unit: Screw diameter 45 mm Ls/D ratio 22 Injection pressure 2336 bar Stroke volume 305 ccm Shot weight (PS) 278 gr. Injection rate 200 ccm/s Screw speed 342 1/min Plasticising rate max. 37 g/s Nozzle pressure 84 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 30 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 525 ltr. Dimensions and weights: Dimensions of the machine ca. 5,50 x 2,20 x 2,30 m Total machine weight 10.530 kg Max. mould weight 2535 kg Accessories: - Anti vibration pads - 4-fold water flower - Conveyor 2000 x 500 x 1000 mm - Krauss Maffei Robot LR100 X: 550 mm Servo Y: 1200 mm Servo Z: 2500 mm Servo C: 0 - 90° pneumatic Additional Options: - 1 x air valve - 16 x hot runner controller - 2 x hydr. core pull - 4 x pneumatic sequentional valve

Condition: used, A pressure machine designed to produce pressed rubber and plastic parts by vulcanization. Manufacturer: LWB Steinl Injection volume: max. 75 cm3 Dcjlqsu Snwtsutczeg Injection pressure: max. 1000 bar Closure body: max. 300 kN Heating flap size: 300 x 300 mm Voltage: 380V, 50 Hz, 63A High-pressure pump capacity: 23 l/min Motor power: 7.50 kW Year of production: 1998 Technical condition: used machine, working until taken out of production

Year of construction: 2020, Condition: excellent (used), Chiller SBS 330 built in 2020 for sale from our rental park. System receives new maintenance and leak test on takeover. Cooling capacity at 7/12°C and 35°C ambient temperature 320kW. The chiller has compressor sound insulation enclosures, winter package, low pressure and high pressure gauges, low water version, electronic expansion valves, X-Web, flange connections, Dcolqutcei Ab N Hszsg

Condition: excellent (used), Year of construction: 2002, Arburg 320S 500-150 injection molding machine WITH SIDE MULTILIFT ROBOT Year of manufacture 2002 Selogica control Closing zone Closing force 500 kN Dolqsqqkg Aeutczscg Minimum mold height min 225 Column spacing 320 x 320 mm Dimension of mounting plates 472 x 472mm Opening stroke of mold 350mm Maximum opening width 575mm Injection unit Screw diameter 30mm Injection weight (ps) 71g Injection volume 78 cm3 Specific injection pressure 2210 bar Power supply and dimensions Pump motor power 15 kW Heater power 8.4 kW Installed power 26 kW Weight of the machine 2.25t

Condition: excellent (used), Year of construction: 2006, Single-screw extruder Battenfeld BEX 1-75-30:B with co-extruder BEX 35-30:B Application for PE, PP Year of manufacture 2006 Screw diameter 75 mm Drive Baumüller 171 KW RPM 2,450 Total output approx. 850 kg/h The extruder was converted to frequency drive by Battenfeld in 2014, new three-phase motor and frequency converter Gearbox was overhauled in July 2024 Condition: it is in very good condition Last application PE pipes Dolqueug Edketczscg Battenfeld co-extruder BEX 1-35-30:B Application PE PIPES Connection value: 69 Kva Output approx. 110 kg/h Year of manufacture: 2010 The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Germany

Condition: used, Year of construction: 2004, Functionality: fully functional, Year: 2004 Dslquev H Sb Ijtczocg - technically efficient - Corner cleaning machine SV 530 + WT - Four-head welding machine AKS 6105/4 (welding dimensions: 3500x2500 mm) + TBA

Condition: ready for operation (used), Year of construction: 2003, Stock-No. 13439 Manufacturer Krauss Maffei Type of machine KM 150 – 700 - 160 CZ Year 2003 Working hours h Controlversion MC 4 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 1500 kN Mould opening force, max. 86 kN Travel force movable platen opening 45 kN Travel force movable platen closing 34 kN Size of mould platens (h x v) 780 x 790 mm Distance between tie bars (h x v) 500 x 500 mm Mould opening stroke 600 mm Mould height min 400 mm Max. daylight 1000 mm Hydraulic ejector - stroke 150 mm Ejector force 22/10 kN Injection unit: Screw diameter 50 / 25 mm Ls/D ratio 20 / 26 Injection pressure 1892 / 2500 bar Stroke volume 377 / 52 ccm Shot weight (PS) 343 / 47 gr. Injection rate 181 / 63 ccm/s Screw speed 255 / 367 1/min Plasticising rate max. 24 / 9 g/s Nozzle pressure 84 / 67 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 30 kW Installed heating capacity 22 kW Adjustable barrel heating zones 5 Oil Reservoir capacity 345 ltr. Dimensions and weights: Dimensions of the machine ca. 5,00 x 2,00 x 2,20 m Total machine weight 8200 kg Max. mould weight 1650 kg Accessories: - Anti vibration pads - 2 x 6-zone water battery - rotary table D: 610 mm Dcjlqutceub S T Iozjg Additional Options: - injection molding machine equiped with 2 x core pulls on movable plate - 1 x Air valve - Robot interface according to Euromap 12 - 16 x hot runner controller - Accumulator

Year of construction: 2020, Condition: as good as new (ex-display), Automatic machine for the production of disposable, foil gloves with a welder and hole cutter. Ideal for the production of PE/EVA/CPE gloves. Technical data: Model: SLQ-600 Glove length: 200-400 mm Glove width: 270-330 mm Foil thickness: 0.008-0.02 mm Efficiency 40-150 pieces / min Power: 1.5 kW Power supply: 230 V 50/60 Hz Weight: 600 kg Dcelqutcsh E Sp Rezeg Dimensions: 2300 x 1190 x 1500 mm Year of production: 2020 Includes a welding machine / hanging hole cutter: Model: BX 450 Power: 100 W Power supply: 230 V 50/60 Hz Weight: 25 kg Year of production: 2020 Technical condition: used machines, functional

Condition: new, DEMAG brake hood / brake cover ( new / used ) In different sizes !!! 23 pieces - new. Djlqutcju Uh Rpjzjcg 15 pieces used.

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, clamping force: 2 kN, screw diameter: 50 mm, BILLION 200 T injection molding machine Reference : Hercule H780/200 Year: December 2000 Dcjlou Iyyxsqutczjg Type of order: DIXIT 500 Screw diameter: 50 mm 8 Mould heating zones 2 hydraulic cores 1 Pneumatic core 1 Blowgun

Condition: ready for operation (used), Year of construction: 1997, Stock-No. 13602 Manufacturer Krauss Maffei Type of machine KM 650 – 8000 CM Year 1997 Working hours 80000 h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1704 x 1700 mm Distance between tie bars (h x v) 930 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Dcjlqueub S R Hotczog Ejector force 226 kN Injection unit: Screw diameter 130 mm Ls/D ratio 20 Injection pressure 1296 bar Stroke volume 6172 ccm Shot weight (PS) 5617 gr. Injection rate 1540 ccm/s Screw speed 138 1/min Plasticising rate max. 238 g/s Nozzle pressure 246 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 132 kW Installed heating capacity 70 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 12,00 x 2,80 x 2,70 m Total machine weight 43000 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: used, Automatic machine for producing plastic bags for T-shirts or shopping bags Manufacturer: COSMO Model: ST-99 Dcolquerww E Ietczog Bag size: - length: 350 - 650 mm - width: 160 - 365 mm - thickness: 0.008 - 0.05 mm Throughput: 180 - 300 pcs/min Installed power: 12 kW Power supply: 230 V, 3 phases, 50/60 Hz Dimensions: 7150 x 1600 x 1750 mm Additional air compressor required: 10 hp - not included Technical condition: used machine